Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by tqkxzugoaupvwqr on Friday March 22, 2019 @05:48AM
(#19460896)
The new lighting makes such a dramatic difference. Despite the same low polygon count, the levels seem much more lifelike. If all the game classics are re-released with raytracing engines, I will be all over it. The next years are going to be good.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by pizza234 on Friday March 22, 2019 @06:25AM
(#19461107)
I'm very skeptical.
This is not just RTT; there's a big amount of rework. Likely, any old game would look significantly better with such development effort (in other words, with any good remastering).
This could be considered a great market stunt - the graphical improvement is touted to be due to RTX (ray tracing), while it's actually due to many factors.
On top of that, it misleads people into thinking that this type of improvement is typical of ray tracing, and that it comes at virtually no cost, while currently, ray tracing takes a big performance hit, and it's generally hard to notice.
Q2VKPT is close to the concept "improved with ray tracing", and while certainly impressive, it doesn't yield the same "AMAZING!" effect.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by ladon86 on Friday March 22, 2019 @12:04PM
(#19463862)
But it's not down to polygons or details in the environment - the simple architecture still looks realistic with the addition of realistic lighting. In the quest for realism, modern games have so many details, dirt and grit everywhere [1]. Perhaps going forward artists can let the lighting do more work and still represent realistic clean environments. I loved this blocky room in Half Life 1 for the dramatic (prebaked) lighting: http://combineoverwiki.net/images/thumb/3/37/C2a4e_lobby.jpg...
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by int_19h on Friday March 22, 2019 @10:48PM
(#19468755)
How hard would it be to automatically derive such maps from textures? After all, they are already drawn to visually imply that with shading, so wouldn't it be possible to e.g. train a model to extract that information, just as our eye does?
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by karrotwaltz on Friday March 22, 2019 @06:36AM
(#19461149)
> it's actually due to many factors
To add to this point, at 1:35 in the video they compare with / without volumetric ligthing except, well, volumetric lighting has been used in games for a while now.
The "before" should show a non-RTX lighting instead of just nothing at all.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by rasz on Friday March 22, 2019 @11:13PM
(#19468837)
MMX was useless for games. MMX is Integer math only, good for DSP, things like audio filters, or making a softmodem out of your sound card. Unsuitable for accelerating 3D games. Whats worse MMX has no dedicated registers, and instead reuses/shares FPU ones, this means you cant use MMX and FPU (all 3D code pre Direct3D 7 Hardware T&L) at the same time.
All comes down to Microsoft and Intel coming up with a concept of purely software peripherals around 1997. Intel released things like MMX, AC'97, Communications and Networking Riser (CNR), and audio/modem riser (AMR) standards, all in an effort to push hardware vendors out of the market by handling those roles in software by the CPU. More work for CPU = more demand for fast CPUs = more profit.
Funnily enough AMDs 1998 3DNow! did actually add floating point support to MMX and was useful for 3D acceleration until hardware T&L came along 2 years later.
Intel Paid few dev houses to release make believe MMX enhancements, like POD (1997)
1/6 of box covered with Intel MMX advertising while game used it only for some sound effects. Intel repeated this trick in 99 while introducing Pentium 3 with SSE. Intel commissioned Rage Software to build a demo piece showcasing P3 during Comdex Fall. It worked .. by cheating with graphic details ;-) Quoting hardware.fr "But looking closely at the demo, we notice - as you can see on the screenshots - that the SSE version is less detailed than the non-SSE version (see the ground). Intel would you try to roll the journalists in the flour?". Of course Anandtech used this never released publicly cheating demo pretending to be a game in all of their Pentium 3 tests for over a year.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by jackfraser on Friday March 22, 2019 @01:04PM
(#19464488)
Glide, man, such a great era for PC gaming if you had the right equipment.
I'll never forgive the computer store guy when I was 14 who pushed me to buy the $40 cheaper S3 Trio3D instead of the Voodoo. Instead of something useful, I ended up with a glorified paperweight that only worked well for Direct3D. Guess how many games back then bothered to use that?
I think I got Quake 1 with some shitty hacked MiniGL driver working _once_.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by leonroy on Sunday March 24, 2019 @07:09AM
(#19475658)
Heheh, I ended up in the same boat. Enamoured with tile based rendering (and the lower price) I bought the PowerVR based Apocalypse 3dx which also had a shortage of supported titles.
All my school friends had 3dfx cards. Didn’t get to do 3D gaming until I bought a Radeon 8500 many years later!
Still have my 3dx actually...it was a very interesting card:
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by _bxg1 on Friday March 22, 2019 @04:22PM
(#19466526)
Given all the additions they should've placed less emphasis on the before/after. The really cool thing about the demo isn't "look how great a remastered version of Quake 2 can look", it's "look, we can run an entire game in real-time with nothing but raytracing, even if it requires a low polygon count". The Metro and Battlefield demos only use RTX for small pieces of their environment where it has the greatest effect; this is a whole level using no rasterization at all. The other improvements distracted from that somewhat.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by Justsignedup on Friday March 22, 2019 @12:34PM
(#19464201)
I was thinking the same thing. They re-textured and enabled RTX. So it would be nice to see the new game turn RTX on / off and see whats the actual difference. Just that feature.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by lanevorockz on Friday March 22, 2019 @07:35AM
(#19461539)
Not sure what can you be skeptical about. The difference from RT Quake to Quake it’s only that the lights are not precompiled at the beginning of the level. Any other game just need to rework the light baking step to use RTX and job done.
The only downside that can be pointed out is that you are hardware dependent. Would be amazing to see thing in a console, all games with dynamic lighting would help developer and gamers.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by mbel on Friday March 22, 2019 @07:54AM
(#19461654)
> The difference from RT Quake to Quake it’s only that the lights are not precompiled
In the linked demo video they also use new high resolution textures. Which include not only color data as in the original Quake, but also normal maps and maps with PBR parameters (metalness, roughness).
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by KallDrexx on Friday March 22, 2019 @10:11AM
(#19462646)
That's not the only difference shown in the video. IN the official keynote when Jensen was talking about it he specifically said the "RTX Off" was using the software rasterizer. So it's not comparing Vulkin RTX on with Vulkin RTX off but Vulkin RTX On with Software rendering on.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by navaati on Friday March 22, 2019 @06:04AM
(#19460978)
Now it's not like it's only an engine change, for this to work they added PBR layers (metalness, emission, normal, yada yada) to all textures here, and that's a big artistic work.
That said… gimme gimme gimme Half Life 1, plssssssss :D !
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by thecatspaw on Friday March 22, 2019 @10:31AM
(#19462841)
As someone passionate about hl1, I dont like Black mesa. Yes it looks nice, but gameplay wise it seems lacking to me. It feels very slow to move, bhopping has been nerfed to death.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by crysin on Friday March 22, 2019 @01:52PM
(#19465011)
From what I remember of Black Mesa, it felt more like Half-Life 2, control wise, than Half-Life. So for people who played Half-Life 2 first, Black Mesa probably feels more natural.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by sbarre on Friday March 22, 2019 @08:33AM
(#19461905)
Maybe teams could use tools like AI Gigapixel (discussed on here yesterday) to upsample older textures?
I agree with you that there is asset work to be done, but I bet there are tools out there that can simplify and automate this process quite a bit today.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by codetrotter on Friday March 22, 2019 @11:09AM
(#19463260)
I couldn’t find the tool you mentioned but I found a thread on another site about a GAN that can upscale images, and using that one to generate highres textures.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by yogthos on Friday March 22, 2019 @10:35AM
(#19462886)
I would love to see a kickstarter or something to create high quality assets for Open Arena, and add raytracing. Personally, I find that Quake 3 gameplay is more fun than any modern shooter that I've played. It's fast paced, and really well streamlined. It's just pure adrenaline.
Adding things like health regen, cover, alternate fire modes, and so on ultimately just distracts from the action in my opinion. We don't really have any more games like Quake nowadays.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by partiallypro on Friday March 22, 2019 @10:49AM
(#19463023)
It's cool, but even back in the day people that competitively played Quake 2 & 3 would turn down every detail to be very low, sans the resolution. In part because it helped with lag, but it also made spotting enemies much easier. The lighting in this demo is very nice, but at least in the Quake world, no one would really use it because it's very distracting, specifically the lighting.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by dahart on Friday March 22, 2019 @12:09PM
(#19463914)
I would use ray tracing to get a non-linear camera, specifically so I could have a wider field of view with less distortion than the linear camera & wide fov. Back on Q3, everyone would use 120 or 130 degree fov because that was the best compromise between seeing things to your side and everything getting squished into the center of your screen. If I could have played with 180, I would have.
Your lighting point is reasonable in the sense that this demo was made to demonstrate the dramatic lighting without respect to gameplay. On the other hand games are already clearly going toward HDR and physical and dramatic lighting. If Quake had HDR lighting, it would look just as good but it would be less distracting because it would have been directed and designed to support the gameplay.
This version also has dynamic adaptation which would have been awesome to have back in the day - some of the dark areas are too dark and it’s great to have the lighting automatically adjust so that at least I can see.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by mikepurvis on Friday March 22, 2019 @11:23AM
(#19463414)
Hopefully it doesn't become one of those annoying tropes, though. Like Photoshop lens flares— every game has to have a bunch of arbitrarily reflective materials and light shafts just because the hardware now makes it possible.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by tachyonbeam on Friday March 22, 2019 @11:29AM
(#19463488)
When bump mapping was starting to become a thing, every surface had to look ultra glossy for a while (example: http://mojolabs.nz/screenshot.php?id=1740). Eventually the excitement subsided and people used this effect more tastefully. I think most people are just happy with more natural looking lighting though.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by quadcore on Friday March 22, 2019 @10:22AM
(#19462746)
The original textures were done by Adrian Carmack. I think he's a genius as much as John. He was capable of making a difficult theme really work: a mix between dark future and fantasy. Specially fantasy with guns is terribly difficult and I don't recall having seen a game that succeeded in making that mix as well as the Quake series.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by gagege on Friday March 22, 2019 @12:27PM
(#19464136)
Maybe this isn't what you're talking about, but Bungie's game Destiny is a pretty great example of medieval fantasy transposed several thousand years into the future.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by shahar2k on Friday March 22, 2019 @08:56PM
(#19468331)
there's a ton of great art happening in games these days. and a lot of it comes down to a few factors, there are some excellent concept art outsourcing houses (check out opusartz for one) the tools and artists trained in them are EXTREMELY capable in recreating whatever style, and the technology available for real time can basically do a fantastic job at baking down extremely high poly high res assets to whatever the final system requires.
this is not to diminish artists working today. (I'm one of them!)
Adrian Carmack though, comes from a whole other breed of creators who had to be both artistically brilliant as well as technically resourceful enough to create art within EXTREMELY tight constraints.
the menagerie for doom, which he is responsible for are still a masterwork in readability, efficiency of design, and communication of purpose in many ways (the textures in that game very easily still hold up today)
I work with a ton of amazingly talented artist, and still, it's rare that I see both artistic, illustrative, and technical talent all in one person. (helps that teams are enormous and so those skills can be spread amongst multiple people)
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by jsgo on Friday March 22, 2019 @02:03PM
(#19465157)
Is it? I only played Destiny 2 and from the parts I really got into (pre-expansions), I didn't get a very medieval fantasy vibe at any points. Most of the architecture was fairly modern or alien. Was nice though.
Anthem has some buildings that have an older feel out in the freeplay areas, but even that would be a stretch.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by nessus42 on Friday March 22, 2019 @02:26PM
(#19465433)
It's much more apparent in Destiny 1, with the Hive architecture, which is like something out of Mordor. And in the Forsaken expansion to Destiny 2, where The Dreaming City seems like a high-fantasy kingdom, but under attack by evil forces.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by jsgo on Friday March 22, 2019 @04:34PM
(#19466618)
ah, nice. Can't remember if it was Hive or a different faction, but while playing the core game of D2, I thought it was nice because the environment you dealt with them reminded me a lot of Alien (without the xenomorph, obviously). I think that was one thing D2 did well: in the core game, there are multiple factions that are pretty distinct so it almost feels like different games at times.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by pornel on Friday March 22, 2019 @07:53AM
(#19461642)
I love RTX, but it's so hard to demonstrate it. It doesn't give presence of any "wow!" effect (apart from demos that overdo reflections), it only gives absence of incorrect shadows, and humans are bad at noticing absence of things.
Instead of "wow" you get "well, duh, that's how things should look".
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by kuzehanka on Friday March 22, 2019 @08:01AM
(#19461694)
Path tracing has huge wow factor. The problem with RTX is that on current gen hardware it runs at laughably low sample rates and the result is very noisy even after DLDN.
Games are handling this by dialling the amplitude of RTX effects way down and having a smoothing pass. After all that is done, the wow effect is gone and you're just left with a more dynamic version of the same or worse aesthetics that we're already used to.
I expect it'll truly take off on next gen hardware, whenever that rolls out.
My takeaway is yes that quake 2 demo looks really cool, but you just know that they used every black magic hack in the book to get there, and most of it can't be replicated in a modern high fidelity game. It's definitely not a case of flicking an 'RTX on' switch.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by kuzehanka on Friday March 22, 2019 @12:42PM
(#19464276)
Deep learning denoiser. I don't know if NVIDIA came up with some marketing term for it. It's what allows RTX to produce meaningful images at all despite the renderer running at 0.5-2 samples per pixel which looks little better than random noise. I kind of assumed they'd call it DLDN because they called their deep learning supersampling DLSS. I guess not, go figure.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by Wohlf on Friday March 22, 2019 @10:00AM
(#19462545)
I've noticed something similar with a lot of the game remakes from a few years ago, particularly the N64 Zelda remakes on 3DS. The remasters look how you remember the games back in the day, but if you compared them side by side the remakes look vastly better.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by mikepurvis on Friday March 22, 2019 @11:31AM
(#19463508)
Zelda 64 is a particularly interesting case, though. As such a beloved title with a long-standing fan following, there has been an almost endless parade of remakes/demakes over the 20 years since it came out.
If you thought the official 3DS one was pretty, wait until you see the fan work done on a UE4 version:
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by dahart on Friday March 22, 2019 @12:13PM
(#19463971)
That’s a good way to put it. There’s some kind of uncanny valley of rendering, I think. Not exactly the same idea, but I noticed this starting decades ago while playing on an SGI- the demos with flat shading oddly seem more impressive than the ones that had an environment map and chrome reflections. It felt like the computer was doing more work when the image was less realistic, and the more realistic it got, the less it felt like billions of amazing calculations were happening under the hood. It’s still true, and it’s ironic when I’m seeing these amazing demos today with real time path tracing and astounding amounts of complexity, the visceral feeling is more like looking at photos than amazement for how incredible the rendering is. I have to force myself to think harder about what’s going on in order to appreciate it.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by zamalek on Friday March 22, 2019 @12:22PM
(#19464075)
> humans are bad at noticing absence of things.
Until you ask them whether a scene is a photo or a render. They won't know to look for shadow acne, but they will still make a judgement that includes it. RTX has a few things that we've had for years, but it seems to do a way better job at energy preservation.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by apk-d on Friday March 22, 2019 @05:52AM
(#19460915)
Rtx really shines when applied to a low-fidelity game like Q2. The difference isn't as profound in modern titles where a plethora of lighting techniques and tricks approximates physical lighting closely, though.
I wonder if in the end (should we eventually see universal adoption) raytracing will prove more of a boon towards developers rather than end users, as it has been with many other hardware advancements.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by noir_lord on Friday March 22, 2019 @07:10AM
(#19461369)
> The difference isn't as profound in modern titles where a plethora of lighting techniques and tricks.
That's the key thing though, RTX removes the need for all those tricks (which are tricky to get right, humans are good at spotting lighting flaws in a scene) which is a net win for the game developers who can focus that time/effort elsewhere.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by omilu on Friday March 22, 2019 @08:19AM
(#19461805)
Ray tracing removes a huge development workload, you no longer have to think about modeling light. It's like real life, you simply have materials and light sources, and bang everything just works and looks natural.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by jplayer01 on Friday March 22, 2019 @06:00AM
(#19460958)
But... That's the biggest benefit of raytracing/path tracing. It's why the movie industry is already all-in on it and has been for years. It's just in games where for some reason gamers don't understand the benefits and are so eager to dismiss it if they don't immediately see everything look 10x more amazing or realistic, entirely missing the point.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by billfruit on Friday March 22, 2019 @10:47AM
(#19463011)
Perhaps many games do not require realistic light, rather some type of simplistic model serves gameplay well enough, I do not know what kind of light modeling was used in Sunset Overdrive, but that type of oversaturated lighting works for some games.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by kuu on Friday March 22, 2019 @06:15AM
(#19461037)
I guess better tools for developers could mean in a benefit for the player: less time working on one thing could mean more time in others, giving more room to improvement. I guess...
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by apk-d on Friday March 22, 2019 @10:53AM
(#19463065)
I'm somewhat sceptical because I'm not really seeing this happen anywhere throughout the software development industry. Sure, we get more software than ever, and we get it faster and cheaper, but it's all bloated low-quality (web\electron) apps that are often less usable than their ages-old counterparts. Same thing is happening to games in some extent - most developers choose development speed and convenience over performance.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by abrugsch on Friday March 22, 2019 @08:48AM
(#19462017)
yeah this exactly. I was half way through playing QII first time round when I went from Software to a VooDooII. I'll never forget firing a plasma rifle down a tunnel and watching the lighting effects coming off the bolt as it went down tunnel. There hasn't been such a step change in graphical capability as those days of going from a software renderer to a hardware one. (also at the same time, was unreal... I never understood why that one room near the start was "slippery" until I got that VooDooII and suddenly that room had a mirror finish and the slipperyness fell into place. I think real time ray tracing in games is now that next step change but even then, nowhere near as dramatic as software to hardware was back in the day.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by cyxxon on Friday March 22, 2019 @09:02AM
(#19462110)
I would argue that VR is the next step like this. Even taking an "old" title like Skyrim drives home that no matter how nice the renderer makes it look on a screen, it is still flat. With VR you are in the place.
Does the raytracing look really, really nice? Yes, definitely. Is it that much better? I don't think so (personal opinion, of course)...
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by mattnewport on Friday March 22, 2019 @11:11AM
(#19463287)
Working in VR, I think ray tracing is really going to come into its own with VR. Some of the effects that are mostly just nice visuals on a monitor actually make VR more usable. Accurate contact shadows for example are super important to our brain when picking up and putting down objects off surfaces to help get an accurate sense of distance and are extremely hard to do well with rasterization based techniques but they "just work" with ray tracing (given enough performance).
Other things like more accurate reflections and specular effects add more to VR where subtle head movements that don't produce the correct response our brain expects impact immersion even when we're not able to consciously identify why the rendering is not quite right.
The additional performance demands of VR mean it will be a while before we really see these benefits realized but I think when it all comes together it will really improve immersion.
There are some other potential benefits to basing VR rendering around ray tracing too that might take even longer to realize. For example you can directly compensate for the optics of the lenses when generating rays and avoid the whole post process warping step and foveated rendering is very easy to incorporate naturally.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by dahart on Friday March 22, 2019 @11:31AM
(#19463511)
This is a good point I hadn’t thought of that much. Ray tracing is more easily able to get to ‘stereo correctness’ than all the screen space effects and other great tricks that have worked so well for games.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by mattnewport on Friday March 22, 2019 @04:03PM
(#19466352)
Yeah, that's what I meant by foveated rendering. You can spend your samples where they are most valuable based on where the user is looking among other factors.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by nickjj on Friday March 22, 2019 @08:43AM
(#19461987)
Now that you mention it, I don't remember if it was opengl or glide, it was over 20 years ago. Same effect tho.
I just remember seeing all of the ambient lights and glows and thinking how amazing it looked. Specifically some early campaign map where you're going through dark sewers that had a bunch of little lights that emit a glow.
But after the coolness factor wore off, it was back to using the most minimal settings possible to maximize visibility and frame rates to play it online.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by narrator on Friday March 22, 2019 @06:19AM
(#19461071)
This is great to see. Quake and Doom were all about elaborate fake 3d and elaborate fake raytracing to run fast and look amazing on slow hardware. As technology improved, first we got a real 3d engine and now we finally have a real raytracing engine.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by dexen on Friday March 22, 2019 @06:46AM
(#19461209)
>Quake and Doom were all about elaborate fake 3d
A nitpick: DooM (1 and 2), just as well as Duke Nukem 3D were indeed "2.5D" elaborate fakery of 3D. One of examples of the ruse: a level was basically a (floor, ceiling) height map, and there could be no two overlapping rooms one above the other.
On the other hand, Quake (1) was an early pioneer [1] of real, actual 3D, including an OpenGL backend and all that. That's one of the reasons it required significantly beefier hardware: needing a Pentium for smooth gameplay, while DooM would run perfectly fine on a mid-end 486, which is a generation older.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by taneq on Friday March 22, 2019 @08:14AM
(#19461762)
> On the other hand, Quake (1) was an early pioneer [1] of real, actual 3D
The Quake rasterizer with its overlapped divide for perspective correction is a thing of beauty and possibly my favourite piece of code ever. If there's anyone out there who loves optimisation and hasn't read Abrash's "black book", it's well worth a read.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by int_19h on Friday March 22, 2019 @11:09PM
(#19468822)
One interesting thing about Quake is that not only it was 3D, but it was excessively 3D in many ways. For example, they have rendered all flames as 3D models, even though sprites and/or procedurally generated 2D flame (as used in e.g. Unreal two years later) would look much better given the very low poly counts.
Curiously, explosions were still sprite + particles. But I can't remember anything else outside of UI that was using a sprite.
Q2 took it even further - it has 3D models for explosions, and even puffs of smoke when bullets hit walls (these were simple particle effects in Q1). IIRC the only thing that was a sprite was the BFG10K plasma ball?
Back then, I just found it strange. In retrospect, I wonder if it was an attempt to associate some kind of "uncompromising real 3D" branding with id engines. It's interesting that Q3 - which was the first engine id released after they got serious competitors in that space (Unreal, Source) - switched back to sprites for fire, smoke and explosions. And Unreal especially made it a point that it wasn't just 3D, but it was shiny:
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by fb03 on Friday March 22, 2019 @09:02AM
(#19462109)
Yes, but I remember you still had to use a really contrived way of explaining that 3d 'geometry' on the editor (BUILD.exe).
Basically you still drew in 2d but you could overlap rooms with other lines that wouldn't intersect with any already existing lines, and that would configure 'a room above/below the current room'. Then you had to slope the floor until it actually connected with the newer room.
It was pretty strange but yeah, some people built insanely detailed things with Duke3D :-)
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by TomBombadildoze on Friday March 22, 2019 @11:17AM
(#19463352)
> Basically you still drew in 2d but you could overlap rooms with other lines that wouldn't intersect with any already existing lines, and that would configure 'a room above/below the current room'.
Elaborating a bit -- the Build engine had a feature called "sector effectors" that, when triggered, would teleport the player to a completely different sector in the map. The transition was seamless and permitted interesting effects like the illusion of having stacked floors.
The designers used this feature to most profound effect in the level Lunatic Fringe. In order to complete a full circuit of the central ring room, the player had to move through a 720-degree circle to return to the entrance. It was _extremely_ confusing playing that level for the first time.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by estebank on Friday March 22, 2019 @02:20PM
(#19465350)
Interestingly enough the Portal games leverage similar level design given to the Source engine, not only for the obvious user controlled portals but also to stitch levels together seamlessly, including impossible architecture (the long bridge leading to the glados confrontation in the first Portal shows the room you're about to enter, but its actually too small and shaped differently to hold the room.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by mbel on Friday March 22, 2019 @06:39AM
(#19461167)
What do you mean "fake 3d"? They are as 3D as any other computer generated images with linear perspective. Quake is even using a rasterizer like nearly all games today.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by anc84 on Friday March 22, 2019 @06:59AM
(#19461288)
I'd take the benefit of the doubt and consider the poster oblivious to the vast difference between Doom and Quake, they probably just threw them both into the "early 90s 2.5D FPS" bucket.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by dahart on Friday March 22, 2019 @11:37AM
(#19463574)
The word fake doesn’t bother me, but maybe “limited 3d” would be a better term for it. The 3d it had was still correct 3d, sure, it was just limited in what kinds of 3d it could render, unlike the full 3d games that came soon after.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by PavlikPaja on Friday March 22, 2019 @11:54AM
(#19463747)
It wasn't really 3D, you couldn't look up or down at all in the original doom I think and in the later games you could, but it got all horribly distorted, as the engine couldn't actually show the scene from different perspective.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by morganvachon on Friday March 22, 2019 @07:49AM
(#19461616)
The terms "fake 3D" and "2.5D" in reference to Doom and similar games has nothing to do with sprite based mobs, it's about not having a truly 3D map. Doom's maps were drawn in 2D top-down with a height variable for any wall or platform. You couldn't have one room above another, which is why elevators in the game were solid (you couldn't stand under the floor). The various level editors for Doom based games looked like primitive 2D CAD programs.
Quake was a whole new paradigm, it was based on a true 3D engine and its maps were generated in three dimensions. You could stand under stairs, under the room above, and underneath lifts.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by leoc on Friday March 22, 2019 @08:07AM
(#19461720)
It's surely both the sprite-based monsters and the "2.5D" world that justify DOOM's "2.5D/fake 3D" label, though indeed more the latter. (System Shock was a transitional example of sprite monsters in an otherwise full-3D world: https://youtu.be/CGKidgwcalM?list=PLqqLcEJ9bUtNedMdW64WioyV9... )
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by jandrese on Friday March 22, 2019 @10:57AM
(#19463104)
Funnily enough the sprite based enemies were a real strength for Doom compared to many of the fully 3D games that came out in the next generation, including Quake. Because rendering full 3D enemies was taxing for the hardware you couldn't put too many of them on the screen at once. In some games more than 2 or 3 would cause it to chug. So you only ever run across one or two enemies at once in the games, unlike Doom that wasn't afraid to throw a swarm of pinkies at you because you just picked up the chainsaw.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by kkapelon on Friday March 22, 2019 @12:33PM
(#19464192)
Agreed. I think "Painkiller" is one of the few games that actually managed (much later) to put a healthy amount of enemies against you just like Doom did..
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by sneakernets on Friday March 22, 2019 @04:52PM
(#19466817)
Of course it is in the "game" sense. It handles X, Y, and Z axes in game on mobs and the player, although it is selective in which mobs get the "Z treatment". Monsters are infinitely tall, projectiles aren't. It's not a limitation of the engine as much as it was a design choice, as Y-shearing was too ugly in Carmack's opinion, so it was removed in favor of a very forgiving auto-aim.
Nothing's stopping someone from adding code to render 3D models or "portals" in the game, and in fact it has already been done, with no 3D acceleration needed.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by mstade on Friday March 22, 2019 @07:46AM
(#19461600)
I hope raytracing will enable some remasters of amazing old games. No need for new content, changing the stories or gameplay, just vastly improved graphics. I always preferred the Quake series for multiplayer, but Half-Life was great single player. Max Payne would be a great replay with better graphics. Some old flight sims like Jane's WWII Fighters, X-Wing v Tie Fighter, Wing Commander... I'd pay cash monies for this.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by biosed on Friday March 22, 2019 @08:12AM
(#19461754)
"Glass, which reflects everything around it" except the character standing in front of it! It seems like it is over done but not done properly. I know it is a demo but still, its trying so hard!
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by qwerty456127 on Friday March 22, 2019 @04:50PM
(#19466799)
> id Software’s Quake II launched in 1997, bringing gamers a new single-player campaign, a long-awaited, addictive multiplayer mode that we played for years on pitifully-slow 56K modems, and a jaw-dropping engine
As for me Quake 2 was kind of a disappointment after Duke Nukem 3D. Only Half-Life brought back the depth Duke Nukem 3D had. E.g. seeing something like a ventilation cover and not being able to break it and climb through felt infuriating.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by scruffyherder on Friday March 22, 2019 @05:35PM
(#19467205)
Honestly Quake 2's biggest feature was going open source.
When I was porting Quake 2 to MS-DOS, I have to admit that it's the most I ever played of it. It really fell into Carmak's view that stories have no place in gaming.
It's a shame Valve found a much bigger market than games, but it leaves the mantle for others to pick up.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by qwerty456127 on Friday March 22, 2019 @10:08PM
(#19468616)
> stories have no place in gaming
What does this mean? Being told and participating in a story has always been by far the primary thing I play a game for. Interactive visual fiction experience inducing compassion and involvement bundled with moderate challenge, a degree of freedom and realism (that's why I don't like rail-nailed heavily scripted games) is what I want of a game. The visual part should be reasonable (mostly needed for the atmosphere) and controls should be convenient. In my opinion Half-Life and Fallout (all the parts) were the best games I ever played. The story unveiling and the sense of helping people in the imaginary world heroically (something that is a way too hard and dangerous for an average Joe to do in the real life where you can't save&load) and exploration are the things that make a game addictive for me.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by furicane on Friday March 22, 2019 @05:42PM
(#19467260)
Quake 2 is one of the most difficult FPS games to play competitively. I played the game for 10 years, 1998 - 2008. I can tell you're looking at the game from a different perspective (I'm assuming you're referring to its singleplayer), however - its multiplayer component was nothing short of amazing. Game actually takes a huge physical toll on the player due to complex controls (strafe jumps, circle jumps, doublejumps, circle-strafes, occasional rocket / grenade jump), and the movement aspect combined with aim and general awareness made it one of the best games I had honor to play.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by scruffyherder on Saturday March 23, 2019 @02:11AM
(#19469279)
Part of the reason I started the DOS port was that the QuakeWorld port had dropped to zero activity. I was trying to validate a different style of building GCC and all the servers were empty.
When q2 had shipped out I was so busy working I never had time to play it seriously.
Quake 4 felt far more engaging to me. And q3.. I had the tin box set for Linux. Remember that push to make retail Linux gaming a thing? Shame it never panned out.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by scruffyherder on Saturday March 23, 2019 @02:01AM
(#19469250)
I didn't mean to imply that, just that the only reason q2 gets as much love these days is that it's source is available.
And iD did a great job of writing modular and portable code.
It was really exhilarating to get it running on a different platform with essentially no real changes, other than platform code and initially removing the DLL support.
Thankfully DJGPP had progressed far enough that its DLL support works great.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by int_19h on Saturday March 23, 2019 @03:03AM
(#19469389)
I remember there was a DOS extender that could run Win32 console and very basic (full-screen window) GUI binaries. Just enough to run Quake 2 in software mode.
when the author disappeared from the face of the earth I uploaded everything I had regarding it. It's an incredible extender, sure, but it's nothing like having a native port.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by arianvanp on Friday March 22, 2019 @07:43AM
(#19461584)
No I think they are one and the same. q2vpkt is built on top of VK_NV_ray_tracing which is the Vulkan interface to RTX. It won't run on non-nvidia hardware afaik
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by Strom on Friday March 22, 2019 @10:55AM
(#19463088)
They're not the same.
“But what’s new with Quake II RTX compared to Q2VKPT?”, you ask. A lot. We’ve introduced real-time, controllable time of day lighting, with accurate sunlight and indirect illumination; refraction on water and glass; emissive, reflective and transparent surfaces; normal and roughness maps for added surface detail; particle and laser effects for weapons; procedural environment maps featuring mountains, sky and clouds, which are updated when the time of day is changed; a flare gun for illuminating dark corners where enemies lurk; an improved denoiser; SLI support (hands-up if you rolled with Voodoo 2 SLI back in the day); Quake 2 XP high-detail weapons, models and textures; optional NVIDIA Flow fire, smoke and particle effects, and much more!
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by steinuil on Friday March 22, 2019 @07:32AM
(#19461522)
I hope they're going to release it later, after cleaning it up. Quake 2 is GPL'd, so I think they're compelled to, and it would also be a good example of how to use the VKRay API and what it looks like in an actual game.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by Strom on Friday March 22, 2019 @10:59AM
(#19463128)
It would be nice if they would release it. However GPL doesn't require them to do so. [1] They only need to give the source to the people whom they also give the binaries.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by iofiiiiiiiii on Friday March 22, 2019 @06:37AM
(#19461155)
This looks like RTX versus Quake2 software renderer, so the pictures are somewhat deceptive as they do not use the more powerful original Quake2 renderers.
I would be interested how RTX compares to the other Quake2 renderers that it originally came with.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by hellofunk on Friday March 22, 2019 @07:57AM
(#19461670)
Is this ray tracing or path tracing? I'd think that real-time path tracing would still be hard/impossible in real-time considering the number of samples, but I'm not sure. People throw around these terms interchangeably which complicates the discussion, though the algorithms have notable departures from each other.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by crote on Friday March 22, 2019 @08:07AM
(#19461727)
0:36 in the video, "all based on path tracing". Easy tell: the soft shadows, volumetric lighting, indirect lighting, complex shaders. Some of it could probably be faked, but it's trivial with path tracing.
About speed: it's still very hard to do real-time, but it seems like denoising algorithms are getting good enough that it's getting doable. Keep in mind that it is a game, so small graphical glitches aren't that big of a deal.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by dahart on Friday March 22, 2019 @11:46AM
(#19463678)
Depends on who you ask, the term is overloaded now.
These days, it does tend to mean doing global illumination using ray tracing.
Originally, the term “path tracing” was used to refer to taking a single random scatter at every step along a path of connected segments, as opposed to the idea of taking multiple random scatters at a point and averaging them, recursively. It’s a way of thinking of Monte Carlo rendering as taking one sample in a very high dimensional space - where a chain of ray segments, or “path” is a single sample - rather than thinking of each ray segment separately as a sample.
Ray tracing, FWIW, can sometimes refer to situations where you’re not even rendering. It has a more general meaning of doing line based visibility queries, which you can use for lots of things.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by hellofunk on Friday March 22, 2019 @12:14PM
(#19463978)
If I’m not mistaken, for your last paragraph, general visibility tests for lines that does not otherwise involve actual rendering is typically just called ray casting.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by dahart on Friday March 22, 2019 @12:18PM
(#19464024)
You’re not mistaken, ray casting would be more common, but ray tracing is also used. This is especially true among people that design path tracing renderers where we consider “ray tracing” to be a visibility primitive. “Trace a ray” and “cast a ray” are synonymous. I also think using “ray tracing” for visibility might start become more popular now with RTX hardware since the “ray tracing” hardware only provides the visibility test, not a renderer.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by kuzehanka on Friday March 22, 2019 @01:00PM
(#19464449)
In the realtime graphics world,
Ray tracing = initiate rays from light sources, bounce them around, accumulate them on camera. This is accurate but incredibly inefficient. This is how pre-baked light mapping and GI works.
Path tracing = initiate rays from camera, induce bounce rays toward light sources. Not quite as accurate but orders of magnitude mode efficient in terms of producing an acceptable image.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by hellofunk on Friday March 22, 2019 @01:51PM
(#19464999)
This is confusing and not true. The RTX is specifically referred to as "ray tracing" but no one does forward ray tracing which is what you are referring to. Both general Ray Tracing and Path Tracing involve "backwards ray tracing", starting from the camera. The distinction is not where the ray originates, its the algorithm for generating and following those rays.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by woodrowbarlow on Friday March 22, 2019 @12:04PM
(#19463871)
can someone help me understand what "ray tracing" means in this case?
i've read a few technical articles about ray-tracing, but they mostly describe it as a rudimentary (largely outdated) way of achieving 3d effects with relatively little code, and with severe limitations (walls must be orthonormal, changes in elevation require extra work, etc.). i understand ray-tracing at this level (break the view into columns, set the fill height of the column according to the distance of the ray).
then i see marketing-style articles like this one that use the same term to describe advanced lighting effects, material reflections, etc. and i don't understand the technological jump. what am i missing?
edit: i was thinking of "ray casting", not "ray tracing". thank you for the corrections below.
And then the new hotness for offline rendering is Path Tracing, which is a form really good but really hard to accelerate form of ray tracing: https://en.wikipedia.org/wiki/Path_tracing
And yes fundamentally all of these are "shoot rays out from the camera", hence the very specific terminology used for each to disambiguate which approach to shooting out rays from the camera is being used and what happens when rays hit a thing.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by xsmasher on Friday March 22, 2019 @12:16PM
(#19464008)
The technique you are talking about, used for Wolfenstein 3D in the '92, is more commonly called "ray-casting." You cast one ray per screen X (or fewer) and see what object it hits, and then draw a slice of that object.
https://en.wikipedia.org/wiki/Ray_casting
Ray tracing as used here means simulating light rays bouncing off of objects - it's a high fidelity technique generally not used in games in the past, because it is so slow.
https://en.wikipedia.org/wiki/Ray_tracing_(graphics)
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by tntn on Friday March 22, 2019 @12:14PM
(#19463973)
Sounds like the first thing you are describing is closer to ray casting. Ray tracing doesn't have the limitations you mention.
Roughly speaking, ray tra in techniques are variations on the concept of tracing a ray from the camera back into the screen and seeing where is ends up. The different variations distinguish themselves by what happens at a ray intersection. Classical ray tracing will spawn a shadow ray towards light source. Path tracing will stochastically sample some distribution of ray directions (usually based on a combination of light locations and material properties) in order to do Monte Carlo integration of the rendering equation. There are other variations.
Ray tracing (w/ only shadow rays) doesn't give you global illumination. Path tracing (this work) does.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by yedpodtrzitko on Friday March 22, 2019 @09:20AM
(#19462236)
That looks really impressive from both technical and also marketing point of view. Especially the latter one keeps nVidia ahead of AMD. As much as I like AMD, they need to step up their game somehow.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by Freak_NL on Friday March 22, 2019 @04:39PM
(#19466678)
Buy the game on Steam or gog.com, and use the assets with any client you like (on practically any operating system) such as: https://yamagi.org/quake2/
Of course that doesn't get you this ray tracing thingy, although you might be able to run that when they release it and if your hardware supports it.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by Strom on Friday March 22, 2019 @10:50AM
(#19463033)
That's the source for Q2VKPT. I wonder if the source for Quake II RTX will also be released, which is the main target of discussion in this nVidia article and builds upon Q2VKPT.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by lanevorockz on Friday March 22, 2019 @07:50AM
(#19461622)
RTX is based on the Turing architecture that is a pretty amazing beast. The technology of raytracing has been around or a long time through iray what nvidia did is to bake in the necessary formats, neat interface and slight hardware adjustments.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by leowoo91 on Friday March 22, 2019 @08:41AM
(#19461977)
I only worry about the number of cores being used in these demos. Tech might be same but it's quite possible Nvidia could use their high-energy prototypes to enhance the results. There is no restrictions on that. Clear statements like, "we are using the exact same RTX card we are shipping to consumer in September" would really be a selling point for me.
Re:Quake II RTX: Re-Engineering a Classic with Ray Tracing E...
by tntn on Friday March 22, 2019 @12:26PM
(#19464117)
I think Titan RTX is a "perfect die," so to speak, so even if they used the maximum number of cores they possibly could for this demo, that same silicon is for sale.
This is not just RTT; there's a big amount of rework. Likely, any old game would look significantly better with such development effort (in other words, with any good remastering).
This could be considered a great market stunt - the graphical improvement is touted to be due to RTX (ray tracing), while it's actually due to many factors.
On top of that, it misleads people into thinking that this type of improvement is typical of ray tracing, and that it comes at virtually no cost, while currently, ray tracing takes a big performance hit, and it's generally hard to notice.
Q2VKPT is close to the concept "improved with ray tracing", and while certainly impressive, it doesn't yield the same "AMAZING!" effect.
[1] just look at Doom 2016: https://cdn.arstechnica.net/wp-content/uploads/2016/05/20160...
If they hadn't done the hard work of basically retexturing every single surface, it wouldn't look half as good. Without depth, ray-tracing looks incredibly flat, like this: http://builder.openhmd.net/blender-hmd-viewport-temp/_images...
To add to this point, at 1:35 in the video they compare with / without volumetric ligthing except, well, volumetric lighting has been used in games for a while now.
The "before" should show a non-RTX lighting instead of just nothing at all.
Also, Qualcomm’s popular Adreno line on Android GPUs has its roots in the Xbox360 GPU.
I think the MMX era was the start of Intel's tradition of hyped up graphics related press releases followed by a total lack of execution.
All comes down to Microsoft and Intel coming up with a concept of purely software peripherals around 1997. Intel released things like MMX, AC'97, Communications and Networking Riser (CNR), and audio/modem riser (AMR) standards, all in an effort to push hardware vendors out of the market by handling those roles in software by the CPU. More work for CPU = more demand for fast CPUs = more profit.
Funnily enough AMDs 1998 3DNow! did actually add floating point support to MMX and was useful for 3D acceleration until hardware T&L came along 2 years later.
Intel Paid few dev houses to release make believe MMX enhancements, like POD (1997)
https://www.mobygames.com/images/covers/l/51358-pod-windows-...
1/6 of box covered with Intel MMX advertising while game used it only for some sound effects. Intel repeated this trick in 99 while introducing Pentium 3 with SSE. Intel commissioned Rage Software to build a demo piece showcasing P3 during Comdex Fall. It worked .. by cheating with graphic details ;-) Quoting hardware.fr "But looking closely at the demo, we notice - as you can see on the screenshots - that the SSE version is less detailed than the non-SSE version (see the ground). Intel would you try to roll the journalists in the flour?". Of course Anandtech used this never released publicly cheating demo pretending to be a game in all of their Pentium 3 tests for over a year.
https://www.vogons.org/viewtopic.php?f=46&t=65247&start=20#p...
I'll never forgive the computer store guy when I was 14 who pushed me to buy the $40 cheaper S3 Trio3D instead of the Voodoo. Instead of something useful, I ended up with a glorified paperweight that only worked well for Direct3D. Guess how many games back then bothered to use that?
I think I got Quake 1 with some shitty hacked MiniGL driver working _once_.
All my school friends had 3dfx cards. Didn’t get to do 3D gaming until I bought a Radeon 8500 many years later!
Still have my 3dx actually...it was a very interesting card:
https://en.wikipedia.org/wiki/PowerVR#Series1_(NEC)
https://videocardz.net/videologic-apocalypse-3dx-4mb/
Most obvious to me in the quake logo/skull on the left of this[1] image.
1. https://images.nvidia.com/geforce-com/international/comparis...
https://www.youtube.com/watch?v=0uurJ-zjhok
The only downside that can be pointed out is that you are hardware dependent. Would be amazing to see thing in a console, all games with dynamic lighting would help developer and gamers.
In the linked demo video they also use new high resolution textures. Which include not only color data as in the original Quake, but also normal maps and maps with PBR parameters (metalness, roughness).
That said… gimme gimme gimme Half Life 1, plssssssss :D !
> they added PBR layers
and fluid simulation for explosions
I'd rolling in joy for Max Payne and GTA San Andreas :)
It feels more like a reboot than a remaster
I agree with you that there is asset work to be done, but I bet there are tools out there that can simplify and automate this process quite a bit today.
https://www.resetera.com/threads/ai-neural-networks-being-us...
https://topazlabs.com/ai-gigapixel/
https://captrobau.blogspot.com/2019/03/remastering-star-trek...
Adding things like health regen, cover, alternate fire modes, and so on ultimately just distracts from the action in my opinion. We don't really have any more games like Quake nowadays.
Your lighting point is reasonable in the sense that this demo was made to demonstrate the dramatic lighting without respect to gameplay. On the other hand games are already clearly going toward HDR and physical and dramatic lighting. If Quake had HDR lighting, it would look just as good but it would be less distracting because it would have been directed and designed to support the gameplay.
This version also has dynamic adaptation which would have been awesome to have back in the day - some of the dark areas are too dark and it’s great to have the lighting automatically adjust so that at least I can see.
this is not to diminish artists working today. (I'm one of them!)
Adrian Carmack though, comes from a whole other breed of creators who had to be both artistically brilliant as well as technically resourceful enough to create art within EXTREMELY tight constraints.
the menagerie for doom, which he is responsible for are still a masterwork in readability, efficiency of design, and communication of purpose in many ways (the textures in that game very easily still hold up today)
I work with a ton of amazingly talented artist, and still, it's rare that I see both artistic, illustrative, and technical talent all in one person. (helps that teams are enormous and so those skills can be spread amongst multiple people)
Anthem has some buildings that have an older feel out in the freeplay areas, but even that would be a stretch.
Instead of "wow" you get "well, duh, that's how things should look".
Games are handling this by dialling the amplitude of RTX effects way down and having a smoothing pass. After all that is done, the wow effect is gone and you're just left with a more dynamic version of the same or worse aesthetics that we're already used to.
I expect it'll truly take off on next gen hardware, whenever that rolls out.
Here's what RTX+DLDN actually looks like if not dialled down and smoothed: https://youtu.be/CuoER1DwYLY?t=553
My takeaway is yes that quake 2 demo looks really cool, but you just know that they used every black magic hack in the book to get there, and most of it can't be replicated in a modern high fidelity game. It's definitely not a case of flicking an 'RTX on' switch.
https://www.youtube.com/watch?v=YjjTPV2pXY0
If you thought the official 3DS one was pretty, wait until you see the fan work done on a UE4 version:
https://youtu.be/OrMRjK_5RRU?t=113
Until you ask them whether a scene is a photo or a render. They won't know to look for shadow acne, but they will still make a judgement that includes it. RTX has a few things that we've had for years, but it seems to do a way better job at energy preservation.
I wonder if in the end (should we eventually see universal adoption) raytracing will prove more of a boon towards developers rather than end users, as it has been with many other hardware advancements.
That's the key thing though, RTX removes the need for all those tricks (which are tricky to get right, humans are good at spotting lighting flaws in a scene) which is a net win for the game developers who can focus that time/effort elsewhere.
It reminds me of what it was like to first see 3dfx OpenGL mode in Quake II when I got a Voodoo graphics card.
Other things like more accurate reflections and specular effects add more to VR where subtle head movements that don't produce the correct response our brain expects impact immersion even when we're not able to consciously identify why the rendering is not quite right.
The additional performance demands of VR mean it will be a while before we really see these benefits realized but I think when it all comes together it will really improve immersion.
There are some other potential benefits to basing VR rendering around ray tracing too that might take even longer to realize. For example you can directly compensate for the optics of the lenses when generating rays and avoid the whole post process warping step and foveated rendering is very easy to incorporate naturally.
I just remember seeing all of the ambient lights and glows and thinking how amazing it looked. Specifically some early campaign map where you're going through dark sewers that had a bunch of little lights that emit a glow.
But after the coolness factor wore off, it was back to using the most minimal settings possible to maximize visibility and frame rates to play it online.
But yeah, the biggest improvement was putting it into Glide/OpenGL and watching all the new lights appear.
http://dk.toastednet.org/Q2DOS/
No Glide though, so it won't run under emulation it needs an actual 3dFX card.
A nitpick: DooM (1 and 2), just as well as Duke Nukem 3D were indeed "2.5D" elaborate fakery of 3D. One of examples of the ruse: a level was basically a (floor, ceiling) height map, and there could be no two overlapping rooms one above the other.
On the other hand, Quake (1) was an early pioneer [1] of real, actual 3D, including an OpenGL backend and all that. That's one of the reasons it required significantly beefier hardware: needing a Pentium for smooth gameplay, while DooM would run perfectly fine on a mid-end 486, which is a generation older.
[1] cf. Marathon
The Quake rasterizer with its overlapped divide for perspective correction is a thing of beauty and possibly my favourite piece of code ever. If there's anyone out there who loves optimisation and hasn't read Abrash's "black book", it's well worth a read.
https://media.moddb.com/images/members/1/240/239733/qv1.gif
Curiously, explosions were still sprite + particles. But I can't remember anything else outside of UI that was using a sprite.
Q2 took it even further - it has 3D models for explosions, and even puffs of smoke when bullets hit walls (these were simple particle effects in Q1). IIRC the only thing that was a sprite was the BFG10K plasma ball?
Back then, I just found it strange. In retrospect, I wonder if it was an attempt to associate some kind of "uncompromising real 3D" branding with id engines. It's interesting that Q3 - which was the first engine id released after they got serious competitors in that space (Unreal, Source) - switched back to sprites for fire, smoke and explosions. And Unreal especially made it a point that it wasn't just 3D, but it was shiny:
https://www.youtube.com/watch?v=zqdeyseQAP4
Double nitpick: Duke Nukem could actually have stacked floors and bridges over other playable areas.
As such, if it didn’t use “real” 3D, its 2.5D scheme were considerately more elaborate than Doom or Wolfenstein.
Basically you still drew in 2d but you could overlap rooms with other lines that wouldn't intersect with any already existing lines, and that would configure 'a room above/below the current room'. Then you had to slope the floor until it actually connected with the newer room.
It was pretty strange but yeah, some people built insanely detailed things with Duke3D :-)
Elaborating a bit -- the Build engine had a feature called "sector effectors" that, when triggered, would teleport the player to a completely different sector in the map. The transition was seamless and permitted interesting effects like the illusion of having stacked floors.
The designers used this feature to most profound effect in the level Lunatic Fringe. In order to complete a full circuit of the central ring room, the player had to move through a 720-degree circle to return to the entrance. It was _extremely_ confusing playing that level for the first time.
https://dukenukem.fandom.com/wiki/Lunatic_Fringe
Fabian Sanglard wrote an excellent series about the engine here: https://fabiensanglard.net/duke3d/
Quake was a whole new paradigm, it was based on a true 3D engine and its maps were generated in three dimensions. You could stand under stairs, under the room above, and underneath lifts.
Grass and particle effects are secondary....
How many FPS AAA titles today use sprites for enemies and weapons?
Nothing's stopping someone from adding code to render 3D models or "portals" in the game, and in fact it has already been done, with no 3D acceleration needed.
If you look at the water reflections, you will however see your gun model and a disembodied/floating hand holding it.
Somehow... it almost works....
As for me Quake 2 was kind of a disappointment after Duke Nukem 3D. Only Half-Life brought back the depth Duke Nukem 3D had. E.g. seeing something like a ventilation cover and not being able to break it and climb through felt infuriating.
When I was porting Quake 2 to MS-DOS, I have to admit that it's the most I ever played of it. It really fell into Carmak's view that stories have no place in gaming.
It's a shame Valve found a much bigger market than games, but it leaves the mantle for others to pick up.
What does this mean? Being told and participating in a story has always been by far the primary thing I play a game for. Interactive visual fiction experience inducing compassion and involvement bundled with moderate challenge, a degree of freedom and realism (that's why I don't like rail-nailed heavily scripted games) is what I want of a game. The visual part should be reasonable (mostly needed for the atmosphere) and controls should be convenient. In my opinion Half-Life and Fallout (all the parts) were the best games I ever played. The story unveiling and the sense of helping people in the imaginary world heroically (something that is a way too hard and dangerous for an average Joe to do in the real life where you can't save&load) and exploration are the things that make a game addictive for me.
> Story in a game is like a story in a porn movie. It's expected to be there, but it's not that important.
It's why DooM was such an incredible novelty of fast paced 3d shooter, and Quake... Well.. Its devoid of character.
It's why HL & Fallout are so beloved.
I'm 100% with you
When q2 had shipped out I was so busy working I never had time to play it seriously.
Quake 4 felt far more engaging to me. And q3.. I had the tin box set for Linux. Remember that push to make retail Linux gaming a thing? Shame it never panned out.
And iD did a great job of writing modular and portable code.
It was really exhilarating to get it running on a different platform with essentially no real changes, other than platform code and initially removing the DLL support.
Thankfully DJGPP had progressed far enough that its DLL support works great.
https://sourceforge.net/projects/hx-dos/
when the author disappeared from the face of the earth I uploaded everything I had regarding it. It's an incredible extender, sure, but it's nothing like having a native port.
Seems a strange omission.
> As Christoph states on his site [1] ...
[1] http://brechpunkt.de/q2vkpt [2] https://github.com/cschied/q2vkpt
“But what’s new with Quake II RTX compared to Q2VKPT?”, you ask. A lot. We’ve introduced real-time, controllable time of day lighting, with accurate sunlight and indirect illumination; refraction on water and glass; emissive, reflective and transparent surfaces; normal and roughness maps for added surface detail; particle and laser effects for weapons; procedural environment maps featuring mountains, sky and clouds, which are updated when the time of day is changed; a flare gun for illuminating dark corners where enemies lurk; an improved denoiser; SLI support (hands-up if you rolled with Voodoo 2 SLI back in the day); Quake 2 XP high-detail weapons, models and textures; optional NVIDIA Flow fire, smoke and particle effects, and much more!
--
[1] http://www.gnu.org/licenses/gpl-faq.html#GPLRequireSourcePos...
I would be interested how RTX compares to the other Quake2 renderers that it originally came with.
About speed: it's still very hard to do real-time, but it seems like denoising algorithms are getting good enough that it's getting doable. Keep in mind that it is a game, so small graphical glitches aren't that big of a deal.
These days, it does tend to mean doing global illumination using ray tracing.
Originally, the term “path tracing” was used to refer to taking a single random scatter at every step along a path of connected segments, as opposed to the idea of taking multiple random scatters at a point and averaging them, recursively. It’s a way of thinking of Monte Carlo rendering as taking one sample in a very high dimensional space - where a chain of ray segments, or “path” is a single sample - rather than thinking of each ray segment separately as a sample.
Ray tracing, FWIW, can sometimes refer to situations where you’re not even rendering. It has a more general meaning of doing line based visibility queries, which you can use for lots of things.
Ray tracing = initiate rays from light sources, bounce them around, accumulate them on camera. This is accurate but incredibly inefficient. This is how pre-baked light mapping and GI works.
Path tracing = initiate rays from camera, induce bounce rays toward light sources. Not quite as accurate but orders of magnitude mode efficient in terms of producing an acceptable image.
i've read a few technical articles about ray-tracing, but they mostly describe it as a rudimentary (largely outdated) way of achieving 3d effects with relatively little code, and with severe limitations (walls must be orthonormal, changes in elevation require extra work, etc.). i understand ray-tracing at this level (break the view into columns, set the fill height of the column according to the distance of the ray).
then i see marketing-style articles like this one that use the same term to describe advanced lighting effects, material reflections, etc. and i don't understand the technological jump. what am i missing?
edit: i was thinking of "ray casting", not "ray tracing". thank you for the corrections below.
Ray casting is the old Wolfenstein 3D look: https://en.wikipedia.org/wiki/Ray_casting
Ray tracing is what Pixar uses for Toy Story, Monsters Inc, etc... https://en.wikipedia.org/wiki/Ray_tracing_(graphics)
And then the new hotness for offline rendering is Path Tracing, which is a form really good but really hard to accelerate form of ray tracing: https://en.wikipedia.org/wiki/Path_tracing
And yes fundamentally all of these are "shoot rays out from the camera", hence the very specific terminology used for each to disambiguate which approach to shooting out rays from the camera is being used and what happens when rays hit a thing.
Ray tracing as used here means simulating light rays bouncing off of objects - it's a high fidelity technique generally not used in games in the past, because it is so slow. https://en.wikipedia.org/wiki/Ray_tracing_(graphics)
Roughly speaking, ray tra in techniques are variations on the concept of tracing a ray from the camera back into the screen and seeing where is ends up. The different variations distinguish themselves by what happens at a ray intersection. Classical ray tracing will spawn a shadow ray towards light source. Path tracing will stochastically sample some distribution of ray directions (usually based on a combination of light locations and material properties) in order to do Monte Carlo integration of the rendering equation. There are other variations.
Ray tracing (w/ only shadow rays) doesn't give you global illumination. Path tracing (this work) does.
Of course that doesn't get you this ray tracing thingy, although you might be able to run that when they release it and if your hardware supports it.