News for hackers. Stuff that matters.
Re:We taught robots to carve marble sculptures by ewiesler on Wednesday November 18, 2026 @12:18PM (#50549053)
We taught KUKA KR240 robots to carve carve marble sculptures end to end with autonomous toolpathing and simulation, starting with the Stanford bunny as a test case. Here’s how it goes from 3D model to finished sculpture using voxel representations and geodesic path planning.
Re:We taught robots to carve marble sculptures by moeffju on Thursday November 19, 2026 @07:43AM (#50559368)
Cool work! Could you maybe say a few sentences about where/how specifically this improves on the current state of the art? I was under the impression that whole monasteries in Italy are running fleets of CNC robots to create marble sculptures - is your process easier to set up, does it go further, does the old process need human finishing etc.? Thank you!
Re:We taught robots to carve marble sculptures by le-mark on Thursday November 19, 2026 @07:49AM (#50559424)
> We taught

What does this mean exactly? Is the robot not being fed gcode?

Re:We taught robots to carve marble sculptures by Joel_Mckay on Thursday November 19, 2026 @09:57AM (#50560959)
Multi-access robotics is NP-hard, and only a closed-loop soft-real-time path correction is feasible. It is usually something pre-baked similar to gcode. =3
Re:We taught robots to carve marble sculptures by GrinningFool on Thursday November 19, 2026 @07:55AM (#50559500)
The words in the post look LLM generated. For some portion of us, that's offputting.

Aside from that, this stood out:

> our mission is to continue to work with artists and designers to decide on the final desired sculpture, and hand carvers to finalize the surface quality of many of our pieces.

This sounds good on the surface (hah) but it seems like it's only valid until the technology allows that work to be replaced too.

Re:We taught robots to carve marble sculptures by voidUpdate on Thursday November 19, 2026 @07:36AM (#50559305)
What part is being "taught"? It looks like a fairly standard CAM pipeline to me...
Re:We taught robots to carve marble sculptures by GrinningFool on Thursday November 19, 2026 @07:50AM (#50559442)
In the before times, we might say we "taught" a system to do something and mean that we designed/implemented the feature.
Re:We taught robots to carve marble sculptures by suddenlybananas on Thursday November 19, 2026 @09:44AM (#50560790)
Did we? "We taught a computer to send emails"? Sounds bizarre to me.
Re:We taught robots to carve marble sculptures by GrinningFool on Thursday November 19, 2026 @02:02PM (#50564617)
Heh. Well, some of us did, anyway.
Re:We taught robots to carve marble sculptures by bazzargh on Thursday November 19, 2026 @06:44PM (#50568214)
I'm not sure if it's the current style, but in the early days of git, commits to git itself and linux often had the subject line of "Teach X about Y". https://github.com/search?q=repo%3Agit%2Fgit+teach+about&typ... - I liked that, and used it elsewhere.
Re:We taught robots to carve marble sculptures by amelius on Thursday November 19, 2026 @08:32AM (#50559868)
Maybe they used an LLM?
Re:We taught robots to carve marble sculptures by Overdrivr on Thursday November 19, 2026 @09:10AM (#50560337)
Honestly for CAM you absolutely need deterministic output (Speaking from experience, I built automated CAD to CAM pipelines in the past using Python+Siemens NX). IMO the true innovation is the algorithm that they must have built that turns a target voxel into a 5+-axis machining toopath, but that's good old fashioned algorithms, and also getting to a 100% automated CAM generation. Achieving 95% automation is easy, 100% is very hard
Re:We taught robots to carve marble sculptures by voidUpdate on Thursday November 19, 2026 @09:29AM (#50560592)
There are a couple of mentions of "machine learning", in the parts about generating the toolpaths and connecting the toolpath segments into a continuous path, but I'm still not sure I'd call it teaching robots
Re:We taught robots to carve marble sculptures by ourmandave on Thursday November 19, 2026 @10:13AM (#50561171)
Are they shaping the stone to a figure, or removing the stone to reveal the figure in the block?
Re:We taught robots to carve marble sculptures by indoordin0saur on Thursday November 19, 2026 @10:56AM (#50561764)
Everyone knows that you'll get more hype and funding interest if you somehow connect your work to AI.
Re:We taught robots to carve marble sculptures by KaiserPro on Thursday November 19, 2026 @12:06PM (#50562803)
Yeah I was about to say the same thing. just looks like normal CAM to me.

Good efficient CAM is hard to do, and looking at how dense those toolpaths are, I don;t think its thats efficient. It also seems to only use one tool. I assume thats because anything bigger will cause the arm to deviate toomuch.

Re:We taught robots to carve marble sculptures by MisterTea on Thursday November 19, 2026 @12:34PM (#50563200)
> I assume thats because anything bigger will cause the arm to deviate toomuch.

I've been around a lot of CNC machines, wood routers, metal cutting, plasma/water-jet/laser cutters, laser welding, etc. The key to accurate motion is rigidity and heavy CNC machine tool frames that push a tool into work are hunks of cast iron or steel structures encased in cast epoxy granite. They ride on box ways or heavy linear bearings. They are MASSIVE.

Those robot arms have the rigidity of a wet paper straw by comparison. IMO, this should be a two step process where traditional machines with big tools hog out the rough shape then the robot arms carve the final details.

Re:We taught robots to carve marble sculptures by cloudbonsai on Thursday November 19, 2026 @07:50AM (#50559446)
I recommended seeking the first clip to 00:30. The perspective is somewhat confusing, but the robotic arm in use (KUKA KR240) is actually huge.
Re:We taught robots to carve marble sculptures by pwmglenn on Thursday November 19, 2026 @07:51AM (#50559449)
It's cool, but it kind of diminishes the value. I could imagine a future where marble sculptures are seen as trashy, because of their ubiquity.
Re:We taught robots to carve marble sculptures by LtWorf on Thursday November 19, 2026 @08:06AM (#50559589)
The material itself is not that easy to come by.v
Re:We taught robots to carve marble sculptures by martythemaniak on Thursday November 19, 2026 @08:07AM (#50559603)
Yep, people think they have timeless taste, but mostly it's a reaction to their environment. If you grew up in a works surrounded by endless over the top ornamentation, clean simple lines look fresh, new and appealing. If you grew up in a world of glass boxes, you're desperate for ornamentation.
Re:We taught robots to carve marble sculptures by jackp96 on Thursday November 19, 2026 @08:12AM (#50559645)
Same; it's a fascinating tech exploration, and I enjoyed reading about how it works.

But part of the reason I find carved statues to be impressive and monumental is the technical human feat and the craftsmanship. Looking at them, you can sort of feel the work they must have required.

Mass produced goods aren't inherently bad; but there is something lost in translation for pieces like this, IMO.

Re:We taught robots to carve marble sculptures by fusslo on Thursday November 19, 2026 @08:17AM (#50559716)
Huh, I remember discourse with the CEO (I think) of Monumental on twitter a while ago. There was a frenzy around anti-ai art at the time. If I remember right, he replied to many comments that very skilled human artisans still did the final touches on the sculptures that were cnc carved rough. It really seemed like he was taking that criticism seriously

But now, "... our system turns a 3D model and a block of marble into a finished sculpture, with no human in the loop."

I'm not judging one way or the other. I have 0 skin in this debate. I just find situations like that interesting; like trying to douse a publicity fire while secretly making wildfire

Re:We taught robots to carve marble sculptures by suddenlybananas on Thursday November 19, 2026 @10:10AM (#50561132)
>There was a frenzy around anti-ai art at the time.

There still is. Most people are extremely hostile to AI art. (Albeit I see this case as more like mass-production than AI art per se).

Re:We taught robots to carve marble sculptures by fusslo on Thursday November 19, 2026 @11:42AM (#50562440)
It would be really nice to be able to afford a marble statue. But, really thinking about it I would more than happy with a cast statue, if the casting could have as much detail and crisp edges as marble.

I started looking into modern concretes (for about 5 minutes), and there seems to be a bunch of modern options. I don't know how they compare to marble. I wonder if there is any literature out there giving detail on their properties

But then again, there is an artist who had a bronze sculpture cast in china for crazy cheap. I can't rewatch it now, I think it was under $20k https://www.youtube.com/watch?v=7CtmiWlT6Z4

Re:We taught robots to carve marble sculptures by deadbabe on Thursday November 19, 2026 @08:18AM (#50559720)
Trashy marble sculptures already exist.
Re:We taught robots to carve marble sculptures by amelius on Thursday November 19, 2026 @08:33AM (#50559879)
Maybe, but let's find out.
Re:We taught robots to carve marble sculptures by olalonde on Thursday November 19, 2026 @08:44AM (#50560020)
Re:We taught robots to carve marble sculptures by BeFlatXIII on Thursday November 19, 2026 @09:34AM (#50560649)
[delayed]
Re:We taught robots to carve marble sculptures by suddenlybananas on Thursday November 19, 2026 @09:45AM (#50560797)
But what I've heard from architects is that ornamentation is too expensive for modern buildings because of the cost of labour.
Re:We taught robots to carve marble sculptures by badlibrarian on Thursday November 19, 2026 @10:11AM (#50561148)
A tenet of modernism is that you don't hide the structure. And not necessarily for cost reasons. It can extend to: don't paint it. If you don't like the aesthetics of the material, find a better-looking material.

Ornamentation costs money to transport and install. It can require additional support structures. And it adds additional surface area which complicates maintenance and waterproofing.

Re:We taught robots to carve marble sculptures by BeFlatXIII on Friday November 20, 2026 @10:22AM (#50575967)
[delayed]
Re:We taught robots to carve marble sculptures by TacticalCoder on Thursday November 19, 2026 @12:17PM (#50562938)
> I could imagine a future where marble sculptures are seen as trashy, because of their ubiquity.

And we can see such a past too: they used to be totally fugly, with horrible bright colors. It's by chance that color pigmentation went away after centuries and when they were re-discovered, people found them --at long last-- good looking.

And now we've got beautiful white marbles like the one already posted in this thread and like:

https://en.wikipedia.org/wiki/Psyche_Revived_by_Cupid%27s_Ki... (this one is my favorite of them all)

https://en.wikipedia.org/wiki/The_Kiss_(Rodin_sculpture)

https://en.wikipedia.org/wiki/The_Greek_Slave

https://en.wikipedia.org/wiki/The_Veiled_Virgin

and so many others.

As opposed to the fugly "I'm-a-five-years-old-and-I-puke-colors" colored marbles of old.

We evolve. Music, too, got way better with Mozart, Bach, Beethoven, etc. compared to the music whistled on the off-tune flutes or yore.

Re:We taught robots to carve marble sculptures by sandworm101 on Thursday November 19, 2026 @07:53AM (#50559474)
The profit chain will be how quickly they can replicate a block from a scan of a real block in need of restoration. I have seen countless documentaries on the restoration of old buildings, with the inevitable interviews with stonemasons about how many hours go into each block. The ability to auto-chisel a replica from a scan of an original would radically reduce the cost of restoring old structures.
Re:We taught robots to carve marble sculptures by Arodex on Thursday November 19, 2026 @08:35AM (#50559909)
Redoing the blocks by hand is the whole point. It is experimental archaeology, on top of preserving (and rediscovering lost) old techniques. Your suggestion is useless, counterproductive (where will we find the subject matter experts in old techniques once you kill their jobs?) and ridiculous ("profit chain"... Do you even know how little money there is in restoration?).

>the inevitable interviews with stonemasons about how many hours go into each block

Yeah, it is a point a pride, not a problem to be solved. And they will put their signature on the blocks they sculpted, like their predecessors and the predecessors before them, and someone in a century or a millenium will notice it. That's a form of eternity the tech bros will never attain.

Re:We taught robots to carve marble sculptures by Whitespace on Thursday November 19, 2026 @08:47AM (#50560058)
> Redoing the blocks by hand is the whole point.

I agree. I also think that only 0.1% of existing marble will be redone by hand. The rest will either turn to dust or be replaced by machines.

Re:We taught robots to carve marble sculptures by sandworm101 on Thursday November 19, 2026 @10:41AM (#50561558)
There are many European restoration project awaiting the availability of stonemasons and/or funding. A cheaper/faster way to replicate blocks would allow restorations to happen that are currently not happening. It might even save some buildings currently considered too expensive to restore.

https://www.thetimes.com/uk/london/article/shortage-craftsme...

>>The capital’s heritage buildings — 600 of which are in urgent need of restoration — are kept from disrepair by an ever-shrinking pool of master craftspeople

https://www.heraldscotland.com/news/23299045.shortage-stonem...

Re:We taught robots to carve marble sculptures by curtisblaine on Thursday November 19, 2026 @08:06AM (#50559596)
> Stone carving never disappeared, but rising costs pushed it out of ordinary construction

Why "rising costs" though? Are the carving tools significantly more expensive? Or did we just find a way to do shittier stuff with less expense and we called carving too expensive?

Re:We taught robots to carve marble sculptures by LtWorf on Thursday November 19, 2026 @08:12AM (#50559654)
I think estate developers just managed to somehow convince our regulators that copy pasting the same building across the world is unique and modern and we should do it.
Re:We taught robots to carve marble sculptures by bluGill on Thursday November 19, 2026 @09:10AM (#50560338)
For good reason. There are things that work in building layouts and things that don't. Everything looks the same, but the inside that you work with is often very functional. Even in the most work of art buildings, the building itself will fad into the background of all the things you do inside - unless the building is hostile to doing the things you are inside to do.
Re:We taught robots to carve marble sculptures by LtWorf on Thursday November 19, 2026 @03:43PM (#50566078)
All buildings are an open plan stuffed with desks, separators to make sure you might as well be underground, neon lights, carpeting.
Re:We taught robots to carve marble sculptures by voidUpdate on Thursday November 19, 2026 @08:13AM (#50559661)
People like being paid in line with inflation etc, and theres likely a lot less stonemasons around today. It was probably a lot cheaper to get a marble carving made in ye olden days than now
Re:We taught robots to carve marble sculptures by gauntr on Thursday November 19, 2026 @08:19AM (#50559739)
The amount of people that actually know and do that kind of work has probably become very small while the demand might still be there. High demand, low supply -> usually increasing prices. There's generally a big decline in skilled trades and with that the same problem is coming up in other sectors as well.
Re:We taught robots to carve marble sculptures by sokka_h2otribe on Thursday November 19, 2026 @08:54AM (#50560146)
Balmers cost disease
Re:We taught robots to carve marble sculptures by readmeonce on Thursday November 19, 2026 @12:21PM (#50562991)
Its interesting because take education: the professor, no matter how good he his, is still capped by the student learning rate. Many times these jobs are also kind of based on "spend your day with the kids" at school and get to live with that wage. And we really don't care about "performance".
Re:We taught robots to carve marble sculptures by bluGill on Thursday November 19, 2026 @08:59AM (#50560190)
Stone carving was always expensive. What changed is other parts of building went down and so not stone carving would be a much larger share.
Re:We taught robots to carve marble sculptures by iamacyborg on Thursday November 19, 2026 @09:14AM (#50560383)
An article on Works in Progress has a good breakdown of the situation.

https://worksinprogress.co/issue/the-beauty-of-concrete/

Re:We taught robots to carve marble sculptures by mauvehaus on Thursday November 19, 2026 @08:46AM (#50560048)
Two things:

1) A great podcast about why we're bad at statues in the US:

https://slate.com/podcasts/decoder-ring/2026/07/how-taste-po...

2) This isn't a particularly interesting model to sculpt. The parent model is a scan of a ceramic rabbit, and it doesn't have crisp details like really good marble sculptures do.

I have seen Venus Victrix[0] in person, and the detail in the mattress the figure is lying on is absolutely transfixing. You would swear the marble would softly yield if you put your finger on it. There's a detail rendered around the edge of the mattress that likely represents embroidery and it's unbelievably crisp, even as it follows the folds and creases in the mattress.

If we're going to have robots sculpt marble, that is the standard we should be reaching for. If we're reaching for that, I think we're going to find that modeling the finished product in 3d is going to be a significant fraction of the work of actually carving it in stone. I think we're also going to find that the mastery also lies in the tiny decisions the sculptor makes as they work, informed by how light plays off the material in different directions in real time throughout the day.

Can the process in the article achieve results suitable for mounting at the top of a building and viewing from ground level? Probably, and if not now, certainly with time. Can it sculpt something that will command your attention in reverent, slack-jawed awe for hours? I don't see it happening.

[0] https://en.wikipedia.org/wiki/Venus_Victrix_(Canova) Seriously, this and Bernini's David, also at the Galleria Borghese, are worth the trip to Rome to see. If there were nothing else in Rome worth seeing and the food was terrible, they would justify the pilgrimage on their own.

Re:We taught robots to carve marble sculptures by mattkrause on Thursday November 19, 2026 @10:34AM (#50561463)
It might just be me, but....

The rabbit sculpture is a little underwhelming, even given the simplicity of the model. The tool marks are pretty obvious and aren't really used to artistic effect either.

Re:We taught robots to carve marble sculptures by stronglikedan on Thursday November 19, 2026 @10:47AM (#50561655)
There's also the one with the veil where they carved the marble so thin that it's translucent. Amazing
Re:We taught robots to carve marble sculptures by rafaelgoncalves on Thursday November 19, 2026 @12:44PM (#50563345)
Oh, i remembered that too and they are absolute stunning and amazing as you also said:

https://en.wikipedia.org/wiki/The_Veiled_Virgin

https://en.wikipedia.org/wiki/Veiled_Christ

Re:We taught robots to carve marble sculptures by brettermeier on Thursday November 19, 2026 @02:09PM (#50564707)
Wow!
Re:We taught robots to carve marble sculptures by dekhn on Thursday November 19, 2026 @11:01AM (#50561833)
One of my best art moments was the Vatican museum. At one point, there's a garden, but most people instead head past it. I walked into the garden and came across https://en.wikipedia.org/wiki/Laoco%C3%B6n_and_His_Sons with nobody else around and spent ten minutes inspecting it in detail (including around the sides). This is somethiing that was carved 2000 years ago! Absolutely stunning, and much more appreciable in a quiet, relaxed setting.

I fully expect that robots will be able to carve novel masterpieces in 10 years.

Re:We taught robots to carve marble sculptures by krisoft on Thursday November 19, 2026 @11:50AM (#50562564)
> modeling the finished product in 3d is going to be a significant fraction of the work of actually carving it in stone.

Of course. But what is the problem with that?

We have the same situations with many other things. With printers: It takes way more effort to write a book worth printing than the actual effort of putting in the reams of paper into the printer and hitting the print button. Same with 3d printing. People spend days, weeks, months, or years modelling something interesting and then it is relatively easy to get it printed once it is designed.

> Can it sculpt something that will command your attention in reverent, slack-jawed awe for hours? I don't see it happening.

I don’t see why it couldn’t carve a model which evoke those emotions into stone. And i used my words deliberately there. Because i would call the person who made the model the sculptor. I wouldn’t say that the machine sculpted anything.

The machine is a machine. It carves the stone. We can talk about how accurately it does what it does, we can talk about the surface quality it leaves behind. We can even talk about what geometries it can or can’t tackle due to the particular arangement of the arm and the spindle.

If those “datasheet properties” are good enough, then all you need to do is get a good artist who is handy with some modelling software let them play around with it and you will get your “awe inspiring”.

Re:We taught robots to carve marble sculptures by runxel on Thursday November 19, 2026 @08:54AM (#50560134)
[delayed]
Re:We taught robots to carve marble sculptures by buildsjets on Thursday November 19, 2026 @11:33AM (#50562307)
Came here to post this, but you already have. So I will just add that everyone should visit the link just to see a berobed monk with a tonsured haircut (think Friar Tuck) running desktop CAD and multiaxis CNC.
Re:We taught robots to carve marble sculptures by caidan on Thursday November 19, 2026 @09:04AM (#50560272)
“de-extinction, not displacement”

The only voice left is Claude’s.

It was cheaper to spend a trillion dollars on LLM’s and robotics and then “teach” a robot to carve out this first year bunny assignment rather than pay any artists or stonemasons. Historically their work can last for thousands of years and bring beauty to millions yet unborn who will marvel at the magnificence of this creation. But you know this little stone rabbit is cool too. I’m sure it will make a useful doorstop. Now we can have stoneslop!

Re:We taught robots to carve marble sculptures by pentakkusu on Thursday November 19, 2026 @09:16AM (#50560422)
Marbleslop
Re:We taught robots to carve marble sculptures by DonHopkins on Thursday November 19, 2026 @12:43PM (#50563325)
Not as low-effort as your soulless unoriginal easily predictable drive-by human slop. That's not even good enough to be a prompt. Try harder. If you can't think of anything better to post, then go carve a rock yourself.
Re:We taught robots to carve marble sculptures by pentakkusu on Friday November 20, 2026 @04:57AM (#50572475)
wow, I just tried to be funny, ease up a little
Re:We taught robots to carve marble sculptures by zenapollo on Thursday November 19, 2026 @09:17AM (#50560425)
I watched this in a museum in Prague on a big screen, it's incredibly and enjoyably artful. That being said I couldn't help notice the final texture felt off. I suspect the techniques are already improving. I watched it Nov 26 but apparently according to yt it's several years old already. I also don't think this one is AI based at all.

https://youtu.be/fVga1ay2DZk

Re:We taught robots to carve marble sculptures by numpad0 on Thursday November 19, 2026 @09:30AM (#50560601)
[delayed]
Re:We taught robots to carve marble sculptures by ewiesler on Thursday November 19, 2026 @10:27AM (#50561353)
CNC machining techniques already exist, but hey require extremely manual use of largely drag and drop software like Autodesk's Powermill which can take weeks to months to program a statue. Please see a new section called: "Complex CNC machining already exists. What is actually new?" where we explain this better. We are fully automating the hardest bottleneck of this process which is the manual toolpath programming.
Re:We taught robots to carve marble sculptures by GLGirty on Thursday November 19, 2026 @12:46PM (#50563380)
This is fascinating work, thanks for sharing. My first thought about the bunny is that the voxelation process produces crude tools marks that look very much like layer lines in extrusion printing. I imagine a future version of your tooling where the model is annotated with surface details like fur direction, courseness, 'wavyness', etc. The annotations will guide the tool path on the finished product so the lines can become features, not glitches.

Extrusion printing is showing some promising work with surface 'ironing' that I imaging will evolve similarly.

I look forward to seeing how this work evolves over time.

Re:We taught robots to carve marble sculptures by classified on Thursday November 19, 2026 @09:36AM (#50560679)
So this is a more flexible kind of CNC milling?
Re:We taught robots to carve marble sculptures by the__alchemist on Thursday November 19, 2026 @09:37AM (#50560684)
Bun alert!
Re:We taught robots to carve marble sculptures by Kaibeezy on Thursday November 19, 2026 @10:09AM (#50561125)
Mardi Gras floats have been done this way for years. OK, polystyrene foam, but is there a real difference from marble other than settings (speed, tool changes, precision)?

https://www.fox8live.com/story/31913419/robot-brings-mardi-g...

https://www.youtube.com/watch?v=guIJzGy1hzA

Re:We taught robots to carve marble sculptures by virtualritz on Thursday November 19, 2026 @10:10AM (#50561126)
The Stanford bunny direly needs an upgrade (like the Utah Teapot had several of) that recovers details the original had and thusly exhibits more shape contrast.

It's especially a sub-par choice for the demonstration at hand because the surface texture is too smooth. At the time, digitizing smoothed/skipped/undersampled details.

See a picture of the original[1] and compare to the detail on the marble carving.

[1] https://i-blog.csdnimg.cn/blog_migrate/383571b9f94546ab262f7...

Re:We taught robots to carve marble sculptures by xnx on Thursday November 19, 2026 @10:13AM (#50561177)
Re:We taught robots to carve marble sculptures by caidan on Thursday November 19, 2026 @11:19AM (#50562085)
I was curious too, dug it up here.

https://faculty.cc.gatech.edu/~turk/bunny/bunny.html

Second image down. Parent is wrong, this definitely should have been updated. Much more detail in the original.

Re:We taught robots to carve marble sculptures by bliteben on Thursday November 19, 2026 @10:11AM (#50561137)
A long way from a Bernini.
Re:We taught robots to carve marble sculptures by Guthwine on Thursday November 19, 2026 @10:11AM (#50561140)
Technologically advanced, sure, but still less impressive to me than a human sculpting marble. Two human hands, and a human brain, carving David! Can you imagine! The hours of planning, of work, not to mention the years of experience, the last-minute changes of plan as he discovers a certain vein in the marble...A machine doing an exact replication would not be anywhere near the masterpiece that Michelangelo's is.
Re:We taught robots to carve marble sculptures by MattDamonSpace on Thursday November 19, 2026 @10:13AM (#50561169)
Sure but I would still like nicer things in the world, and if the reason we don’t have them is Cost, then I’m happy someone’s working to make gorgeous marble cheaper (even if it’s not the work oh solely human hands)
Re:We taught robots to carve marble sculptures by onemoresoop on Thursday November 19, 2026 @10:45AM (#50561624)
Do we really need tacky CNC marble sculptures everywhere?
Re:We taught robots to carve marble sculptures by pksebben on Thursday November 19, 2026 @10:47AM (#50561651)
This. We don't get (or rarely get) works like David because people just don't have the same kind of time they used to - which seems unlikely to resolve, so I'll take pretty much anything that makes public constructions less boring.

That said, the whole air-rights footprint-build issue isn't one of capability so despite the ability to create sophisticated friezes on the cheap, I do wonder how much we'll actually use them...

Re:We taught robots to carve marble sculptures by barbariangrunge on Thursday November 19, 2026 @10:14AM (#50561190)
Sculpting teacher here. Ceramic and oil clay--marble is scary.

On the one hand, there is something special about an artist made sculpture. But on the other, in north america we have almost no cool sculpture around us day to day. So few people can make them and there is seemingly limited demand due to costs

If companies start producing millions of sculptures and selling them at walmart or dollarama in bulk, will they still be cool? Or will we make them in our garages in 2036 with robot arms and ai generated designs informed by amazon ring camera footage of our neighbourhoods?

As an artist, what does your role become? Does anything remains scarce in art? Would love to hear some speculation

Re:We taught robots to carve marble sculptures by theplumber on Thursday November 19, 2026 @10:20AM (#50561244)
>> As an artist, what does your role become? A prompter like most of the jobs that will transform into promoter jobs. Different skills will become more valuable.
Re:We taught robots to carve marble sculptures by jszymborski on Thursday November 19, 2026 @10:29AM (#50561394)
I'm not an artist, so maybe I'm missing the mark, but I feel like the hard part of making art should be learning how to express or project your artistic vision or complex emotion or some other aspect of human experience into physical space. I'm not sure I subscribe to the idea that the difficulty of the medium you choose is necessary. Sometimes it's the point of the work, but I don't think you're getting the most out of the Pietà if your take home is "wow, that must have been difficult" (although that's just my opinion).

We can look at other art forms that are pretty accessible w.r.t. barrier to entry. Most folks learn creative writing as school children and master the fundamentals quite quickly. Sure, there's reams of bad (and good, don't come at me) fanfic at ao3 as well as middling pulp at the gas station, but I don't think that stops great works from appearing or being any less special.

Similarly, we see pretty terrible statues in public places quite frequently (I'm thinking the derpy Ronaldo statue or the Lucille Ball statue in Celeron).

So all that to say, I'm optimistic that if something like this meant statues were easy to make and you can design one in your underwear in a few hours and hit "print", sure the volume of shite statues would explode, but I think that just raises the floor on quality a bit and leaves the ceiling in tact.

Re:We taught robots to carve marble sculptures by david927 on Thursday November 19, 2026 @10:36AM (#50561487)
The Walmart effect doesn't worry me because we can already have that with prints of the masters and few do it.

Instead, I'm inspired. Could we democratize and evangelize culture this way?

The American city I live in has 300,000 people. Why can't it have a large building that has full replicas of the great works of art? The Mona Lisa, Whistler's Mother (or Falling Rocket), Van Gogh's Sunflowers or self-portraits (with impasto). Marble sculpture replicas of Canovo, Bernini, Rodin. A small, one-stop shop of some of the world's great works, for people who will never see it otherwise.

Re:We taught robots to carve marble sculptures by unpleasurable on Thursday November 19, 2026 @10:54AM (#50561732)
I for one wouldn't have the Mona Lisa in my house
Re:We taught robots to carve marble sculptures by cruano on Thursday November 19, 2026 @11:33AM (#50562301)
Even beyond that, this would let people interact with these works in a way no one really has in the past. Have kids make hats for the Roman busts, or paint themselves into Renoir's street scenes.

One of my favorite parts of the V&A in London is getting really up close to the Trajan's Column [1] cast that they have, which you cannot really do with the real place.

[1] https://en.wikipedia.org/wiki/Trajan's_Column

Re:We taught robots to carve marble sculptures by shermantanktop on Thursday November 19, 2026 @10:57AM (#50561783)
I rented a house in Hawaii (outside Hilo) that had two 6 foot horse sculptures by the pool. They were expensive marble, but ugly, and included realistic penises for some reason.

Scarcity due to expense means catering to the taste of those with money, no matter how bad their taste is.

Re:We taught robots to carve marble sculptures by BurningFrog on Thursday November 19, 2026 @11:13AM (#50562005)
When cameras outcompeted human painters, the humans started doing "modern" non figurative art. Cameras can't compete with Dali's imagination.

This had some success, but mostly painters had to find other jobs. Some became photographers.

Our appreciation of art is usually a mix of liking the art itself and admiring the artist. Machines can make technically better art, but I think humans will always be more admired.

Re:We taught robots to carve marble sculptures by bagacrap on Thursday November 19, 2026 @10:21AM (#50561256)
If marble sculptures were of functional utility I guess this would be cool.

If the whole purpose of a marble sculpture is to marvel at the beauty a human created -- not being the type to surround himself with marble, I am only guessing here -- then I don't see the point of this. Except it was probably a fun project.

Re:We taught robots to carve marble sculptures by superxpro12 on Thursday November 19, 2026 @11:12AM (#50561991)
"I want AI to do my laundry and dishes so that I can do art and writing, not for AI to do my art and writing so that I can do laundry and dishes."
Re:We taught robots to carve marble sculptures by odyssey7 on Thursday November 19, 2026 @11:15AM (#50562032)
Richmond, Virginia has had an infamous history with its statuary. In recent years, many of the more fraught works have been removed.

It’s been in the back of my mind for a while, why not install new monumental sculptures that fill the aesthetic vacuum? I have no idea how cities plan projects like this.

Re:We taught robots to carve marble sculptures by sinuhe69 on Thursday November 19, 2026 @11:42AM (#50562447)
[delayed]
Re:We taught robots to carve marble sculptures by BeratnasGas on Thursday November 19, 2026 @11:51AM (#50562589)
The positive impact of architectural ornamentation on our urban environment cannot be understated. Think what Gaudi could have done with this technology. Sure it's a robot but the results could be more human than anything we're building today.
Re:We taught robots to carve marble sculptures by malshe on Thursday November 19, 2026 @12:16PM (#50562921)
Call me when robots can create masterpieces like this one: https://s1.cdn.autoevolution.com/images/news/gallery/tesla-c...
Re:We taught robots to carve marble sculptures by jgbuddy on Thursday November 19, 2026 @12:53PM (#50563464)
teaching, or programming?
Re:We taught robots to carve marble sculptures by frnz on Thursday November 19, 2026 @01:16PM (#50563816)
[delayed]
Re:We taught robots to carve marble sculptures by aanet on Thursday November 19, 2026 @02:50PM (#50565317)
This is fascinating!!

I'm both awestruck at the at the final sculptures, as much as I am fascinated by the (hi-tech) robotic carving aspects of it.

The Feynman statue looks awesome (https://www.monumentallabs.co/work?project=Richard+Feynman ) as does Athena (https://www.monumentallabs.co/work?project=Athena+Promachos )

The details are just jaw dropping. Are the details carved by human hands or by the robot itself??

As an amateur artist and as a robotics techie, I'm both fascinated -- and alarmed -- by the use of AI in the process. Part of the artistic process has always been the "human struggle", ranging from inspiration to the actual hard work of putting pencil / paint / chisel to work. Often, but not always, that has determined our value of the work, whether it is the Sistine Chapel or the Last Supper, or indeed Shakespeare's plays. With AI tools short-circuiting the necessary "burden" of the artistic process, whether generating the next token, or next pixel, the chunk of stone, or the next note in a musical score, our value of that resulting work changes (and has changed). Sometimes dramatically. Who'd prefer the n-th copy of Warhol's "Campbell Soup" or the Marilyn posters if they had the opportunity for the original (painting?)?? Which would you rather hang in your living room??

For sculptures, the work is a physical entity, in your face, sometimes architecturally, sometimes not. Even then, does the provenance of the sculpture actually diminish its value?? I'm not so sure. I do welcome these robotically made sculptures, but I do wonder if/when there are too many of them, all around. Kinda like AI-slop articles on the webz.

I dont have any solid answers... just some feelings (pls. dont call 'em vibes)

Regardless, at least for now, I do love these, and I'm just fascinated that this tech is being used to create more art. We all could use more of it in our lives.

[To the OP: I have a few more ideas on what else we could create. Happy to chat.]

Re:We taught robots to carve marble sculptures by iamanatom on Friday November 20, 2026 @12:16AM (#50570458)
Great article! It would be nice to carve draperies, nets

'The Release from Deception' (1754) by Francesco Queirolo

https://mymodernmet.com/francesco-queirolo-the-release-from-...

Re:We taught robots to carve marble sculptures by hoomanyyy on Friday November 20, 2026 @04:22AM (#50572197)
i think at this moment and at this level of world knowledge we cant do it , ofcourse that we are in a good level of knowledge and its not impossible but we cant do this yet