Another story is the scratch-resistance. For that it would be sufficient to coat the surface of the lens with a thin layer of diamond. Which is done in several applications.
Isn’t the layer caused by the former? For a given required refraction, isn’t the chromatic dispersion the same?
In complex lenses corrections can be made, but for a simple single eyeglass lens, how is chromatic dispersion affected by anything apart from simple refraction?
https://en.wikipedia.org/wiki/2061:_Odyssey_Three?wprov=sfti...
And it's not just key metal deposited on the screen, there are deep grooves cut into it.
Your brass keys should only be about 3.0, and gorilla glass a 9.0- you should be able to rub keys into brass dust all day long and not mark the screen.
I store my keys right in my pocket with my glass iPhone SE, and it doesn't have a mark on it.
I suppose it is possible you have keys with some weird material or coating, or as another poster suggested- maybe something like an abrasive dust got stuck on your key.
Typical keys are made from nickel plated hardened steel and nickelsilver. Considering the shiny coating is long gone and the keys are ferromagnetic, I assume it's the first. The keys are certainly hard enough to scrape my glass ceramic stove.
And reports online say that gorilla glass victus is the mist scratch prone gorilla glass, scratching at or around 6 already :/
My Pixel 4a, meanwhile, was in my pocket all the time and never got a scratch.
This is not sufficient?
But if it is true, then I'd say that sapphire is a poor choice for mobile phones. IME I'm far more likely to drop the phone, preferably on some form of hard surface, that to scratch it. Phones are nowadays so ridiculously big, that there's zero chance I'll have anything else in my pocket.
The difference between my watch (which was 4 years old at the time) and a colleagues almost brand new apple watch (without the sapphire) was really telling, is his was lightly scratched on the edges despite him being quite careful, and I was exceedingly reckless with mine as I considered it old- yet there was not a single defect.
That was a major reason for me to upgrade to the LTE of the next version of apple watch that I bought.
Long story short, it is more scratch resistant but also more prone to break. So be careful.
I suspect the edges are more at risk than the face, as I've struck the face very hard against the edge of a scaffolding pole and there was no damage - which, actually shocked me a lot based on the force.
Tiny replacable airbags, on the corners. Preferably it should somehow detect the elasticity of the surface its falling to or going to hit.
But there are other devices with better sapphire that actually live up to the hype.
I have now had watches for 10 years without issue and my phone displays seem to scratch.
I’m not doubting you’re correct, I never boight it for this reason, it was just an interesting retrospective observation. Clearly its working for me, and I’m not sure I have anything with gorilla glass.
Unless the Pixel 7 has it.
EDIT: My Pixel 7 does have gorilla glass indeed and it has two scratches on the display despite being extremely rarely used. (its my work phone and sits on my desk mostly)
[0] https://geology.com/minerals/photos/mohs-vickers-comparison-...
Edit: Achromotopsia
And, honestly, that would be really really cool.
Yeah, there are other materials with better refractive indices and that are tougher and cheaper and dont shatter. Sure.
But if we can get diamonds down to something that could be made into lenses for the (very high end) retail market, man, that would just be so cool!
The only thing that beats it is single crystal boron arsenide which has some obvious downsides, being of course much more expensive and involving arsenic, which is considered a bad thing.
And with that, diamond is destined to be even cheaper than silicon, I think. Much more available and easier to purify, the hard part is rendering it into a crystal which is relatively solved.
but perhaps it's not that big of an issue, not sure.
Diamond layers within ICs to help get the heat out are being considered for future GPUs.[2] Again, it's not a magic bullet.
[1] https://www.diamond-materials.com/en/products/thermal-manage...
[2] https://www.sciencedirect.com/science/article/pii/S266638642...
Which shatters on contact with a small bone.
The meat without bones and also most vegetables can be handled by the currently existing ceramic kitchen knives and they could be handled by a diamond knife (though diamond, even in polycrystalline form, is much less tough than zirconia ceramic or silicon nitride ceramic, which are better suited for kitchen knives).
They have the advantage of keeping a sharp edge for a much longer time than steel blades, but they cannot be sharpened again with simple tools and for some purposes it may be inconvenient that the zirconia blades cannot be made as thin as the best steel blades, due to the risk of breakage, and there are also less choices of blade forms, e.g. there are no bird's beak zirconia blades, which is the best shape for peeling and paring vegetables.
High-quality zirconia kitchen knives, like those made by Kyocera, are very pleasant to work with. Diamond blades could not feel much different, even if they should remain sharp for a longer time, but with a higher risk of breakage when mishandled.
I'm no materials-scientist, but I did some napkin-math on that once and it came out to some ridiculously-thin-sounding layer of diamond.
Vacuum volume 1.00 m^3
Vacuum radius 0.62 m
Air density 1.23 kg/m^3
Displaced mass 1.23 kg
Diamond density 3250 kg/m^3
Diamond volume 3.77E-04 m^3
Sphere surface area 4.84E+00 m^2
(Thin shells can be approximated by ignoring curvature)
Shell thickness 7.79E-05 m
Shell thickness 77.94 μm (microns)
Human hair thickness 17 to 181 μm (microns)
So the big vacuum-ball somehow needs to withstand crushing using only the strength of a diamond skin, and that skin is around as thick as (some) human hairs. It has to be thinner if you want it to float with a payload.Remember: The walls of party-balloons and soap-bubbles are a very different situation: They can have extremely thin skins because the gas inside is doing almost all the "don't get crushed" work, the skin is really just there to keep the two gases from mixing.
Or perhaps they just build surfaces out of more complicated things than carbon. Hydrocarbons could be as easily assembled as diamond with similar techniques, and are a lot lighter than pure carbon. Plus they would want to put electronic advertising on the surface of the ball anyway, so it’s got to have a bit more going on to form LEDs and whatnot.
So while many smaller spheres--or pockets sharing walls--might be easier to engineer, the square-cube law [0] eats away at your lifting-power as everything becomes mostly-diamond with very little air-displacing vacuum.
> Each aerostat in the dog pod grid was a mirror-surfaced, aerodynamic teardrop just wide enough, at its widest part, to have contained a pingpong ball.
It doesn't say they aren't relying on some kind of down-thrust, but at that point I'd wager it's much easier to skip the whole marginal buoyancy part entirely. Use those conductive diamonds for an ionic thruster or something.
It’s called “The Diamond Age, or a Young Lady’s Illustrated Primer” by Neal Stephenson. I definitely recommend it.
Atomic fabber = chip fabs making things on ~10 atom scales
3D printing homes is possible now, just a bit niche
And it also contained the text of every other book ever written, of course.
And arguably it was that character’s mother too.
I’m going to have to reread this one soon; it’s such a good story.
Environmental sensing is a little weak in our own devices, but in theory your cell phone could listen to everything you do and (externally) analyze it for things like a bad diet. You'd have to point the camera intentionally at things you're doing for it to capture that information.
Now, no one is going to make a product that shocks people holding it, yet this isn't an impossibility. Failing to login, or having the camera capture the wrong person is using could very easily be designed in to the product. No one is going to do that for fear of lawsuits.
But remember the subtlety of it; the constable didn’t have his face recognized, or log in, he literally made a promise to the book while pretending to talk to the owner. It’s still mostly science fiction :)
One of the hibernation screens for one of my ebook readers reads "Don't Panic", for all the obvious reasons. (Different franchise, similar concept.)
The same way rolls royce no longer sells luxury cars to stuffy British aristocracy but makes a mint building huge jet engines.
RR cars has been a BMW subsidiary for 21 years, having been separated out from the aircraft engine manufacturing business in the 1970s
https://en.wikipedia.org/wiki/Rolls-Royce_Motor_Cars
https://en.wikipedia.org/wiki/Rolls-Royce_Holdings
(unless that's exactly what you meant of course, Rolls Royce Holdings indeed no longer makes the cars... )
Tiffany's isn't suddenly going to be cheaper.
DeBeers are just positioning on price, natural more traditional and romantic, etc.
Who wants to know their engagement ring was half price?
I mean...a ton of people. My fiancee and I just purchased her ring together and it was pretty much a silent agreement from both sides that lab grown was the way to go (confirmed out loud of course). The stone we ended up getting was about 1/10 the cost the closest natural we could find, and both of us agreed that there are way better ways to spend that money with everything else in the future.
Many people also love jewelry but would rather not have something worth a brand new car on their hand.
sounds like may be soon we'll see diamond wafers for the chips (especially as the price of processed wafer from a fab increases, the cost of the source wafer itself is becoming less important) Add to that X-ray lithography, and the Moore's Law will continue for quite a while.
Sadly GaN suffers from horrible p-channels (they use resistor/nmos logic as the non-differential logic family for GaN ICs), and SiC from kinda sorta delaminating gate oxide (JFETs are fine though, and vertical ones are very nicely behaved, including a lot of resilience like avalanche resistance (though actual (non-capacitive) current flow through the gate junction has to be limited to prevent damage)).
N-type diamond is just difficult, along with diamond itself at a purity approximating "intrinsic"/"none" levels of doping. The issue is that you have to continually etch graphitic carbon during the CVD process, requiring aggressive chemistry.
It's worth noting that the Chinese word for diamond is literally "drill stone", which highlights its application as an abrasive more than jewelry.
Wouldn’t a diamond skillet be incredibly non-stick, easy to clean, and totally non toxic?
With the current focus on PFOS and just amount of garbage materiel used to prepare our foods, I think some innovation is just around the corner.
It's already here! Stainless steel for pots, carbon steel for pans.
Once I got my first carbon steel pan (not cast iron) I knew it was game over for the teflon pans in my house. I'm now gradually replacing the teflon pans with carbon steel, and then I'll never have to replace another pan in my lifetime.
The upcoming PFAS ban in Europe will probably accelerate this transition greatly, unless DuPont et al have too much influence over politicians...
Cooking an egg is a big no-no, I need to think about when to squeeze a lemon or when to put my tomato sauce otherwise I might damage the seasoning. Nothing blocking but definitely a lot of things I don't want to think about.
The power and time must be selected carefully, to avoid explosions, but once the right combination is determined it will always be perfectly reproducible.
I prefer to separate the egg whites and the yolks before cooking (and mix them with different ingredients, possibly whipping the egg whites first), but making fried eggs or scrambled eggs is as easy.
The eggs can be cooked alone and mixed later with other ingredients, or they can be mixed with other ingredients before putting them in the oven.
> Diamonds are now something you can buy by the kilo, in plastic bags.
I can’t wait to use diamond cookware. A pan with a thin layer of 430 stainless steel for induction, a wafer of diamond, and then another thin layer of stainless on top will be amazing. Almost perfect evenness over any cooktop.
https://en.wikipedia.org/wiki/Material_properties_of_diamond...
I had no idea it was that good. I wonder why they don't make them that way then, as expensive cookware already seems to be a high margin business.
The mismatched coefficient of thermal expansion could also be a problem.
Steel for induction and strength. Diamond (like copper cores) for heat traversal.
That said, if they can figure out vapor depositing diamond onto stainless steel, I'd take a diamond surface over an enamel surface. Provided they can figure out how to make it perfectly flat rather than so jagged at the molecular level that literally everything sticks to it.
("wouldn't that burn? It's just carbon after all": only if you give it the cast iron pan treatment and manage to have it sit on so much gas for so long that you get it up to 700C, which would make no sense)
The commercial side has made huge progress, too. Look up "diamond making machine" on Alibaba. You can buy a high-pressure, high temperature six sided press for about US$200,000. A chemical vapor deposition machine is about the same price.
De Beers, the diamond cartel, has an R&D operation, Element Six. They sell synthetic diamonds for lasers and other exotic applications. The technology is good enough to achieve flaw levels in the parts per billion range, and to make diamond windows for lasers 10cm across.[1] This is way above jewelry grade.
Over on the natural diamond side, there's been a breakthrough. The industry used to break up some large diamonds during rock crushing. Now there's a industrial X-ray system which is used to examine rocks before crushing to find diamonds. It's working quite well. A 2500 carat diamond was found recently.[1][2] TOMRA, which makes high-volume sorters for everything from recyclables to rice, has a sorter for this job. This is working so well that there's now something of a glut of giant diamonds too big for jewelry.
The finishing processes of cutting and polishing have been automated. The machinery for that comes mostly from China and India.
Diamonds are now something you can buy by the kilo, in plastic bags.
[1] https://e6-prd-cdn-01.azureedge.net/mediacontainer/medialibr...
[2] https://www.forbes.com/sites/amandakooser/2024/08/23/monster...
[3] https://ikcabstracts.com/index.php/ikc/article/download/4101...