News for hackers. Stuff that matters.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by MarkMarine on Tuesday January 09, 2024 @01:55AM (#38923215)
I was responsible for safe for flight inspections on military aircraft and the photo included in that post is completely insane to me.

Those bolts being loose (and they are BIG bolts) would mean multiple people in the installation process didn’t do their jobs, and signed their life on the line saying they did.

When I did maintenance, there was someone (QA) there to witness every torqued bolt, inspect every safety wire and installed part.

There is something rotten in Boeing.

Re:United finds loose bolts on plug doors during 737 Max 9 i... by RF_Savage on Tuesday January 09, 2024 @01:59AM (#38923230)
The management imported from McDonnel-Douglas?

The same management that drove it to ground?

The fish rots from the head. And these constant problems sure do sound like a new company culture of cutting corners instead engineering first.

Re:United finds loose bolts on plug doors during 737 Max 9 i... by glcihgnwe on Tuesday January 09, 2024 @03:36AM (#38923751)
the timeline doesn't match up, the company delivered plenty of airplanes that didn't lose their doors mid-flight after the Douglas merger. The recent quality nosedive is timed more with their recent DEI push. It's probably toxic for a commercial airline manufacturer to center anything other than engineering, I've worked with people who left Boeing and the stories they tell me about incompetent leaders promoted due to DEI is more important than safe airplanes totally explains the Current state of their product line.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by yftsui on Tuesday January 09, 2024 @04:01AM (#38923878)
I heard a similar story regarding Boeing’s North Charleston factory due to that push, it leads to some Boeing customers request the last inspection done in the Everett factoryinstead before delivery. My bigger worry is 787 as apparently it is moving to SC.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by boxed on Tuesday January 09, 2024 @03:45AM (#38923797)
You can prop up a bad system for many years by having a lot of workers still around from the old system. It takes time to fully drive a company as good as Boeing into the ground.

Managers think they are the reason anything happens, but fortunately in this case this is a delusion. In places where a great manager tries to turn a business around that is broken that's a bad thing.

Re:United finds loose bolts on plug doors during 737 Max 9 i... by matthewmacleod on Tuesday January 09, 2024 @04:20AM (#38923980)
“This aircraft failed because Boeing is too woke” is a pretty amazing take, I’ll grant you that.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by didntcheck on Tuesday January 09, 2024 @04:27AM (#38924033)
"because they were prioritizing other factors instead of competency"

That's not a particularly outlandish take, and the other factor is orthogonal

Re:United finds loose bolts on plug doors during 737 Max 9 i... by Snow_Falls on Tuesday January 09, 2024 @06:27AM (#38924875)
Do you believe that other factor is wokeness, or is it maximising profit
Re:United finds loose bolts on plug doors during 737 Max 9 i... by account42 on Thursday January 11, 2024 @04:55AM (#38950059)
Corporate wokeness is about maximising profit by acquiring funding conditional on said wokeness.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by foldr on Tuesday January 09, 2024 @05:23AM (#38924436)
GP appears to have a bee in their bonnet about wokeness (see post history). Unless they provide some evidence to support their take, I see no reason to take it seriously.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by nmacias on Tuesday January 09, 2024 @04:23AM (#38924006)
this site, yikes. In summary, we don’t know what happened yet, but you assume it’s the direct and obvious outcome of <your political issue>? And that <many people are saying>?

In that’s the game, then, I suspect the Spotify team was onsite to record a behind the scenes at Boeing podcast, and in the process replaced the locking nuts with Joe Rogan stickers.

Re:United finds loose bolts on plug doors during 737 Max 9 i... by aredox on Tuesday January 09, 2024 @04:49AM (#38924202)
The MD merger is the reason quality nosedives. Management is responsible for ensuring a robust quality culture. If (if!) a few DEI trainings are enough to destroy that quality culture, then something is very wrong at Boeing anyway, and it was only a question of time.

But of course, the parent comment isn't made in good faith. The 737 MAX crashes happened end 2019-2020, and Boeing didn't release its first-ever diversity report more than a year later: https://www.forbes.com/sites/lorenthompson/2021/04/30/boeing...

As for why it didn't nosedive immediatly after the merger, these kind of bankruptcies tend to happen "Gradually, Then Suddenly".

Re:United finds loose bolts on plug doors during 737 Max 9 i... by leptons on Tuesday January 09, 2024 @03:15AM (#38923635)
The "MAX" in 737 MAX means "maximum profit", not "maximum safety".
Re:United finds loose bolts on plug doors during 737 Max 9 i... by siva7 on Tuesday January 09, 2024 @03:18AM (#38923647)
You're joking but it's the real meaning conveyed to their customers, the airliners.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by rob74 on Tuesday January 09, 2024 @03:47AM (#38923806)
Yeah - that's why the leading low-fare airlines (Southwest, Ryanair) love it - so it's up to the customers to say that they no longer want to fly with an over 50 year old design that was initially a regional airplane but is now being used for transatlantic flights.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by dotancohen on Tuesday January 09, 2024 @09:10PM (#38935278)

  > that was initially a regional airplane but is now being used for transatlantic flights.
And had its engines moved to an unstable location 50 years after the type first flew, necessitating software controls to compensate for which, paradoxically, are there so that the pilots do not need to train on the new aircraft's inherent flight characteristics yet should be disabled by the pilots under some emergency situations.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by markdown on Tuesday January 09, 2024 @02:41AM (#38923457)
> The management imported from McDonnel-Douglas?

I've heard this since they killed hundreds of people in the two crashes. Why are they being protected? They have names.

Re:United finds loose bolts on plug doors during 737 Max 9 i... by rob74 on Tuesday January 09, 2024 @03:20AM (#38923661)
Because the shareholders like the management? Cutting corners to increase (short-term) profits is more popular with them than focusing on quality. And now that the company has been in the red consistently since 2019 (https://www.statista.com/chart/20660/boeing-earnings-loss/), of course the answer has to be to lower costs even more wherever possible in order to return to profitability...
Re:United finds loose bolts on plug doors during 737 Max 9 i... by caycep on Tuesday January 09, 2024 @01:08PM (#38929574)
So should something as mission critical as an aircraft manufacturing co have some ownership/oversight that's not public shareholders? Give the NTSB a few seats on the board
Re:United finds loose bolts on plug doors during 737 Max 9 i... by euroderf on Tuesday January 09, 2024 @02:42PM (#38930927)
NTSB?? In American style management there's no room for namby-pamby "stakeholders" on the board.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by dotancohen on Tuesday January 09, 2024 @09:06PM (#38935247)
Who do you think the NTSB are?

The NTSB is staffed with people familiar with the industry - it has to be. Thus, a significant portion of these people are former Boeing employees. And historically, many NTSB staff have gone to work for Boeing (and other industry giants) after their stint at the NTSB as well. It's not that large of an industry after all. This is known as the Revolving Door.

Re:United finds loose bolts on plug doors during 737 Max 9 i... by markdown on Wednesday January 10, 2024 @04:05AM (#38937963)
> This is known as the Revolving Door.

Regulatory capture

Re:United finds loose bolts on plug doors during 737 Max 9 i... by kakwa_ on Tuesday January 09, 2024 @02:55AM (#38923537)
It's not necessarily a question of persons (and the CEO did a resigned after the Max crashes).

It's more a question of culture (oversimplifying, sales vs engineering) and this is harder to change most of the time. Apparently, even the Max debacle was not enough.

Re:United finds loose bolts on plug doors during 737 Max 9 i... by markdown on Tuesday January 09, 2024 @04:20AM (#38923981)
> and the CEO did a resigned after the Max crashes

That was a funny one. They replaced him with his chairman... hence, more of the same.

Re:United finds loose bolts on plug doors during 737 Max 9 i... by aredox on Tuesday January 09, 2024 @04:52AM (#38924217)
The MD "moles" managed to change the culture of Boeing pretty quickly from engineering- to sales-first. https://www.theatlantic.com/ideas/archive/2019/11/how-boeing... https://archive.ph/vy5p7
Re:United finds loose bolts on plug doors during 737 Max 9 i... by sushibowl on Tuesday January 09, 2024 @06:37AM (#38924940)
Some of these executive quotes read (admittedly with the benefit of hindsight) like satire.

> But the nearest Boeing commercial-airplane assembly facility would be 1,700 miles away. The isolation was deliberate. “When the headquarters is located in proximity to a principal business—as ours was in Seattle—the corporate center is inevitably drawn into day-to-day business operations,” Condit explained at the time.

Oh man, wouldn't want that to happen.

> With ethics now front and center, Condit was forced out and replaced with Stonecipher, who promptly affirmed: “When people say I changed the culture of Boeing, that was the intent, so that it’s run like a business rather than a great engineering firm.”

Indeed.

Re:United finds loose bolts on plug doors during 737 Max 9 i... by yencabulator on Tuesday January 09, 2024 @10:34AM (#38927297)
With a 63 million golden handshake for job well done, on top of the all the money he previously made.

https://www.imdb.com/title/tt11893274/

Re:United finds loose bolts on plug doors during 737 Max 9 i... by rvba on Tuesday January 09, 2024 @02:23AM (#38923364)
Looks like the installer did their job poorly and the QA rubber stamped it without checking. Are the QAs required to make photos to prove that they did their job? Like those food delivery people.

Alternative is wrong bolts, or sabotage.

But more possible - one lazy QA ghosting.

Re:United finds loose bolts on plug doors during 737 Max 9 i... by close04 on Tuesday January 09, 2024 @04:00AM (#38923874)
> one lazy QA ghosting

I'd say one criminal installer who stopped torqueing knowing/seeing that the bolt is not properly tightened, and an irresponsible QA who ignored their job knowing the bolt might not be properly tightened.

Re:United finds loose bolts on plug doors during 737 Max 9 i... by mywacaday on Tuesday January 09, 2024 @06:36AM (#38924931)
I would doubt one lazy QA, more likely a over worked and time short QA in a company culture that does not allow them to speak up when they need additional support.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by legacynl on Tuesday January 09, 2024 @07:12AM (#38925229)
Exactly. This is a failure of management.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by goku12 on Tuesday January 09, 2024 @07:49AM (#38925546)
They're finding problems on multiple aircrafts. This isn't one QA. In fact, forget QA missing this. Bolts on aerospace systems are supposed to be properly torqued and arrested in most cases. How do the assembly people make such big mistakes?

In my experience, no one puts their job on the line over silly reasons like this, unless there is intense pressure (unrealistic deadlines, heavy workload and poor working conditions) that makes mistakes like this inevitable. I wouldn't be surprised if an honest independent review of either company found ridiculous cost-cutting measures and/or emotional overload.

Re:United finds loose bolts on plug doors during 737 Max 9 i... by mikrotikker on Tuesday January 09, 2024 @07:22PM (#38934383)
Perhaps DEI hires that don't have to do their full duties because expecting them to is racist or transphobic or something stupid and they'll be protected by their manager who got shafted in his last performance review because he had too many "white males" on staff.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by goku12 on Wednesday January 10, 2024 @11:10AM (#38940131)
Do you have any reasonable justifications to base that speculation on, or are you just using this as an opportunity to target people racially or based on orientation? This sounds oddly similar to how Boeing tried to save their own skin by pinning the blame on foreign-trained foreign pilots when their own mismanagement in the form of 737 Max 8 MCAS killed hundreds of passengers.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by mikrotikker on Wednesday January 10, 2024 @02:18PM (#38942014)
I am extrapolating from the DEI stuff exposed by Ashley St Claire at United Airlines and I'm using this to target patronizing and dangerous DEI initiatives, not individuals.

Boeing should be held liable for hiring based on skin colour and orientation instead of merit, this risking lives.

Re:United finds loose bolts on plug doors during 737 Max 9 i... by goku12 on Wednesday January 10, 2024 @11:57PM (#38947827)
So you're 'extrapolating' an unrelated incident in a different company to target DEI initiatives at Boeing? If you remember the MCAS saga, you'll note that rot occurred at the exceedingly white executive level while the company was trying to pin the blame on foreign pilots. This is even supported by voice clips and email transcripts. Some of those were outright arrogant. It clearly shows a pattern consistent with profiteering work culture and nothing related to any race.

In fact, this is one pattern I've seen with such racist dog whistles - blame the marginalized groups and target DEI measures without any good justification to save the image of the privileged. It propagates the sinister implication that an employee is definitely bad if they are a DEI hire.

We're talking about a dangerous situation again with the potential to cause loss of life. It warrants serious contemplation as it might affect us some day. The fact that some people will hijack the discussion to advance their racist agenda is beyond disgusting.

Re:United finds loose bolts on plug doors during 737 Max 9 i... by mikrotikker on Friday January 12, 2024 @12:18AM (#38964179)
DEI is a racist agenda that endangers us all. It should be discarded for a merit based approach that ignores race, religion etc.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by goku12 on Friday January 12, 2024 @04:42AM (#38966028)
> DEI is a racist agenda that endangers us all.

The argument so far has shown how fallacious and unsubstantiated this claim is. The irony in this case is that the exact opposite applies.

> It should be discarded for a merit based approach that ignores race, religion etc.

This so called 'merit' is a distraction meant to hide 'privilege'. There is no merit unless privilege gap is addressed first. If you think DEI hiring counts as privilege, then you haven't seen or recognized systematic discrimination, racist mistreatment and outright kakistocracy. It's like a trained and well-armed soldier asking a farmer for a fair duel over who gets to keep the harvests- there is nothing fair about it.

My original reply had nothing do with race, but you managed to drag it into it for no good reason. The only reason I responded is because I didn't want to lend credence to such crude ideas with my silence. Unless you have any reasonable evidence to suggest that DEI hires are in any way responsible for these mishaps, I'm going to assume that have nothing more to say other than a one-sided diatribe against the challenge to your privileges.

Re:United finds loose bolts on plug doors during 737 Max 9 i... by mikrotikker on Friday January 12, 2024 @04:49PM (#38974601)
> The argument so far has shown how fallacious and unsubstantiated this claim is. The irony in this case is that the exact opposite applies.

Once you get out of the wacky humanities courses and into the real world this argument falls apart. Look at the aforementioned UA incident.

> This so called 'merit' is a distraction meant to hide 'privilege'

We'll have to agree to disagree on that one.

> My original reply had nothing do with race, but you managed to drag it into it for no good reason

Race is but one component of DEI and the easiest to reach for.

> I'm going to assume that have nothing more to say other than a one-sided diatribe against the challenge to your privileges.

Yes safe landings and safe air travel is a privilege and DEI is a challenge to that. What's more it is but a single industry where public safety and product quality is being sacrificed for the religious dogma of DEI. Its a funny coincidence DEI is Latin for god, but fitting none the less.

Re:United finds loose bolts on plug doors during 737 Max 9 i... by joquarky on Tuesday January 09, 2024 @04:54PM (#38932705)
Perhaps the installer and/or QA person should be required to be a passenger on the plane after their inspection and before they can mark the task complete.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by lvl102 on Tuesday January 09, 2024 @06:47AM (#38925008)
[REDACTED]
Re:United finds loose bolts on plug doors during 737 Max 9 i... by throwup238 on Tuesday January 09, 2024 @06:56AM (#38925080)
737 Max 9s are made in Renton, WA.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by giardini on Tuesday January 09, 2024 @03:50PM (#38931921)
Wby the rush to judgement ("The fish rots from the head."). What was done and not done will be traced and the causes determined with good old engineering and detective work. Responsibility will be revealed and the proper parties punished.

Rushing to judgement merely obscures the true responsibilities.

Re:United finds loose bolts on plug doors during 737 Max 9 i... by cyanydeez on Tuesday January 09, 2024 @05:42PM (#38933332)
the point is maintenance personnel might be directly signing off but that doesn't mean they're directly responsible if their management set unrealistic timetables. that's the point, systems are as accountable as individuals but often individuals are easier to indict and scapegoat.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by browningstreet on Wednesday January 10, 2024 @11:12AM (#38940154)
Given Boeing’s success in getting passes directly from Congress, that could be plausibly too rational given the current circumstances. Boeing got to where they are because your outcomes didn’t actually happen.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by whatever1 on Tuesday January 09, 2024 @03:17AM (#38923643)
Bolts can get unscrewed with vibrations. So probably a design error, they did not use the correct type of bolt (the one with the safety pin).
Re:United finds loose bolts on plug doors during 737 Max 9 i... by gregoriol on Tuesday January 09, 2024 @03:49AM (#38923820)
Don't they have many ways to prevent bolts from unscrewing? I know at least a few by doing mechanical stuff on motorcycles, and it seems that other planes don't have such problems (at least not within 2 months after the last inspection).
Re:United finds loose bolts on plug doors during 737 Max 9 i... by aredox on Tuesday January 09, 2024 @04:57AM (#38924254)
There are washers, or thread lock glue, but it is still a question of correct execution: has the glue been applied? Was the glue batch used before its shelf life? Were the parts degreased before glue application?

Or did anyone decided to cut corners by using an old batch/skipping degreasing/not putting glue because they were late on delivery?

Re:United finds loose bolts on plug doors during 737 Max 9 i... by MarkMarine on Tuesday January 09, 2024 @09:17AM (#38926425)
safety wire and cotter pins are preferred methods on aircraft.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by lobsterthief on Tuesday January 09, 2024 @12:55PM (#38929362)
Yes. For mission-critical bolts and nuts, absolutely safety wire and cotter pins should be used.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by MarkMarine on Tuesday January 09, 2024 @03:47PM (#38931878)
The engineers at Bell also thought that blind bolts you couldn’t inspect in dailies should be wired.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by somewhereoutth on Tuesday January 09, 2024 @05:57AM (#38924652)
My understanding is that the bolts did have castle nuts and retaining wires in the design. So either they were incorrectly fitted, or the bolts themselves were under specified with regard to strength.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by 0xbadc0de5 on Tuesday January 09, 2024 @08:23AM (#38925869)
The door hinge bolt had a castellated nut and pin, but the screws holding the hinge mount to the airframe apparently had no retaining wire. See leaked photo at: https://twitter.com/ByERussell/status/1744460136855294106/ph...
Re:United finds loose bolts on plug doors during 737 Max 9 i... by aziaziazi on Tuesday January 09, 2024 @06:46AM (#38925001)
Not sure what happened from “the design” to “the field”. The two loosen bolts in the picture are not castle nuts.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by stevehawk on Tuesday January 09, 2024 @06:37AM (#38924935)
ah. i've been wondering what the method of securing the bolts would have been and have not seen anyone mention it. torque values or threadlocker is rarely enough for the FAA. it's usually safety wire, castle nuts, lock washers, etc.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by MarkMarine on Tuesday January 09, 2024 @09:19AM (#38926440)
Those bolts aren’t drilled for safety wire.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by stjohnswarts on Tuesday January 09, 2024 @07:37AM (#38925429)
Did you torque every bolt every time before every flight?
Re:United finds loose bolts on plug doors during 737 Max 9 i... by defrost on Tuesday January 09, 2024 @09:02AM (#38926262)
Every scheduled maintainance that had that on the punch list, yes.

With a seperate follow through by another party to check the work.

That's SOP for US | AU | UK | EU military air mechanical crews.

Re:United finds loose bolts on plug doors during 737 Max 9 i... by MarkMarine on Tuesday January 09, 2024 @09:08AM (#38926322)
Every bolt you could see was checked before every flight yes. Every important bolt you couldn’t see during inspection was torqued, witnessed by QA, secured via safety wire or cotter pin, and secondary torque holding was then inspected by QA.

This thing is obviously not just an interior part, look at the meat in those castings, and it’s obviously safety critical, look at the cotter pins on other bolts. Sounds like it was going to be installed behind interior paneling and not inspected every day. For something like that, every important bolt should be secured by secondary methods, torqued and witnessed installed correctly. This looks like a failure in engineering (not having wire on this bolts), then a profound failure in assembly with multiple people not doing their jobs (not torquing, not witnessing, faking logs), risking the lives of passengers.

If this happened at cruising altitude and speed, people would have died. I can’t find the flight number but I believe 9 people died when a jet lost cabin pressure and a piece of the plane while decompressing during cruising altitude over water.

Re:United finds loose bolts on plug doors during 737 Max 9 i... by thebiss on Tuesday January 09, 2024 @11:32PM (#38936198)
Re:United finds loose bolts on plug doors during 737 Max 9 i... by DANmode on Tuesday January 09, 2024 @07:42AM (#38925484)
> signed their life on the line

Clearly this is hyperbole.

Re:United finds loose bolts on plug doors during 737 Max 9 i... by MarkMarine on Tuesday January 09, 2024 @08:56AM (#38926193)
It wasn’t in the military. Doing this would land you in Leavenworth.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by DANmode on Wednesday January 10, 2024 @02:39AM (#38937340)
What I mean is: clearly that's not the case in the civilian world.

Though it should be!

Re:United finds loose bolts on plug doors during 737 Max 9 i... by MarkMarine on Wednesday January 10, 2024 @12:37PM (#38941008)
I think if someone falsified records of witnessing torque on these bolts when they didn’t, they could easily be held criminally liable had someone died in this incident. I’m not a lawyer but my plain reading of involuntary manslaughter seems to fit this.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by storf45 on Tuesday January 09, 2024 @07:56AM (#38925631)
From when I worked as an engineer on the assembly line for smaller jets, know that there would be a record trail of exactly who completed the work, who signed off on it and what the work order steps were for anything related to these assemblies and components. This would include the work done at Boeing and their suppliers. Will be interesting to ultimately hear the root cause here.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by x86x87 on Tuesday January 09, 2024 @09:53AM (#38926847)
Let me ask this: assuming they did not tighten the bolts correctly and qa didn't check it, what are the odds they keep an accurate paper trail?
Re:United finds loose bolts on plug doors during 737 Max 9 i... by burnerthrow008 on Tuesday January 09, 2024 @12:16PM (#38928752)
Close to zero, but that doesn’t help them. If the paperwork was falsified to say that everything was tightened and verified, and Boeing stands behind that, now Boeing has to investigate and come up with a plan to prevent these bolts from “mysteriously loosening” (because everything was fine when it left the factory)… which will be an even bigger pain in the ass than just fixing the QA process.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by euroderf on Tuesday January 09, 2024 @02:44PM (#38930955)
Maybe bring in some QA professionals from... Airbus.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by x86x87 on Tuesday January 09, 2024 @02:58PM (#38931168)
I mean, if they are not doing it in good faith no matter what happens is going to be half assed.