Re:United finds loose bolts on plug doors during 737 Max 9 i...
by somewhereoutth on Tuesday January 09, 2024 @05:57AM
(#38924652)
My understanding is that the bolts did have castle nuts and retaining wires in the design. So either they were incorrectly fitted, or the bolts themselves were under specified with regard to strength.
[ Parent
| on HN ]
Re:United finds loose bolts on plug doors during 737 Max 9 i...
by 0xbadc0de5 on Tuesday January 09, 2024 @08:23AM
(#38925869)
The door hinge bolt had a castellated nut and pin, but the screws holding the hinge mount to the airframe apparently had no retaining wire. See leaked photo at: https://twitter.com/ByERussell/status/1744460136855294106/ph...
Re:United finds loose bolts on plug doors during 737 Max 9 i...
by aziaziazi on Tuesday January 09, 2024 @06:46AM
(#38925001)
Not sure what happened from “the design” to “the field”. The two loosen bolts in the picture are not castle nuts.
Re:United finds loose bolts on plug doors during 737 Max 9 i...
by stevehawk on Tuesday January 09, 2024 @06:37AM
(#38924935)
ah. i've been wondering what the method of securing the bolts would have been and have not seen anyone mention it. torque values or threadlocker is rarely enough for the FAA. it's usually safety wire, castle nuts, lock washers, etc.
Re:United finds loose bolts on plug doors during 737 Max 9 i...
by MarkMarine on Tuesday January 09, 2024 @09:19AM
(#38926440)
Those bolts aren’t drilled for safety wire.