News for hackers. Stuff that matters.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by whatever1 on Tuesday January 09, 2024 @03:17AM (#38923643)
Bolts can get unscrewed with vibrations. So probably a design error, they did not use the correct type of bolt (the one with the safety pin).
Re:United finds loose bolts on plug doors during 737 Max 9 i... by gregoriol on Tuesday January 09, 2024 @03:49AM (#38923820)
Don't they have many ways to prevent bolts from unscrewing? I know at least a few by doing mechanical stuff on motorcycles, and it seems that other planes don't have such problems (at least not within 2 months after the last inspection).
Re:United finds loose bolts on plug doors during 737 Max 9 i... by aredox on Tuesday January 09, 2024 @04:57AM (#38924254)
There are washers, or thread lock glue, but it is still a question of correct execution: has the glue been applied? Was the glue batch used before its shelf life? Were the parts degreased before glue application?

Or did anyone decided to cut corners by using an old batch/skipping degreasing/not putting glue because they were late on delivery?

Re:United finds loose bolts on plug doors during 737 Max 9 i... by MarkMarine on Tuesday January 09, 2024 @09:17AM (#38926425)
safety wire and cotter pins are preferred methods on aircraft.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by lobsterthief on Tuesday January 09, 2024 @12:55PM (#38929362)
Yes. For mission-critical bolts and nuts, absolutely safety wire and cotter pins should be used.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by MarkMarine on Tuesday January 09, 2024 @03:47PM (#38931878)
The engineers at Bell also thought that blind bolts you couldn’t inspect in dailies should be wired.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by somewhereoutth on Tuesday January 09, 2024 @05:57AM (#38924652)
My understanding is that the bolts did have castle nuts and retaining wires in the design. So either they were incorrectly fitted, or the bolts themselves were under specified with regard to strength.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by 0xbadc0de5 on Tuesday January 09, 2024 @08:23AM (#38925869)
The door hinge bolt had a castellated nut and pin, but the screws holding the hinge mount to the airframe apparently had no retaining wire. See leaked photo at: https://twitter.com/ByERussell/status/1744460136855294106/ph...
Re:United finds loose bolts on plug doors during 737 Max 9 i... by aziaziazi on Tuesday January 09, 2024 @06:46AM (#38925001)
Not sure what happened from “the design” to “the field”. The two loosen bolts in the picture are not castle nuts.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by stevehawk on Tuesday January 09, 2024 @06:37AM (#38924935)
ah. i've been wondering what the method of securing the bolts would have been and have not seen anyone mention it. torque values or threadlocker is rarely enough for the FAA. it's usually safety wire, castle nuts, lock washers, etc.
Re:United finds loose bolts on plug doors during 737 Max 9 i... by MarkMarine on Tuesday January 09, 2024 @09:19AM (#38926440)
Those bolts aren’t drilled for safety wire.