I think this is a good argument for reducing your dependency count as much as possible, and keeping them to well-known and trustworthy (security-wise) creators.
"Not-invented-here" syndrome is counterproductive if you can trust all authors, but in an uncontrolled or unaudited ecosystem it's actually pretty sensible.
Just because dependencies do a lot more than you need, doesn't mean you should automatically reach for the smallest dependency that fits your needs.
If you need 5 of the dozens of Lodash functions, for instance, it might be best to just install Lodash and let your build step shake out any unused code, rather than importing 5 new dependencies, each with far fewer eyes and release-management best practices than the Lodash maintainers have.
Whether to take a dependency is a tricky thing that really comes down to engineering judgement- the thing that you (the developer) are paid to make the calls on.
It’s not even a judgement call at this point. It’s more aligned with buckling your seatbelt, pointing your car off the road, closing your eyes, flooring it and hoping for a happy ending.
Or At the time of adding you can add a NOTE or FIXME comment stating where you copied it from. A quick grep for such keyword can give you a nice overview of nice to have stuff. You can also add a ticket with all the details if you're using a project management tool and resuscitate it when that hypothetical moment happens.
But again, if the discussion is going to be that specific, then you would need to provide actual examples, so that we could judge, whether we would implement that ourselves or it would be difficult to do so. Note, that often it is also not required for ones use-case, to have a 100% matching behavior either. The goal is not to duplicate lodash. The purpose of the extracted or reimplemented function would still be ones own project, where the job of that function might be much more limited.
https://github.com/lodash/lodash/blob/main/dist/lodash.js#L7...
So you also need to copy isArrayLikeObject, baseDifference and baseFlatten.
For baseDifference, you also need to copy arrayMap and baseUnary.
For baseFlatten, you also need to copy arrayPush.
For isArrayLikeObject, you also need to copy isArrayLike and isObjectLike.
For isArrayLike, you also need to copy isLength and isFunction.
For isFunction, you also need to copy isObject and baseGetTag.
For baseGetTag, you also need to copy getRawTag and objectToString.
I don’t have time to dig any deeper, just use tree-shaking ffs.
Tree shaking however, will not help you, if you have to first install a library using NPM. It will only help you reduce overhead in the code served to a browser. Malicious code can run much earlier, and would be avoided, if you rewrite or extract relevant code from a library, avoiding to install the library using NPM. Or is there some pre-installation tree shaking, that I am unaware of? That would actually be interesting.
npm install stdlib
…but double checked before and @stdlib/stdlib has 58 dependencies, so the joke preempted me.If you’re gonna reimplement only thr code you need from a dependency, it’s hard to know of the stuff you’re leaving out how much is just extra stuff you don’t need and how much might be security fixes that may not be apparent to you but the dependency by virtue of being worked upon and used by many people has fixed.
In both cases, the solution is similar: try to restrict access to vital systems only to those you trust,so that you have less need to audit their every move.
Your system administrators can access the server room, but the on-site barista can't. Your HTTP server is trusted enough to run in prod, but a color-formatting library isn't.
Your employees are carefully vetted before hiring. You've got their names, addresses, and social security numbers. There's someone you're able to hold accountable if they steal from you or start breaking everything in the office.
This seems more like having several random contractors who you've never met coming into your business in the middle of night. Contractors that were hired by multiple anonymous agencies you just found online somewhere with company names like gkz00d or 420_C0der69 who you've also never even spoken to and who have made it clear that they can't be held accountable for anything bad that happens. Agencies that routinely swap workers into or out of various roles at your company without asking or telling you, so you don't have any idea who the person working in the office is, what they're doing, or even if they're supposed to be there.
"To make thing easier for us we want your stuff to require the use of a bunch of code (much of which does things you don't even need) that we haven't bothered looking at because that'd be too much work for us. Oh, and third parties we have no relationship with control a whole bunch of that code which means it can be changed at any moment introducing bugs and security issues we might not hear about for months/years" seems like it should be a hard sell to a boss or a client, but it's sadly the norm.
Assuming that something is going to go wrong and trying to limit the inevitable damage is smart, but limiting the amount of untrustworthy code maintained by the whims of random strangers is even better. Especially when the reasons for including something that carries so much risk is to add something trivial or something you could have just written yourself in the first place.
Sounds very similar to how global SIs staff enterprise IT contracts.
You only need to rewrite what you use, which for many (probably most) libraries will be 1% or less of it
Another 20% or more is https://pypi.org/project/requests/ and its dependencies — this is an extremely popular project despite that the standard library already provides the ability to make HTTPS connections (people just hate the API that much). One of requests' dependencies is certifi, which is basically just a .pem file in Python package form. The vendored requests has not seen any tree-shaking as far as I can tell.
This sort of thing is a big part of why I'll be able to make PAPER much smaller.
No need to. But also no need to pull in a dependency that could be just a few lines of own (LLM generated) code.
... and now you've switched the attack vector to a hostile LLM.
A few lines of code can be audited.
Creating two problems, where there was one.
When you code in a high-security environment, where bad code can cost the company millions of dollars in fines, somehow you find a way.
The sibling commenter is correct. You write what you can. You only import from trusted, vetted sources.
a lor of these dependencies are higher order function definitions, which never change, and could be copy/pasted around just fine. they're never gonna change
There is no need to rewrite dependencies. Sometimes it just so happens that a project can live without outputting fancy colorful text to stdout, or doesn't need to spread transitive dependencies on debug utilities. Perhaps these concerns should be a part of the standard library, perhaps these concerns are useless.
And don't get me started on bullshit polyfill packages. That's an attack vector waiting to be exploited.
I always tried to keep the dependencies to a minimum.
Another thing you can do is lock versions to a year ago (this is what linux distros do) and wait for multiple audits of something, or lack of reports in the wild, before updating.
(Big fan of version pinning in basically every context, too)
This is an eco system that has taken code reuse to the (unreasonable) extreme.
When JS was becoming popular, I’m pretty sure every dev cocked an eyebrow at the dependency system and wondered how it’d be attacked.
Not even that actually. Actually the wheel is reinvented over and over again in this exact ecosystem. Many packages are low quality, and not even suitable to be reused much.
There's also the flavor of frontend developer that came from the backend and sneers at actually having to learn frontend because "it's not real development"
What kind of code does this developer write?
The customer “ooh”s and “aah”s at said fancy animations running on the salesman’s top of the line macbook pro and is lured in, only realising too late that they’ve been bitten in the ass by the enormous amount of bloat that makes it run like a potato on any computer that costs less than four thousand dollars.
And US/EU laws are written by clueless bureaucrats whose most recent experience with technology is not even an electric typewriter.
What’s your point?
We "in the know" might agree, but we're not going to get it sold.
We once had the rule HTML should be purely semantic and all styling should be in CSS. It was brilliant, even though not everything looked as fancy as today.
https://www.w3.org/WAI/WCAG22/Techniques/#client-side-script
Also, when was that semantic HTML rule? You make it sound like ancient history, but semantic HTML has only been a thing since HTML5 (2008).
If you're using HTML/CSS sensibly then it's accessible from the get-go by dint of the browser being accessible.
> Also, when was that semantic HTML rule? You make it sound like ancient history, but semantic HTML has only been a thing since HTML5 (2008).
HTML5 added a million new tags, but HTML4 had plenty of semantic tags that people regularly ignored and replaced with <div>, for example <p>, <em>, <blockquote>...
For ca. ten years, the advice was to pointlessly "replace <i> with <em> and <b> with <strong>" and it utterly screwed over most new web developers' understanding of semantic tags. There are many reasons to use italics (and they vary between languages) but "emphasis" is just one of them, and none of the others ever materialized as tags.
It would have been far better to have recommended <i class="emphasis"> and <i class="media-title"> and <i class="snarky-aside"> etc. than to have added the <em> tag and said "just use it instead of <i>".
That is straight up untrue. Some ARIA patterns require developers to implement focus management and keyboard access from scratch.
For example, ”Correct implementation of the tree role requires implementation of complex functionality that is not needed for typical site navigation that is styled to look like a tree with expandable sections.”
But sometimes you do need that kind of widget for something else.
Or are you talking about a situation where the developer has implemented a custom component (aka "done something") which doesn't use the native focus system and therefore requires additional work to make accessible?
The native focus system typically works just fine, but JS is needed for keyboard interactions and to set things like aria-activedescendant.
I'm not saying the ideal frontend dev writes no JS. I'm saying they write as little as possible. Some times you need JS, nothing wrong with that. The vast majority of the time you don't. And if you do I'd say it's a self-imposed requirement (or a direct/indirect result of a self imposed requirement) most of the time.
For me as a mostly backend dev, this was actually quite easy to achieve. Tiny modification of the backend API, some work in the frontend using JS to remove hints that should not show when JS is running, and voila, it works. Of course my pages are very simple in nature, but the same principles can be applied to larger pages. One could even link/direct to different pages, depending on the user running JS or not, and then have a workflow without JS and one with JS. It is all possible and only a matter of wanting to make an effort. Of course, modern JS frameworks do not really encourage this kind of design. Though server side rendering becomes more popular these days, I don't think we are quite there yet.
A page that is blank when not running JS has exactly zero accessibility.
The designer, in my experience, is totally fine with just using a normal select element, they don't demand that I reinvent the drop-down with divs just to put rounded corners on the options.
Nobody cares about that stuff. These are minor details, we can change it later if someone really wants it. As long as we're not just sitting on our hands for lack of work I'm not putting effort into reinventing things the browser has already solved.
But the middle management might actually praise the developer, because they "get the job done" with the minimal effort (so "efficient"!).
Let me assure you, devs were skeptical about all this well before AI.
A lot of the culture is built by certain people who make a living out of package maximalism.
More packages == more eyballs == more donations.
They have an agenda that small packages are good and made PRs into popular packages to inject their junk into the supply chain.
NPM is good for building your own stack but it's a bad idea (usually) to download the Internet. No dep system is 100% safe (including AI, generating new security vulns yay).
I'd like to think that we'll all stop grabbing code we don't understand and thrusting it into places we don't belong, or at least, do it more slowly, however, I also don't have much faith in the average (especially frontend web) dev. They are often the same idiots doing XYZ in the street.
I predict more hilarious (scary even) kerfuffles, probably even major militaries losing control of things ala Terminator style.
In fact, when we did have Java in the browser it was loaded with security issues primarily because of the much greater complexity of the Java language.
The issue here is not Java or it's complexity. The point is also not Java, it's incidental that it was popular at the time. It's people acting irrationally about things and jumping ship for an even-worse system.
Like, yes, if that really were the whole attack surface of JS, sure nobody would care. They also wouldn't use it...and nothing we cared about would use it either...
Anyways, I think you are missing the forest for the trees if you think this is a Java vs JavaScript comparison, don't worry it's also possible to produce junk enterprise code too...
Just amusing watching people be irrationally scared of one language/ecosystem vs another without stopping to think why or where the problems are coming from.
But the reason Java is more secure than JavaScript in the context of supply chain attacks is fourfold:
1. Maven packages don't have install scripts. "Installing" a package from a Maven repository just means downloading it to a local cache, and that's it.
2. Java code is loaded lazily on demand, class at a time. Even adding classes to a JAR doesn't guarantee they'll run.
3. Java uses fewer, larger, more curated libraries in which upgrades are a more manual affair involving reading the release notes and the like. This does have its downsides: apps can ship with old libraries that have unfixed bugs. Corporate users tend to have scanners looking for such problems. But it also has an upside, in that pushing bad code doesn't immediately affect anything and there's plenty of time for the author to notice.
4. Corporate Java users often run internal mirrors of Maven rather than having every developer fetch from upstream.
The gap isn't huge: Java frameworks sometimes come with build system plugins that could inject malware as they compile the code, and of course if you can modify a JAR you can always inject code into a class that's very likely to be used on any reasonable codepath.
But for all the ragging people like to do on Java security, it was ahead of its time. A reasonable fix for these kind of supply chain attacks looks a lot like the SecurityManager! The SecurityManager didn't get enough adoption to justify its maintenance costs and was removed, partly because of those factors above that mean supply chain attacks haven't had a significant impact on the JVM ecosystem yet, and partly due to its complexity.
It's not clear yet what securing the supply chain in the Java world will look like. In-process sandboxing might come back or it might be better to adopt a Chrome-style microservice architecture; GraalVM has got a coarser-grained form of sandboxing that supports both in-process and out-of-process isolation already. I wrote about the tradeoffs involved in different approaches here:
https://blog.plan99.net/why-not-capability-languages-a8e6cbd...
[1] https://medium.com/graalvm/writing-truly-memory-safe-jit-com...
Yes, I remember thinking at the time "how are people not ashamed to install this?"
The true threat here isn't the immediate dependency though, it's the recursive supply chain of dependencies. "trustworthy" doesn't make any sese either when the root cause is almost always someone trustworthy getting phished. Finally if I'm not capable of auditing the dependencies it's unlikely I can replace them with my own code. That's like telling a vibe coder the solution to their brittle creations is to not use AI and write the code themselves.
In both cases, actually doing the work and writing a function instead of adding a dependency or asking an AI to write it for you will probably make you a better coder and one who is better able to audit code you want to blindly trust in the future.
It's still neither realistic nor helpful advice.
I wonder to which extent is the extreme dependency count a symptom of a standard library that is too minimalistic for the ecosystem's needs.
Perhaps this issue could be addressed by a "version set" approach to bundling stable npm packages.
If they are not, something is bad and the dependency should be "reduced" if at all possible.
I do wish there were some lists of compromised versions, that package managers could disallow from.
Measures like this also aren't meant to be "final solutions" either, but stop-gaps. Slowing the spread can still be helpful when a large scale attack like this does occur. But I'm also not entirely sure how much that weighs against potentially slowing the discovery as well.
Ultimately this is still a repository problem and not a package manager one. These are merely band-aids. The responsibility lies with npm (the repository) to implement proper solutions here.
> The responsibility lies with
And I agree that if everyone did this, it would slow down finding issues in new releases. Not really sure what to say to that... aside from the selfish idea that if I do it, but most other people don't, it won't affect me.
It would not solve for a bad actor gaining trust over years, then contributing seemingly innocent code that contains an exploitable bug with enough plausible deniability to remain on the team after it is patched.
To clarify - I dont think it is naive to assume the software is as-is with all responsibilities on the user since that is exactly what lawyers have made all software companies say that for over 50 years.
How can we promise to "do better" when shit like "no author or distributor accepts responsibility to anyone for the consequences of using it or for whether it serves any particular purpose or works at all" is in the legal agreement of the software you are using?
Making someone agree to that while simultaneously on the side making promises that the software works is used car salesman gimmicks. The only things that matters is what you put in writing.
One way or another that will end.
Free Software will have the same responsibilities. If you write software, negligently, and it causes damage, you will be liable
I should not be able to make a Crypto wallet that is easy to hack and distribute it without consequence
This will be a very good thing
We know how to make secure 4eliable software (some of us) but nobody will pay for it
I acknowledge that it is my responsibility to drive safely, and I take that responsibility seriously. But I still wear a seat belt and carry auto insurance.
I don't think this is a particularly unreasonable take; I'm a relative novice to the JS ecosystem, and I don't feel this uncomfortable taking on dependencies as I do in pretty much any other ecosystem I participate in, even those (like Rust) where the dependency counts can be high.
It's best to never use `^` and always specify exact version, but many maintainers apparently can't be bothered with updating their dependencies themselves so it became the default.
> In most cases, such attacks are discovered quickly and the malicious versions are removed from the registry within an hour.
By delaying the infected package availability (by "aging" dependencies), we're only delaying the time, and reducing samples, until it's detected. Infections that lay dormant are even more dangerous than explosives ones.
The only benefit would be if, during this freeze, repository maintainers were successfully pruning malware before it hits the fan, and the freeze would give scanners more time to finish their verification pipelines. That's not happening afaik, NPM is crazy fast going from `npm publish` to worldwide availability, scanning is insufficient by many standards.
From what I can tell, even a few hours of delay for actually pulling dependencies post-publication to give security tools a chance to find it would have stopped all (?) recent attacks in their tracks.
It is insane to me how many developers update dependencies in a project regularly. You should almost never be updating dependencies, when you do it should be because it fixes a bug (including a security issue) that you have in your project, or a new feature that you need to use.
The only time this philosophy has bitten me was in an older project where I had to convince a PM who built some node project on their machine that the vulnerability warnings were not actually issues that affected our project.
Edit: because I don't want to reply to three things with the same comment - what are you using for dependencies where a) you require frequent updates and b) those updates are really hard?
Like for example, I've avoided updating node dependencies that have "vulnerabilities" because I know the vuln doesn't affect me. Rarely do I need to update to support new features because the dependency I pick has the features I need when I choose to use it (and if it only supports partial usage, you write it yourself!). If I see that a dependency frequently has bugs or breakages across updates then I stop using it, or freeze my usage of it.
That one is a funny example in this context. If you were drifting far behind on updates, so far that you were still on the obsolete log4j 1.x, you were immune to that vulnerability (log4shell). That obsolete log4j version had other known vulnerabilities, but most of them on rarely used optional components, and none of them affected basic uses of it to log to the console or disk. And even better, there were so many people using that obsolete log4j version, that a binary compatible fork quickly appeared (reload4j) which just removes the vulnerable components (and fixes everything that wasn't removed); it takes 10 minutes to update to it, or at worst 1 hour if you have to tweak your dependencies to exclude the log4j artifact.
(And then it happened again, this time with Spring (spring4shell): if you were far behind on updates, so far that you were still on the very old but still somewhat supported Java 8, you were immune to that vulnerability.)
In NPM world, there's so much churn that it would be comical if not for the security aspects.
Otherwise, I agree with the sentiment that too many people try to update the world too often. Keeping up with runtime updates as often as possible (node.js is more trusted than any given NPM module) and updating only when dependencies are no longer compatible is a better middle ground.
There really is no good solution other than to reduce the surface area for vulnerabilities by reducing the total amount of code you depend on (including third-party code). In practice, this means using as few dependencies as possible. If you only use one or two functions from lodash or some other helper library, you're probably better off writing or pulling in those functions directly instead.
This has bitten me so many times (usually at large orgs where policy is to be conservative about upgrades) that I can't even consider not upgrading all my dependencies at least once a quarter.
Criticism: "You should shower every day"
Defense: "OH, maybe I should shower every hour, to the point where my skin dries and I can't get my work done because I'm in the shower all day."
No, there's a pretty standard way of doing things that you can care to learn, and it's very feasible, people shower every day during the week, sometimes they skip if they don't go out during weekends, if it's very cold you can skip a day, and if it's hot you can even shower twice. You don't even need to wash your hair every day. There's nuance that you can learn if you stop being so defeatist about it.
Similarly, you can of course install stripe-js since it's vendored from a paid provider with no incentive to fuck you with malware and with resources to audit dependency code, at any rate they are already a dependency of yours, so adding an npm package does not add a vendor to your risk profile.
Similarly you can add react-hook-form if it's an official react package, however if it isn't, then it's a risk, investigate who uploads it, if it's a random from github with an anime girl or furry image in their profile, maybe not. Especially if the package is something like an unofficial react-mcp-dotenv thing where it has access to critical secrets.
Another fallacy is that you have to rewrite the whole dependency you would otherwise import. False. You are not going to write a generic solution for all use cases, just for your own, and it will be tightly integrated and of higher quality and less space (which helps with bandwidth, memory and CPU caching), because of it. For god's sake, you used an example relating to forms? We've had forms since the dot com boom, how come you are still having trouble with those? You should know them like the back of your hand.
Example:
Argument: People should be able to build whatever they want on their own property.
Reductio ad Absurdum position: I propose to build the world's largest Jenga tower next to your house.
Note that this does not take into account any counter arguments such as 'if it falls on me you will still be liable for negligence', but it makes a point without violating the logic of the original argument. To violate that logic would indeed be a straw man.
This is very dead internet theory, but not automated, someone copied my comment, gave it to chatgpt, and returned the chatgpt answer, presumably passing it off as their own, but in effect we are talking with chatgpt lol.
But I think for untrusted third party code, it's much better to copy the code by hand, that way you are really forced to audit it. There really isn't much of an advantage to copying an install.sh script compared to just downloading a running the .sh, whereas writing the actual .sh commands on the command line (and following any other URLs before executing them) is golden.
https://docs.renovatebot.com/configuration-options/#minimumr...
https://docs.renovatebot.com/presets-default/#enablevulnerab...
Depending on a commercial service is out of the question for most open source projects.
agpl is a no go for companies not intending to ever contribute anything back. good riddance.
It's common among grizzled software engineering veterans to say "Check in the source code to all of your dependencies, and treat it as if it were your own source code." When you do that, version upgrades are actual projects. There's a full audit trail of who did what. Every build is reproducible. You have full visibility into all code that goes into your binary, and you can run any security or code maintenance tools on all of it. You control when upgrades happen, so you don't have a critical dependency break your upcoming project.
For Python's uv, you can do something like:
> uv lock --exclude-newer $(date --iso -d "2 days ago")
Perhaps I’m just ignorant of web development, but why not? We do so with our desktop software.
The problem with this approach is you need a certain number of guinea pigs on the bleeding edge or the outcome is the same (just delayed). There is no way for anyone involved to ensure that balance is maintained. Reducing your surface area is a much more effective strategy.
The signal desktop app is an electron app. Presumably it has the same problem.
Does anyone know of any reasonable approaches to using npm securely?
“Reduce your transitive dependencies” is not a reasonable suggestion. It’s similar to “rewrite all the Linux kernel modules you need from scratch” or “go write a web browser”.
I would love to have something like that "in the open"…
Oh please, do not compare writing bunch of utilities for you "app" with writing a web browser.
Use NPM Package Cooldown Check
The NPM Cooldown check automatically fails a pull request if it introduces an npm package version that was released within the organization’s configured cooldown period (default: 2 days). Once the cooldown period has passed, the check will clear automatically with no action required. The rationale is simple - most supply chain attacks are detected within the first 24 hours of a malicious package release, and the projects that get compromised are often the ones that rushed to adopt the version immediately. By introducing a short waiting period before allowing new dependencies, teams can reduce their exposure to fresh attacks while still keeping their dependencies up to date.
Having secrets in a different security context, like root/secretsuser-owned secret files only accessible by the user for certain actions (the simplest way would be eg. sudoers file white listing a precise command like git push), which would prevent arbitrary reads of secrets.
The other part of this attack, creating new github actions, is also a privilege, normal users dont need to exercise that often or unconstrained. There are certainly ways to prevent/restrict that too.
All this "was a supply chain attack" fuzz here is IMO missing the forest for the trees. Changing the security context for these two actions is easier to implement than supply chain analysis and this basic approach is more reliable than trusting the community to find a backdoor before you apply the update. Its security 101. Sure, there are post-install scripts that can attack the system but that is a whole different game.
You can do it:
https://github.blog/changelog/2025-07-01-dependabot-supports...
https://docs.renovatebot.com/configuration-options/#minimumr...
https://www.stepsecurity.io/blog/introducing-the-npm-package...
And larger dependencies that can be trusted in larger blocks. I'll bet half of a given projects dependencies are there to "gain experience with" or be able to name drop that you've used them.
Less is More.
We used to believe that. And then W3C happened.
You can do this with npm (since version 6.9.0).
To only get registry deps that are over a week old:
$ npm install --before="$(date -v -7d)"
Source: Darcy Clarke - https://bsky.app/profile/darcyclarke.me/post/3lyxir2yu6k2sThat's the secret lots of enterprises have relied on for ages. Don't be bleeding edge, let the rest of the world gineau pig the updates and listen for them to sound the alarm if something's wrong. Obviously you do still need to pay attention to the occasional, major, hot security issues and deal with them in a swift fashion.
Another good practice is to control when your updates occur - time them when it's ok to break things and your team has the bandwidth to fix things.
This is why I laughed hard when Microsoft moved to aggressively push Windows updates and the inevitable borking it did to people's computers at the worst possible times ("What's that you said? You've got a multi-million dollar deliverable pitch tomorrow and your computer won't start due to a broken graphics driver update?). At least now there's a "delay" option similar to what you described, but it still riles me that update descriptions are opaque (so you can't selectively manage risk) and you don't really have the degree of control you ought to.
I think Github's Dependabot can help you here. You can also host your own little instance of DependencyTrack and keep up to date with vulnerabilities.
There are no real solutions to the problem, except for reducing exposure somewhat by limiting yourself to a mostly frozen subset of packages that are hopefully vetted more stringently by more people.
THEN use artifactory on top of that.
That's boring and slow though. Whatever I want my packages and I want them now. Apart of the issue is the whole industry is built upon goodwill and hope.
Some 19 year old hacked together a new front end framework last week, better use it in prod because why not.
Occasionally I want to turn off my brain and just buy some shoes. The Timberland website made that nearly impossible last week. When I gave up on logging in for free shipping and just paid full price, I get an email a few days later saying they ran out of shoes.
Alright. I guess Amazon is dominant for a reason.
Standard libraries should include everything needed to interact with modern systems. This means HTTP parsing, HTTP requests, and JSON parsing. Some laguages are excellent (like python), while some are half way there (like go), and some are just broken (Rust).
External libraries are for niche or specialized functionality. External libraries are not for functionality that is used by most modern software. To put your head in the ground and insist otherwise is madness and will lead to ridiculous outcomes like this.
Where do you draw the line though? It seems like you mostly spend your time writing HTTP servers reading/writing JSON, but is that what everyone else also spends their time doing? You'll end up with a standard library weighing GBs, just because "most developers write HTTP servers", which doesn't sound like a better solution.
I'm willing to stick my head the other way, and say I think the languages today are too large. Instead, they should have a smaller core, and the language designed in a way that you can extend the language via libraries. Basically more languages should be inspired by Lisps and everything should be a library.
If you have a well vetted base library, that is frequently reviewed, under goes regular security and quality checks, then you should be minimally concerned about the quality of code that goes on top.
In a well designed language, you can still export just what you need, or even replace parts of that standard library if you so choose.
This approach even handles your question: as use cases become more common, an active, invested* community (either paying or actively contributing) can add and vet modules, or remove old ones that no longer serve an active purpose.
But as soon as you find yourself "downloading the web" to get stuff done, something has probably gone horribly wrong.
That's exactly npm's problem, though. What everybody is avoiding to say is that you need a concept of "trusted vendors". And, for the "OSS accelerates me" business crowd, that means paying for the stuff you use.
But who would want that when you're busy chasing "market fit".
I don't think that's the problem with npm. The problem with npm is that no packages are signed, at all, so it ends up trivial for hackers to push new package versions, which they obviously shouldn't be able to do.
That is, how does signing prevent publishing of malware, exactly?
Yeah, of course. Also if they hosted their private key for the signature on their public blog, anyone could use it for publishing.
But for the sake of the argument, why don't we assume people are correctly using the thing we're talking about?
So, databases? Which then begs the question, which - Postgres, MySQL, SQLite, MS SQL, etc.? And some NoSQL, because modern systems might need it.
That basically means you need to pull in everything and the kitchen sink. And freeze it in time (because of backwards compatibility). HTML, HTTP parsing, and SHA1024 are perfectly reasonable now; wait two decades, and they might be as antiquated as XML.
So what your language designers end up, is having to work on XML parsing, HTTP, JSON libraries rather than designing a language.
If JS way is madness, having everything available is another form of madness.
Granted some (JDBC) more useful than the others. Although JDBC is more of an API and less of a library.
As for XML, JAXP was a common way to deal with it. Yes, there’s Xstream etc, but it doesn’t mean any of standard XML APIs are obsolete.
This is great when the stdlib is well-designed and kept current when new standards and so on become available, but often "batteries included" approaches fail to cover all needs adequately, are slow to adopt new standards or introduce poorly designed modules that then cannot be easily changed, and/or fail to keep up-to-date with the evolution of the language.
I think the best approach is to have a stdlib of a size that can be adequately maintained/improved, then bless a number of externally developed libraries (maybe even making them available in some official "community" module or something with weaker stability guarantees than the stdlib).
I find it a bit funny that you specifically say HTTP handling and JSON are the elements required when that's only a small subset of things needed for modern systems. For instance, cryptography is something that's frequently required, and built-in modules for it often suck and are just ignored in favor of external libraries.
EDIT: actually, I think my biggest issue with what you've said is that you're comparing Python, Go, and Rust. These languages all have vastly different design considerations. In a language like Python, you basically want to be able to just bash together some code quickly that can get things working. While I might dislike it, a "batteries included" approach makes sense here. Go is somewhat similar since it's designed to take someone from no knowledge of the language to productive quickly. Including a lot in the stdlib makes sense here since it's easier to find stuff that way. While Rust can be used like Python and Go, that's not really its main purpose. It's really meant as an alternative to C++ and the various niches C/C++ have dominated for years. In a language like that, where performance is often key, I'd rather have a higher quality external library than just something shoved into the stdlib.
Really, good stdlib still allows you to use better suited 3rd party libraries. Lack of good stdlib doesn't add anything.
If you want an actual solution, look for differences. If you somehow end up figuring out its about type of people using those, then there is no easy technical solution.
> Standard libraries should include everything needed to interact with modern systems. This means HTTP parsing, HTTP requests, and JSON parsing.
There is another way. Why not make the standard library itself pluggable? Rust has a standard library and a core library. The standard library is optional, especially for bare-metal targets.
Make the core library as light as possible, with just enough functionality to implement other libraries, including the interfaces/shims for absolutely necessary modules like allocators and basic data structures like vectors, hashmaps, etc. Then move all other stuff into the standard library. The official standard library can be minimal like the Rust standard library is now. However, we should be able to replace the official standard library with a 3rd party standard library of choice. (What I mean by standard library here is the 'base library', not the official library.) Third party standard library can be as light or as comprehensive as you might want. That also will make auditing the default codebase possible.
I don't know how realistic this is, but something similar is already there in Rust. While Rust has language features that support async programming, the actual implementation is in an external runtime like Tokio or smol. The clever bit here is that the other third party async libraries don't enforce or restrict your choice of the async runtime. The application developer can still choose whatever async runtime they want. Similarly, the 3rd party standard library must not restrict the choice of standard libraries. That means adding some interfaces in the core, as mentioned earlier.
It works well, but the downside of that approach is people complaining about how abstract things are.
Meanwhile, the public API of the selected standard library need not be abstract at all. Let's say that the bare minimum functionality expected from a 3rd party standard library is the same as the official standard library. They can just reimplement the official standard library at the minimum.
Doing it the right way would create friction, developers might need to actually understand what the code is doing rather than pulling in random libraries.
Try explaining to your CTO that development will slow down to verify the entire dependency chain.
I'm more thinking C# or Java. If Microsoft or Oracle is providing a library you can hope it's safe.
You *could* have a development ecosystem called Safe C# which only comes with vetted libraries and doesn't allow anything else.
I'm sure other solutions already exist though.
This is a standard practice in most places I have worked, CI/CD only allowed to use internal repos, and libraries are only added after clearance.
There are also tools that break CI/CD based on CVE reports from existing dependencies.
Then let's add friction. Developers understanding code is what they should be doing.
CTOs understand the high cost of ransomware and disruption of service.
Is java.util.logging.Logger not that great?
Sure, yet everyone that used it had a good night rest when Log4J exploit came to be.
The thing is, you don't have to be this undiscerning to end up with tons of packages.
Let's init a default next.js project. How many dependencies are there?
react, react-dom, next, typescript, @types/node, @types/react, @types/react-dom.
OK so 7... seems like a lot in some sense but its still missing many reasonable dependencies. Some sort of styling solution (tailwind, styled components, etc). Some sort of http client or graphql. And more. But lets just use the base dependencies as an example. Is 7 so bad? Maybe, maybe not, but you need to go deeper. How many packages are there?
55. What are they? I have no idea, go read the lock file I guess.
All of this while being pretty reasonable.
Security: we put the ‘no’ in ‘innovation’.
I was shocked when I found out that at some of the most profitable shops, most of their code is just a bunch of different third-party libraries badly cobbled together, with only a superficial understanding of how those libraries work.
This explains a lot. Really, this is the great reason of why the society is collapsing as we speak.
"There should be no DRM in phones" - "You Are An Obstruction To Making Profit".
"People should own their devices, we must not disallow custom software on it" - "YAAOTMP"
"sir, the application will weigh 2G and do almost nothing yet, should we minify it or use different framework?" - "YAAOTMP".
"Madame, this product will cost too much and require unnecessary payments" - "YAAOTMP"
Etc. etc. Like in this "Silicon Valley" comedy series. But for real, and affecting us greatly.
I could just be projecting my own bad experiences with "security" folks (in quotes as I can't speak to their qualifications). My other big gripe is when they don't recongnize UX as a vital part of security (if their solution is unsuable, it won't be used).
Essentials tools such as Jest add 300 packages on their own.
You already have hundreds to thousands of packages installed, fretting over a few more for that DatePicker or something is pretty much a waste of time.
Even more weird in the EU where things like Cyber Resilience Act mandate patching publicly known vulnerabilities. Cool, so let's just stay up2date? Supply-chain vuln goes Brrrrrr
You need an EDR and code repo scanner. Exploring this as a technical problem of the infrastructure will accomplish. The people that create these systems are long gone and had/have huge gaps in their capabilities to stop creating these problems.
For example, whenever a new version of a package is released, it's published to the repository but not allowed to be installed for at least 48 hours, and this gives time to any third-party observers to detect a malware early.
One thing I was thinking of was sort of a "delayed" mode to updating my own dependencies. The idea is that when I want to update my dependencies, instead of updating to the absolute latest version available of everything, it updates to versions that were released no more than some configurable amount of time ago. As a maintainer, I could decide that a package that's been out in the wild for at least 6 weeks is less likely to have unnoticed malware in it than one that was released just yesterday.
Obviously this is not a perfect fix, as there's no guarantee that the delay time I specify is enough for any particular package. And I'd want the tool to present me with options sometimes: e.g. if my current version of a dep has a vulnerability, and the fix for it came out a few days ago, I might choose to update to it (better eliminate the known vulnerability than refuse to update for fear of an unknown one) rather than wait until it's older than my threshold.