News for hackers. Stuff that matters.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by nomel on Monday July 21, 2025 @04:57PM (#44640329)
I work in manufacturing in the US. Incoming quality control, for Chinese vendors, is necessarily set up with zero-trust. This isn't a "trust but verify" sort of thing, it's strictly "do not trust". Assume that, at every step of the chain, there will be a lie: change of process, material change, collected data, and that the product being given to you is even yours (delivering a knockoff at the final step, and reselling yours on the gray market).

This is all common knowledge, proven by example after example that it's necessary to have zero trust. It's truly an adversarial system. All the extra engineering effort for IQC is still cheaper. And, there's rarely an alternative to the amazing manufacturing ecosystem that is China.

After tracking down several of these types of issues, it appears that the Chabuduo mindset [1] is a very real thing.

[1] https://news.ycombinator.com/item?id=32465780

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by phil21 on Monday July 21, 2025 @07:02PM (#44641353)
Yep. Anything I get from China, even from a vendor I have done lots of business with in the past gets at minimum random samples inspected and tested when appropriate. Every single shipment, zero exceptions before use.

So many things are caught. At best there is a lack of QA on the Chinese side, but it's definitely worse than that. They have no qualms sending you known-bad items, and just see it as "maybe the customer won't notice" and worth a try. It's definitely a giant pain in the ass, and adds a ton of expense and friction to the process. Lots of stuff you simply cannot source from any other country though - even if you do, the supply chain usually traces back to China anyways so all you're doing is adding a middleman layer to the problem.

It's extremely important to set very explicit and strict quality parameters and specifications prior to any deal you do with a vendor. Even then you will miss things that will later be argued about. The more you can specify the better, otherwise it will be seen as negotiable/changeable.

A lot of folks used to living in a high trust society get really taking advantage by this. Any vendor sourcing from China and not implementing an extreme level of QA to the process is being negligent, and I assume that's quite a lot if not the vast majority.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by bboygravity on Monday July 21, 2025 @07:41PM (#44641641)
I don't get how it's possible that nobody (other than Tesla) can manufacture batteries in the West?

It a glance this feels insane. Batteries are in everything and such a basic need.

How is it possible that buying through known scammers with tons of QA is still cheaper than manufacturing in the West?

Obviously for Tesla it isn't cheaper to buy from China, so why is it thought to be cheaper for the rest of the West? Is it purely scale?

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by thimabi on Monday July 21, 2025 @08:03PM (#44641824)
Maybe Tesla’s batteries have some sort of competitive advantage that Elon et al. don’t want to risk leaking to the rest of the world?

(no idea if that’s the case, I have no specialized knowledge about batteries, just venturing a guess)

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by stephen_g on Monday July 21, 2025 @08:45PM (#44642100)
No, the cells themselves are fairly standard and built by third parties (Panasonic, LG, CATL), just co-located in Tesla's factories.

The battery packs themselves have been pulled apart and studied by everyone, pretty much all EV manufacturers are doing similar things anyway, so no real special sauce anywhere anymore.

Now there are more mature EV players in the game, innovations are happening from many manufacturers now (not just Tesla leading anymore) and then everyone else converges on the best ideas.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by thimabi on Tuesday July 22, 2025 @11:19AM (#44648161)
Thanks for the explanation! It’s always nice to learn something new :)
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by lazide on Monday July 21, 2025 @08:03PM (#44641818)
The West is an order of magnitude (or more) more expensive, that’s why.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by Dylan16807 on Monday July 21, 2025 @08:48PM (#44642127)
That doesn't sound right. Tesla sells battery packs for around 3x the price of Chinese batteries.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by lotsofpulp on Monday July 21, 2025 @08:01PM (#44641808)
Presumably some combination of higher labor and environmental costs.

It is remarkable that Tesla was able to figure it out.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by phil21 on Monday July 21, 2025 @08:44PM (#44642095)
It certainly started that way.

It's still that way, but a bit less so. The intractable problem now is entire supply chains end to end do not exist in the west. If you wanted to start a battery company you are going to have a really hard time sourcing all your components in-country. All the way down to the inks used in printing the serial number on stuff.

In the end of course it all ends up as a cost, but even if you somehow dropped all environmental standards and set the cost of labor to match China today it would take decades just to get the institutional knowledge and infrastructure back.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by stephen_g on Monday July 21, 2025 @08:43PM (#44642088)
But Tesla don't make battery cells - Panasonic, LG and CATL make those (although co-located in Telsa's factories).
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by jsight on Monday July 21, 2025 @10:16PM (#44642626)
That isn't true for Tesla's 4680 that was briefly in the AWD Model Y and is currently in the Cybertruck. They are well behind the leaders in range and charging, but the company claims that they are competitive with cells from their suppliers on cost. Charging performance is on par with cars like the F-150 Lightning, which also isn't very good.

They are also starting to build their own lfp batteries at a new factory in Nevada, though it sounds like those will be for stationary storage.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by nebula8804 on Monday July 21, 2025 @11:50PM (#44643061)
How did they fall behind? Didn't they have tabless and 4680 first? Did they lose Talent post 'Nazi' Musk?
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by adgjlsfhk1 on Tuesday July 22, 2025 @12:48AM (#44643327)
a lot of it is probably lack of scale. Tesla is making not that many batteries on the scale of CATL. naziness probably didn't help, nor the fact that Tesla/Musk is fairly famous for working employees way too hard until they burn out.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by nebula8804 on Tuesday July 22, 2025 @10:03PM (#44655072)
>a lot of it is probably lack of scale.

Thats what im thinking as well. I was concerned when Straubel announced his departure but after reading multiple sources, it seems like the real reason he left was because he was getting bored and wanted to start something new (battery recycling). My hope is that he put a team there to continue onwards. It didn't seem like anyone was panicking when he announced, sounded like it was in the works for a while.

Cybertruck was supposed to have something like 250k yearly right? Are they even getting 30k yearly?

But still...tabless, structural pack, 4680, dry cell these are all things they had in production first right?

BYD Blade is amazing, but its more of a optimizing a mass market LFP cell no? Whereas I am referring to putting cutting edge tech into production.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by bboygravity on Tuesday July 22, 2025 @06:19PM (#44653635)
Yeah, all the employees left and all of Musk's companies are now bankrupt after he visited Israel to visit families of victims of the Hamas terror attacks and he then deliberately did a nazi salute and deliberately ordered an LLM to convert everybody into nazis in an attempt to take over the world.

/s

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by acdha on Monday July 21, 2025 @09:20PM (#44642301)
Tesla buys most of their batteries from Japanese and Chinese companies like Panasonic and CATL. Some of those are assembled in factories like the Nevada gigafactory where Panasonic runs part of the factory. They’ve struggled with quality and capacity issues, which I think really just hits the idea that China spent decades on infrastructure and it’ll take similar amounts of time to catch up.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by anjel on Tuesday July 22, 2025 @03:33PM (#44651981)
Meanwhile the Chinese Economy has (a dif't set of) infrastructure deficiencies of at least the same magnitude as the US so this world dominationation trip Xi is on is no less egotistically delusional than MAGA such that China needs the US as much as the US needs China. Leaders will always play the violin while the town's aflame.

/Games Without Frontiers

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by conradev on Monday July 21, 2025 @10:06PM (#44642571)
Tesla is struggling to manufacture its own cells: https://www.energytrend.com/news/20240628-47693.html

As for designing them, this was a good interview with the CEO of CATL pointing to talent pipeline issues. We don't train enough chemical engineers: https://www.youtube.com/watch?v=5VIXjjw4u9A

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by tim333 on Tuesday July 22, 2025 @06:16AM (#44645145)
That was interesting - CATL has 21000 engineers and several hundred PhDs developing batteries and been doing it for 25 years. You can see why it's hard for some western startup like Northvolt to compete with that.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by thedougd on Monday July 21, 2025 @11:53PM (#44643078)
Toyota built a battery plant in North Carolina.

https://careers.toyota.com/us/en/tbmnc

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by happosai on Monday July 21, 2025 @11:53PM (#44643084)
Batteries where "uninteresting" so their production was outsourced to Asia. Chinese invested in battery science, engineering and manufacturing. Fast forward a few decades, and here we are.

Now with EVs and energy storage batteries are super interesting, and battery factories are being built in west too - by Asian companies (CATL, LG, Panasonic).

Even Tesla doesn't make their own cells, Panasonic does. Tesla's promised own cells are only in very few Teslas.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by fragmede on Tuesday July 22, 2025 @01:01AM (#44643392)
How does that work out in practice? Panasonic owns the machines, do they employee and manage their own set of workers in the Tesla factory in Reno? and then Tesla pays Panasonic who pays them, even though they're working right alongside the Tesla employees? How distinct is it, really, when they're in the same factory working side by side?
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by moooo99 on Tuesday July 22, 2025 @07:51AM (#44645731)
I would imagine this is most likely a shop in shop scenario, which is rather common in the automotive industry.

Basically, a specialized vendor for a given component is setting up their own production/assembly in your facilities - in some instances even along your assembly line.

The workers operating these machines are usually trained and employed by the supplier.

This setup does have some benefits, like less potential for supply chain disruptions as well as guaranteed capacity. But it is extremely personell intensive and generally requires enormous upfront investments.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by anon7000 on Monday July 21, 2025 @11:55PM (#44643092)
Scale is definitely a huge part of it. China controls huge amounts of the earth’s (processed) lithium & rare earth metal supply: https://www.reuters.com/markets/commodities/china-is-oversup...

On top of that, the US does not have very many lithium or rare earth metal mines or processing facilities relative to our demand.

But it’s hard to deny scale: the US is a populous country. But there are more than ONE BILLION more people in China. It’s foolish for us to expect to stay on the same playing field forever. The economies of scale and innovation you can accomplish with that many people is… a lot.

This was a fascinating article about specifically the robotics side of technology, touching on some of these points: https://semianalysis.com/2025/03/11/america-is-missing-the-n...

Part of the idea is that there are cities in China that have really strong positive feedback loops when it comes to developing new, cheap robotics tech. Whereas in the US, it might take weeks to order parts from suppliers in, you guessed it, China. It’s hard to compete with companies that have direct access to the supply chain and skilled workers right across the street, in an industry where lots of iteration and evolution is necessary.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by moring on Tuesday July 22, 2025 @02:03AM (#44643654)
> But it’s hard to deny scale: the US is a populous country. But there are more than ONE BILLION more people in China.

This is true for the US alone, but US+Canada+EU is on the same order of magnitude, all of which prefer a more-than-zero-trust situation.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by dotancohen on Tuesday July 22, 2025 @02:55AM (#44643943)
Which is also very spread out, with an ocean bisecting. Not exactly "skilled workers right across the street" for most of that land.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by arccy on Tuesday July 22, 2025 @03:22AM (#44644110)
not just an ocean, the various governments and visas make it hard to move people you need
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by FirmwareBurner on Tuesday July 22, 2025 @04:47AM (#44644633)
Visas are a political human construct subject to change, not a immovable force of nature. The same visa keeping workers out, can always be removed or changed over night if desired to achieve the opposite effect: move masses of skilled people in. See operation paperclip.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by RobotToaster on Tuesday July 22, 2025 @07:45AM (#44645685)
Not just people, parts too. Importing parts from the USA to the UK often takes longer and has more paperwork than from China.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by throwaway3025 on Tuesday July 22, 2025 @08:54AM (#44646271)
Also don't forget tolls / tariffs. Building products that relies on parts from different countries (at least from/to USA) reduces the margins compared to a unified Chinese market.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by moring on Tuesday July 22, 2025 @07:13AM (#44645472)
China is huge in area too. You don't have one billion people right across the street. Anything that is across the street is, by definition, a localized thing involving far fewer people, which you can totally have in US+CA+EU too.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by sitkack on Tuesday July 22, 2025 @11:14AM (#44648055)
If you look at historic locations of hyperinnovation there are bunch of different things. One of which is density of the activity and the supply chain. Imagine needing a new gearset for a robot, you roll down to Gear Set Alley looking for a used unit, you hit 4 different robot wrecking yards, explaining to 5 people along the way. They eventually point you over to machine shop that has modified an existing part into exactly what you are looking for.

You can solve in a day what might take you a day, what might take you 20 days, 3x the price and a lead time of weeks. These kinds of hyperfocused, super dense innovation zones have existed in many places across all of time.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by moring on Friday July 25, 2025 @06:37AM (#44681684)
A bit late, but I'll try...

This assumes that Gear Set Alley is near you. At >3km you'd go by car and the "meet people on the way" breaks down. At >100km you'd rather call them and miss the wrecking yards and other factories nearby.

In China, Gear Set Alley may easily be 1000km from you. Or it may be <3km from you, if you're lucky. The point is that China, taken as a whole, has no advantage over EU or US in geographical proximity. Certain regions may have that advantage, but that is totally possible in every country on earth (beyond a certain, very tiny minimum size).

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by numpad0 on Tuesday July 22, 2025 @09:49AM (#44646877)
I don't want to, but I can't stop thinking that DJT might be kind of right on this one. Each of economical blocks in this world such as EU/US, China, or Japan, don't mutually co-depend enough for any foreign currencies like USD or CNY to be single universal representation of values.

The current US administration's weird argument is that the USD values exchanged in inter-national trades must be symmetrical, but if you think about it, the amounts just don't mean anything. Balancing the amount only, like forcing the other party buy tons of American stuffs, won't solve it. The exchanged amounts only fuel philosophical border towns and dependency chains don't penetrate deep into foreign economies. The prices are not manipulated, it's just random.

The US has enough of everything to make batteries, you just can't fight something sold at completely arbitrary prices on economical grounds.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by LorenPechtel on Tuesday July 22, 2025 @06:54PM (#44653946)
The numbers aren't even relevant as he's obsessing about flows tracked across borders. An awful lot of what the US exports is services and data, not things, and doesn't show up.

Look at that research base that got targeted. Imports: what the scientists need. Exports: science. The latter doesn't show up, it looked like it was hugely "out of balance" despite the only inhabitants being penguins.

In the real world, something's being exported even if you're not tracking it. If there was a large, continuing imbalance the relative values of the currencies would change.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by corimaith on Tuesday July 22, 2025 @07:31PM (#44654200)
https://www.imf.org/en/Blogs/Articles/2022/08/04/blog-global...

The US is running a persistent current account deficit (and the largest one at that) for 20 years, which is the more relevant metric that includes services & data. This is an undisputed fact by most economists and institutions.

The relative values of currencies aren't changing because the central banks of surplus countries are actively managing capital inflows by buying foreign assets to keep their currency values stable. The Fed is one of the few that don't because they don't have that mandate.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by corimaith on Tuesday July 22, 2025 @07:26PM (#44654165)
>The current US administration's weird argument is that the USD values exchanged in inter-national trades must be symmetrical,

In Econ 101 going back to Keynes, if you run a persistent current account surplus, the increased demand for your currency to pay for your exports will strengthen your currency, thus reducing the competiveness of your exports, thus reducing your trade surplus. Vice versa for a deficit. Hence persistent trade imabalances should not exist due to self-balancing FX-effects.

This isn't happening in reality for a variety of reasons, but it's common knowledge that it's government policies that directly try to prevent that from occuring. Capital Controls, Protectionist Policies, etc, the most explicit mechanism is the controversial currency manipulation, whereby many central banks manage capital inflows by buying US assets to keep their currency stable.

But the aggregate result of this is that we have a strange situation today whereby the US dollar is simultaneously strong yet running a massive deficit, while surplus countries have weak currencies. And these imbalances are growing rather than shrinking. Many mainstream economists don't think the situtation is sustainable, but their proposals to fix it are differing.

I'd agree that Trump's method of "forcing" other countries to buy more American stuff is just a short-term fix that won't solve the underlying issues, but the real solutions of tariffs, currency revaluations or introducing capital controls will be hard to stomach for everyone, albeit necessary. Although the "correct" solutions like the Bancor will all be much more harmful to surplus countries than the USA.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by Eisenstein on Wednesday July 23, 2025 @07:16AM (#44657881)
But countries don't pay for imports with the currency of the producing nation and get their own currency for their exports. They use the USD for that. Econ 101 doesn't apply when you are an international reserve currency because demand is not exclusively tied to exports.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by corimaith on Wednesday July 23, 2025 @10:52AM (#44659871)
Increasing FX reserves also increases the national currency's strength because the Central Banks has more reserves to prop up it's value. The opposite is what we call a currency crisis when you run out such reserves and the value of your currency falls.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by delfinom on Monday July 21, 2025 @08:16PM (#44641916)
>A lot of folks used to living in a high trust society get really taking advantage by this.

Everything you describe happens even with US suppliers. Dealing with one right now that sent us sheet metal that was painted + silkscreened incorrectly (a very large symbol was completely dropped by them). They proceeded to "refinish" them, wrong by silkscreening a second time which completely degraded the quality of smaller text on the metal panel.

They got sent back and told to rework the panels completely (strip them). And what did they do? Not strip the paint fully and now components that slot into the panels do not fit because there's basically an extra 1/8" of paint on the inside edges.

The worse part due to our own internal politics, we couldn't just let use our significantly more reliable Chinese supplier who has easily eaten a million dollars in errors before.

This US supplier is charging us for every single bit of their incompetence.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by phil21 on Monday July 21, 2025 @08:50PM (#44642145)
Presumably this is an "honest" mistake via incompetence by the vendor, with horrible follow-up to remedy said mistake. The same of course happens with every vendor located anywhere in the world. It's getting much worse lately in the US as far as I can tell.

The difference though is your vendor using a lower grade metal than specified, knowingly and with intent to defraud since they decided that you might not notice and/or care enough for it to matter. That sort of thing doesn't seem to happen as much in the West.

I do agree that the reliable Chinese vendors will make things right at their expense if you can prove that they did not meet what they agreed upon. This is basically how I choose to deal with a vendor or not in China (or anywhere, for that matter) - I know stuff will happen, but how hard did I have to fight for them to make it right?

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by throw4d3235g on Tuesday July 22, 2025 @01:30PM (#44650444)
> That sort of thing doesn't seem to happen as much in the West.

This happens a lot in Italy. There was even a huge scandal about how olive oil isn’t pure olive oil.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by nomel on Monday July 21, 2025 @08:52PM (#44642151)
> This US supplier is charging us for every single bit of their incompetence.

I don't think that's entirely fair, since there's definitely some naivety here. "What happens if there's a mistake" needs to be the first thing you ask, when working with anyone. If you don't, you've both agreed to an uncomfortable argument, when things go wrong. Get it out of the way at the beginning, but expect to pay a little more for not relying on hopes and dreams of perfection.

And, there's a good chance that if you read the fine print, you explicitly agreed to this.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by rincebrain on Monday July 21, 2025 @10:34PM (#44642713)
Intel used to be infamous for doing this, if you'd like a western example.

A number of the integrators I worked with added rules banning customer-supplied CPUs because Intel would give away "working" product to educational/other institutions that, uh, did not POST, and it was such a headache so often that they banned using the product.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by electroglyph on Tuesday July 22, 2025 @05:48AM (#44644970)
what? that makes no sense, why would Intel do that?
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by ethbr1 on Tuesday July 22, 2025 @10:29AM (#44647354)
Because the person at Intel giving them away wasn’t performance benchmarked on whether they worked or not?

Anytime you find a weird outcome, assume there’s an internal misaligned incentive in a company. (Or just laziness / incompetence)

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by rincebrain on Tuesday July 22, 2025 @03:27PM (#44651920)
I can't speak to why, but I can promise you firsthand that both of those statements were true and not things I simply heard about.

My old workplace received such donations, we had to pay to replace a number of them that were DOA in the resulting systems, and the VAR we were using to build our systems for us informed us they had added a policy forbidding BYO for that reason between our failure rate and others who had used them.

My assumption would be that they were only slightly more carefully managed than things that "fell off a truck" - that is, they were probably given away internally because they were nominally cosmetically unsuitable for sale and not easily salvageable by binning, but you got what you paid for in terms of warranty coverage.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by da_chicken on Tuesday July 22, 2025 @06:31AM (#44645245)
I have family in the auto industry, and they have similar stories. They'll get a shipment and it'll be out of spec. So they contact the vendor and the vendor will just say, "No, they're fine. Parts are good." No, they're out of spec and you need to fix them. Look, I can show you. "No, parts are good." And you'll go around and around like that. They won't care and won't budge.

Until you say, "Well, since these are out of spec, we're not paying for them. That's in the contract." And now it's suddenly a problem for them!

But the Korean and Japanese can be even weirder, because they will often only listen to someone if they have at least as much seniority as them. Like it won't matter how right you are, just your position.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by jppj on Tuesday July 22, 2025 @09:08AM (#44646419)
Was this last paragraph necessary?
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by tuyiown on Tuesday July 22, 2025 @09:36AM (#44646716)
We're talking about culture differences about perception of accountability. Not necessary but definitely on topic.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by izzy776 on Tuesday July 22, 2025 @10:58AM (#44647788)
Cultural differences is an easy sub for racism? Not suggesting bad faith but when it's hard to also take commentary on Asia with good faith here.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by shkkmo on Tuesday July 22, 2025 @12:32PM (#44649515)
I don't know, assuming all cultures should be functionally equivalent seems pretty imperialist to me.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by throwawaylaptop on Tuesday July 22, 2025 @09:10PM (#44654757)
I'm Polish and when I mentioned it I always get commentary about how smart or hard working Polish people are, and usually mention of some mathematician or programmer they knew at some point. And it makes me laugh because if you notice that Polish people are smart or hard working, why don't you give me a quick rundown of who you think is lazy and dumb? Ohhh, that's racist.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by da_chicken on Wednesday July 23, 2025 @03:54AM (#44656765)
So I was talking with the family I mentioned about this issue last night, and he said they got training on it and called it power distance index. Japan and Korea are high index cultures. He mentioned that it's caused airline disasters. It still surprises him sometimes when he encounters it because it's so different from American and automotive engineering culture both.

So I looked, and yeah it's pretty well described:

https://en.wikipedia.org/wiki/Power_distance

https://en.wikipedia.org/wiki/Impact_of_culture_on_aviation_...

So, my question to you is, given that the above is pretty widely recognized, why is it racist to merely describe an experience with this cultural difference?

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by throwawaylaptop on Wednesday July 23, 2025 @04:14PM (#44663491)
That was basically my point. For some reason commenting on positive traits is totally acceptable. But God forbid someone comments on a negative statistical trait, you're a racist.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by shkkmo on Wednesday July 23, 2025 @03:43PM (#44663162)
Acknowledging cultural differences is different from assuming that cultural differences are determined by genetics and not life experiences.

Saying that someone grew up in a culture that values a certain type of academic education and achievement is different than saying they have those characteristics because of their racial genetic heritage.

It's also one thing to be aware of cultural trends and differences when designing multicultural systems to function well. It's another to project cultural trends onto individual people since the variation between people in a culture easily dominates the variation in the averages between cultures.

Of course, nuance like this rarely makes it into common discourse, which often does end up just being racist.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by bigbadfeline on Tuesday July 22, 2025 @11:09AM (#44647980)
Truth is always necessary, I can confirm it about the Japanese - it can get really weird, a lot weirder than anything I've experienced with Chinese nationals.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by wdb on Tuesday July 22, 2025 @09:35AM (#44646701)
It's always good to check your vendors. I wouldn't limit it to Chinese vendors only. I have experienced similar issues with American or European vendors. Americans are pretty bad a fix spec issues compared to Europeans.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by ruslan_sure on Tuesday July 22, 2025 @12:40PM (#44649632)
so LLM-like)
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by maxglute on Monday July 21, 2025 @05:45PM (#44640775)
>Chabuduo mindset [1] is a very real thing

IMO high tech cost optimization is like the opposite of chabuduo - it's not half-assing, but over value engineer under pressure. The PRC's "amazing" manufacturing system fosters adversarial competition down the supply chain because there are so many competitors, packed with technical talent incentivized to value-engineer the shit out of everything to squeeze out fractions of a RMB more per unit. Some engineering team probably poured thousands of man-hours and retooled $$$ manufacturing lines just to gain a tiny margin edge. Sometimes that backfires. But the pressure isn't about laziness - it's involutionary effort. The result is still a zero-trust environment, since when manufacturing base is so dense, everyone incentivized to cut corners or optimize/tweak silently, they usually do, forcing everyone upstream to stay hyper vigilant. So we end up in default equilibrium where it's cheaper/more optimal to squeeze downstream and inspect.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by bfung on Monday July 21, 2025 @08:09PM (#44641860)
^^^ is closer to the truth for the swap out; eek out those margins.

Culturally, chabuduo is more of an excuse/greed of the lazy to convince you it’s close enough [that it won’t make a difference to you] and they’re too lazy or out of patience, for many reasons they also don’t want to explain to you.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by themaninthedark on Monday July 21, 2025 @06:32PM (#44641148)
Value engineering is great and all but that doesn't sound like it is the only factor at play.

> and that the product being given to you is even yours (delivering a knockoff at the final step, and reselling yours on the gray market).

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by taneq on Monday July 21, 2025 @07:21PM (#44641474)
I mean, “keep the nice thing you built and send a dodgy knock off” sure does raise your quarterly gross margin…
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by maxglute on Monday July 21, 2025 @11:05PM (#44642865)
Many factors, including shady, I'm just noting it's not laziness / chabuduo culture driving behavior in these scenarios.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by RicoElectrico on Monday July 21, 2025 @07:59PM (#44641787)
If you ever watched BigClive, the Chinese often make mistakes that can't be explained by cost optimization.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by lazide on Monday July 21, 2025 @08:04PM (#44641828)
It certainly can be explained by some variant of fraud though.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by burnt-resistor on Tuesday July 22, 2025 @03:13AM (#44644049)
Speaking of which, I have a pile of sketchy Chinese AliExpress electrical and electronic gadgets I need to send BigClive. Adds to reminder list.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by jacquesm on Tuesday July 22, 2025 @02:56AM (#44643946)
It's one thing to optimize for cost, it's another to commit fraud. Just like knocking over old ladies and running off with their handbags is a potential source of revenue, you just shouldn't do it. The bigger underlying problem is that this sort of fraud goes without penalty.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by mac-mc on Tuesday July 22, 2025 @05:22PM (#44653159)
Does this also partly explain why appliances don't last long, there is no margin of durability for anything?
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by cm2187 on Monday July 21, 2025 @05:37PM (#44640712)
reminds me of this old but crazy if true comment: https://news.ycombinator.com/item?id=18138699
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by ForOldHack on Monday July 21, 2025 @07:43PM (#44641653)
A strict "do not trust" because BOOM! Do not trust. Wow, and we are betting the bank on this type of garbage.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by ajsnigrutin on Monday July 21, 2025 @05:14PM (#44640495)
Yep, there is an interesting book "Poorly made in china" talking about the same thing... not powerbanks but same modus operandi.

For example (hope I didn't mess up the details, it's been some time since I read it), a cosmetics manufacturer vendor replaced shampoo bottles with ones made with less (thinner) plastics multiple times, untill they started being destroyed in shipping... without notifying the company that ordered the shampoo... and then wanted more money for the "better" shampoo bottles.

Also some very questionable practices:

-----

The hair gel that we produced at the factory was green. One day, I noticed that the worker who filled the gel bottles had a skin condition. His hands were covered with the slick formula, and beneath the green, shimmery layer, I could see that the skin on his hands was peeling. Small, raw patches of flesh were exposed, and you didn’t have to be a dermatologist to see that his skin was infected.

“We should probably do something about this one,” I said to Sister, trying to sound calm, while in my head alarm bells were ringing.

Sister did not see the point. “Why?” she asked.

“It might be a health issue?”

“But the worker has done nothing wrong. It’s just an allergic reaction.”

Trying to press the matter, I suggested that the worker might contaminate the product.

Sister twisted around the argument. “How can he harm the product when it was the product that caused him the harm?”

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by yegle on Monday July 21, 2025 @05:09PM (#44640436)
This seems to be startlingly contrast to all the talks about "US manufacturers are absolutely doomed w/o Chinese vendors' great products and quality control" when Trump increased the tariffs.

I can only find https://youtu.be/3ZTGwcHQfLY but earlier this year it was all over YouTube.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by Dylan16807 on Monday July 21, 2025 @08:17PM (#44641930)
I didn't hear a single person talking about wanting or needing China's great quality control. Are you sure there's a conflict here? I think you oversimplified when you were listening to what people were saying.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by nomel on Monday July 21, 2025 @05:24PM (#44640579)
> This seems to be startlingly contrast

Only to someone not involved with Chinese manufacturing.

It's not too hard to find good manufacturers that you can trust. If you do, they will be operating with this same mindset, completely distrusting everyone else. Great! You're done, right? Well sure, until management changes (this happened to us once).

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by Spooky23 on Monday July 21, 2025 @05:35PM (#44640695)
Suppliers are always low/no trust unless you’re a sucker.

The only difference is that is more difficult to hold Chinese suppliers accountable. Americans will happily cheat you as well.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by themaninthedark on Monday July 21, 2025 @06:58PM (#44641319)
Not sure what you have had to deal with but that is not my experience at all. More often than not any issues I have had with suppliers is my purchasing department was the one trying to get lower cost goods without getting engineering and Vendor QC involved.

I have never had to deal with an American supplier "downsizing" wire from one guage to the next smaller for example.

Nor as linked above, including extra electronics to exfiltrate credit card data from terminals.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by FpUser on Monday July 21, 2025 @06:15PM (#44641020)
>"Americans will happily cheat you as well."

I did not have too much experience with US manufacturers. I however can talk about Canada and Brasil. My experience with Brasil was stellar. Canada - you better fucking watch. As for China - I did order directly high power DC/DC converters. Those were available in the US and China. China came 10 times cheaper ($25 vs $250 apiece). The devices where we have installed those still work like a charm more than a decade after.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by theLegionWithin on Monday July 21, 2025 @07:07PM (#44641393)
Chinese manufacturing 10+ years ago is completely different to Chinese manufacturing in 2025. the other comment about "zero trust" is significantly more apt
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by m-s-y on Tuesday July 22, 2025 @09:12AM (#44646450)
It’s always different 10 years ago, though, isn’t? Everything is. Rose colored glasses and all.

I remember these exact same “Chinese quality” threads 10 years ago and they read pretty much the same as this one, complete with the “well 10 years ago I got great stuff” and “yeah 10 years ago was different”.

Cycles, man. Cycles.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by nomel on Saturday July 26, 2025 @05:56PM (#44697231)
Another explanation could be that things have continued to degrade.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by djmips on Monday July 21, 2025 @06:52PM (#44641277)
That sounds like very specific anecdata for Canada vs Brazil.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by FpUser on Monday July 21, 2025 @08:30PM (#44642022)
It is. I am pretty sure examples of this and that exist in either country. I am just telling my own very narrow impression.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by XorNot on Monday July 21, 2025 @05:20PM (#44640536)
Did you miss the "it's still cheaper then building in the US" part?

US manufacturers aren't doomed: they already don't exist, and the infrastructure needed to support them also does not exist.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by subscribed on Monday July 21, 2025 @06:12PM (#44640994)
Smarter Every Day had a very interesting video about trying to make a reasonably simple barbecue tool entirely in the US.

Close to impossible without a serious time investment and dedication.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by Chachichichi on Monday July 21, 2025 @09:06PM (#44642234)
To me they're still doing a "trust but verify" system. Zero trust would mean not trusting them with their products at all and moving manufacturering elsewhere. It sounds like Anker skimped on verification and they're paying the price.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by nomel on Tuesday July 22, 2025 @05:32PM (#44653248)
> would mean not trusting them with their products at all and moving manufacturering elsewher

That's not an option. There's usually nowhere else to go that makes financial sense. So you work in the cheap zero trust environment, and pay a bit more to verify everything.

Anker skimped on verification because there was non-zero trust, and they're paying the price.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by jacquesm on Tuesday July 22, 2025 @02:52AM (#44643921)
And if you're really clever about this you do it dockside, in China.
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by spooky_deep on Tuesday July 22, 2025 @04:05AM (#44644391)
Must cost a fortune for business to operate in such a low trust environment.

Free market types take note: good regulation and “red tape” can actually help free enterprise

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by sillystu04 on Tuesday July 22, 2025 @04:09AM (#44644415)
Isn't this a matter of tort law rather than regulation?
Re:What went wrong inside recalled Anker PowerCore 10000 pow... by thenthenthen on Tuesday July 22, 2025 @12:09PM (#44649072)
Insert obligatory Poorly Made in China ref[0].

It is a great read and surprisingly (scarily so) still relevant. I do however take issue with the title (clickbaity), it is a tad repetitive and sometimes very insightful while one paragraph later it reads like the authors first 10mins in China.

[0] https://en.m.wikipedia.org/wiki/Poorly_Made_in_China

Edit: note, the tricks described in this book are not exclusive to china.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by throw4d3235g on Tuesday July 22, 2025 @01:26PM (#44650400)
> it appears that the Chabuduo mindset [1] is a very real thing.

Sounds like “fail fast, fail often.”

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by yencabulator on Wednesday July 23, 2025 @05:35PM (#44664292)
You probably also do not pay those Chinese vendors for that service. Cheap is cheap.

The old argument for why IBM PCs (pre-Lenovo) cost more than a competitor was that they guaranteed the supply chain to exist when a repair was needed across your whole fleet of deployed machines.

Similarly, Winnebago RVs have a specific quirky reputation that the manufacturer holds on to molds of all previous products essentially forever, so they can re-manufacture parts to things that haven't been in stock for years.

Re:What went wrong inside recalled Anker PowerCore 10000 pow... by ksec on Thursday July 24, 2025 @09:54AM (#44670713)
>This is all common knowledge, proven by example after example that it's necessary to have zero trust.

I still remember in 2012 - 2013, when I suggested exactly that, someone on HN replied and suggested I was racist.