News for hackers. Stuff that matters.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by smiley1437 on Sunday January 31, 2021 @07:18AM (#25978261)
I used to desire putting rack mounted equipment in my homelab and actually filled a lackrack with decommissioned servers and switches but quickly found that rackmounted equipment tends to have loud, high speed fans which are quite unpleasant to spend any time with.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by MasterScrat on Sunday January 31, 2021 @08:48AM (#25978789)
I have a 14U rack next to my desk.

It's doable, but you need to spend time to optimize the noise factor:

- If you need many cores but can live with lower clock speeds, you can underclock.

- 1U servers will be noisy no matter what. 2U is already more manageable. 4Us are the best.

- GPUs will be noisy, no real solution around that. High heat production, and they hinder the air flow, so the front fans will have to spin faster. I physically remove GPUs from chassis when I'm not actively using them.

- There are small-size soundproof server cabinets that can easily solve this problem. They're very expensive though.

- Depending on the server, you can directly control fan speed at the firmware level. This needs careful control if you don't want to destroy your hardware and/or burn down your place.

- The pandemic makes all this much harder. I used to keep things running lightly during the night and full blast during the day when everyone was out of the house. I saved tons of money, compared to what I would have paid on any cloud platform. Now that we're home 24/7 it's not so worth it anymore.

Also this is all worth it if you actually enjoy playing with the hardware, in that case the money you put into this brings you both fun and cheap compute. If the setup is a chore for you, don't do it, it probably won't be worth your hourly rate.

Fun fact: the noise/space/aesthetics factors are referred to in the community as the "WAF" - Wife Acceptance Factor ;-)

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by na85 on Sunday January 31, 2021 @11:54AM (#25980162)
>Fun fact: the noise/space/aesthetics factors are referred to in the community as the "WAF" - Wife Acceptance Factor ;-)

I work in Aerospace so I spend entirely too much time around pilots, amongst whom it's a common thing to refer to Wife Acceptance as Tower Clearance. E.g.:

>I'm thinking about getting one of those big green eggs

>Nice. Do you think Tower will let you?

>I won't let her see it until it's too late

Etc

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by unixhero on Sunday January 31, 2021 @10:42AM (#25979573)
You must acquire a HP Z series Z620 machine for your server needs. Potentially also the Z840 and newer versions Z series (must verify noise emissions from all subsequent models above Z620). I have had a huge success with my Z620. Considering expanding to buy more nodes. It has a very low accoustic footprint. My girlfriend instantly approved :)

edit: yes, get the version with the Xeon E5 series. Preferably already with the double CPU configuration.

edit2: yes, and also don't get the first version that has Xeon X-series. It will not perform well enough for semi-modern homelab workloads.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by fencepost on Sunday January 31, 2021 @12:29PM (#25980555)
There are at least 2 generations of the motherboard, make sure you get the second (z620). Also if it still has the original workstation Nvidia card, toss it and replace it. Pissed off the cat that settles on top of the machine since it was no longer so warm, but definitely cheaper to run and the new cheap card is faster too.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by KaiserPro on Sunday January 31, 2021 @11:16AM (#25979831)
Just to back this up, the HP z series is rack mountable, but also stackable.

They can be used for structural purposes as well, its perfectly possible to make a sturdy set of bookshelves with 4x z620s and 4 scaffold planks.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by Lex-2008 on Sunday January 31, 2021 @09:37AM (#25979109)
> "WAF" - Wife Acceptance Factor ;-)

You made my day! That's the primarily limiting factor in my "bedroom datacenter" expansion :D

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by pbronez on Sunday January 31, 2021 @10:21AM (#25979430)
Honestly it’s a brilliant term. I’ve seen it in the Audiophile, DIY Audio, and Synthesizer communities as well.

While WAF capacity tends to be fairly constant over time, careful strategic planning can ensure sufficient WAF capacity to avoid significant restrictions on side project activity.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by weeboid on Sunday January 31, 2021 @09:31AM (#25979059)
Threadripper and 10 SSD RAID array, everything liquid cooled with one large slow fan. Throw in some LED edge RAM
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by 127 on Sunday January 31, 2021 @08:53AM (#25978817)
You can always water-cool the GPU, with big radiators. I have no idea about how to do it in 4U, I personally just use off the shelf consumer hardware (mini-ITX, small PSUs, short GPU, etc.) and 3D print the cases. ~10 cm height is perfectly achievable with custom cases and PCI riser cables.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by eptcyka on Sunday January 31, 2021 @09:45AM (#25979178)
There are no riser cables that are stable for PCI-Ev4.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by MichaelBurge on Sunday January 31, 2021 @10:18AM (#25979403)
LINKUP sells them - I have 7 for a home server. Up to 50cm for v4 and I have a couple v3 because they go up to 1 meter.

https://www.amazon.com/gp/product/B0898QMCLS

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by colejohnson66 on Sunday January 31, 2021 @09:57AM (#25979270)
I’ve never heard of this. Can you explain why?

(I don’t use riser cables FWIW)

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by 1996 on Sunday January 31, 2021 @02:47PM (#25981895)
Higher frequencies are more susceptible to interference, especially if you have long cables.

A short 2 inches riser, surrounded by a grounded metal sheet, might work.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by davemp on Sunday January 31, 2021 @10:15AM (#25979388)
I’d imagine the parasitic capacitance becomes more of an issue at the higher frequencies of v4.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by damagednoob on Sunday January 31, 2021 @08:56AM (#25978828)
> There are small-size soundproof server cabinets that can easily solve this problem.

I would have thought anything that restricts sound would also impede air flow.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by MasterScrat on Sunday January 31, 2021 @09:03AM (#25978868)
See eg this demo: https://youtu.be/NfTP3yhTybc?t=150

I could never afford one (they're also super heavy so you have to be careful your floor can take it) but I assume the idea is to replace the airflow noise of many small fans with a few much larger ones.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by lostlogin on Sunday January 31, 2021 @01:14PM (#25981032)
I’m a proponent of using Intel NUCs as headless servers. I’d be happier if the psu brick was incorporated and there was another nic, but they quiet, small and powerful in the NUC8 and NUC10 flavours. They can fit 2 drives when in the larger sized case, and so a NAS or similar is probably needed.

They can be stacked, are readily available and seem very reliable.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by 1996 on Sunday January 31, 2021 @01:49PM (#25981369)
To scale, I prefer tablets with a wwan port and a shattered screen: on ebay, for less than $100 each, I can fit 2x m2 NVMe (one 2242 in the wwan port), they are small, and each come with their own UPS (battery) and standardized power connector (USB-c) while supporting KVM (AMT if you know which models to buy)
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by lostlogin on Sunday January 31, 2021 @05:05PM (#25983014)
Nice. What are you running on them?

ESXi runs nicely on a Nuc, and it’ll do a load of VMs with plenty of resources (the Nucs will take 64gb). But the price for that is probably 5-10x what you are describing.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by 1996 on Sunday January 31, 2021 @05:27PM (#25983220)
> the price for that is probably 5-10x what you are describing.

Indeed the reason why I do what I do!

I can have 10x of them for the cost of 1 of your Nucs.

For example, my latest purchase was $15 per tablet with 8Gb of RAM, delivered. Add 2x brand new M2 2230 drives which cost about $20 apiece, and each node costs about $55.

> What are you running on them?

Sharded databases and Ceph clusters mostly. Each shard uses very little power (and does not run hot) but has 2x nvme in mirror. With raid10 f2 on linux or zfs mirror on bsd you gain in read speed on top of the raid1 safety.

Sometimes I add USB external storage: tablets often have 2 USBC ports, so $100 gives an extra 8Tb for warm storage. For HDD, USBC is not a restricting factor anymore.

Now I am trying VMs: with a dedicated NVMe, IO performance is good, but there is not enough RAM yet. When 16Gb becomes the new normal, that will be much easier.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by girvo on Sunday January 31, 2021 @06:29PM (#25983719)
My home server for years was various laptops with busted screens :) ran quiet, low power usage, but with more than enough compute for my usage!

I’ve lately moved to a second hand Dell SFF office PC, as it gave me more expansion and even faster compute. Sits next to the router in the lounge, the girlfriend forgets it’s even there!

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by neilv on Sunday January 31, 2021 @03:56PM (#25982497)
I could use a more flexible/scalable term. SOAF (Significant Other Acceptance Factor)? SOA? SOFA? SOC (SO Compliance)?

https://news.ycombinator.com/item?id=25067485

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by DrBazza on Sunday January 31, 2021 @08:48AM (#25978787)
I had a colleague back in the very late 90s that lived in a typical British semi-detached house. Under the stairs was a cupboard against the external wall. He decided to make that his server room with a rack and "cheap" second hand kit.

To cool it, he drilled through the external brick wall several times and fitted exhaust fans.

His hall sounded like standing behind a 747.

If it rained, he often ended up tripping the fuses.

</end of anecdote>

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by riedel on Sunday January 31, 2021 @11:25AM (#25979893)
In our dorm all CS student closets rather resembled server racks. A friend overdid it though as he additionally used 4 workstations as bedposts. In summer he regularly slept in the shared kitchen because in addition to noise the temperature would also be of concern. I don't think the WAF would have been measurable.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by noxvilleza on Sunday January 31, 2021 @11:38AM (#25980005)
Not a full server-rack but had 4 desktops (2-side by side on either side of my small desk) running a variety of stuff in my first two years of university (CS1.6 servers, WoW emu server, network bridge, teamspeak, DC server) - one was my personal computer. In 3rd year it went up to 5 since my room was slightly bigger and my friend would often come play games in my room (he didn't have internet).
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by nathancahill on Sunday January 31, 2021 @08:53AM (#25978816)
Harry Potter and the Chamber of CPUs
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by ashtonkem on Sunday January 31, 2021 @09:22AM (#25979003)
Harry Potter and the Mysterious Case of Tinnitus.
[dead]
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by D2187645 on Sunday January 31, 2021 @12:31PM (#25980573)
Harry Potter and the Fun Police
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by xwdv on Sunday January 31, 2021 @09:59AM (#25979288)
Harry Potter and the Enormous Electric Bill.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by mnky9800n on Sunday January 31, 2021 @07:31AM (#25978318)
I had a roommate who did this. He did computational neuroscience back before gpus were a thing. It was great for heating the house. Terrible for actually being in the house.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by dmd on Sunday January 31, 2021 @09:53AM (#25979236)
Hah. I did computational neuroscience back before GPUs were a thing. It's astounding really. Jobs I ran back in 2005 that I waited days for take, literally, minutes now.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by bayindirh on Sunday January 31, 2021 @09:02AM (#25978865)
To my surprise, All the Dell servers we have try to keep the noise at a minimum unless they're pushed to their max.

I'm not aware of the any other servers, switches or actively cooled equipment tried to do that.

IBM BladeCenter H is the worst offender: "Is acoustic management enabled? No? OK, everything is at full speed, then".

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by smiley1437 on Sunday January 31, 2021 @09:37AM (#25979104)
I remember going to a Bladecenter demo at an IBM facility when they first came out, and the demonstrator pulled something that triggered the fans to go on HIGH and the way it wound up like a jet engine was so comically loud the entire room of 30 guests all broke out laughing

Here's an idea of what it was like:

https://youtu.be/pS8h8z1c0bI?t=106

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by bayindirh on Sunday January 31, 2021 @09:44AM (#25979168)
In the video you can hear only one of the two. Other one is connected to other power supply.

We had a lot of them, with full configuration, at full load. Go, figure.

They can generate a lot of heat though.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by smiley1437 on Sunday January 31, 2021 @09:51AM (#25979217)
Good lord, must have been like a wind tunnel in the back of the rack!

To be fair, they ARE impressively CPU dense

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by ashtonkem on Sunday January 31, 2021 @09:10AM (#25978910)
I think that small businesses and home buyers have begun to make noisier (heh) demands for quieter servers. I assume that a sizable percentage of the 1U market is going to small businesses that don’t want their printer closet sounding like it’s trying to take off.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by detaro on Sunday January 31, 2021 @09:55AM (#25979249)
The more usual small business form factor is less-deep 3-4U cases that can be used as a tower or rackmount (once we go past small NAS boxes). Or shallow 1U with low-power parts for routers/small appliances.

"Proper" 1U servers feel more like a thing for larger places, where density starts to matter more. Not sure why so many comments here focus on 1U.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by WrtCdEvrydy on Sunday January 31, 2021 @12:00PM (#25980228)
Because decommissioned 1U is the cheapest entry into homelabbing (check labgopher)
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by detaro on Sunday January 31, 2021 @12:04PM (#25980262)
The usual recommendations are R720 and DL380 though? neither of which are 1U.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by bayindirh on Sunday January 31, 2021 @01:54PM (#25981406)
R720 and DL380 are old, very ubiquitous servers. They are good workhorses and parts are plenty. Also they're not very closed platforms. They're not very silent though.

However with an iLO or iDRAC license, they're joy to administer and use. They're also very reliable too.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by ashtonkem on Sunday January 31, 2021 @11:39AM (#25980007)
I think instinctually it feels like 1U is what you should buy if you don’t need top of the line. That was my assumption as a non-hardware guy considering a home rack. I changed my mind once I found out about the noise issue.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by bayindirh on Sunday January 31, 2021 @11:53AM (#25980147)
You can get many top-of-line servers for various scenarios in 1U configuration. It can be quite packed up to a point (including GPUs).

For home use servers, if you want 1U form factor, you can take a look at Dell's shallow 1U servers. They're pretty modestly powered but small, I think relatively silent and easy to maintain.

Higher end servers have some fun features like advanced BMCs and such, but they come with relevant price tags, power consumption and noise.

You can also look at SME tower servers.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by MasterScrat on Sunday January 31, 2021 @09:05AM (#25978883)
Recent HP servers do the same, and are actually quieter in my experience.

But yeah as soon as you put an unsupported HDD or extension card in there, it'll assume the worst and spin everything full blast.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by bayindirh on Sunday January 31, 2021 @09:07AM (#25978897)
Trying to keep the noise is at minimum is a noble thing to pursue I think. Otherwise it's deafening when it's working in the system room.

In an HPC environment that doesn't matter much, anyway. Heh.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by Symbiote on Sunday January 31, 2021 @09:19AM (#25978981)
Less fan noise is less airflow, which means less cold-side air wasted.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by colejohnson66 on Sunday January 31, 2021 @09:59AM (#25979290)
I thought fan noise was also affected by the fan’s mechanics? Like, the bearings and such? Sure, you’re not going to get the same performance out of a silent fan as a jet engine, but the noise gains (heh) are worth it in most cases.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by bayindirh on Sunday January 31, 2021 @10:09AM (#25979357)
> I thought fan noise was also affected by the fan’s mechanics?

In a 1U server, you're running 5-7 tandem mounted, counter rotating Delta fans which can spin up to 18KRPM. They're in a confined space, have big cores to drive them and they need to supply a blanket of airflow to get things cool.

Higher efficiency components and a good implicit airflow design affects much more than the fans themselves, since there's not much space to optimize the fan design itself compared to the airflow as a whole inside the server.

Moreover, more intelligent system management solutions with more sensors both inside the chips and on the motherboard allows the BMC to see the whole picture and manage these fans in a more informed manner.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by GordonS on Sunday January 31, 2021 @08:24AM (#25978625)
With the likes of AMD Threadripper around now, I guess there is even less reason now to have a home rack - a single Threadripper in a standard tower case likely has more compute capability than most home racks from just a few years ago.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by jowsie on Sunday January 31, 2021 @08:42AM (#25978749)
The main reason now is cost, however it's hard to hit the sweet spot between initial investment and on going electricity costs.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by gbil on Sunday January 31, 2021 @01:03PM (#25980920)
About 10 years ago I tried to built my own rack in the basement so noise was not the issue but power consumption was the issue. After connecting a few Cisco switches on my UPS I realized that each one was consuming at least 60-80W being idle which would sum up to a considerable amount of money running 24/7 together with the rest of my planned to be equipment. As I was only going to run this setup for the fun of it, after a couple of months I decided to give the majority of the network hardware away and use gns3 for the limited work I wanted to do
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by bombcar on Sunday January 31, 2021 @01:39PM (#25981295)
Mikrotik sells an amazing line of high-speed low power switches, but most of the server gear still draws a lot of wattage.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by allenu on Sunday January 31, 2021 @09:28AM (#25979039)
In the late ‘90s I had an internship at IBM. Sometimes you’d need to go into the server room to do your work and I remember the white noise from all the fans in there being perfect for falling asleep to. Granted, that wasn’t the goal, but if you went in there in the afternoon to get work done, it took all of your willpower to not fall asleep at a terminal.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by noneeeed on Sunday January 31, 2021 @09:31AM (#25979063)
Likewise. I did one at Hursley in 2000 and had to go down there when one of the Linux boxes would freeze up during performance testing and would need a physical reboot. So loud down in that basement.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by alexpotato on Sunday January 31, 2021 @02:02PM (#25981489)
I did something similar with an old server a friend of mine acquired from a internet company that had gone out of business.

I remember taking out ALL of the fans AND trying to put it under an arm chair and it was still the loudest thing in my apartment. Needless to say, I got rid of it not long after that.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by high_density on Sunday January 31, 2021 @07:45AM (#25978395)
what about upgrading fans to silent fans? Has anyone tried noctua fans?
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by nippoo on Sunday January 31, 2021 @07:56AM (#25978450)
This is a typical 1U server fan. https://youtu.be/YrU1D4bgn78

There's not a lot of space left in a 1U server, and to get the right airflow, the airspeed has to be much much higher as what you'd get in a normal ATX case.

Can you replace it with quieter small fans, while maintaining good airflow? Sure sometimes. Is it ever going to be "quiet"? Not a chance.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by detaro on Sunday January 31, 2021 @08:14AM (#25978550)
Of course 1U servers are the most extreme case. Having rackmount equipment at home is fine if you can put it out of the way and pay a bit of attention to what you buy - i.e. a 3U or 4U machine will usually have much more normal fans you can swap to quiet ones. Some people also swap fans on 1U switches.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by MasterScrat on Sunday January 31, 2021 @08:58AM (#25978840)
Pro-tip: removing the fans from switches make them much quieter!

More seriously: most switches will survive fine without fans if you don't use them too intensely (see eg https://www.reddit.com/r/Cisco/comments/3iu57s/home_lab_swit...)

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by tumaal on Sunday January 31, 2021 @08:54AM (#25978822)
Contrary to what some sibling comments suggest, I am currently using an older HPE-2530-48G-PoEP switch with the 3 builtin fans swapped for Noctua nf-a4x20-pwm (installation went very smoothly). They are actually less audible than the disks of my NAS next to it. Admittedly, I am only using about third to half the ports and the load is only moderate most of the times but this setup has been working flawlessly for over a year now.

I guess it depends on your workload and the specific hardware involved but using server hardware with quiet fans in a living room environment can certainly be achieved.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by numpad0 on Sunday January 31, 2021 @01:51PM (#25981379)
Server fans are like 12V 1A, Noctua don’t make that kind of fans.

Fan diameter actually corresponds to server thickness. 1U use 4cm, 3U and 4U use 8 or 12cm. Power consumption stays the same, which means monsters like 1U Xeons come with like horizontal 8-unit array of a pair of contra-rotating 4cm 12V/0.5A(12V x 0.5A x 2 in series = 12W per unit) fans.

Noctua don’t make that kind of jet engines.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by ezconnect on Sunday January 31, 2021 @08:48AM (#25978788)
The fan will be more expensive than the one it is cooling and it wont make much difference in sound and it might even overheat because the silent fan run slower less air flow.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by GordonS on Sunday January 31, 2021 @08:21AM (#25978601)
Aren't Noctua fans quite large, like 12cm in diameter? In a 1U chassis, your fan can only be around 4cm in diameter, because they have to be mounted at the back. You can't mount them horizontally, because of course rack units are meant to be stacked close together.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by jowsie on Sunday January 31, 2021 @08:44AM (#25978760)
They start small enough for cooling VRM's and go up to iirc 20cm
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by Macha on Sunday January 31, 2021 @09:44AM (#25979164)
Note that small noctuas are not magic, like other small fans they're noticeably louder than larger fans.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by numpad0 on Sunday January 31, 2021 @01:57PM (#25981439)
Servers people are talking here are like 5cm thick and like 125W per CPU
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by bitcharmer on Sunday January 31, 2021 @09:57AM (#25979272)
Not sure how relevant my case is for the discussion because I have a dual socket Xeon workstation in a tower case. I built my rig with the big noctua coolers with brown fans. They are super quiet and highly recommend them.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by IshKebab on Sunday January 31, 2021 @08:18AM (#25978585)
There aren't any silent server fans. They're small high speed ones (they have to be because of the height restriction) so there's no way you can put a large low speed fan in like you can with a desktop. Plus servers run hotter precisely because they can have loud fans with lots of airflow.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by pmlnr on Sunday January 31, 2021 @08:27AM (#25978647)
Doesn't work; the 1U fans are a different format, than any noctua I was able to locate. Regardless I tried putting noctua in a 1U rack, ended up with horrible hack like this: https://petermolnar.net/article/home-server-downsizing/inwin...
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by z3t4 on Sunday January 31, 2021 @10:30AM (#25979495)
Servers are optimized for small size. If the rental space cost is not the biggest cost you can build a quiet server that also performs better! eg. something like a noctua nh on the cpu.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by seized on Sunday January 31, 2021 @03:14PM (#25982119)
Old hardware yes, newer generations are quite quiet when not under high load. But people buy old hardware and then find out the hard way...
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by progman32 on Sunday January 31, 2021 @12:48PM (#25980767)
Unfortunately true. I stuck a water cooling system in my home lab machines. Not plug and play as many components expect airflow anyway...
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by stevievee on Sunday January 31, 2021 @10:50AM (#25979651)
On decommissioned servers, if there is no variable speed control you can solder resistors to the fans and just monitor temps.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by toyg on Sunday January 31, 2021 @09:02PM (#25984787)
Fans are a solvable problem: just put a few walls and/or ceilings between you and them. What is not solvable is the power consumption. I got a secondhand server about 10 years ago, placed it in a cellar, played with it for a few months - and then I realized my electricity bill had gone up by 30%.

The hardware is probably much better now, if one pays attention, but still, it's a big gotcha.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by jansan on Sunday January 31, 2021 @07:28AM (#25978308)
This. You don't want to keep that stuff around you. It should be locked up in a server room or at least a closet.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by Tade0 on Sunday January 31, 2021 @07:31AM (#25978316)
And a well ventilated closet at that.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by kreeben on Sunday January 31, 2021 @07:49AM (#25978420)
Indeed. My rule of thumb is, if you can grow weed in your closet, then it's a good closet for servers.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by JoBrad on Sunday January 31, 2021 @09:38AM (#25979114)
And how do you know if you can grow weed in your closet?

Well, if you can put a few servers in there, you’re good!

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by kgermino on Sunday January 31, 2021 @07:53AM (#25978436)
Can you explain that? I’m not understanding the connection?
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by jacob019 on Sunday January 31, 2021 @08:00AM (#25978479)
You need good ventillation in a closet for both activities.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by skeeter2020 on Sunday January 31, 2021 @08:10AM (#25978534)
and lots of power.