I work in Aerospace so I spend entirely too much time around pilots, amongst whom it's a common thing to refer to Wife Acceptance as Tower Clearance. E.g.:
>I'm thinking about getting one of those big green eggs
>Nice. Do you think Tower will let you?
>I won't let her see it until it's too late
Etc
edit: yes, get the version with the Xeon E5 series. Preferably already with the double CPU configuration.
edit2: yes, and also don't get the first version that has Xeon X-series. It will not perform well enough for semi-modern homelab workloads.
They can be used for structural purposes as well, its perfectly possible to make a sturdy set of bookshelves with 4x z620s and 4 scaffold planks.
You made my day! That's the primarily limiting factor in my "bedroom datacenter" expansion :D
While WAF capacity tends to be fairly constant over time, careful strategic planning can ensure sufficient WAF capacity to avoid significant restrictions on side project activity.
(I don’t use riser cables FWIW)
A short 2 inches riser, surrounded by a grounded metal sheet, might work.
I would have thought anything that restricts sound would also impede air flow.
I could never afford one (they're also super heavy so you have to be careful your floor can take it) but I assume the idea is to replace the airflow noise of many small fans with a few much larger ones.
They can be stacked, are readily available and seem very reliable.
ESXi runs nicely on a Nuc, and it’ll do a load of VMs with plenty of resources (the Nucs will take 64gb). But the price for that is probably 5-10x what you are describing.
Indeed the reason why I do what I do!
I can have 10x of them for the cost of 1 of your Nucs.
For example, my latest purchase was $15 per tablet with 8Gb of RAM, delivered. Add 2x brand new M2 2230 drives which cost about $20 apiece, and each node costs about $55.
> What are you running on them?
Sharded databases and Ceph clusters mostly. Each shard uses very little power (and does not run hot) but has 2x nvme in mirror. With raid10 f2 on linux or zfs mirror on bsd you gain in read speed on top of the raid1 safety.
Sometimes I add USB external storage: tablets often have 2 USBC ports, so $100 gives an extra 8Tb for warm storage. For HDD, USBC is not a restricting factor anymore.
Now I am trying VMs: with a dedicated NVMe, IO performance is good, but there is not enough RAM yet. When 16Gb becomes the new normal, that will be much easier.
I’ve lately moved to a second hand Dell SFF office PC, as it gave me more expansion and even faster compute. Sits next to the router in the lounge, the girlfriend forgets it’s even there!
It's doable, but you need to spend time to optimize the noise factor:
- If you need many cores but can live with lower clock speeds, you can underclock.
- 1U servers will be noisy no matter what. 2U is already more manageable. 4Us are the best.
- GPUs will be noisy, no real solution around that. High heat production, and they hinder the air flow, so the front fans will have to spin faster. I physically remove GPUs from chassis when I'm not actively using them.
- There are small-size soundproof server cabinets that can easily solve this problem. They're very expensive though.
- Depending on the server, you can directly control fan speed at the firmware level. This needs careful control if you don't want to destroy your hardware and/or burn down your place.
- The pandemic makes all this much harder. I used to keep things running lightly during the night and full blast during the day when everyone was out of the house. I saved tons of money, compared to what I would have paid on any cloud platform. Now that we're home 24/7 it's not so worth it anymore.
Also this is all worth it if you actually enjoy playing with the hardware, in that case the money you put into this brings you both fun and cheap compute. If the setup is a chore for you, don't do it, it probably won't be worth your hourly rate.
Fun fact: the noise/space/aesthetics factors are referred to in the community as the "WAF" - Wife Acceptance Factor ;-)