News for hackers. Stuff that matters.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by bayindirh on Sunday January 31, 2021 @09:02AM (#25978865)
To my surprise, All the Dell servers we have try to keep the noise at a minimum unless they're pushed to their max.

I'm not aware of the any other servers, switches or actively cooled equipment tried to do that.

IBM BladeCenter H is the worst offender: "Is acoustic management enabled? No? OK, everything is at full speed, then".

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by smiley1437 on Sunday January 31, 2021 @09:37AM (#25979104)
I remember going to a Bladecenter demo at an IBM facility when they first came out, and the demonstrator pulled something that triggered the fans to go on HIGH and the way it wound up like a jet engine was so comically loud the entire room of 30 guests all broke out laughing

Here's an idea of what it was like:

https://youtu.be/pS8h8z1c0bI?t=106

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by bayindirh on Sunday January 31, 2021 @09:44AM (#25979168)
In the video you can hear only one of the two. Other one is connected to other power supply.

We had a lot of them, with full configuration, at full load. Go, figure.

They can generate a lot of heat though.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by smiley1437 on Sunday January 31, 2021 @09:51AM (#25979217)
Good lord, must have been like a wind tunnel in the back of the rack!

To be fair, they ARE impressively CPU dense

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by ashtonkem on Sunday January 31, 2021 @09:10AM (#25978910)
I think that small businesses and home buyers have begun to make noisier (heh) demands for quieter servers. I assume that a sizable percentage of the 1U market is going to small businesses that don’t want their printer closet sounding like it’s trying to take off.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by detaro on Sunday January 31, 2021 @09:55AM (#25979249)
The more usual small business form factor is less-deep 3-4U cases that can be used as a tower or rackmount (once we go past small NAS boxes). Or shallow 1U with low-power parts for routers/small appliances.

"Proper" 1U servers feel more like a thing for larger places, where density starts to matter more. Not sure why so many comments here focus on 1U.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by WrtCdEvrydy on Sunday January 31, 2021 @12:00PM (#25980228)
Because decommissioned 1U is the cheapest entry into homelabbing (check labgopher)
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by detaro on Sunday January 31, 2021 @12:04PM (#25980262)
The usual recommendations are R720 and DL380 though? neither of which are 1U.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by bayindirh on Sunday January 31, 2021 @01:54PM (#25981406)
R720 and DL380 are old, very ubiquitous servers. They are good workhorses and parts are plenty. Also they're not very closed platforms. They're not very silent though.

However with an iLO or iDRAC license, they're joy to administer and use. They're also very reliable too.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by ashtonkem on Sunday January 31, 2021 @11:39AM (#25980007)
I think instinctually it feels like 1U is what you should buy if you don’t need top of the line. That was my assumption as a non-hardware guy considering a home rack. I changed my mind once I found out about the noise issue.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by bayindirh on Sunday January 31, 2021 @11:53AM (#25980147)
You can get many top-of-line servers for various scenarios in 1U configuration. It can be quite packed up to a point (including GPUs).

For home use servers, if you want 1U form factor, you can take a look at Dell's shallow 1U servers. They're pretty modestly powered but small, I think relatively silent and easy to maintain.

Higher end servers have some fun features like advanced BMCs and such, but they come with relevant price tags, power consumption and noise.

You can also look at SME tower servers.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by MasterScrat on Sunday January 31, 2021 @09:05AM (#25978883)
Recent HP servers do the same, and are actually quieter in my experience.

But yeah as soon as you put an unsupported HDD or extension card in there, it'll assume the worst and spin everything full blast.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by bayindirh on Sunday January 31, 2021 @09:07AM (#25978897)
Trying to keep the noise is at minimum is a noble thing to pursue I think. Otherwise it's deafening when it's working in the system room.

In an HPC environment that doesn't matter much, anyway. Heh.

Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by Symbiote on Sunday January 31, 2021 @09:19AM (#25978981)
Less fan noise is less airflow, which means less cold-side air wasted.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by colejohnson66 on Sunday January 31, 2021 @09:59AM (#25979290)
I thought fan noise was also affected by the fan’s mechanics? Like, the bearings and such? Sure, you’re not going to get the same performance out of a silent fan as a jet engine, but the noise gains (heh) are worth it in most cases.
Re:How to Turn an IKEA Coffee Table into a DIY Server Rack by bayindirh on Sunday January 31, 2021 @10:09AM (#25979357)
> I thought fan noise was also affected by the fan’s mechanics?

In a 1U server, you're running 5-7 tandem mounted, counter rotating Delta fans which can spin up to 18KRPM. They're in a confined space, have big cores to drive them and they need to supply a blanket of airflow to get things cool.

Higher efficiency components and a good implicit airflow design affects much more than the fans themselves, since there's not much space to optimize the fan design itself compared to the airflow as a whole inside the server.

Moreover, more intelligent system management solutions with more sensors both inside the chips and on the motherboard allows the BMC to see the whole picture and manage these fans in a more informed manner.