Don't think it's a coincidence that the demo vid they're showing off is a flat factory roof
I think it'd be interesting to look at how these might be colocated with crops.
1. https://www.ted.com/talks/jenny_chase_solar_energy_is_even_c...
I'm not sure what a quarter-mile of solar panels four feet high would cost, or whether they'd survive the occasional cow rubbing on them. Neat idea, though.
Partial-shading-tolerance designed modern panels will quite happily tank partial shading, and as long as you keep the shading aligned in the design direction of the panel you will have within ~30% of the usual efficiency (i.e., still like 14% instead of the usual 20%) relative to the remaining irradiation that your panel is still receiving after the shading took it's chunk.
Just take care to ensure the shading conditions for all panels that are passively combined into an array are sufficiently same, or at least behave in a way that the modules can bypass effectively to not loose an unshaded panel's yield due to one panel in the group having some shade on it.
https://www.canarymedia.com/articles/solar/how-germany-outfi...
Edit: For larger installs (many vertical panels, >1kw), agree that balancing and a dedicated circuit is likely more optimal.
800w sounds low to me, especially on 120v in the US, but the rules may have been in place for older less efficient / bulkier panels in mind.
Bypassing the grid and using your own storage infrastructure is AFAIK not allowed in Germany (there are heavy taxes on electricity, that you would be omitting - similar as to how you technically are not allowed to make your own Schnaps at home due to taxing).
If people started plugging a 2kW grid tied inverter in a normal power socket - as is the case for balkonkraftwerk - houses would start catching on fire.
Nobody wants that. Yes, regulations are necessary for a safe and civil life.
Due to recent issues out there: calculate worst winter peak voltage and make sure there's a healthy margin to the peak allowed safe/no-damage input voltage to the MPPT/charge-controller/inverter.
Panels eat less of their own current at any given operating voltage, the colder they are. And winter mornings after soaking in night cold are worst case conditions for that as they had no time to heat up yet for the first minutes past sunrise.
The panels still don't generate any electricity at night of course, but other than that the output is an almost perfect inverse of the conventional equator-facing angled mounted panel output.
Just search for "bifacial solar panels graph".
But shading is also a factor. If you want to get unobstructed sun across the whole day, you need to be built on a nice curve of a hill? Or build just a straight line of panels?
We currently have:
- summer optimised array: almost flat, 15 degree, optimised for maximum power on sunny summer days, mostly runs our cooling
- winter/morning array. Points SSE, 65 degree incline. Gets great energy in the mornings, and on winter mornings. Performs surprisingly well in overcast conditions. Generates about the same power in midwinter and midsummer.
- winter/afternoon array. Same as the above, but SSW.
18kW total faceplate capacity, in reality we peak at around 5kW, but have that for about six hours of the day for 9 months of the year. Also means I can run three arrays on two MPPTs as the two tilted arrays are basically mutually exclusive as to when they make power.
The other reason for leaning towards vertical panels is cleaning. The flat panels accumulate a crust of crap (pollen, soot, dust) that cements on there fast, and requires vigorous scrubbing to remove. Kills 20% of the capacity unless I get up there with a broom every six weeks. The 65 degree ones I have not had to clean once, as stuff just slides off them.
That, and a pallet of bifacials is now cheaper than a pallet of monofacials.
This might work a lot better.
This opens the interesting prospect of hinged vertical pannels that could be adjusted for the season, opening up the V in winter and closing it in summer
One big trade off/risk is a large vertical panel essentially becomes a sail in high winds.
A vertical panel has infinite higher efficiency that a flat-mounted one, if a flat-mounted one couldn't be constructed due to floor requirements.
yes, and sometimes it's a positive effect.
source is e.g. https://theconversation.com/how-shading-crops-with-solar-pan...
Notably though grazing pasture mostly doesn't complain and if mounted suitably (IIUC low enough density and high enough start above the ground), it can co-exist with effective nature preserves.
Notably while the N/S bifacial have an amazing showing in sunny winter day with ground snow (as well a significantly higher resilience against snowfalls), the year round testing he did shows that the performance crater in spring, with half the performance of standard inclined panels, and none of the morning / evening advantages of E/W bifacials.
In the end, the N/S verticals have a worse year round production than every other setup, and significantly worse than standard, but if you live in a location with a fair amount of winter snow and can swing (heh) it a tilting mount could be an interesting configuration for winter.
Plenty of people have gardens and land that is tended to multiple times through the day anyway (for gardening, animals, workshop activity etc).
Now your panels start shading one another.
You're right on motorized trackers though, way too complex and expensive to make sense for most people
Yup, that's what I was referring to as a tilting mount in the original comment, a pivot and tracks to tilt the panels up/down to set them at whatever's optimal for your latitude and time period, or completely vertical if you're in a snow-heavy region.
The necessary engineering might not be worth it anyway, given current panel prices, unless space is a bit of a premium.
Depending on your local climate, that has to be sun and rain proof. (Most Nema 7 "3D printer" motors are not waterproof... Ask me now I know )
Nothing a quick hack job can't solve for you, but if you want to sell it (and make sure your customers will be satisfied for decades) it quickly adds up in price.
The panels can be stayed in their correct positions by a trash tire or whatever buried in the ground with two chains poking out to clip to the panel corner.
None of this is rocket science. This is all stuff that has been proven out over the past 200yr of fence and gate construction.
Similar could be used for changing between tilted and vertical though you'd need more material.
I guess you also don't need to remove the snow from the panels?
1. Bi-facial solar panels: can take in sunlight from either end
2. Mounting bi-facials vertically so they can take in sunlight from both directions.
I've been hearing experiments about these for a few years now. There's three main benefits to the vertical arrangement that could, given certain situations, make it more economically valuable:
1. In places with high-albedo snowy winters, this arrangement can boost winter production, which if you have snow, tends to be the energy-heavy time of year.
2. Keeps panels cooler. Panels lose efficiency when they get hot, and by having them vertical, they can run cooler. Losses in less direct sunlight are somewhat offset by efficiency gains from cooler operations.
3. More power during shoulder periods (anti-duck-curve). Especially in places like California that have high solar penetration, prices for excess energy are minimal during peak solar activity. Vertical arrangements give more power in the morning and evening, which is when traditional fields are just ramping up or ramping down. Thus, even if you're making less power overall, you can be making more valuable power by having more production during these ramp-up/ramp-down periods.
Unclear how much of an effect these counter-acting forces actually add, but I understand solar developers are looking into these arrangements.