News for hackers. Stuff that matters.
Re:The First Room-Temperature Ambient-Pressure Superconductor by slashdev on Tuesday July 25, 2023 @12:59PM (#36865498)
This is an unreviewed preprint coming out of South Korea. If it’s reproducible it would be the biggest scientific discovery of the last hundred years. It will literally reshape the world.

However, the most likely thing is they made a mistake and the paper will be withdrawn.

But imagine if it’s true.

Re:The First Room-Temperature Ambient-Pressure Superconductor by Mizza on Tuesday July 25, 2023 @01:22PM (#36865882)
"We believe that our new development will be a brand-new historical event that opens a new era for humankind."

Hell of a way to end a paper.

Re:The First Room-Temperature Ambient-Pressure Superconductor by ZiiS on Tuesday July 25, 2023 @01:46PM (#36866354)
If iron was worth naming an era after this will be.
Re:The First Room-Temperature Ambient-Pressure Superconductor by botro on Tuesday July 25, 2023 @02:57PM (#36867603)
But they've trademarked the name KL-99 (®) in their follow-up paper:

https://arxiv.org/pdf/2307.12037.pdf

Re:The First Room-Temperature Ambient-Pressure Superconductor by WASDx on Tuesday July 25, 2023 @04:46PM (#36869209)
Stone age

Bronze age

Iron age

LK-99 (®) age

Re:The First Room-Temperature Ambient-Pressure Superconductor by optimalsolver on Tuesday July 25, 2023 @05:03PM (#36869511)
If this is real, I wouldn't even mind.
Re:The First Room-Temperature Ambient-Pressure Superconductor by arrowsmith on Tuesday July 25, 2023 @02:02PM (#36866664)
Can someone ELI5 to those of us who aren't even sure what a superconductor is?
Re:The First Room-Temperature Ambient-Pressure Superconductor by HDThoreaun on Tuesday July 25, 2023 @02:13PM (#36866851)
A material with no electrical resistance. Build a wire out of it and the voltage will be the same on both ends.
Re:The First Room-Temperature Ambient-Pressure Superconductor by MayeulC on Tuesday July 25, 2023 @03:05PM (#36867709)
That also means that electrons flow unimpeded from one side to the other.

Great for energy transmission (though you can't put too much current, superconductivity breaks down under strong fields).

Great for fast circuits, such as CPUs, that don't waste energy just transmitting data.

Great for storing energy (in principle) by just making a loop and let current flow indefinitely.

Related, great for building powerful magnets (that are just such a loop) without wasting too much energy. Applications: MRI machines (they already use superconductors but are bulky due to the need for cooling) and other powerful magnets: LHC/particle accelerators, Tokamaks/plasma control/fusion. But also improved motors and generators.

Nice for levitating stuff since they levitate above magnets "for free" (due to their interaction with electrical fields, they reject magnetic fields). Possible applications for maglev (trains, etc), magnetic bearings, etc.

And possibly a lot of new applications opened up if you remove the need for cooling (Faraday cages?).

Of course, it all depends on how much current and temperature it can handle. But if this is real, just having one material is game-changing, and it will surely be improved upon by looking for similar properties in other materials. This one contains lead, which is a non-starter for a lot of applications due to its toxicity.

Someone else wrote a few use-cases in that other comment: https://news.ycombinator.com/item?id=36866686

Re:The First Room-Temperature Ambient-Pressure Superconductor by littlestymaar on Tuesday July 25, 2023 @04:01PM (#36868476)
> This one contains lead, which is a non-starter for a lot of applications due to its toxicity.

We've been using cadmium-based batteries for ages despite Cadmium being even more toxic than lead, and are still using lead batteries in ICE cars AFAIK. Lead toxicity isn't really a problem unless you burn it, deliver water through it or you put it on paint that end up in kids' mouth…

Re:The First Room-Temperature Ambient-Pressure Superconductor by MayeulC on Tuesday July 25, 2023 @04:56PM (#36869377)
I agree that it can still be used in a lot of applications, but this would probably restrict its use in everyday items, such as over-the-counter magnetic bearings,long-distance transmission lines, or consumer electronics (RoHS).

Lead batteries for cars are a bit special, as the whole supply chain goes both ways for recycling, while batteries are rather self-contained and not usually exposed to harsh environments.

Though I suspect you are right in the end, as it's a matter of judging the risk vs reward, I wouldn't be surprised if other materials with a similar structure end up performing similarly.

Pb is also quite hard to use in integrated circuits, as far as I know. I am no material scientist, but it could be due to its low melting point or tendency to contaminate other metals.

Re:The First Room-Temperature Ambient-Pressure Superconductor by jacquesm on Tuesday July 25, 2023 @03:31PM (#36868079)
And the voltage will be the same on both ends when it has current flowing through it.
Re:The First Room-Temperature Ambient-Pressure Superconductor by marcosdumay on Tuesday July 25, 2023 @04:41PM (#36869098)
The only thing that holds a voltage without current flowing through it is an insulator.
Re:The First Room-Temperature Ambient-Pressure Superconductor by jacquesm on Tuesday July 25, 2023 @04:48PM (#36869259)
This isn't even wrong. A voltage can be present without a current flowing. Touch any live wire to get an instant demonstration that there indeed was a voltage present even if no current was flowing. Not because the wire is an insulator but because it wasn't at that point in time conducting any energy. Your finger (also not an insulator) closing the circuit however allowed current to flow.
Re:The First Room-Temperature Ambient-Pressure Superconductor by marcosdumay on Tuesday July 25, 2023 @05:37PM (#36869924)
Ouch, you need to take another look at that.

The definition of an insulator is a material that holds (up to some amount of) voltage without electrical currents appearing.

Your example needs two wires. And the wires themselves don't have any voltage. All of the voltage is between them, and is only there because they are insulated from each other.

Re:The First Room-Temperature Ambient-Pressure Superconductor by jacquesm on Tuesday July 25, 2023 @05:46PM (#36870024)
No, the definition of an insulator is a material that doesn't have the ability to carry current because it has no free electrons.

You are conflating 'insulated' and 'insulator'.

Re:The First Room-Temperature Ambient-Pressure Superconductor by Tuna-Fish on Tuesday July 25, 2023 @02:55PM (#36867567)
When you cool some materials down until they are very cold, something weird happens: Their electrical resistance vanishes, and they start rejecting all magnetic fields. It's important to note that this is not a continuous process where things slowly change until it reaches zero, it is a step change after which everything related to electricity works very differently.

This doesn't mean there is no resistance in the wires that move electricity to your house, because superconductors only work when cooled to unpractically low temperatures, meaning they can only be used for special things like the magnets in MRI machines and fusion reactors.

That is, until now. This paper reports on a material that remains a superconductor at 127C.

Re:The First Room-Temperature Ambient-Pressure Superconductor by JumpCrisscross on Tuesday July 25, 2023 @04:47PM (#36869238)
> Their electrical resistance vanishes

To put this in further context, RTP superconductors mean compact, low-power MRIs and a massive shrinking, simplification and superpowering of magnetic-confinement fusion and ion propulsion designs. It blows apart chip designers' thermal constraints and opens up entire classes of energy-storage chemistries.

If this is real, it will be the defining discovery of our lifetimes.

Re:The First Room-Temperature Ambient-Pressure Superconductor by bananapub on Tuesday July 25, 2023 @06:53PM (#36870840)
> superpowering of magnetic-confinement fusion

though worth remembering we still don't know how to stabilise plasma or sensibly generate electricity from it.

> It blows apart chip designers' thermal constraints

really? much of the heat in chips comes from the /connections/ between transistors etc?

Re:The First Room-Temperature Ambient-Pressure Superconductor by bertil on Tuesday July 25, 2023 @02:03PM (#36866670)
Better than "Further research is warranted" and love "Further research is warranted." I really wish they didn't get that one wrong.
Re:The First Room-Temperature Ambient-Pressure Superconductor by telltruth on Tuesday July 25, 2023 @01:41PM (#36866259)
Could someone explain why is this world changing?
Re:The First Room-Temperature Ambient-Pressure Superconductor by unethical_ban on Tuesday July 25, 2023 @01:48PM (#36866403)
I believe MRIs use superconductivity, so I assume any application of superconductors that doesn't require heavy, large, energy-consuming cooling will benefit greatly.

Perhaps MRIs will become ubiquitous and cheap, something we all get every time we go to the doctor?

Superconduction also has some weird magnetic properties I believe, so there could be benefits regarding maglev transport.

And finally and most basically, the movement of electrical energy across potentially large distances with zero loss would be a great thing.

Re:The First Room-Temperature Ambient-Pressure Superconductor by fluidcruft on Tuesday July 25, 2023 @04:36PM (#36869024)
I have no real idea what I'm talking about but figure 1 has critical magnetic flux curve ranging up to 3000 Oe so... in MRI-speak maybe it tops out before 0.3T? IIRC permanent magnet MRI have already been built in the 0.3T range, but they're very heavy and outclassed by the higher-field scanners. Clinical MRI nowadays typically runs at 1.5-3T (with some clinical scanners at 5-7T).

Having said that there is a resurgence of interest in low-field MRI lately, primarily marketed for use in developing nations and for combination machines that integrate radiation therapy. From what I've heard from diagnostic radiologists, the low-field MRI scanners seem to be of limited diagnostic value on their own.

Re:The First Room-Temperature Ambient-Pressure Superconductor by cassepipe on Tuesday July 25, 2023 @01:51PM (#36866458)
I read that as an overly conservative cry :D
Re:The First Room-Temperature Ambient-Pressure Superconductor by traverseda on Tuesday July 25, 2023 @01:52PM (#36866466)
Superconductors are basically perfectly conductive wire. Wires that transfer 100% of power over arbitrary distances and that don't heat up. Obviously there are limits, you can't put arbitrary power over a hair thin filament but as long as you're under that limit you get perfect efficiency.

MRI machines can be made a lot simpler as you no longer need to use liquid nitrogen to cool the superconductors. MRI machines could end up being small and cheap.

Perfectly efficient electromagnets make a lot of problems in fusion reactors simpler, I'm not sure that room temperature superconductors make fusion reactors instantly viable but it's a big step and would reduce the energy requirements for a fusion bottle by a lot.

Basically anything involving electromagnets becomes a lot more efficient. Motors can be made smaller, generators can be made much more efficient for the weight, maglev trains can require very little power to hover. It has effects on almost every industrial process as it fundamentally changes the weight and energy efficiency of anything involving electromagnets.

One neat things would be surgical robots that can work as an MRI while also levitating a small blade in a 3D space. Challenging for sure but when you can replace complicated liquid-nitrogen cooled coils with an array of simple passive coils a lot of options open up.

Superconductors can also be used for power storage, and at room temperature that becomes a lot more viable.

Here's this big wikipedia page on applications of superconductivity: https://en.wikipedia.org/wiki/Technological_applications_of_...

Also on the less useful side, rail guns.

Re:The First Room-Temperature Ambient-Pressure Superconductor by Kirby64 on Tuesday July 25, 2023 @02:23PM (#36867018)
A note about MRI machines: they use liquid helium, not liquid nitrogen. LN2 isn't cold enough. Being able to eliminate liquid helium would be huge, as helium is scarse and quite expensive. Its roughly 10x the cost of LN2 and only going to get more expensive.
Re:The First Room-Temperature Ambient-Pressure Superconductor by Tuna-Fish on Tuesday July 25, 2023 @03:03PM (#36867684)
Previous improvements in high-temperature superconductors already made it possible to build a MRI machine using LN2 instead of LHe. I think all existing operational units still use LHe, but using LN2 has been demonstrated in lab conditions, and the next generation of machines will almost certainly use it instead of helium.
Re:The First Room-Temperature Ambient-Pressure Superconductor by inasio on Tuesday July 25, 2023 @04:34PM (#36868986)
Or maybe not anymore ...
Re:The First Room-Temperature Ambient-Pressure Superconductor by zardo on Tuesday July 25, 2023 @05:25PM (#36869833)
It still might be worth cooling this with LN2, in many applications, assuming critical current and critical field scale up as temperature decreases as they do with other superconductors.
Re:The First Room-Temperature Ambient-Pressure Superconductor by Tuna-Fish on Tuesday July 25, 2023 @07:59PM (#36871374)
It takes a long time to validate new stuff for medical devices. Even if this discovery completely pans out, there will be two or three generations of MRI machines based on LN2-cooled superconductors.
Re:The First Room-Temperature Ambient-Pressure Superconductor by fluidcruft on Tuesday July 25, 2023 @04:56PM (#36869391)
They use both liquid helium and liquid nitrogen. The nitrogen is used to cool the helium. On MRI scanners that have come to market in the last few years, helium volume has been reduced at least 100x and is now only a few liters (i.e. previously >1000L and requiring frequent top off to <1L and requiring refill only after emergency/full power loss).
Re:The First Room-Temperature Ambient-Pressure Superconductor by bilsbie on Tuesday July 25, 2023 @02:07PM (#36866749)
What kind of energy density could we get using it for energy storage?

Maybe it’s competitive with batteries if you don’t need any cooling?

Re:The First Room-Temperature Ambient-Pressure Superconductor by Workaccount2 on Tuesday July 25, 2023 @02:21PM (#36866971)
Superconductors are a transferring energy technology, not a storing energy technology. Although they would likely augment the efficiency of storage technologies.
Re:The First Room-Temperature Ambient-Pressure Superconductor by bilsbie on Tuesday July 25, 2023 @02:23PM (#36867012)
Re:The First Room-Temperature Ambient-Pressure Superconductor by sudosysgen on Tuesday July 25, 2023 @02:24PM (#36867040)
They can be used to store energy, though they're pretty terrible at it for all but specialized applications.
Re:The First Room-Temperature Ambient-Pressure Superconductor by traverseda on Tuesday July 25, 2023 @02:19PM (#36866946)
Like 1-10 wh/kg from what I've seen. Probably better off building a ring around the planet so we can just always have solar panels lit up somewhere.
Re:The First Room-Temperature Ambient-Pressure Superconductor by bilsbie on Tuesday July 25, 2023 @02:21PM (#36866988)
I wonder if that low number includes all the cooling equipment though?

But even if not it could be great for a capacitor alternative or stationary storage.

Re:The First Room-Temperature Ambient-Pressure Superconductor by marcosdumay on Tuesday July 25, 2023 @04:51PM (#36869309)
> What kind of energy density could we get using it for energy storage?

Actually, not a lot. The are some very compelling uses of them for storing energy, but they are much more relevant for distribution grid stability and control than for raw energy storage.

There are people here are pushing some really non-compelling use cases (like long distance power distribution), but there are plenty of transformative ones.

(But the thing is that this one on the paper is much less useful than it could be. There is still some work on understanding why and fixing it.)

Re:The First Room-Temperature Ambient-Pressure Superconductor by chasd00 on Tuesday July 25, 2023 @05:30PM (#36869842)
i bet companies that make elaborate cooling system for gaming pcs are getting nervous hah.
Re:The First Room-Temperature Ambient-Pressure Superconductor by webdood90 on Tuesday July 25, 2023 @11:14PM (#36872678)
thanks for this. I didn't understand what this changed until I read your comment.
Re:The First Room-Temperature Ambient-Pressure Superconductor by tills13 on Wednesday July 26, 2023 @02:14PM (#36882318)
Don't forget about computer chips that do not emit heat. So much wasted power at the datacenter scale simply to keep things cool. At a personal computer level things get way more efficient, too, resulting in cheaper, smaller, quieter computing devices.
Re:The First Room-Temperature Ambient-Pressure Superconductor by ZiiS on Tuesday July 25, 2023 @01:57PM (#36866556)
His many devices rely on coduction, how many are thermally limited by efficencies?
Re:The First Room-Temperature Ambient-Pressure Superconductor by mitthrowaway2 on Tuesday July 25, 2023 @02:04PM (#36866686)
Superconductors change every assumption about how we harness electricity and magnetism. Beyond reducing the cost of electricity transmission, they enable all sorts of fascinating applications:

- They enable low cost, continuous, passively-stable magnetic levitation. Superconductors could replace ball bearings in many applications.

- They enable permanent magnets that are far stronger than any we make from conventional magnetic materials. For example, motors tend to run at high speed and low torque, so as to minimize heat generated from current in the copper windings. Superconducting direct-drive motors could allow for ultra-high-torque actuators without any need for gearing, and with minimal heat generation or losses. So superconducting electromagnets could replace everything from electric motors to hydraulic pistons to simple springs.

- Superconductors allow for very sensitive antennas and magnetic field sensors, allowing for near-field detection of very small signals (such as from neurons firing in the brain). There is a lot of impressive technology that only exists inside research labs where a generous supply of cryogenic liquids are always on hand. Those could make their way into mass-market products.

That's just a very short list.

Re:The First Room-Temperature Ambient-Pressure Superconductor by LinAGKar on Tuesday July 25, 2023 @02:24PM (#36867039)
Something that immediately comes to mind for me in Sweden, is that the country is fairly long in latitude, and most of our electricity production is from hydroelectric power in the northern half of the country, while most of the population is in the southern half of the country. Better energy transmission could help a lot.
Re:The First Room-Temperature Ambient-Pressure Superconductor by postmortembees on Tuesday July 25, 2023 @02:14PM (#36866865)
What if your PC did not need cooling, because it generated no heat? How much more potent could computers be?
Re:The First Room-Temperature Ambient-Pressure Superconductor by mitthrowaway2 on Tuesday July 25, 2023 @02:25PM (#36867048)
It probably wouldn't greatly affect the heat generation in a PC, unless the transistors could themselves be replaced with some superconducting alternative. Harnessing the efficiency from that would probably require that the computer be designed as a reversible computer. It would be its own research avenue.
Re:The First Room-Temperature Ambient-Pressure Superconductor by sudosysgen on Tuesday July 25, 2023 @02:28PM (#36867102)
Unfortunately, as soon as you actually use the result of the computation in any kind of practical manner as an output, you break reversibility, though you could make the heat production happen away from the computation.
Re:The First Room-Temperature Ambient-Pressure Superconductor by MayeulC on Tuesday July 25, 2023 @03:14PM (#36867847)
I don't think you actually need reversibility if you don't discard the energy but return it to the power supply?

In other words, "reversibility", but you can actually pool the useless results together, you don't need to separate them later. Or so I read somewhere...

Re:The First Room-Temperature Ambient-Pressure Superconductor by sudosysgen on Tuesday July 25, 2023 @03:26PM (#36868015)
I might be wrong since I've studied this a long time ago, but from what I remember, in order to do that classically, you need to copy the output bits somewhere else before uncomputing your system and recovering the ancilia.

That's technically fine, as long as you have an infinite supply of stably initialized bits onto which to copy your result. Initializing those bits is going to be non-reversible in some way.

Re:The First Room-Temperature Ambient-Pressure Superconductor by piyh on Tuesday July 25, 2023 @03:59PM (#36868455)
Pentium 4 to 10 GHz, here we come!
Re:The First Room-Temperature Ambient-Pressure Superconductor by marcosdumay on Tuesday July 25, 2023 @04:56PM (#36869378)
The idea of reversible computing is that if you only add heat in a few instructions, you can have a much more economical computer. And magnetronics is a good candidate for implementing this, so yeah, computers that use a lot less power are an application too.
Re:The First Room-Temperature Ambient-Pressure Superconductor by sudosysgen on Tuesday July 25, 2023 @11:22PM (#36872722)
I haven't seen any reversible low power superconducting gate that can credibly operate at a high temperature - not because of the superconductor itself, but because of thermal noise. Again, I haven't read through the literature in this field for a while (and it wasn't that extensive either), but from what I recall what you're proposing is roughly as difficult as making a gate for a quantum computer, and you have to keep your system way colder than your critical temperature from that due to thermal noise. If you have any links for high temperature physically reversible logic gates I'm all ears.
Re:The First Room-Temperature Ambient-Pressure Superconductor by sudosysgen on Tuesday July 25, 2023 @02:26PM (#36867077)
Computation inherently generates heat, but if you could make chips that release negligible amounts of heat, you would unlock the third dimension which would help with reducing signal length and enable computers to be significantly faster.
Re:The First Room-Temperature Ambient-Pressure Superconductor by tills13 on Wednesday July 26, 2023 @02:16PM (#36882356)
That this as a solution applicable to _personal_ computing is a bonus. The real benefit is in datacenters which could be made smaller, more efficient, and cheaper while simultaneously adding capacity.
Re:The First Room-Temperature Ambient-Pressure Superconductor by javajosh on Tuesday July 25, 2023 @07:31PM (#36871167)
Other commenters have science fiction dust in their eyes, and speak of room temp superconductors in general. But this particular discovery is a brittle crystalline structure that cannot be extruded into wires, and does not have the high current capacity required for power transmission or rail-guns.

It's an important, exciting step but it's very far from world-changing at this stage. Or if it is in a limited way. The first transistors were clunky affairs, of limited usefulness, world changing for ship-to-shore communication in the military. But then people discovered how to make them with deposition instead of factories, and they got smaller and faster, and they really did change the world. We're in the "clunky transistor" period.

Re:The First Room-Temperature Ambient-Pressure Superconductor by jacquesm on Tuesday July 25, 2023 @08:06PM (#36871421)
> We're in the "clunky transistor" period.

Exactly. But that clunky transistor was in fact world-changing. It just took a while for the changes to take place but the stage was set when that first device showed that it could be done at all.

Re:The First Room-Temperature Ambient-Pressure Superconductor by javajosh on Wednesday July 26, 2023 @03:01AM (#36874010)
Oops, the first practical radios were powered by semiconductor rectifiers, not transistors. The Pickard silicon point detector circa 1906 was used in WWI (btw owning/making a radio was illegal during the war!)
Re:The First Room-Temperature Ambient-Pressure Superconductor by dehrmann on Wednesday July 26, 2023 @02:52AM (#36873947)
I assume we could make CPUs stupid fast if we didn't have to worry about heat as much, though I'm not sure how much is lost to resistance vs operating transistors.
Re:The First Room-Temperature Ambient-Pressure Superconductor by alsaaro on Tuesday July 25, 2023 @01:18PM (#36865818)
They claim to have observed the Meisner effect, quantum locking unique to superconductors, a pretty big signal, so more likely fraud than a mistake.
Re:The First Room-Temperature Ambient-Pressure Superconductor by sfink on Tuesday July 25, 2023 @01:29PM (#36866026)
Yes, normally when people come up with some BS about room temperature superconducting, they really just mean they've observed one of the indirect effects of superconductivity. "If you put an ohmmeter in my funky circuit, it displays zero!" Which usually just means you've come up with a clever way to break an ohmmeter.

Ejecting the magnetic field (the Meissner) is a way better sign.

I find it very hard to believe that this could be true, but at least they're measuring the right things.

Re:The First Room-Temperature Ambient-Pressure Superconductor by giarc on Tuesday July 25, 2023 @03:09PM (#36867763)
How long do you think it'll take for the scientific community to determine whether this is fraud, error or the real deal?
Re:The First Room-Temperature Ambient-Pressure Superconductor by scarmig on Tuesday July 25, 2023 @03:52PM (#36868377)
Less than a week. It's a simple material to synthesize, and the tests conducted on it are pretty typical with effect sizes that don't require any sophisticated statistics to observe.
Re:The First Room-Temperature Ambient-Pressure Superconductor by rotexo on Tuesday July 25, 2023 @03:17PM (#36867893)
Yeah, very probably fraud. Only puzzle is why they would choose something so easy for other labs to try (and fail) to replicate.
Re:The First Room-Temperature Ambient-Pressure Superconductor by carabiner on Tuesday July 25, 2023 @04:17PM (#36868726)
Desperate people do crazy things. This is career-ending fraud. South Korea has the highest suicide rate in the world. The pressure to achieve is enormous and makes people shortsighted.
Re:The First Room-Temperature Ambient-Pressure Superconductor by mrguyorama on Tuesday July 25, 2023 @05:52PM (#36870097)
This also wouldn't be the first time a south korean scientist blatantly made shit up to be a super special scientist in ROK.

All judgement withheld until we get a few more labs chiming in with their results though.

Re:The First Room-Temperature Ambient-Pressure Superconductor by hinkley on Tuesday July 25, 2023 @04:57PM (#36869396)
I haven't touched much physics since college. Could the Meisner effect be observed in a material that is not superconducting? Or would that be new physics if it were the case?

I suppose that would be a useful material even if it couldn't be used for high current applications.

Re:The First Room-Temperature Ambient-Pressure Superconductor by eterevsky on Tuesday July 25, 2023 @01:24PM (#36865931)
> the biggest scientific discovery of the last hundred years

I would say that electronic computers would take take the first spot for me, but I don't deny that room-temperature superconductors would be pretty close to the top.

Re:The First Room-Temperature Ambient-Pressure Superconductor by slashdev on Tuesday July 25, 2023 @01:36PM (#36866159)
I’d say electronic computers were the biggest invention of the last 100 years. But it wasn’t one discovery, that built upon many, many discoveries and breakthroughs.

As a singular discovery goes, it’s hard to think of something that tops this. Of course, even if this is true, bringing it to market in a practical way will probably look a lot more like the invention of electronic computers.

Re:The First Room-Temperature Ambient-Pressure Superconductor by LinAGKar on Tuesday July 25, 2023 @02:10PM (#36866797)
The transistor could probably qualify
Re:The First Room-Temperature Ambient-Pressure Superconductor by slashdev on Tuesday July 25, 2023 @03:15PM (#36867859)
Yeah, probably.
Re:The First Room-Temperature Ambient-Pressure Superconductor by MayeulC on Tuesday July 25, 2023 @05:15PM (#36869694)
Hmm, maybe the atomic bomb? The wright brothers's first flight took place about 120 years ago, so it doesn't qualify. However, in both cases, people knew it was a matter of time before someone figured the proper recipe. Room temperature/pressure semiconductors? That was still science fiction yesterday.

In short, you are probably right, with the sibling commenting on (BJT) transistors.

Re:The First Room-Temperature Ambient-Pressure Superconductor by ralfn on Tuesday July 25, 2023 @01:38PM (#36866198)
Computers were invented long before they became invented.

So that wouldn't be in the last 100 years.

However unlike computers, if this idea works, it will get productized quickly.

Re:The First Room-Temperature Ambient-Pressure Superconductor by eterevsky on Tuesday July 25, 2023 @08:57PM (#36871813)
I wrote electronic computers: a bunch of technologies like transistor and integrated circuits.
Re:The First Room-Temperature Ambient-Pressure Superconductor by rewmie on Tuesday July 25, 2023 @01:29PM (#36866023)
I'd say that not keeping electronic computers in mind is a testament to how big of a discovery they were, in the sense that we need to think hard about transformative discoveries to realize that not so long ago humanity didn't had electronic computers,and yet they are everywhere.
Re:The First Room-Temperature Ambient-Pressure Superconductor by rwmj on Tuesday July 25, 2023 @01:48PM (#36866397)
This (or something derived from it) would be used for power delivery literally everywhere in the world. It might well be bigger in scale and volume than all the computers.
Re:The First Room-Temperature Ambient-Pressure Superconductor by Maxion on Tuesday July 25, 2023 @02:02PM (#36866646)
Superconducting power transmission cables solves the power storage problem of renewable energy sources.

We'd just make a global energy grid, and the sunny side powers the dark side.

Re:The First Room-Temperature Ambient-Pressure Superconductor by Paul-Craft on Tuesday July 25, 2023 @02:37PM (#36867241)
That won't save us. Not unless you know how to build it in the next 5 years.

https://news.ycombinator.com/item?id=36836722

Re:The First Room-Temperature Ambient-Pressure Superconductor by pcdoodle on Tuesday July 25, 2023 @02:58PM (#36867619)
^Soyjacks pointing^

Joking aside, besides power transmission, what other obvious things can this tech be used for?

Re:The First Room-Temperature Ambient-Pressure Superconductor by MayeulC on Tuesday July 25, 2023 @03:09PM (#36867760)
I'm just going to link the comment I wrote above :)

https://news.ycombinator.com/item?id=36867709

Needless to say, this would be game-changing. But extraordinary claims require extraordinary evidence etc, let's be cautiously optimistic here.

Re:The First Room-Temperature Ambient-Pressure Superconductor by pcdoodle on Tuesday July 25, 2023 @06:02PM (#36870240)
Thank bro! are we talking like no heat loss in the traces on the motherboard type a deal or also on a wafer level internal to the CPU?
Re:The First Room-Temperature Ambient-Pressure Superconductor by MayeulC on Wednesday July 26, 2023 @02:04AM (#36873647)
Probably both? At least the first. For integrated circuits, I think lead is a hard pass (for now), and the deposition process needs to be worked out.

Ideally, this could be useful for the hottest paths: clock tree, high-speed buses, as well as the power supplies.

There are a few hurdles though: high-speed voltage changes create changing currents, which creates variable magnetic fields, which IIRC may be a problem depending on the superconductor's characteristics. Processors also work at low voltages, which means that they need huge currents. Both magnetic fields and large current (as well as high temperatures) can break down superconductivity. So it's challenging, but probably doable.

There are also superconducting structures that could replace transistors, see applications of https://en.wikipedia.org/wiki/Josephson_effect

Re:The First Room-Temperature Ambient-Pressure Superconductor by pcdoodle on Wednesday July 26, 2023 @11:16AM (#36879120)
Appreciate the follow up. This could be really cool!
Re:The First Room-Temperature Ambient-Pressure Superconductor by slashdev on Tuesday July 25, 2023 @03:13PM (#36867826)
Even if you were right, it behooves us to act as if our actions mattered. Otherwise, what’s the point.

I don’t think you’re right, for the record.

Re:The First Room-Temperature Ambient-Pressure Superconductor by Paul-Craft on Friday July 28, 2023 @04:59AM (#36904461)
You're right. But, we should also do things that matter. This wouldn't. Right now, our horizon is literally 5 years. Anything that doesn't help in the next 5 years needs to get in line, because we've got 50 years of inaction to make up for.

OTOH, I am also not sure what we as a species can do in the next 5 years that actually will matter.

Re:The First Room-Temperature Ambient-Pressure Superconductor by idiotsecant on Tuesday July 25, 2023 @04:13PM (#36868668)
It solves them for some cost of power cables < $X, where X is the cost of the power lost in traditional cables.
Re:The First Room-Temperature Ambient-Pressure Superconductor by nine_k on Tuesday July 25, 2023 @02:12PM (#36866832)
I think it's comparing incomparable technologies. Like the wheel and the alphabet; both changed human history in profound ways, without competing with one another.
Re:The First Room-Temperature Ambient-Pressure Superconductor by amluto on Tuesday July 25, 2023 @02:30PM (#36867123)
Dunno. A fancy tape or such made out of lead compounds is a hard sell in comparison to ordinary copper for household wiring.

But yes, for serious uses, this will be a big deal if it works out and can be made into a flexible cable. And I’m sure people will work on a less-toxic version.

Re:The First Room-Temperature Ambient-Pressure Superconductor by slashdev on Tuesday July 25, 2023 @03:15PM (#36867854)
Losses to resistance inside your home don’t matter much. In your computer they do, but it’s not clear this helps with that.

This would enable really long distance electrical transmission, which solves the whole intermittency issue with solar energy.

Re:The First Room-Temperature Ambient-Pressure Superconductor by nradov on Tuesday July 25, 2023 @03:56PM (#36868423)
Long distance electrical transmission will still require huge capital investments and lots of maintenance even if transmission losses are eliminated. And as a practical matter, strategic political concerns will take precedence. In the current political climate it's hard to imagine connecting our grid to potentially hostile nation states which might cut off power supplies to apply pressure during a crisis.
Re:The First Room-Temperature Ambient-Pressure Superconductor by idiotsecant on Tuesday July 25, 2023 @04:15PM (#36868695)
If we can't handle / get motivation for long-line HVDC transmission I guarantee you we aren't going to be able to put together the will to make an entire transmission system out of a novel material with unknown mechanical constraints. Long distance transmission is not a solved problem, but it's close. We have the technological capability now to make much, much better transmission systems. We just don't want to.
Re:The First Room-Temperature Ambient-Pressure Superconductor by CamperBob2 on Tuesday July 25, 2023 @03:23PM (#36867972)
I think we'd get over the whole RoHS thing, if room-temperature superconductivity is part of the deal.
Re:The First Room-Temperature Ambient-Pressure Superconductor by jjk166 on Tuesday July 25, 2023 @03:21PM (#36867943)
While that would be nice, it's not exactly revolutionary. We can already build cables to transmit power over vast distances and can certainly imagine a world where we do the same, but with higher efficiency. The computer transformed how we live our lives and reshaped our culture, to the point where what we are doing right now - casually chatting with anonymous people spread around the globe about a scientific paper that we can all read at our leisure immediately upon publication - was inconceivable within living memory.
Re:The First Room-Temperature Ambient-Pressure Superconductor by eterevsky on Tuesday July 25, 2023 @09:01PM (#36871848)
I think it would still change the world less than computers have changed it. Without computers we wouldn't have this conversation. So much in the modern world is basically impossible without computers.

Superconductivity will for sure enable some innovations and could change how we are building power grids, but I don't see it changing the world to the same extent.

Re:The First Room-Temperature Ambient-Pressure Superconductor by barnabee on Tuesday July 25, 2023 @05:16PM (#36869716)
Discovery vs invention
Re:The First Room-Temperature Ambient-Pressure Superconductor by DrBazza on Tuesday July 25, 2023 @01:32PM (#36866082)
Indeed, huge if true. I hope it's not another cold fusion moment.
Re:The First Room-Temperature Ambient-Pressure Superconductor by PaulHoule on Tuesday July 25, 2023 @01:27PM (#36865987)
To change the world it has to be manufacturable at scale, stable, etc.
Re:The First Room-Temperature Ambient-Pressure Superconductor by rewmie on Tuesday July 25, 2023 @01:33PM (#36866095)
I don't agree. Producing something at scale is only relevant if the goal is mass commercial distribution. Communication satellites changed the world and they are practically all (i.e., some exceptions such as space-x constellation) one-off builds of single-shot projects.
Re:The First Room-Temperature Ambient-Pressure Superconductor by barelyauser on Tuesday July 25, 2023 @01:39PM (#36866224)
Communication satellites only changed the world because they broadcast to mass produced receivers.
Re:The First Room-Temperature Ambient-Pressure Superconductor by rewmie on Tuesday July 25, 2023 @01:45PM (#36866329)
Mass produce as many receivers you want and don't launch the ad-hoc satellite. How useful are the receivers?
Re:The First Room-Temperature Ambient-Pressure Superconductor by akasakahakada on Tuesday July 25, 2023 @02:01PM (#36866641)
I believe receiver use same tech as transmitter. When you have one, you must have the counterpart.
Re:The First Room-Temperature Ambient-Pressure Superconductor by rewmie on Tuesday July 25, 2023 @02:57PM (#36867601)
> I believe receiver use same tech as transmitter.

The hard problem solved by satellites is getting the satellite in orbit and getting it to stay there.

Humanity already could send radio waves across the planet. Emitter and receiver is not the hard problem.

Re:The First Room-Temperature Ambient-Pressure Superconductor by barelyauser on Tuesday July 25, 2023 @01:54PM (#36866507)
There is always low range broadcast I suppose.
Re:The First Room-Temperature Ambient-Pressure Superconductor by akasakahakada on Tuesday July 25, 2023 @02:00PM (#36866624)
People use the same stupid argument when commenting on quantum computer. But in case of QC, one is powerful enough to compute everything and we might not even need two, except for spare. Say a 1000 qubits QC exist, Work that it can do is the sum of all computering power in human history. You cannot even verify if the result is right or not because simply you don't have any classical alternative for that workload.
Re:The First Room-Temperature Ambient-Pressure Superconductor by jcranmer on Tuesday July 25, 2023 @02:56PM (#36867573)
> But in case of QC, one is powerful enough to compute everything and we might not even need two, except for spare. Say a 1000 qubits QC exist, Work that it can do is the sum of all computering power in human history. You cannot even verify if the result is right or not because simply you don't have any classical alternative for that workload.

A 1000-qubit QC can't break a RSA-2048 key, let alone a lot of other interesting tasks. Quantum computers aren't magical things that provide exponential speedups on absolutely everything; they can only provide exponential speedups on some algorithms, and those algorithms generally require linear numbers of qubits to the problem size, so 1000 qubits is greatly limiting to problem size.

Re:The First Room-Temperature Ambient-Pressure Superconductor by akasakahakada on Tuesday July 25, 2023 @09:20PM (#36871994)
1000-qubit QC can't break a RSA-2048 key

Neither any classical computer can. We don't even have enough harddrive to store all quantum information in a 100 qubit QC, let alone 1000qubit. QC is limited to solve a subset of problems do not automatically equals to QC is useless comparing to classical ones. Also not able to invalidate the powerfulness of QC beyond 100 qubits.

Re:The First Room-Temperature Ambient-Pressure Superconductor by Maxion on Tuesday July 25, 2023 @02:04PM (#36866692)
Not necessarily. If this material is legit, this proves that room temperature superconductors can exist. If it works in this material, others might also work. Eventually it may lead to a material that can be manufactured cheaply enough. The potential monetary savings of such a material is so great, that you'll see billions flow into materials research.
Re:The First Room-Temperature Ambient-Pressure Superconductor by xeonmc on Tuesday July 25, 2023 @01:20PM (#36865854)
Re:The First Room-Temperature Ambient-Pressure Superconductor by downWidOutaFite on Tuesday July 25, 2023 @01:22PM (#36865888)
Even if we found the perfect material, where it was easy and cheap to create long strong wires for power transmission as well as semiconductor-scale nano wires, we'd be gaining something like (wild ass guess) 20% gain in efficiency. 20% would be nice but would it really beat the last hundred years of discoveries? I don't think so, especially with digital tech's profound world-reshaping continuing to accelerate.
Re:The First Room-Temperature Ambient-Pressure Superconductor by benlivengood on Tuesday July 25, 2023 @01:30PM (#36866046)
Specifically you could lay undersea superconducting cables around the world and rely on a global electrical grid which allows for nearly 100% solar generation.

Superconducting magnets become cheap and widely available which allows for maglev trains at massive scale. Costs for the LHC and similar experiments would drop dramatically. MRIs would only require air conditioning, if that; Modern cell phones are sufficient to compute tomography. Magnetic confinement fusion also becomes cheaper and easier. Electric cars could use superconducting motor magnets allowing for even greater power to weight ratios and efficiency.

Just a few things off the top of my non-mechanical-engineer head.

Re:The First Room-Temperature Ambient-Pressure Superconductor by nine_k on Tuesday July 25, 2023 @02:17PM (#36866908)
I think not just maglev: a lot of typical bearings could possibly be switched from ball / roll to maglev, saving a lot on friction and maintenance.

Undersea cables are a pie in the sky; current high-load cables in urban an industrial areas could be made much smaller, simpler, and lossless.

I wonder if transformers, currently huge and expensive, could be made better with this, too; at least the ohmic losses could be removed, and thus a lot of need for cooling, and the fire hazards.

Re:The First Room-Temperature Ambient-Pressure Superconductor by soperj on Tuesday July 25, 2023 @02:30PM (#36867135)
Why would you need transformers if you can send it losslessly?
Re:The First Room-Temperature Ambient-Pressure Superconductor by duskwuff on Tuesday July 25, 2023 @02:55PM (#36867550)
Because, even in a superconductor, current density isn't unlimited.

https://en.wikipedia.org/wiki/Critical_field

Re:The First Room-Temperature Ambient-Pressure Superconductor by thfuran on Tuesday July 25, 2023 @04:59PM (#36869440)
Global electric grids aren't on a common standard. They're not all the same frequency or voltage, so you can't just wire them together. And changing over would be a mess. MRIs require very high field strength that this superconductor likely cannot sustain.
Re:The First Room-Temperature Ambient-Pressure Superconductor by benlivengood on Tuesday July 25, 2023 @05:19PM (#36869756)
But the interties between grids are often high voltage DC which would work fine between incompatible AC grids. I think, but am not sure, that you'd always want DC superconducting transmission lines to avoid inductive losses.
Re:The First Room-Temperature Ambient-Pressure Superconductor by hinkley on Tuesday July 25, 2023 @05:01PM (#36869459)
You could also build power transformers that are more efficient. Transformers can be up to 95-98% efficient when running at their ideal power levels, but those numbers fall off when they are operating outside of that range. So you're probably looking at an almost 10% reduction of power usage by electronic equipment even before you get to making superconducting integrated circuits.
Re:The First Room-Temperature Ambient-Pressure Superconductor by toast0 on Tuesday July 25, 2023 @05:21PM (#36869779)
> Specifically you could lay undersea superconducting cables around the world and rely on a global electrical grid which allows for nearly 100% solar generation.

Not really, when the sun is up over the Pacific ocean, there's not that much sun over land. Maybe a global grid happens anyway, but cabling losses aren't the only source of cost, so I'd put my money on more localized improvements.

Better interconnection between and within local grids (maybe a viable Tres Amigas interconnection, but even just better connections between sections of the major grids would help with grid management. Improvements in motors, MRIs, magnetic bearings, transformers, etc.

Re:The First Room-Temperature Ambient-Pressure Superconductor by abtinf on Tuesday July 25, 2023 @01:44PM (#36866313)
There is no substitute for infinite.
Re:The First Room-Temperature Ambient-Pressure Superconductor by downWidOutaFite on Tuesday July 25, 2023 @07:02PM (#36870940)
Infinities never survive when transitioning from research to engineering.
Re:The First Room-Temperature Ambient-Pressure Superconductor by sigy on Tuesday July 25, 2023 @01:47PM (#36866374)
EMF becomes a fungible energy medium. Imagine storing energy in a field, just as we do with MRI machines, momentarily in the poles of motor windings, essentially anything inductive, or that operates as an electromagnet. Apart from dielectric losses and other environmental factors that are inescapable, the magnetic field becomes elastic like air [in] a balloon. The potential for this to modify energy consumption patterns is mind-boggling.

[edit: typo]

Re:The First Room-Temperature Ambient-Pressure Superconductor by HDThoreaun on Tuesday July 25, 2023 @02:06PM (#36866726)
Don't superconducting magnets make fusion much easier?
Re:The First Room-Temperature Ambient-Pressure Superconductor by adrianmonk on Tuesday July 25, 2023 @02:13PM (#36866849)
It could potentially change energy storage. Superconductors with refrigeration are already used for this, but only in niche applications.

https://en.wikipedia.org/wiki/Superconducting_magnetic_energ...

I'm not an expert, and everything that follows comes from a quick reading of this Wikipedia article.

It seems like (counter-intuitively) refrigeration isn't a significant cost compared to all the other stuff that's necessary. So at first glance it seems like high-temperature superconductors might not make a big difference.

However, that Wikipedia article does say this:

> The critical temperature of a superconductor also has a strong correlation with the critical current. A substance with a high critical temperature will also have a high critical current. This higher critical current will raise the energy storage exponentially. This will massively increase the use of a SMES system.

Right now, superconducting energy storage has a lot of advantages, but it doesn't have very good energy density (by mass). Not even a tenth of what lithium-ion batteries have. I assume you couldn't power a car with it. But it has some compelling advantages in other areas. It has unlimited charge/discharge cycles. It has zero self-discharge. It has unlimited (in theory) power density, so you could charge or discharge it arbitrarily fast.

Depending on what the energy density ends up being, it might suddenly become way more useful. It would have to be a gigantic leap in energy density, though.

Also, not needing refrigeration could potentially open up smaller scale applications. Maybe you could have a residential superconductor storage system for your solar panels. (Although I don't know about its safety, so maybe not.)

All this assumes the cost to build it is reasonable compared to other alternatives, that the discovery is real, etc.

Re:The First Room-Temperature Ambient-Pressure Superconductor by jakedata on Tuesday July 25, 2023 @01:30PM (#36866047)
I was with them until I came across Figure D on page 7. It uses Comic Sans and calls the entire paper into question.

Please note: this comment is an attempt at humor. Various people seem to have a difficult time discerning humor or sarcasm and choose to downvote. It is also possible (but unlikely) that I am not funny.

Re:The First Room-Temperature Ambient-Pressure Superconductor by tomashubelbauer on Tuesday July 25, 2023 @01:41PM (#36866264)
Neither humor nor sarcasm advance interesting conversations on their own IMO.
Re:The First Room-Temperature Ambient-Pressure Superconductor by jakedata on Tuesday July 25, 2023 @02:11PM (#36866824)
And yet humor and sarcasm can add spice to the conversation. I really did read the entire paper at the level of detail that allowed me to spot the inconsistency in the font. That was not made up, was substantive and should be corrected before it goes to print.

The PS was also very real as the grandparent gets buried under downvotes.

Re:The First Room-Temperature Ambient-Pressure Superconductor by vpribish on Tuesday July 25, 2023 @03:46PM (#36868296)
room temperature superconductor does not need 'spice', save the clowning for something trivial
Re:The First Room-Temperature Ambient-Pressure Superconductor by abecedarius on Tuesday July 25, 2023 @02:02PM (#36866665)
Scientific discoveries since 1923 include quantum mechanics, just for the first 1920s discovery to come to mind.

Still it'd be a prime new part of "living in the sci-fi future" for me.

Re:The First Room-Temperature Ambient-Pressure Superconductor by yreg on Wednesday July 26, 2023 @06:19AM (#36875325)
Also antibiotics, DNA, personal computers
Re:The First Room-Temperature Ambient-Pressure Superconductor by carabiner on Tuesday July 25, 2023 @02:08PM (#36866774)
South Korea has been desperate for a Nobel prize for a long time. Don't be surprised if they jumped the gun for a false exciting result for national pride.
Re:The First Room-Temperature Ambient-Pressure Superconductor by Workaccount2 on Tuesday July 25, 2023 @02:30PM (#36867119)
You're not gonna get a noble prize for unverified results.
Re:The First Room-Temperature Ambient-Pressure Superconductor by carabiner on Tuesday July 25, 2023 @02:32PM (#36867152)
Ya no shit. Desperation makes people do dumb things.
Re:The First Room-Temperature Ambient-Pressure Superconductor by distortionfield on Tuesday July 25, 2023 @04:10PM (#36868627)
You think this team would jeopardize their reputations by faking this data with such easily verifiable and thus refutable claims?
Re:The First Room-Temperature Ambient-Pressure Superconductor by whiskeytuesday on Tuesday July 25, 2023 @04:55PM (#36869374)
I mean that's almost exactly what happened with cold fusion, not faking so much as convincing yourself. What's the Feynman quote? "The first rule is do not fool yourself and you're the easiest person to fool" - something like that anyway.
Re:The First Room-Temperature Ambient-Pressure Superconductor by kjs3 on Tuesday July 25, 2023 @05:00PM (#36869445)
Re:The First Room-Temperature Ambient-Pressure Superconductor by distortionfield on Wednesday July 26, 2023 @08:02PM (#36886919)
Fair point. I’m just waiting for reproduction, like everyone else. We’ll know soon enough.
Re:The First Room-Temperature Ambient-Pressure Superconductor by mrguyorama on Tuesday July 25, 2023 @05:57PM (#36870163)
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC1892198/

It's absolutely a possibility in the space of this situation. However, any judgement, positive or negative, should be withheld until other labs and people claim to reproduce or not.

Re:The First Room-Temperature Ambient-Pressure Superconductor by laverya on Tuesday July 25, 2023 @06:00PM (#36870217)
It's almost happened before! https://youtu.be/nfDoml-Db64
Re:The First Room-Temperature Ambient-Pressure Superconductor by zardo on Tuesday July 25, 2023 @03:52PM (#36868380)
I don't think mistake is a possibility. If it doesn't superconsuct at room temperature, the photo of it levitating has to be faked.
Re:The First Room-Temperature Ambient-Pressure Superconductor by tigershark on Tuesday July 25, 2023 @06:49PM (#36870813)
There is also a video posted above from where the photo is taken and it doesn’t look fake.
Re:The First Room-Temperature Ambient-Pressure Superconductor by frognumber on Tuesday July 25, 2023 @05:22PM (#36869803)
No. It's not. The impact won't be bigger than, say, the jet engine (1935), nuclear power (1951), the computer processor (???), the internet (???), DNA (1953), or many others.

The past century has had a lot going on.