"oh what kind of turntable do you have? oh that's not good enough, there's your problem right there."
"what speakers do you have? what about your phono + power amps? oh that's not good enough, there's your problem right there."
"how did you place your speakers? oh, you should have them at 45 degrees, not 60."
"is it a re-pressing? from whom? oh, there's your problem right there."
The end result is a bunch of nerds ruining their credit scores because someone told them they need gold-plated hydraulic bearings in their tonearm to properly listen to their mom's copy of Led Zeppelin IV.
Does it sound different? Yes. Does it sound better? If you're really trying to get the most out of the music itself, no. Warm ⊄ good.
Vinyl is great because you aren't just listening to music. The medium demands something from you. It's tactile. The album artwork is a complete ensemble, rather than a little icon on your phone. In my case, I had to put in effort to restore the equipment I play my records on, so there's a bit of pride in it. It's a more intimate experience.
The next month he reviewed a different player. He basically retracted his opinion of CDs but said the player from the previous month was obviously terrible, at least the particular one that he did his review on, if not the entire brand.
And for audiophiles themselves, I notice many of them seem to have very poor taste in music. Like do you really need $50,000 of equipment and sand weighted speakers that weigh 700 pounds each to play 1968 bachelor pad music?
He could have been right both times. Many early CDs were just plain awful. Same with the first couple of generations of CD players, even some pricy ones. The early development of MP3 and other lossy audio codecs recapitulated the history of digital audio pretty well: lots of truly crappy recordings got passed around.
Like do you really need $50,000 of equipment and sand weighted speakers that weigh 700 pounds each to play 1968 bachelor pad music?
I've never understood audiophiles. How can it make sense for me to spend more money on my equipment than the freaking recording studio spent on theirs? Do these people think studios use $10,000 power cords on their sound boards, and atomic clocks to drive their ADCs?
Great response and critique until that point. I'm old (52) enough to have seen quite a few media changes too. I recall that when you were off your tits at a party, and discussing music, you tried to find common ground. That could lead to some impressive contortions!
Can't say I ever spent much on playback hardware. I generally went second hand for speakers/amps etc. Once the Walkman was invented and then rather a lot of Chinese (and other copies were available) clones appeared then you could ruin your hearing close up with seriously decent quality sound on the move. I was still walking around with a mini cassette player with wired ear plugs in my jacket's breast pocket until around 1993ish.
I did lay out something like £200 on a pair of decent headphones for use at home. They make anything from O Fortuna to Ghost Town via say Schehehererherereherezade, Finlandia and One sound rather ... Special.
It is different than someone who appreciates music, which it seems like you do.
It's so fascinating to me that an inert physical disc is engraved with sound waves that are reproduced by dragging something along to return them to sound, in the case of the 78s without the need for anything electrical in between. It's an added bonus that it has zero opportunity to inspire screen time for my kid, who absolutely doesn't need to stare at a screen while listening to music.
For fully mechanically recorded records you have to go back to pre-1927 Edison Diamond Disks. Or the real deal, Edison cylinders.
Edison cylinders are actually rather good recordings. The mechanical playback system. with no amplifier, introduced most of the distortion. Modern playbacks, using a modern record pickup with a suitably large-sized stylus, are quite good. Here are some from cylinders made around 1900.[1] Those include Sousa's band playing Sousa's marches, led by Sousa himself.
The ultimate playback device is IRENE. This was built for the Library of Congress. It does a full 3D scan of the entire disk or cylinder surface, and a detailed 3D model of the surface is created. That's turned into audio by a program that simulates a stylus tracking through the grooves. IRENE is used on very old, fragile items. It's even possible to put broken shards back together in 3D and recover the audio.
For real authenticity, there are reproducing pianos. These are player pianos, but with a better recording system, one capable of recording key pressure while a live pianist played the piano. While the Duo-Art system had binary-coded pressure values, the Welte-Mignon system was analog. Mostly. Here's a Welte-Mignon roll being played.[2] The holes at the outer edges of the roll are encoding the key pressure. The ones in the middle indicate which keys. MIDI, from over a century ago.
If you're going to go retro, go all the way. If you just want to listen to music, it doesn't get any better than 24 bit audio. (16 bits may not be enough for really soft passages, where all the high bits are zero and you may be down to 6 bit audio.)
[1] https://www.nps.gov/edis/learn/photosmultimedia/recordings.h...
My grandpa used to tell me that they donated the clockwork out of their record player as scrap metal for the war effort, so they listened to music by spinning the records by hand and holding a fingernail in the groove. That's something you can't do with pretty much any other recorded medium, aside from print.
Loading a record is quite the event: slip out of the card sleeve, then slip the dic out of the waxed paper sleeve and pop it on the spindle without scratching it. There is of course the correct way to handle them that if you are around or older than my age (52), you already know - the delicate fingers on the rim and your thumb on the centre.
I can remember my Dad going to the "biggest NAAFI in the world" (Rheindahlen) and coming back with a brand new record player in around 1978 or 79. This thing could handle something like five LPs at once and play them sequentially.
Pissing around with Spotify isn't quite the same and I do understand why people enjoy the theatrics but to be honest: I turned my CDs into FLACs and ditched the tapes a long time ago. I still prefer to buy my music by the CDROM and rip it to FLAC or mp3 or whatever - now that is me showing my age!
It’s very convenient especially now that lossless is an option.
I hope we get plenty of warning before they axe it. Imagine that being a google service?!
Sometimes especially on Zoom I look at my cabling and think it's amazing that images of other people and their voices are going through that cable.
Only on Zoom and similar video conferencing. For all other uses I don't even think about it.
Hilarious and well put! Speaking as an erstwhile musician, this has been my theory about Guitar Center's business model since the 90s.
Nowadays I can get excellent audio quality watching good Youtube videos or streaming from my preferred music site (I only listen through headphones now).
I'm super glad I was able to get to the quality level I liked for fairly cheap.
For the record, I like your approach to music enjoyment.
The other thing I like is that it really takes more effort to put on a record than start a track on Spotify. I really only do it when I can take the time to do so. Pick a record from the shelf, carefully take it out of the sleeve, carefully put it down on the turntable, and then really listen to a full record while sitting or lying on the couch doing nothing else. Again nothing you couldn't do with Spotify or YouTube music, but somehow you (well, at least I) never do.
Vinyl _does_ also provide a nice soft upper limit to the loudness wars.
Assuming this is correct, and that the digital mix intended for cds or streaming/downloads outside vinyl's range, you might be able to filter the digital mix to fit in vinyl's range and that might approximate the vinyl mix, but maybe the mastering engineer would make different choices (of course, maybe they just use a filter). It'd be interesting to explore with actual data.
I like not having to flip the record halfway through, or being able to listen to "The Wall" without 3 flips.
That's a great way of putting it! And something I hadn't considered before I bought a record player and started listening to it. There's that point in time where you realize the A-side is done, you get up to go and flip it, and you have a half-minute or so of reflection on the first half. Then the B-side starts and it's like the second act of a play is starting after intermission.
But some vinyls actually come from a digital master anyway.
I have a ton of vinyl records myself, never understood why anyone would say they sound better. Vinyl is a compressed format, even if the compression is analog. There is significant loss of signal in the whole signal chain. You need to do reverse RIAA (compression), then you fabricate a master, then you press vinyl from this master which is only good for a few thousand presses, then you have the pickup and at last the RIAA preamp (decompression)...
> But a few specialty houses (...) have long advocated for the warmth of analog. “Not that you can’t make good records with digital, but it just isn’t as natural as when you use the original tape,” says Bernie Grundman
which is absurd. "Warmth" is a kind of distortion, and if a signal is distorted then it's less accurate or "natural"!
They can't claim "fidelity" and "warmth" at the same time. It's one or the other.
So "fidelity" means "fidelity to the way I remember" (and like).
Just like people buying yellow lightbulbs because that's how incandescent bulbs used to always be -- actual natural sunlight isn't that yellow. Good LEDs are more "natural", but less "familiar" to people.
Only if it’s pushed into distortion.
Guitar players (generally) like tube Amos because of the way they distort compared to transistor amps.
If you are not pushing the amps into distortion, they will only sound different if they’re badly designed.
Ultimately, this boils down to signal which vibrates speakers. As a thought experiment, if you use some kind of theoretically perfect surface-sampling laser to capture every movement of the speaker surface at sufficient frequency and fidelity to reproduce all of the information in the original signal and speaker surface vibrations (ala Shannon->Nyquist), then a digital playback of that signal which vibrates the same speaker surface identically will sound exactly the same.
Individuals can prefer different sonic characteristics encoded in an output but that's an aesthetic choice. The entire signal chain creating that output is the result of creative and technical choices. It goes from guitar string to studio acoustics to microphone to mixing board to outboard processing gear to recording medium to duplication to distribution to playback to amplifier to speakers to room acoustics to human ear. Most of those elements significantly color the sound. Yes, mistakes can be made in the downstream signal chain which diverge from the creative intent. However, those mistakes are exceptions, and not inevitable. Done correctly, there's no reason a digital step in the chain shouldn't be completely undetectable.
I find that listening to one of three different sources (earbuds, gaming headset which is EQ'd via open source software, and inexpensive-but-fancy headphones) causes me to adjust to that particular set of headphones' sound. It seems to be like the equivalent of our brain continuously auto-white-balancing our vision.
Physics doesn't care about people's beliefs, but sadly many people also don't care about physics.
In practice, if I give you a random analog box, transforming it into an accurate DSP algorithm it's an extremely difficult problem.
Which is why people instead of doing that, they recreate the "idea" (reverb, delay, ...) digitally, but it's not a copy.
The popular Kelvin Tone Shaper https://www.toneprojects.com/kelvin-tone-shaper.html
Maybe you want tape? London Acoustics Tapei https://www.londonacoustics.com/product/taipei-studio-tape-r...
As for freeware, the comeback of Variety of Sound with https://varietyofsound.wordpress.com/2021/11/30/tesslase-mki... or the less subtle https://kitplugins.com/pages/burier-free
This is just a part of (good) saturation plugins from 2021...
This says nothing about the difference between analog and digital recording media unless you think that disc lovers shun solid state electronics or something like that. Do they?
There wasn't much digital sound around when McLuhan said that "The medium is the message." I think that's the substance of this whole brouhaha. What's wrong with rejecting digital media when one deplores the inundating tide of changes in society's tempo, cultural content, aesthetics, and forms of dis-function that have been carried so far and wide by digital media? Isn't change always impugned?
Though I would expect it'd be more of an eq profile thing.
https://www.analogueseduction.net/record-clamps/SHUNMOOKprod...
You cannot, it is impossible.
Even with an unrealistically low sample rate (say 500Hz instead of 44.1kH), this will not sound like 500 beats per second as the "steps" occur, but rather will just sound extraordinarily dull, as the Nyquist frequency has dropped to 1kHz, a fairly low tone, and all info above that has been lowpassed away.
When the signal is changed to analog by the DAC in order to come out of a speaker, the "steps" become smooth curves like any analog waveform. You cannot hear "digital steps" because they cannot be audible - sound is vibration, and it cannot be made into steps in the analog realm.
what is bassy reverb?
I know this was a typo, but tools like https://shop.audified.com/products/mixchecker (with a literal "sedan" button) and articles like https://ask.audio/articles/the-final-mix-using-your-car are sadly indicative of the emphasis in modern mastering on sounding good on car speakers - which is the entire problem in a nutshell.
modern mastering does take into account a highly popular listening environment, to ensure that the mix sounds good there as well.
the second article you posted is talking about using a car as one of several environments in which to test a mix. because it’s a “known” reference in a real-world environment (your ears are used to listening to mastered music on a car stereo).
I love listening to vinyl. But I’m not gonna lie to myself and say “it sounds better”. The engineer/scientist in me knows it doesn’t, and the pragmatist/experimentalist in me knows that even if I can reliably detect differences between a good digital recording and a good vinyl copy of a song (which I’m not convinced I really can) there is nit nearly enough difference ever to say one is better than the other.
I like the ceremony of playing vinyl. It adds to my enjoyment, but in the kind of way that a Japanese tea ceremony “improves the taste” of tea.
Also, a long time back I realised that listening to hifi _gear_ leads only to criticism and unhappiness, while listening to great music leads to joy. So I mostly have given up critically listening to “gear”. A great song or album can be a thing of joy coming out of your laptop speakers. Coltrane or Ellen Allien or Polyphia are no less amazingly talented in shitty phone earbuds compared to my thousands of dollars of living room hifi. I’m too old to want to argue about “clarity of soundstage” or “time alignment in the tweeter crossover”, I just want to rock out or dance or groove along to great tunes. I can do that with a 100% analog signal path in my lounge room, or in cheap Bluetooth earbuds inside my motorcycle helmet with a 97db noise floor…
Anyone with basic understanding of A/D conversion and sampling theory will understand that you can always exceed analog with digital, given enough bits (and 2*16 @ 44.1 kHz is already pretty darn good).
In the early days of MPEG Audio, Level 2 (not mp3) I spent a lot of time listening to samples and I was taken aback when I finally traced flaws back to the CD itself (Cranberries, Zombie, 1994). Many of the early CDs really weren't that great, but that wasn't due to being "digital", just a sloppy production.
Other analog broadcast and recording media have similar curves, called pre- and de-emphasis.
Digital doesn't need it because it has effectively zero distortion, and dynamic range to spare.
An advantage of vinyl is that there's a physical deliverable, making it possible to monetize it. I think that's why a lot of indie bands use vinyl.
I go to a lot of "indie" performances, and have the musicians directly: How do I buy your stuff, so you make the most money? The answer is always the same: Buy the CD right here.
Reminds me of the LP my band teacher in high school had. It was the 1812 overture, and the groves for the cannon shots at the end were easily distinguishable with just a casual examination. Based on what you're saying, I suspect that recording was pushing the limits of vinyl.
With the satisfying full warm tone vinyl is known for.
I was a drum and bass dj when it was all still vinyl. Even in a club with huge speakers, I've never seen the needle jump due to the bass (although some places used to tape a penny to the top of the headshelf). The weighting on the tone arms can be adjusted so if you've got a needle dancing around it's due to your set up, not the bass, or Jungle music wouldn't have lasted too long.
I've tried Sound Source and not only do the eq's work, but I can boost the volume so I'm listening at 6/10, where before I was at 9/10 and had no headroom.
I knew I'd get an answer by saying something wrong on the internet.
I was jailbroken on iOS 14 for the longest time solely for a system-wide equalizer for Apple Music. With a new phone it's a major step back, and I've switched to Spotify for their (worse) equalizer and somewhat worse overall experience (Spotify doesn't even have an equalizer on desktop!)
It's really unfortunate that such a straightforward feature is so limited on Apple platforms, and for no discernible reason.
Settings -> Accessibility -> Audio/Visual -> Headphone accommodations
I also have the latest AirPod Pros. With Apple Music, they are not too bad, but Apple is preventing me from having enough volume. I switched to Tidal - the sound is better, and their overall audio out level is higher than Apple. (Tidal also has notes on the music and the bands like the liner notes in the old days.) I tried Idagio, but their output level is even lower than Apple's Music. Basically, I couldn't hear the music well enough to bother with them.
If I play music on my sound system at a comfortable level, and ask people, "Is it too loud for you?", they say, no, it's fine.
The other problem I have with the AirPod Pros is their transparent mode doesn't provide any gain or much EQ for external sounds (even with the audiogram), so I can't hear people nearly as well as I can with my cheap hearing aids. I still have to remove the AirPods and put my hearing aids on, if I want to talk with people in anything but a silent room.
What I need more than anything else is compression. I can hear loud sounds fine - in fact, they bother me. What I can't hear any more is quiet sounds. That's what I need amplified, along with treble boost to compensate for my aging ears.
Apple is really missing a market here for OTC hearing assist. They have all the tech needed, even already built into existing hardware - AirPod Pros are an engineering marvel. They are holding back for some reason, probably some contractural arrangement we're not aware of.
Sounds like if you combine the two steps you end up with the identity operator :)
signal -> [HF boost] -> [needle adds HF noise] -> [HF cut] -> same signal, less HF noise
As for the low end, cutting the bass helps to control the size/excursions of the grooves, which are rather close together (https://groverlab.org/hnbfpr/2019-08-06-stereo-records.html).Dolby B for cassette tapes is the same idea (but only for the highs).
[0]: you can get very low tolerance resistors and capacitors, but they’ll cost you
> It's absolutely not possible to accurately record every digital recording onto vinyl.
Outlining an idempotent process of recording and playback does not help there.
You can simulate this pretty well with computer speakers. Turn down your audio outputs so that it's barely audible, then turn up the speakers as load as they'll go. Noisy, isn't it? In theory that should be the same as turning the outputs to their maximum clean level and turning your speakers way down, but in practice it's absolutely not. Well, every vinyl record made does exactly that to the bass.
There's a lot of weirdos out there, but these ones aren't hurting anybody.
It's not intellectually fine, only fine in the sense that it's well within the bounds of free speech.
Where you're getting pushback is that this thread is talking about vinyl records and tube amps, things where the noise and distortions introduced by their operation are well known, well documented, audible to anyone with normally functional ears, and regularly utilized artistically. These are not the inventions of grifters with a product to sell, it's just an older technology that is less precise in a certain predictable way which some people find pleasant.
The poster I'm replying to is then acting like it's some weird audiophile belief that records sound different from other media.
On the topic of the overall article, of course the people who believe a digital processing step makes things inherently worse are absolutely off their rockers.
“Not without a double-blind test you don't!”
This is what audio purists should be asking for. Let's pay the creative production team to create and release a high-fidelity digital mix optimized for us. No concerns about radio play, boomboxes or loudness wars. Just their original creative intent.
If you say that waving your hand over the shriracha while murmuring a magic incantation makes it taste better, then that may not be so intellectually fine any more.
In fact, part of the record player spec is the "RIAA equalization"[0] that attempts to account for the fact that vinyl isn't good at recording a wide range of frequencies well. On recording, you cut the bass and jack up the treble. On playback, you boost the bass and reduce the treble. Without that, vinyl would be even worse than it is today.
It's absolutely, 100% fine for someone to say that they subjectively prefer the sound quality of a record player to a CD. I don't, but that's fine: it's purely a preference thing. But to claim that vinyl is objectively better in some way is just ludicrous.
[0] https://en.wikipedia.org/wiki/RIAA_equalization