News for hackers. Stuff that matters.
Re:The Sound of Bells – The acoustics, sound, tuning and his... by pradn on Tuesday May 10, 2022 @12:30PM (#31329040)
Tarkovsky's Andrei Rublev has an extended sequence where a bellmaker's young son agrees to pour a bell for a local lord. You see the entire process of making the mould and pouring the metal. It has a town-fair atmosphere. But at the end, there's tremendous pressure on the young bellmaker to have the bell ring properly and have no cracks. And it does. The protagonist, the lapsed monk Andrei Rublev, regains his faith, seeing the result of the young bellmaker's hope.
Re:The Sound of Bells – The acoustics, sound, tuning and his... by aeolis_mons on Tuesday May 10, 2022 @12:36PM (#31329121)
One of my favorite sequences in any movie. I will never forget the visuals of workmen sweltering in front of flaming portholes in the bell's cast. Enduring a little inferno, to create the sound of heaven! Thank you for reminding me of it. :)
Re:The Sound of Bells – The acoustics, sound, tuning and his... by pradn on Tuesday May 10, 2022 @01:31PM (#31329835)
It's an unforgettable 40 minutes. So lucky to have seen it on the big screen the first time I saw the film.
Re:The Sound of Bells – The acoustics, sound, tuning and his... by scarecrowbob on Tuesday May 10, 2022 @03:25PM (#31331453)
I can't recall as it has been a number of years, but my impression was that the young bell maker was lying about his father having given him the "secret" to making the bell, hence the anxiety about the success of the project. Am I misremembering that, or was I just not reading it correctly?
Re:The Sound of Bells – The acoustics, sound, tuning and his... by gregsadetsky on Tuesday May 10, 2022 @05:27PM (#31332956)
That's exactly it -- https://www.villagevoice.com/2018/08/20/the-secret-of-andrei...

"The boy, named Boriska [...] claims that before his father died, he revealed to him the secret of casting a bronze bell"

"Amid his tears, Boriska reveals that his father never imparted to him the secret of bell making"

Re:The Sound of Bells – The acoustics, sound, tuning and his... by pradn on Tuesday May 10, 2022 @06:39PM (#31333604)
Yes, exactly. The father also died of a plague before they came to the son, if I recall.
Re:The Sound of Bells – The acoustics, sound, tuning and his... by lqet on Tuesday May 10, 2022 @12:17PM (#31328888)
Very cool. I became fascinated with bells after watching this [0] documentary on how they are made a few years ago (it's in German, but that hardly matters, just watching the process is extremely interesting).

The whole process is a combination of extreme sophistication and extremely simple tools and materials, something that has become quite rare nowadays. And despite an exact calculation of the bell shape and thousands of years of trial and error, tradition, and experience (the foundry in the video has been owned by the same family for 300 years), the cast is still highly dangerous and it still regularly happens that the bell just doesn't come out right and cannot be saved - months of work for nothing.

I think that explains why on the day of the cast (which is just 1 or 2 times per year), everyone involved is extremely nervous. The bell founder and the customer all join in prayer, and the cast traditionally starts with "in God's name" [1].

[0] https://www.youtube.com/watch?v=OQ8ZZV5UjcI

[1] https://youtu.be/OQ8ZZV5UjcI?t=1918

Re:The Sound of Bells – The acoustics, sound, tuning and his... by crustycoder on Tuesday May 10, 2022 @12:20PM (#31328917)
The only remaining dedicated bell foundry in the UK is in Loughborough - https://taylorbells.co.uk/ You can visit :-)
Re:The Sound of Bells – The acoustics, sound, tuning and his... by niccl on Tuesday May 10, 2022 @04:50PM (#31332523)
Little known fact: They made the AC/DC's original Hell's Bell for the Back in Black tour. Touring with 3,000 kgs of bell in a flight case made for some interesting experiences
Re:The Sound of Bells – The acoustics, sound, tuning and his... by ftio on Wednesday May 11, 2022 @08:41AM (#31339077)
Eh, in my experience that’s about the same weight as an old Ampeg SVT head.
Re:The Sound of Bells – The acoustics, sound, tuning and his... by dylan604 on Tuesday May 10, 2022 @03:21PM (#31331408)
Even with it being in German, I agree, I still enjoyed it. If you've ever made anything or seen a different thing made, you'll get the concepts of what they are doing. The scale of what they are making is impressive, as well as their jigs for building. Thanks for the link
Re:The Sound of Bells – The acoustics, sound, tuning and his... by crustycoder on Tuesday May 10, 2022 @03:32PM (#31331535)
The bells studied in the PhD thesis are primarily used for English Change Ringing, which started in the early 1600s and the compositions played on them (methods) are based on mathematics, specifically Group Theory, rather than being tunes in the normal sense - the aim is to ring all the possible permutations of the bells.

The Mathematics of Bell Ringing https://www.youtube.com/watch?v=44jXUo6KaVs

Performances (Peals) consist of 5040 changes (sequences), have a strict set of rules and take around 3 hours 15 minutes to complete, and must be rung entirely from memory, with no written aids.

In the early 1960s a CS algorithm for efficiently enumerating permutations was published, the Steinhaus–Johnson–Trotter algorithm. It's in Knuth, for those who have access to a copy. Unfortunately for them, it had been known by English Change Ringers as Plain Changes, since around 1621.

Re:The Sound of Bells – The acoustics, sound, tuning and his... by allisvancity on Tuesday May 10, 2022 @03:55PM (#31331843)
wow. had no idea bell-ringing was so... pathological
Re:The Sound of Bells – The acoustics, sound, tuning and his... by crustycoder on Tuesday May 10, 2022 @04:29PM (#31332251)
Yeah, it's full of geeks :-]
Re:The Sound of Bells – The acoustics, sound, tuning and his... by rwmj on Tuesday May 10, 2022 @04:36PM (#31332339)
I think you mean campanological.
Re:The Sound of Bells – The acoustics, sound, tuning and his... by crustycoder on Tuesday May 10, 2022 @04:43PM (#31332438)
Ooh no, don't ever call bellringers that, unless you want to cause grave offence. Campanologist is a name for wussy academics, bellringers ring bells. And drink beer ;-)
Re:The Sound of Bells – The acoustics, sound, tuning and his... by enriquto on Tuesday May 10, 2022 @11:48AM (#31328515)
As if there was just material for a single PhD thesis! I would guess that the mathematical theory of bells is pretty much open. The shape of a bell (a solid of revolution) can be described by one function u:R->R. Given u, you can compute the vibration spectrum of the sound by standard methos. But if you are given a desired timbre, how to find u? Nobody knows. The most that we can do is optimization starting from a close solution candidate.
Re:The Sound of Bells – The acoustics, sound, tuning and his... by Someone on Tuesday May 10, 2022 @12:15PM (#31328862)
> The shape of a bell (a solid of revolution) can be described by one function u:R->R

If you phrase it that way “surface of revolution” describes bells much better than “solid of revolution”.

I think “solid of revolution” is the better term, though. That allows you to model varying wall thickness. You’d need more than a function u:ℝ->ℝ to do that.

Also, I don’t a priori see why the shape of a bell would be limited to such functions. If the edge of a bell bends inwards into the bell and goes up a bit, I think I would still call it a bell, especially if it somewhat sounds like one.

Finally, rotational symmetry isn’t required for a bell. Your typical cow bell, for example, is elliptical or even rectangular (https://en.wikipedia.org/wiki/Cowbell_(instrument))

⇒ the design space is a lot larger than you indicate.

Re:The Sound of Bells – The acoustics, sound, tuning and his... by cpp_frog on Tuesday May 10, 2022 @12:48PM (#31329316)
Surface of revolution is 'okay', 'solid' would mean its interior is completely filled. What you're describing is an active area of research in numerical analysis (adjacent to my own MS thesis topic, buckling of shells).

> That allows you to model varying wall thickness

That's mentioned in the first chapter of this book [0].

[0] The Finite Element Analysis of Shells – Fundamentals, Chapelle & Bathe

EDIT: I'm aware it is not a surface, but the notion is closer than that of a solid of revolution.

Re:The Sound of Bells – The acoustics, sound, tuning and his... by Someone on Tuesday May 10, 2022 @03:34PM (#31331565)
> ‘solid' would mean its interior is completely filled.

I disagree. Mathematically, I wouldn’t know how to define a solid other than “anything with a volume”.

Certainly, a bell, when defined as a surface of revolution, doesn’t have an interior in a mathematical sense (https://mathworld.wolfram.com/Interior.html), does it?

There’s the convex closure, but that would, for the prototypical bell, add volume ‘outside’ the bell, too.

Also, I think varying wall thickness in bells for centuries was the only known way to tune them. https://en.wikipedia.org/wiki/Pieter_and_François_Hemony#Lif...:

“When struck, a bell produces a number of partials which, if imprecisely tuned, can create an unpleasant sound and which prevents it from harmonizing in accordance with other bells. To address this problem, the Hemony brothers gave their bells a particular profile and thickened it in certain places. The bells were then tuned by hollowing ridges from specific parts of the inner wall until the first few partials were acceptably in tune.”

(Aside: if you want your work to be used for centuries, becoming a professional bell caster seems a good bet)

Re:The Sound of Bells – The acoustics, sound, tuning and his... by nomel on Tuesday May 10, 2022 @01:45PM (#31330028)
> Surface of revolution is okay

But surface, by definition, has no concept of thickness, right? Surely there's a better term?

> 'solid' would mean its interior is completely filled.

I think the easiest way to define a bell would be the difference of two solids of revolution (front surface, back surface). What do you call the difference of two solids of revolution?

Re:The Sound of Bells – The acoustics, sound, tuning and his... by cpp_frog on Tuesday May 10, 2022 @01:57PM (#31330195)
I meant it from a numerical analysis/differential geometry perspective (the reason I attached the reference). While not being strictly a surface, it is characterized by a mid-surface, and a thickness t. After having that information, for each point in the mid surface, a normal vector is drawn and scaled by a magnitude of t/2 in both directions of the normal, giving a thickness of t to the object that, I should have made it clearer, is not a surface but characterized by one.
Re:The Sound of Bells – The acoustics, sound, tuning and his... by enriquto on Tuesday May 10, 2022 @03:19PM (#31331385)
I don't think that a bell is correctly modelled as a shell of variable thickness. The inner surface is smooth, and the outer surface has ridges. These ridges are apparently important to the timbre, thus it may be more appropriate to consider it as a solid volume of arbitrary shape. Of revolution, if you want to stay with a one-dimensional model.
Re:The Sound of Bells – The acoustics, sound, tuning and his... by crustycoder on Tuesday May 10, 2022 @04:31PM (#31332278)
Nah, the mouldings are entirely decorative. And bells are tuned by taking off material on a lathe at various positions on the inside of the bell.

https://funwithbells.com/nigel-taylor/

https://www.youtube.com/watch?v=JEJkMalMVv4

Re:The Sound of Bells – The acoustics, sound, tuning and his... by enriquto on Tuesday May 10, 2022 @05:21PM (#31332891)
Wow, it's good to know, thanks for the clarification!
Re:The Sound of Bells – The acoustics, sound, tuning and his... by a1369209993 on Tuesday May 10, 2022 @03:20PM (#31331400)
> You'd need more than a function u:ℝ->ℝ to do that.

Actually, if you normalize the bell height to 1, you can take u from 0 to 1 as the inner surface (tracing down from the top), and u from 1 to 2 as the outer (tracing back up from the bottom). I'm not sure that's mathematically convenient, but it does work. (You could also use a periodic function on 0..pi for inner and pi..tau for outer, which might be nicer math-wise and also allows you to say that the height (pi) is half of whatever the function's period is.)

Re:The Sound of Bells – The acoustics, sound, tuning and his... by mellavora on Wednesday May 11, 2022 @03:33AM (#31336889)
I've got a fever, and the only prescription is more cow bell!
Re:The Sound of Bells – The acoustics, sound, tuning and his... by cpp_frog on Tuesday May 10, 2022 @12:54PM (#31329375)
Yes, it's a vibration of an elastic axisymmetric thin shell (surface of revolution, as you meantioned). Going deeper into the theory, to know or characterize the sound it makes one should have a model of free or forced vibration and find the eigenvalues of the resulting linear system. That system is typically (K-omega^2 M) U = F, where K is the stiffness matrix of the material, M the mass matrix, U the displacement matrix, F the force matrix and omega the frequency.

Now, to find the displacement given the eigenvalues (spectrum) is possible in a finite-dimensional setting, in infinite dimensions it's trickier. I'm sure there are approximation results of this kind, but not if there is an exact way.

Re:The Sound of Bells – The acoustics, sound, tuning and his... by sitkack on Tuesday May 10, 2022 @04:22PM (#31332171)
If drums are bells, you should see how Nicolas Bras [1] modifies the sound by damping some of the nodes of the drum. Are you saying all bell are radially symmetric?

[1] https://www.youtube.com/watch?v=fXavtyyyj34

Re:The Sound of Bells – The acoustics, sound, tuning and his... by nonrandomstring on Tuesday May 10, 2022 @12:50PM (#31329332)
This site is quite old and IIRC I had bachelors students building additive synthetic bells from the amazing data he's collected. Also great tales of acoustic archaeology, building bell sounds based on models from the foundry drawings and metallurgy data.
Re:The Sound of Bells – The acoustics, sound, tuning and his... by crustycoder on Tuesday May 10, 2022 @02:12PM (#31330418)
It's been around for a while but he's still active in the field (he recorded & analysed our bells a couple of years ago) and he's revamped the site fairly recently.
Re:The Sound of Bells – The acoustics, sound, tuning and his... by hprotagonist on Tuesday May 10, 2022 @11:53AM (#31328597)
The pitch perception work alone is probably a few degrees, if you get deeper into it.
Re:The Sound of Bells – The acoustics, sound, tuning and his... by crustycoder on Tuesday May 10, 2022 @11:59AM (#31328665)
Yes, Bill did. He's a really nice guy and the subject of bell tuning has been of academic interest for a very long time, because they don't produce a single note and the note you "hear" isn't produced by the bell at all. See for example Nobel Laureate Lord Rayleigh's paper of 1890, linked to on Bill's site.
Re:The Sound of Bells – The acoustics, sound, tuning and his... by krumbie on Tuesday May 10, 2022 @12:05PM (#31328745)
That is fascinating. I thought that bells had one or a couple dominant / loud frequencies that would mostly determine pitch, and the rest would just mix in to change the timbre but not the main percept. I always found the sound of melodies played with bells kind of uncomfortable because there is too much going on, too many different frequencies interfering with each other.
Re:The Sound of Bells – The acoustics, sound, tuning and his... by crustycoder on Tuesday May 10, 2022 @12:18PM (#31328905)
For literally centuries European bell tuning was all done by rule of thumb, with results varying from to sublime to abysmal. It was all finally figured out by Canon Simpson in 1895/6 who described the relationship between the 5 main components of a bell's strike note - the hum, prime, tierce, quint and nominal.

https://www.hibberts.co.uk/building-a-bell-sound/

Re:The Sound of Bells – The acoustics, sound, tuning and his... by itsoktocry on Tuesday May 10, 2022 @12:17PM (#31328895)
An interesting podcast on bells form Planet Money:

When you've got two companies down the road from each other making the same thing, you can almost guess the history. Originally there was just one company, but something happened. Maybe someone got angry, somebody left, and they started a second business, a competitor.

Today on the show, the rivalry between two companies that make nearly all the world's handbells. And how they eventually made peace.

https://www.npr.org/2021/12/23/1067333584/bell-wars-classic

Re:The Sound of Bells – The acoustics, sound, tuning and his... by raymondgh on Tuesday May 10, 2022 @12:41PM (#31329183)
“Someone wrote a PhD thesis on bells” is a clickbait title. It implies the value of the content is merely the surprising or shocking concept that the content even exists. But looking at the page, that’s not what the content is about. It’s an earnest study into bells. Are we meant to point and laugh?
Re:The Sound of Bells – The acoustics, sound, tuning and his... by belkarx on Tuesday May 10, 2022 @01:17PM (#31329659)
I agree, title was a bit clickbait but I was surprised that one would dedicate their life to something that specific. Hyper-specialization at its finest, and the passion is something I can appreciate
Re:The Sound of Bells – The acoustics, sound, tuning and his... by WhyOhWhyQ on Tuesday May 10, 2022 @02:15PM (#31330464)
'Bells' are pretty un-specific as far as specialization goes. The average person actually knows what a bell is. The PhD theses in mathematics are likely far less applicable and far more specific. Check out the titles on arxiv and let me know if you think any of these are less specific than 'bells'.

https://arxiv.org/list/math/new

Re:The Sound of Bells – The acoustics, sound, tuning and his... by twangist on Tuesday May 10, 2022 @02:06PM (#31330324)
The doctoral candidate didn't "dedicate their life" to the topic, merely wrote a thesis on it. So, just an intense part of their life. Perhaps they'll remain focused on bells, perhaps not. Probably all PhD theses are 'hyper-specialized', unless they're surveys by an author who won't be continuing as an academic researcher. It's not surprising that people would want to understand these complex inharmonic sounds we've been making for centuries.
Re:The Sound of Bells – The acoustics, sound, tuning and his... by belkarx on Tuesday May 10, 2022 @06:51PM (#31333692)
I mean ... they continued their work on bells, and appear to have done (and continue to do) a fair amount of work concerning them
Re:The Sound of Bells – The acoustics, sound, tuning and his... by pvg on Tuesday May 10, 2022 @01:22PM (#31329712)
You should still stick to original titles like the site guidelines ask
Re:The Sound of Bells – The acoustics, sound, tuning and his... by belkarx on Tuesday May 10, 2022 @01:27PM (#31329790)
Ah, apologies. I will keep that in mind in the future
Re:The Sound of Bells – The acoustics, sound, tuning and his... by dang on Tuesday May 10, 2022 @03:43PM (#31331684)
Thanks! We've changed the title above to the page title now.

The submitted title was "Someone wrote a PhD thesis on bells". Sometimes a title like that has the virtue of getting an obscure, interesting submission onto the front page. The sin is venial when the submission is particularly good (and mortal when it's dreck, which alas is more often the case.)

Re:The Sound of Bells – The acoustics, sound, tuning and his... by enriquto on Tuesday May 10, 2022 @05:29PM (#31332972)
> Hyper-specialization at its finest

Don't be so sure. At least for mathematicians, the "bell" may be just an excuse to make the subject cool. Many of the underlying problems are very general. For example, the inverse spectral problem (vibration modes of a complex shape) is the basis of the interaction between proteins, enzymes, and the huge molecules of cell walls. At the cell scale, Brownian motion shakes everything in all possible frequencies, but molecules can only vibrate at a specific set of frequencies (their spectrum). The act of "matching" different molecules happens when they have some common frequencies, often with localized modes of vibration.

You may think that you are just modeling church bells, but everything that you do has immediate application to the understanding of some organic chemical interactions, which are a deep mystery yet.

Re:The Sound of Bells – The acoustics, sound, tuning and his... by skocznymroczny on Tuesday May 10, 2022 @01:11PM (#31329585)
I thought it's clickbait because I expected that the text of the thesis was etched on the bells somehow.
Re:The Sound of Bells – The acoustics, sound, tuning and his... by misterprime on Tuesday May 10, 2022 @05:18PM (#31332855)
Nice joke, Dad.
Re:The Sound of Bells – The acoustics, sound, tuning and his... by crustycoder on Tuesday May 10, 2022 @12:47PM (#31329292)
I wouldn't worry, if that was the intent, I think it backfired ;-)
Re:The Sound of Bells – The acoustics, sound, tuning and his... by blipvert on Tuesday May 10, 2022 @02:50PM (#31330984)
I wrote a lot of my undergraduate dissertation on Bell’s too. Maybe that’s why I got such a poor degree.
Re:The Sound of Bells – The acoustics, sound, tuning and his... by jmmcd on Tuesday May 10, 2022 @12:00PM (#31328682)
Bells is also one of the sub-themes in the Polifonia EU-funded research project (disclaimer, I'm involved in a different theme). It's more about documentation of historical bells in open/linked data, rather than acoustics.

https://polifonia-project.eu/

Re:The Sound of Bells – The acoustics, sound, tuning and his... by crustycoder on Tuesday May 10, 2022 @12:11PM (#31328818)
In the UK we have 61,626 documented bells (a lower bound) spread across 7,148 towers. https://dove.cccbr.org.uk

In the last year unaffected by COVID, there were 10,701 recorded performances and many more unrecorded ones and practices. https://bellboard.uk/

There are 23,397 Methods and 52,650 Compositions available, where a Method is roughly equivalent to a piece or song in traditional music terms. http://methods.ringing.org/intro.html

Re:The Sound of Bells – The acoustics, sound, tuning and his... by Veen on Tuesday May 10, 2022 @12:25PM (#31328980)
I used to enjoy listening to the church bell practice sessions on summer evenings when I lived by a church (not so much being woken on Sunday mornings though). Annoyingly, they eventually shortened and lessened the frequency of practice because newcomers to the village complained that their idyllic second home in the countryside was affected by "noise pollution"— something that has been a regular feature of village life since the bell tower was built in 1545.
Re:The Sound of Bells – The acoustics, sound, tuning and his... by crustycoder on Tuesday May 10, 2022 @12:39PM (#31329155)
The UK government did promise to reduce the grounds for noise complaints about church bells, on the grounds that normally they were there before the complainant arrived, and would still be there long after they were gone, but it appears it was like many government promises...

https://www.churchtimes.co.uk/articles/2018/2-february/news/...

Re:The Sound of Bells – The acoustics, sound, tuning and his... by trasz on Tuesday May 10, 2022 @01:07PM (#31329541)
“The church bells had chimed unchallenged every 15 minutes since 1779.”

Over _all the night_. Seriously, this appears to be quite a rational complaint.

Re:The Sound of Bells – The acoustics, sound, tuning and his... by crustycoder on Tuesday May 10, 2022 @02:23PM (#31330559)
There's usually two different things going on in UK bell towers - bell ringing which involves ringing the bells full-circle using the internal clappers, and clock chiming which uses external hammers driven my the clock. The clock chiming is much quieter than change ringing.

Ours only chimes on the hour but it's going 24/7 and is very close to the surrounding houses (~40m) some of which are uphill and directly in line with the bells. I had to go in today to fettle it as it wasn't chiming and someone had posted on the village FB group that they were missing it. That's a fairly regular occurrence, most people people like hearing them, even through the night. Any complaints we get are when the clock stops.

It is possible to modify clocks to stop them chiming overnight, although ours is still in its entirely mechanical 1883 form, including me having to wind it every week.

Re:The Sound of Bells – The acoustics, sound, tuning and his... by trasz on Tuesday May 10, 2022 @02:53PM (#31331017)
If people want this, then it should be fine. To me, in case described in the article above the bells were to stay because of the church and tradition, not because the citizens wanted them.
Re:The Sound of Bells – The acoustics, sound, tuning and his... by crustycoder on Tuesday May 10, 2022 @03:17PM (#31331350)
It's usually one miserable git who complains, most people who buy houses next to big sticky up things at the end of religious building are smart enough to figure out what's in them.
Re:The Sound of Bells – The acoustics, sound, tuning and his... by Veen on Tuesday May 10, 2022 @01:31PM (#31329830)
It was hardly a surprise, though. They must have known about the bells before they bought the property.
Re:The Sound of Bells – The acoustics, sound, tuning and his... by clort on Tuesday May 10, 2022 @02:12PM (#31330412)
My sister lives about 100m from such a church tower (which has 5 300yr old bells). Its not really as intrusive as one might imagine..
Re:The Sound of Bells – The acoustics, sound, tuning and his... by ortusdux on Tuesday May 10, 2022 @12:23PM (#31328950)
I found this video by Matthias Wandel about two-toned bells very interesting:

https://www.youtube.com/watch?v=eMgmJEaYs70

Re:The Sound of Bells – The acoustics, sound, tuning and his... by jhallenworld on Tuesday May 10, 2022 @01:15PM (#31329619)
Here is my bell related science-fiction recommendation: Doomsday Book by Connie Willis.

"The drop had been scheduled for noon. If she had come through on time and Probability was right about the slippage, it would be six o'clock in the evening, which was too late for vespers. And if it were vespers, why did the bell go on tolling?

It could be tolling for mass, or for a funeral or a wedding. Bells had rung almost constantly in the Middle Ages—to warn of invasions or fires, to help a lost child find its way back to the village, even to ward off thunderstorms. It could be ringing for any reason at all."

Re:The Sound of Bells – The acoustics, sound, tuning and his... by InitialLastName on Tuesday May 10, 2022 @01:18PM (#31329665)
That book (that section specifically) has one of the best "slow realization that you're in trouble" processes I've read.
Re:The Sound of Bells – The acoustics, sound, tuning and his... by nicwolff on Tuesday May 10, 2022 @12:17PM (#31328889)
That mug-tapping demonstration in the "Doublets or warble in bells" page [0] is neat! I'll be looking for an opportunity to show that to someone, ask why they think it happens, explain pedantically, and yell "Science!"

[0] https://www.hibberts.co.uk/doublets-or-warble-in-bells/

Re:The Sound of Bells – The acoustics, sound, tuning and his... by bsedlm on Tuesday May 10, 2022 @12:44PM (#31329236)
There's a russian artist who's made a couple of albums about "singing bronze". He plays the bronze plates, they sound a lot like bells.

https://www.youtube.com/watch?v=vsZ5RIZrNKw

Re:The Sound of Bells – The acoustics, sound, tuning and his... by WalterBright on Tuesday May 10, 2022 @05:29PM (#31332977)
The sound of European church bells is so lovely and charming. No recording can do it justice.

On the other hand, the American church predilection for electronic bells is an abomination.

My desk telephone has real bells in it for the ringer. It's from the 1950s, naturally.

Re:The Sound of Bells – The acoustics, sound, tuning and his... by rpmisms on Tuesday May 10, 2022 @02:54PM (#31331028)
Grew up in a long tradition of bell-ringing. It's amazing, and even more so in person.

https://www.youtube.com/watch?v=qbn_Fzcxw3o&ab_channel=petya...

Re:The Sound of Bells – The acoustics, sound, tuning and his... by rwmj on Tuesday May 10, 2022 @04:40PM (#31332397)
If you just like the sounds of church bells, the BBC has you covered:

https://www.bbc.co.uk/programmes/b006sgsh

Re:The Sound of Bells – The acoustics, sound, tuning and his... by h2odragon on Tuesday May 10, 2022 @11:28AM (#31328300)
Thanks for sharing your joy in bells. That's an awesome collection of knowledge.
Re:The Sound of Bells – The acoustics, sound, tuning and his... by Cenk on Tuesday May 10, 2022 @01:02PM (#31329483)
Re:The Sound of Bells – The acoustics, sound, tuning and his... by elric on Tuesday May 10, 2022 @01:40PM (#31329939)
Somewhat tangential; there's a company, clock-o-matic, that makes hardware and software to play carillons (or single bells) programatically using MIDI files.
Re:The Sound of Bells – The acoustics, sound, tuning and his... by elijahwright on Tuesday May 10, 2022 @02:57PM (#31331085)
I read a few pages of this and found it most enjoyable. The sheer nerdiness of tuning bells and improving them - it's great!
Re:The Sound of Bells – The acoustics, sound, tuning and his... by jFriedensreich on Tuesday May 10, 2022 @12:54PM (#31329371)
why would he name his software wav”anal” when there even is a concept of “rim partials”. this is hilarious.