News for hackers. Stuff that matters.
Re:How to Make Almost Anything by mitchweaver on Monday November 16, 2026 @01:30AM (#50514681)
(poorly).

People dedicate entire careers to things like CAD — yet they somehow crammed it all into part of one lecture which seems to be little more than an enumeration of 50 different CAD tools.

The use of lowercase throughout doesn't inspire much confidence either.

Re:How to Make Almost Anything by whatever1 on Monday November 16, 2026 @01:32AM (#50514693)
I recently just prompted fable to make me an stl for a hobby of mine. You would be surprised by its success.
Re:How to Make Almost Anything by varjag on Monday November 16, 2026 @01:57AM (#50514819)
I did it with Codex once. The model didn't even bother to chamfer the edges but if you have no experience building physical stuff it still could come as a miracle.
Re:How to Make Almost Anything by JimmyBiscuit on Monday November 16, 2026 @05:08AM (#50515925)
Just tell it to do that then. Im flabbergasted at how great claude is with 3d modelling and cad work now. If you have a proper skill set up its like magic. At least for smaller projects
Re:How to Make Almost Anything by ryandetzel on Monday November 16, 2026 @02:04AM (#50514866)
Check out solidcraft. I spent the weekend with multiple codex sessions watching it build 3d prints for me. What's nice is I can use the tool with it to make my own changes like fusion 360 and so it's like a built in helper. Pretty slick
Re:How to Make Almost Anything by pastel8739 on Monday November 16, 2026 @02:17AM (#50514949)
Making things poorly is a lot more interesting than not making them at all. And then you know who to ask when you need part of it done well.
Re:How to Make Almost Anything by gadsdengrappler on Monday November 16, 2026 @02:19AM (#50514959)
A bit harsh. I don’t think anyone is expecting they can waltz out of this course ready for a career in CAD. It is intended for students coming from a wide range of backgrounds including non-technical, so a whirlwind tour of the fundamentals of many different fab and design tools is perfect. Cross-disciplinary awareness and curiosity is rarely a bad thing.
Re:How to Make Almost Anything by mitchweaver on Monday November 16, 2026 @02:42AM (#50515077)
Harsh? Hardly.

This is like taking a "tour the crayon factory" episode of Mr. Rogers and making a college-level course out of it, but through the eyes of open source evangelist MIT-types.

In fact they would probably learn more from those old PBS shows meant for children, minus some right to repair propaganda thrown in for good measure.

Re:How to Make Almost Anything by elcritch on Monday November 16, 2026 @03:44AM (#50515423)
Except it looks like these students are expected to create at least basic items. There's likely a lab component.
Re:How to Make Almost Anything by thomascountz on Monday November 16, 2026 @05:07AM (#50515915)
We don't have to agree, but I think your comment is quite harsh.

I think it's harsh because you've judged the course's output and impact as "poor" without understanding its purpose and history, or engaging with prior students' final projects and their motivations.[1] Even if you had, you seem to hold some beliefs about the Maker Movement and maker culture[2] (and higher education in general) that are incompatible with the course's aims. That makes your judgment harsh and unqualified.

I may be missing what an alternative would look like. Surely we shouldn't try to make digital manufacturing less accessible. Students pursuing degrees in industrial design, mechanical engineering, media arts, and other fields should get hands-on, cross-disciplinary exposure, shouldn't they? I'm struggling to imagine how we could take a different approach and achieve comparable outcomes.

[1]: Start here: https://pub.cba.mit.edu/863.26/site/file/prior.html

[2]: See: https://en.wikipedia.org/wiki/Maker_culture

Re:How to Make Almost Anything by cedijec334 on Monday November 16, 2026 @05:59AM (#50516228)
Accurate if Mr Rogers had been friends with the most notorious pedophile in history. https://epsteintransparencyact.com/people/neil-gershenfeld/
Re:How to Make Almost Anything by thomascountz on Monday November 16, 2026 @02:19AM (#50514963)
You have to begin somewhere.

Going breadth-first instead of depth-first is a pedagogical choice and a good motivator which was less possible 20 year ago. Now, more than ever, being a generalist means you can actually make something end-to-end, and making doesn't mean you need a professional machinist, industrial designer, or firmware engineer. Finally, this is a practical, not a lecture-based course. Most of what's learned is in the lab where you're expected to work and problem-solve.

If you look at the student portfolios from over the years, I'd say this course has done a lot of good taking this approach.

Re:How to Make Almost Anything by haunter on Monday November 16, 2026 @04:38AM (#50515745)
> The use of lowercase throughout doesn't inspire much confidence either.

I'm still surprised that people hang up on that in the big old 2026

And it's not a new thing either, like even writers in the typewriter age used it as a deliberate stylistic choice

Re:How to Make Almost Anything by croes on Monday November 16, 2026 @01:32AM (#50514688)
Make a pencil
Re:How to Make Almost Anything by WillAdams on Monday November 16, 2026 @09:35AM (#50518034)
If you are seriously interested in doing so, there is a specialized tool for doing that:

https://bridgecitytools.com/products/pp-1-pencil-precision

Re:How to Make Almost Anything by croes on Monday November 16, 2026 @10:42AM (#50518799)
I guess nobody got the reference

https://www.youtube.com/watch?v=DNp_qGZ7c68

Re:How to Make Almost Anything by Animats on Monday November 16, 2026 @01:41AM (#50514731)
That's just one course, not a full load. The pace of that course is insane. It's not clear how much of what they throw at students is intended to be used. The syllabus is huge but the actual projects aren't that complicated. They make students make their own PC board, but that's not all that hard if you have all the right tools. Which they probably do. It's trying to do it in the kitchen sink that's miserable.

I was around for the glory days of TechShop, took about thirteen of their classes, and they covered most of the techniques listed. But making actual stuff took much longer than the classes on machine operation.

I miss having access to CNC mills, laser cutters, and a water jet cutter. The computer-controlled stuff is easy to learn for a programmer. Welding requires endless practice and most people never get very good at it.

Re:How to Make Almost Anything by fxwin on Monday November 16, 2026 @04:23AM (#50515634)
> This is an 18 credit class, requiring ∼18 hours per week for lecture, design, training, prototyping, and documentation.

It might be "just one course", but that's a lot of work!

Re:How to Make Almost Anything by Darmani on Monday November 16, 2026 @04:50AM (#50515811)
[delayed]
Re:How to Make Almost Anything by WillAdams on Monday November 16, 2026 @08:14AM (#50517282)
In a recent video on Adams Savage's "Tested" Youtube channel, he put forth that in 10 years or so, desktop CNC machines will be pervasive (ob. discl., I work for a company which makes and sells such machines).

The software has certainly gotten much better --- one of my early projects had me drawing up vectors in Macromedia Freehand/MX, exporting them to make a font, and to import into a CAM program (MakerCAM, it was a Flash file, really), and coordinating the output from that with using the font in F-Engrave to V-carve a dial.

File and image at: https://community.carbide3d.com/t/locking-register-calipers-...

These days of course one could directly make it in any number of free or affordable programs.

Re:How to Make Almost Anything by varjag on Monday November 16, 2026 @01:54AM (#50514801)
(with computers)
Re:How to Make Almost Anything by olav on Monday November 16, 2026 @08:18AM (#50517317)
Yeah! Interesting to see how this course presents technical solutions to unnamed (or maybe irrelevant) problems. The question, why would you even need to make these things, is at least hard to find.

Also not included are topics like "How to talk to customers" or "How to get customer feedback". Also not included, for example, "How to write a good story", "How to do crochet"

Re:How to Make Almost Anything by o4c on Monday November 16, 2026 @02:01AM (#50514850)
Offtopic,there is a free course available on YT on precision machine design by Alex Slocum.

Title: 2.75 FUNdaMENTALs of Design

https://www.youtube.com/watch?v=wgMq7yha9wU&list=PLksE8LDXGX...

Re:How to Make Almost Anything by renehsz on Monday November 16, 2026 @02:12AM (#50514910)
[delayed]
Re:How to Make Almost Anything by pmontra on Monday November 16, 2026 @02:37AM (#50515053)
I fully agree and I add that this applies to every kind of job. I recently watched a plumber open and clean some pipes. I understood (at least at a superficial level) what he was doing and I've been able to complete the cleaning myself (he couldn't for a number of reasons that don't matter here.) Of course I've been clumsy and I took N times as long as he did but I finally got water again in my kitchen. Without watching him maybe I wouldn't have trusted myself to open some connections or I would have taken hours or days to reason about what was going on and probably do a lot of useless work.

Going back to CS and IT, I found myself talking many times along the years with good software developers coming from a totally different education path (graphics, philosophy, agricultural science, etc) and they had blind spots in areas that I had been exposed to at least a bit at university. Examples: SQL, one of them knew perfectly well how the ORM of the day worked (some JS one 12+ years ago) but not why; networking, one of them knew only to enter the SSID and password and everything else was magic.

Re:How to Make Almost Anything by xbmcuser on Monday November 16, 2026 @02:42AM (#50515083)
This is the reason I think LLM are not being used to their full potential. A lot of busy office work can be automated if people knew they could get llm to make them scripts to do it. Where as currently a lot of people keep asking the llm to do things instead of asking the llm to build tools to do stuff.
Re:How to Make Almost Anything by sureglymop on Monday November 16, 2026 @02:47AM (#50515105)
I think it's interesting because LLMs (at least if used in the terminal) quickly create their own scripts to do a certain task.

The issue is then, that those scripts are probably discarded after one use by the user, partly because the LLM doesn't make them generalized enough and focuses on solving the one task at that time. Partly because, when the issue next arises, it seems cheap to the user to just have the LLM do it again.

I think these models could be trained/fine tuned in a way to anticipate future issues or create general enough solutions but it would imply lowering their own use... so there might not be an incentive for that.

Re:How to Make Almost Anything by xpct on Monday November 16, 2026 @03:25AM (#50515306)
It's also because the LLM training loop is too short-lived to give them feedback on how well repurposed their code can be. I imagine the labs are working on this to make it better, but it's fundamentally a much more expensive environment than training on few-script rollouts.
Re:How to Make Almost Anything by magicalhippo on Monday November 16, 2026 @03:27AM (#50515315)
> I think it's interesting because LLMs (at least if used in the terminal) quickly create their own scripts to do a certain task.

Let me just write a small Python script to decompile a section of this DLL so I can verify the constants for this function matches what the reference said.

With the images, I'll write a small Python script to compute the motion error using the Lucas-Kanade method[1].

Almost literally what Claude (Opus) casually has written as it chipped away at a couple of my problems.

[1]: https://en.wikipedia.org/wiki/Lucas%E2%80%93Kanade_method

Re:How to Make Almost Anything by WillAdams on Monday November 16, 2026 @08:01AM (#50517157)
Can it though? I automated one aspect of my day job and promptly ran into upload limits.

When I found and configured a local LLM to handle files, it took 6 min. 45 seconds to process two files --- I need to handle almost 5,000 in Q4.

Re:How to Make Almost Anything by wtetzner on Monday November 16, 2026 @09:05AM (#50517724)
I don't get it. Were you uploading files to a server to process them? Couldn't you run a local process to do it (which is, I assume, how the LLM got around the upload issues)?
Re:How to Make Almost Anything by WillAdams on Monday November 16, 2026 @10:41AM (#50518794)
When uploading to a server (Microsoft's via Copilot) I ran into upload limits, ~80--100 files per day last I was able to try.

When running locally, it took the LLM 405 seconds to process two files.

Re:How to Make Almost Anything by kaashif on Monday November 16, 2026 @10:49AM (#50518910)
To answer the question, we need to know something, anything about the tasks you automated.

If the task is filling in tax forms from a spreadsheet then yeah, you can ask an LLM to write a script for that.

If the task is proving thousands of math theorems or the task is translating specs into working software, then yeah, I guess you do need an LLM.

Re:How to Make Almost Anything by IX-103 on Monday November 16, 2026 @12:11PM (#50519974)
[delayed]
Re:How to Make Almost Anything by vjvjvjvjghv on Monday November 16, 2026 @11:35AM (#50519523)
[delayed]
Re:How to Make Almost Anything by LoganDark on Monday November 16, 2026 @02:48AM (#50515110)
I'm struggling to find prose. I just see lists of buzzwords. Am I reading it wrong? I struggle to see how this teaches superficial knowledge.
Re:How to Make Almost Anything by teraflop on Monday November 16, 2026 @03:45AM (#50515427)
This website is a syllabus and summary of a course, not the course itself. The actual course involves hands-on time in a lab, building things.
Re:How to Make Almost Anything by tekacs on Monday November 16, 2026 @02:49AM (#50515119)
A book recommended to us when applying to Trinity College, Cambridge was 'The New Turing Omnibus' by A.K. Dewdney [1].

It's still to this day one of my favorite reads. By the time I read it, I knew about a lot of the possibilities within it already. But it does exactly this: it skims across the top of dozens of topics, and it makes you just aware enough of... all sorts of areas of CS.

If you're curious, you might dig deeper - at worst, you know these all exist.

[1]: https://www.amazon.com/New-Turing-Omnibus-Turning-Excursions...

Re:How to Make Almost Anything by grilledchickenw on Monday November 16, 2026 @04:22AM (#50515630)
181 GBP?! Now that is ridiculous.
Re:How to Make Almost Anything by EagnaIonat on Monday November 16, 2026 @05:24AM (#50516019)
Looks like a typo or money laundering. Here is a cheaper one.

https://www.amazon.com/New-Turing-Omnibus-Sixty-Six-Excursio...

Re:How to Make Almost Anything by philipwhiuk on Monday November 16, 2026 @06:15AM (#50516314)
Naive pricing bots is a more likely reason. See stuff like this https://www.youtube.com/watch?v=sseSi0k3Ecg
Re:How to Make Almost Anything by imeanwhatdoikno on Monday November 16, 2026 @04:31AM (#50515692)
Amazing book! I received it as a gift before going into CompSci in mid-90s and I kept it and referred back to it long after I got rid of all my uni textbooks.

P.S. As sibling noted, the new price in that Amazon link is completely insane. Getting it used for a few $/€/£ is well worth it though

Re:How to Make Almost Anything by bre1010 on Monday November 16, 2026 @07:10AM (#50516723)
I LOVE this book. I worked through it in 2012 the summer before I went to college and learned so much that my intro CS class didn't really introduce any concepts I hadn't seen in one of the chapters.

I remember that the book uses a basic or python-like pseudo code and that their neural network implementation has a couple of very subtle bugs which prevent a direct translation to python. The surrounding explanation was correct, but the code wasn't, and so it (presumably unintentionally) forced me to really understand what was happening in order to get it working. I forget the bug, something like a dropped negative.

The information density of the book is just so incredible. Each chapter is like 6 pages long and somehow that's enough to go from zero to a working single-layer neural network, or boolean logic circuits, or error-correcting codes, or 50 other things. I remember it being almost addicting to work through.

Re:How to Make Almost Anything by Witoso on Monday November 16, 2026 @07:35AM (#50516939)
Anyone have a recommendation like this for electronics? Breadth-first, short chapters, “know these all exist” rather than a deep textbook.
Re:How to Make Almost Anything by mfrw on Monday November 16, 2026 @07:56AM (#50517109)
I have two:

- Practical Electronics for Inventors.

- Electronics All In One For Dummies.

Hope folks would chime in with more, I would love more recommendations here.

Re:How to Make Almost Anything by skydhash on Monday November 16, 2026 @08:06AM (#50517203)
“The secret life of circuits” is neat in that regard

https://nostarch.com/secret-life-of-circuits#content

And there’s “Practical electronics for inventors”

https://www.mheducation.com/highered/mhp/product/practical-e...

But electronics is not that large of a field and understanding the mathematical models is kinda required to design stuff as components can be rather fragile and not have a lot of room to play around.

Re:How to Make Almost Anything by yepyoukno on Monday November 16, 2026 @09:28AM (#50517958)
Check out YouTube, there is a growing culture creating high quality shorts of DIY electronics.

This guy is great because he doesn’t talk, he just makes stuff:

https://youtu.be/_QAEILW-gCY

Re:How to Make Almost Anything by javiramos on Monday November 16, 2026 @09:18AM (#50517843)
A little dated but fantastic book: https://artofelectronics.net/prehistory/
Re:How to Make Almost Anything by sstanie on Monday November 16, 2026 @11:41AM (#50519603)
The youtube series from Practical Electronics https://practicingelectronics.com/practical-electronics-cour... (https://www.youtube.com/watch?v=zDnhcsxwNAo&list=PLNx89373hp...) is maybe the best I've seen online. It assumes you have seen a basic circuits course, but that is much easier to fill in on the fly.

I got through most of Art of Electronics, and then found this, and wished I had just gone through this series the whole time. AoE is much more of a reference than a good learning-from-scratch resource.

Re:How to Make Almost Anything by georgecmu on Monday November 16, 2026 @11:59AM (#50519814)
For those who are curious: you can read it for free (but not download) on archive.org (requires an account):

https://archive.org/details/newturingomnibus0000dewd/page/n2...

Re:How to Make Almost Anything by gavin_gee on Monday November 16, 2026 @12:25PM (#50520153)
brilliant primers for asking good questions to AI
Re:How to Make Almost Anything by lordnacho on Monday November 16, 2026 @02:52AM (#50515135)
Indeed, this is what university actually IS. You won't be an expert in anything much at all when you graduate, but a broad survey will tell you how experts divide up the field, what concepts matter, and you will have a decent BS detector for your area of study.
Re:How to Make Almost Anything by kqr on Monday November 16, 2026 @04:20AM (#50515625)
This is true, but it surprised me, and I think many others don't know it either.

After primary and secondary education – which were very broad – I had expected to learn in depth about something narrow when I went to university. A few years into a computer science programme, I was at first a little disappointed when I realised I had still only taken what could reasonably be called introductory courses in various sub-studies of computer science.

But as I got out into the workforce, I've noticed it's been useful to have tried a bit of everything and to have the vocabulary to talk about the basics in each of the sub-studies.

Re:How to Make Almost Anything by maccard on Monday November 16, 2026 @07:07AM (#50516694)
I did competitive programming, and was terrible at it. (I liked it though). A few years after I graduated I noticed that I had a “tendency” to map problems that we had down to known algorithms that are just not intuitive. Prefix sum comes up all the time, like probably once a week in my work, and the code is quicker and just as easy to write as the naive version.
Re:How to Make Almost Anything by ivanjermakov on Monday November 16, 2026 @09:22AM (#50517884)
Not just university, all education is balance between "broad and shallow" and "narrow and deep". Learning is a funnel for becoming the only person in the world knowing something while having all foundational knowledge underneath.
Re:How to Make Almost Anything by CobrastanJorji on Monday November 16, 2026 @03:54AM (#50515484)
This is why "T-shaped" knowledge is so valuable. You need depth in a given area. You should absolutely be an expert at the thing that you're most immediately doing most of the time. But you should also have a great breadth of knowledge, especially within your field, and the reason is so that you recognize situations where a particular solution to a problem you encounter may be relevant. That gives you the opportunity to learn more about that solution.
Re:How to Make Almost Anything by dofm on Monday November 16, 2026 @04:19AM (#50515614)
Indeed, this is the kind of course that would be useful on any CS degree, because it places the specialism in a wider context.
Re:How to Make Almost Anything by Darmani on Monday November 16, 2026 @04:53AM (#50515830)
[delayed]
Re:How to Make Almost Anything by rq1 on Monday November 16, 2026 @05:45AM (#50516143)
Yes. An index is always useful.
Re:How to Make Almost Anything by qalmakka on Monday November 16, 2026 @06:11AM (#50516284)
A gut feeling I've been having since the start of the LLM era is that horizontal knowledge (aka, knowing that stuff exists, can be done in certain way, being able to understand the details without knowing them intimately and being able to do it with a wide array of things) will start getting more and more important the further we go in, because if you know that stuff exist you can point an LLM at it or get it to go in a specific way that it wouldn't take otherwise. LLM have a very strong tendency to just go from point A to point B, and they're often limited to what you can prompt.

This is basically the opposite of the last 50+ years where vertical knowledge (being a savant in a certain very specific field) was seen as the most important thing to have in a super specialised world.

This of course is just my perception, which needless to say, may be wildly off

Re:How to Make Almost Anything by kapep on Monday November 16, 2026 @06:17AM (#50516321)
I'm so sure about that. LLMs seem to have that tendency when people ask them to solve a certain issue, but they are just as good for providing an overview of a topic - or even better, because details don't matter as much.
Re:How to Make Almost Anything by alex_smart on Monday November 16, 2026 @06:24AM (#50516366)
Isn’t the LLM already better at broadly knowing everything that exists than any human could ever hope to be?
Re:How to Make Almost Anything by qalmakka on Monday November 16, 2026 @06:28AM (#50516384)
yep, but it's not better at picking strong, long term decisions in my experience. The LLM most of the time is like a very knowledgeable employee that just does what it's told, and if the boss doesn't understand that you can do something, will often not ask for it to begin with.

for instance, if you use a shitty library X in a project, and you ask your frontier model "please change A -> B" the model will just do that, it will not tell you "well maybe you could also swap the whole thing with Y" because that's not its job - it's job it to change A to B.

Re:How to Make Almost Anything by skeptic_ai on Monday November 16, 2026 @06:49AM (#50516550)
That’s why you just ask: do you think this is a good idea? Correct me if I’m wrong
Re:How to Make Almost Anything by wolttam on Monday November 16, 2026 @06:51AM (#50516573)
So all it takes is asking broad “hey LLM, is there any obviously better approach to what we’re doing?” Questions once in a while.

(I agree, they may not be good at making strong long-term decision still, but that may also be an issue of inadequate context a lot of the time)

Re:How to Make Almost Anything by roveo on Monday November 16, 2026 @06:40AM (#50516481)
LLMs currently are a great demonstration of the wide difference between knowing things and applying them in practice. Knowledge contained in LLMs is vast, but latent.

Humans have a practically infinite "context window" (active memory), we make associations and vaguely remember that thing we heard about that might be useful here, let's explore this thread ("you're absolutely right!"). Agents, being powerful as they are, don't do that, they pattern-match on the task and use the obvious solution, but don't activate their latent knowledge until you point them in the right direction.

The obvious solution might be the best one in 80% of cases or if you don't really care to get the best results (and it's absolutely fine!), but if you do care in your particular case, you have to babysit your agents and really understand if they're doing what you had in mind.

Re:How to Make Almost Anything by PaulRobinson on Monday November 16, 2026 @07:21AM (#50516829)
I’d say a SOTA LLM today has median depth of expertise over many, many disciplines, and slightly better than median expertise in a few key areas. “Jack of all trades, master of none”, springs to mind, but I’d say in the last 6 months it’s got above the median in some key areas.

The sweet spot is a true expert in a domain driving the LLM and keeping it honest, whether that be via agents/skills or reviewing work. In software dev, there’s huge tranches of work at junior/mid level where LLMs can just go, and anything where there is a clearly testable goal it can iterate on faster than a human expert, for example recent progresses in maths proofs.

But, I don’t think there’s an LLM out there that is an expert at everything. At least, not yet.

Re:How to Make Almost Anything by epiccoleman on Monday November 16, 2026 @11:53AM (#50519737)
It's funny because - yes, it does seem like it should be that way. But I feel like a huge amount of the value I've gotten from LLMs has been specifically because I'm a generalist type and I can sort of quickly cut through the space of possibilities.

Just knowing what's possible, having been exposed to a bunch of ideas, libraries, tools, and, yes, reading too much Hacker News - seems like it's allowed me to ask good questions, propose interesting experiments, and drive my own knowledge forward faster with LLMs.

I don't know that it's a particularly unique skill, but from personal experience there seems to be a spectrum of ... creativity? Freedom of thought / expression? And people who are kinda stuck in their ways seem to get less out of LLMs than people who have some idea of what they want and even some direction in mind, but just need the details made frictionless.

I think I'm not doing the best job expressing what I'm on about, so here's an example - I have a little livecoding app[0], which I developed (vibe-coded) for a conference talk I gave in October[1]. It's been a lot of fun to play with and has formed a good surface for lots of different experiments that never made it into the codebase - just throwaway ideas, etc.

So when all the hype about Jev was going a month or two ago, my experiment was "can Jev sit in on the jam?" And what I did was hook it up to the app - not to the "musical context" information that other agents (agents in the Elixir sense, not really the 'llm agent' sense) in that app receive, but rather to the raw signal info that was coming out of the master audio node. And then Jev made a prediction about what note to play, and then that note was sent through WebMIDI to a VST on my machine so that Jev was almost like an outside "guy" soloing over the app's music.

(Jev was a pretty boring soloist, because playing the "most likely" note every time is not especially exciting, but that's beside the point here).

Maybe Claude / Codex could have come up with that idea without me - surely the models know about all of those different tools / options already. But I'd bet that if I hadn't known what to ask for, I'd have gotten something less fun.

So, idk. Does that mark me out as some kind of special generalist who will forever be ahead of the permanent underclass because he reads too much HN? Probably not. But it's at least a useful disposition in the LLM era.

[0]: https://github.com/epiccoleman/tripulator/ (AGPL, go nuts!)

[1]: https://epiccoleman.com/tripulator

Re:How to Make Almost Anything by poopingatwork on Monday November 16, 2026 @09:17AM (#50517836)
It's all about how much crap you can fit in your head without going crazy.

Either you fill it with vertical knowledge (which sucks because now AI wipes out a lot of specialists), or you fill it with horizontal knowledge.

Vertical knowledge is the deep silo of learning that comes from doing more advanced techniques to deal with increasingly difficult problems.

Horizontal knowledge is knowledge about process and workflow: where does the thing created by vertical knowledge fit on the bigger picture? What systems are integrated from left to right to keep you successful?

It may be that a successful developer is now a specialist in general technology.

Silos between specialists were always talked about being broken down but the truth is breaking down a silo means asking your specialists to do more work. You don't get to be a developer anymore, you must also take on operations for successful devops.

It may be that AI finally allows broken silos to be successful because AI removes a lot of friction that occurs when context switching between silos of specialists.

Then the question becomes: who is still creating quality with all these new tools?

Because at the end of the day, everyone wants maximum quality for the cheapest cost.

Re:How to Make Almost Anything by erwincoumans on Monday November 16, 2026 @09:43AM (#50518116)
You may want T knowledge: deep vertical in one area and shallow horizontal in broad fields.
Re:How to Make Almost Anything by oscillonoscope on Monday November 16, 2026 @10:06AM (#50518374)
T knowledge has been valuable for a while but I think it's moving more generalized than that. Something like triangle or sawtooth knowledge. In my career, it's been rare to see deep specialists adequately utilized when hired. Almost every time I see them in a company, they're assuaging the company's neuroses about direction more than needing to synthesize new knowledge.
Re:How to Make Almost Anything by gavin_gee on Monday November 16, 2026 @12:26PM (#50520168)
yeah I think T knowledge is dead. its all horizontal now
Re:How to Make Almost Anything by mihaaly on Monday November 16, 2026 @06:30AM (#50516396)
Even in the ancient ages of no AI long long time ago, the benefit of university education was not in learning specific methods and approaches for specific use but in learning to learn specific methods and approaches for a specific use, including learning what the specific use entails.
Re:How to Make Almost Anything by baxtr on Monday November 16, 2026 @06:51AM (#50516572)
In my experience people are disappointed when their expectations are not met.

Maybe the course promises more than it delivers. It can still be very valuable.

Re:How to Make Almost Anything by teiferer on Monday November 16, 2026 @07:31AM (#50516912)
> But those subject matter experts typically gain their expertise on the job,

For some things, mainly practical applied skills, that is the case, but for a whole class of others it is definitely not. Theoretical foundations are one such area. Whatever you do not learn in college you will never pick up in the job. I have may colleagues who were weak on complexity theory or database theory or things like security fundamentals or number theory or even probability theory and they have never managed to bridge that knowledge gap compared to their colleagues who were strong in those things right out of the gate. Make sure to deep dive at uni, that is likely the only chance you get. (No, watching a bunch of youtube clips does not cut it.)

Re:How to Make Almost Anything by santoshalper on Monday November 16, 2026 @08:08AM (#50517227)
I don't know if people still use the term, but long ago, this was referred to as a "survey course".
Re:How to Make Almost Anything by laidoffamazon on Monday November 16, 2026 @12:38PM (#50520318)
The reason why it’s superficial is most of the students are already experts at at least one of these topics by the time they take the class, usually even before they attend undergrad at all.
Re:How to Make Almost Anything by probably_wrong on Monday November 16, 2026 @02:20AM (#50514964)
Here's the link to the comments from when this was posted last year:

https://news.ycombinator.com/item?id=44775830

Re:How to Make Almost Anything by dr_dshiv on Monday November 16, 2026 @02:29AM (#50515008)
Just back from Shenzhen. Realizing there is a big gap in higher education for how to understand at-scale industrial processes. From prototype to product, there is a lot of know-how. Anyone familiar with instructions along these lines?
Re:How to Make Almost Anything by sampullman on Monday November 16, 2026 @02:54AM (#50515144)
It's pretty hard to generalize the necessary knowledge in a way that's useful and actually teachable. You pretty much have to go through the process yourself a few times, and even then, different factories have different capabilities and procedures, so unless you're making the exact same thing you made before, there's always a lot to learn when bringing up a production line.

In my experience the hardest parts are mechanical DFM and automating verification/QA. Choosing the right factory helps with that, and pretty much everything else

Re:How to Make Almost Anything by peteforde on Monday November 16, 2026 @03:11AM (#50515238)
Re:How to Make Almost Anything by schoen on Monday November 16, 2026 @03:16AM (#50515261)
That's funny, I was going to suggest Bunnie's book, but this is the new edition of that book (updated by Naomi Wu). Thanks for the link!
Re:How to Make Almost Anything by rjsw on Monday November 16, 2026 @09:06AM (#50517727)
Good to read some news about Naomi.
Re:How to Make Almost Anything by WillAdams on Monday November 16, 2026 @09:33AM (#50518008)
Agreed.

I went ahead and placed an order, since it seemed the least I could do.

Re:How to Make Almost Anything by dingdongditchme on Monday November 16, 2026 @04:43AM (#50515771)
In my university we had a major manufacturing engineering. Even that would probably not cover all, and my exposure to it is a decade old, but it is still highly relevant to my career and would be a great extension to TFA.
Re:How to Make Almost Anything by ivanjermakov on Monday November 16, 2026 @09:28AM (#50517955)
Semi related, I'm enjoying Tomaž Zaman journey on making a 10GB router: https://www.youtube.com/@tomazzaman
Re:How to Make Almost Anything by zkmon on Monday November 16, 2026 @02:30AM (#50515014)
To be fair - they seem to focus on setting goals for learning, so that the student would have to learn it all on their own. It's like vibe coding. Teachers give prompts to students and students deliver on the learning work.
Re:How to Make Almost Anything by mrnonchalant on Monday November 16, 2026 @02:33AM (#50515036)
How does one best navigate this? Work their way through the recitations as a start?
Re:How to Make Almost Anything by epsteingpt on Monday November 16, 2026 @02:49AM (#50515118)
This is, hands down, one of the best classes in the already exceptional MIT Media Lab.

Gershenfeld is a low key genius, and this curriculum has been taught every year well before AI.

haters gonna hate.

Re:How to Make Almost Anything by cedijec334 on Monday November 16, 2026 @05:54AM (#50516203)
Hahaha yeah people gonna hate friends of Epstein… (just noticed the username)

https://thetech.com/2026/02/02/epstein-mit-2026-documents

Re:How to Make Almost Anything by dartharva on Monday November 16, 2026 @02:52AM (#50515132)
Re:How to Make Almost Anything by peteforde on Monday November 16, 2026 @03:10AM (#50515227)
The instructor is Neil Gershenfeld. He is a brilliant dude. https://ng.cba.mit.edu/

I'd love to be able to audit at least parts of this.

Re:How to Make Almost Anything by cedijec334 on Monday November 16, 2026 @05:51AM (#50516181)
Another trait he shares with Epstein https://epsteinexposed.com/persons/neil-gershenfeld
Re:How to Make Almost Anything by Scharkenberg on Monday November 16, 2026 @11:56AM (#50519781)
So he met with Epstein... and?

The mass hysteria around the "Epstein files" is largely justified given how widespread abuse was, but many people are really trying to invoke guilt by association / guilt by proxy even when there is nothing particularly revolting about specific individuals mentioned in those files.

I would have thought HN would be more sensible in this discussion. Alas, newly-created throwaway accounts are already here trying to derail the discussion.

Re:How to Make Almost Anything by mlmonkey on Monday November 16, 2026 @12:18PM (#50520044)
People who just have a superficial knowledge of what Epstein did are the quickest to jump on guilt by association.

You have to remember: Epstein was always looking to expand his network and reaching out to any person of interest he could find. The fact that someone replied to his overture in and of iteself doesn't mean anything. He was like a fisherman, always casting lines into the water to see what bites. Once he got to know you better, he'd judge your value to him and your propensity to do illegal/immoral stuff and then blackmail you if you went along.

Re:How to Make Almost Anything by zakqwy on Monday November 16, 2026 @03:37AM (#50515387)
I took and later TA'd this course. The weekly pages that guide lectures are only part of the story; the best way to see what is actually taught is to peruse the sites students make to document their projects. Past experience varies, but in most cases folks come in with minimal knowledge of e.g. electronics, CAD, machining, programming, etc., or are perhaps specialists in just one of the disciplines. HTM(A)A is about the delta between the start and end of the semester for each individual, and is both a life-changing course and a massive time commitment for all involved.
Re:How to Make Almost Anything by fxwin on Monday November 16, 2026 @04:25AM (#50515651)
> the best way to see what is actually taught is to peruse the sites students make to document their projects

are those linked/listed somewhere?

Re:How to Make Almost Anything by Galorious on Monday November 16, 2026 @04:45AM (#50515781)
On the site itself; people > students
Re:How to Make Almost Anything by fxwin on Monday November 16, 2026 @05:32AM (#50516080)
Thanks! I had only checked project presentation + prior years and assumed people -> teaching personnel
Re:How to Make Almost Anything by vladoski on Monday November 16, 2026 @10:37AM (#50518728)
do you think that it would be possible to share the lectures and recitation videos for this year's course when it will finish? I'll be glad to watch them :)
Re:How to Make Almost Anything by bzvox on Monday November 16, 2026 @03:47AM (#50515442)
Drive real results with exclusive inbound call leads. Buy pay-per-call traffic in the USA and boost your conversion rates instantly.
Re:How to Make Almost Anything by throwaway019254 on Monday November 16, 2026 @03:54AM (#50515486)
And then you can continue with:

"How to Make Something that Makes (almost) Anything"

https://fab.cba.mit.edu/classes/865.24/index.html

Nice!

Re:How to Make Almost Anything by tunnuz on Monday November 16, 2026 @04:24AM (#50515642)
Is there an open equivalent of this?
Re:How to Make Almost Anything by WillAdams on Monday November 16, 2026 @08:20AM (#50517338)
At one point in time, I used (abused) the Shapeoko project wiki to try to document everything about small-scale CNC machines.

These days there is:

https://shapeokoenthusiasts.gitbook.io/shapeoko-cnc-a-to-z

and for the CAD/CAM side of things I have been working on:

https://willadams.gitbook.io/design-into-3d

Re:How to Make Almost Anything by DonHopkins on Monday November 16, 2026 @05:08AM (#50515927)
[delayed]
Re:How to Make Almost Anything by RugnirViking on Monday November 16, 2026 @07:46AM (#50517041)
That was a great read, I appreciate the author has tried to hide their snark and have an open mind where they can, though it of course leaks through.

It reminds me of the famous one about colors (which is a primer for computer people about the world of lawyers), "What Colour are your bits?":

https://ansuz.sooke.bc.ca/entry/23

I would love to read a more up to date one, this seems to be from ~1993, so 30 years ago. Has the situation changed, and if so in what direction?

Re:How to Make Almost Anything by fooker on Monday November 16, 2026 @05:33AM (#50516082)
Where can I find good video lectures on this topic?
Re:How to Make Almost Anything by cedijec334 on Monday November 16, 2026 @05:49AM (#50516169)
Great guy… Friend of Epstein’s. Even made sure Epstein knew he was bringing his daughter to the island. https://epsteinexposed.com/persons/neil-gershenfeld
Re:How to Make Almost Anything by husseinhb on Monday November 16, 2026 @06:23AM (#50516357)
I think what ever you need to learn you need more then just watching tutorials, you need to practice and practice and practice until it becomes part of your autopilot skills then after that you will be able to become a someone who really knows that, what ever it was and you can work and sell it to people not have time to learn that specific skill.
Re:How to Make Almost Anything by cedijec334 on Monday November 16, 2026 @06:24AM (#50516361)
Re:How to Make Almost Anything by Trlog on Monday November 16, 2026 @08:21AM (#50517346)
Huh, interesting. 2003 and earlier just show the students enrolled in the class.
Re:How to Make Almost Anything by jm_redwood on Monday November 16, 2026 @08:37AM (#50517475)
A year ago I described myself as having a centipede shaped skillet as opposed to a T-shaped one. Extreme breadth with specialization in many verticals, many overlapping "Ts" so to speak. For all their faults, LLMs make it easier to work this way and much more rewarding.
Re:How to Make Almost Anything by esafak on Monday November 16, 2026 @09:10AM (#50517762)
I've never seen a class with a TA for each student: https://pub.cba.mit.edu/863.26/site/people.html
Re:How to Make Almost Anything by laxisOp on Monday November 16, 2026 @11:28AM (#50519442)
I cant recommend any better and engaging electronics book than this .

https://1lib.sk/book/BvkA1X1JZL/the-secret-life-of-circuits-...

after reading this thank to the author in email.

Re:How to Make Almost Anything by j2kun on Monday November 16, 2026 @11:59AM (#50519818)
Is anyone supposed to be able to use this website for anything meaningful? No proper slides, videos, articles, or anything else someone not taking this course could use.