Re:Multistate Disagreement over the Length of the Foot to End
by capableweb on Saturday June 27, 2020 @05:59AM
(#23660731)
Is US's consistent refusal to adopt something more common like the metric system the ultimate display of "Not invented here" syndrome? (I know imperial was invented by the British, but it's largely just the US left using it) Feels like everyone would be better off if the switch just happened already, as it'll happen one day or another. But they keep on fighting it off, for some reason.
Or does the imperial system have some advantage over metric (not including the fact that everything in the US is already using imperial) that makes it infeasible to change?
Re:Multistate Disagreement over the Length of the Foot to End
by jacobolus on Saturday June 27, 2020 @06:10AM
(#23660780)
> In 1793, Thomas Jefferson requested artifacts from France that could be used to adopt the metric system in the United States, and Joseph Dombey was sent from France with a standard kilogram. Before reaching the United States, Dombey's ship was blown off course by a storm and captured by pirates, and he died in captivity on Montserrat.
Re:Multistate Disagreement over the Length of the Foot to End
by capableweb on Saturday June 27, 2020 @06:23AM
(#23660838)
Thanks for that link! Seems to outline that there has been many attempts, some still ongoing, but not making a lot of progress.
Seems weird to fault all of these failed attempts to the Reagan administration, but I guess that's also an American thing to do, attribute issues to one group of people, not the one you're in, but "the other group".
Re:Multistate Disagreement over the Length of the Foot to End
by rovr138 on Saturday June 27, 2020 @07:23AM
(#23661103)
> but not making a lot of progress
That part reminded me of Puerto Rico. Streets are marked with kilometer markers, rural addresses are street and km and hectometers. Also everyone miles for everything else.
Re:Multistate Disagreement over the Length of the Foot to End
by tomjakubowski on Saturday June 27, 2020 @03:40PM
(#23664095)
And two different scales of magnitudes (US-style "short scale", and "long scale" from Spanish colonial days), meaning two different meanings for millions and billions!
Re:Multistate Disagreement over the Length of the Foot to End
by analog31 on Saturday June 27, 2020 @04:15PM
(#23664321)
It has ceased to matter. Most new products sold in the US use metric fasteners. A typical family has little or no use for imperial tools. There are some weird hold-out standards such as spark plug wrenches, but those have only one use anyway.
The imperial units are all defined in terms of metric units. There's no standard inch sitting in a vault somewhere.
Machine tools can switch from one to the other in a jiffy. Most design drawings give both units.
There are some odd things that still come in imperial units such as building materials, but a "2x4" is anything but 2 x 4 inches. Plywood is imperial length, but metric thickness, rounded to the nearest convenient inch fraction.
Food still uses imperial units of measure, most of the time, but people just eyeball the quantities and probably don't even know the actual amount. Most people can't look at a container and tell you if it's a pint or a quart.
I believe what happened is that the metric system was taught as a bunch of math, and people hate math. The big push came while I was in grade school, and I remember being taught: "The metric system is easy, all you have to do is some math." Metric was math and conversion factors. I remember a machinist telling me: "I hate metric because of the math." Yet he could add fractional inches in his head.
Re:Multistate Disagreement over the Length of the Foot to End
by iNerdier on Saturday June 27, 2020 @06:47AM
(#23660962)
It’s even more confusing than that. They use the British system prior to imperial standardisation, so one has both US customary and imperial units of inch etc measurements. Which is why volumes and amount of sub units are different between the two.
Re:Multistate Disagreement over the Length of the Foot to End
by masklinn on Saturday June 27, 2020 @07:26AM
(#23661117)
> They use the British system prior to imperial standardisation, so one has both US customary and imperial units of inch etc measurements.
In modern parlance most of these should be identical under the 1959 international yard and pound whose entire point was to unify measurements which previously diverged slightly (as well as define them in metric/SI terms). US "Survey" units are really the pre-intenational versions.
The units which were not unified are mostly those of volume, so imperial volumes and US customary volumes differ quite a bit (plus the US has "fluid" and "dry" units): imperial units are the largest, then come US dry units (97% of imperial) followed by US fluid units units (83% of imperial).
Re:Multistate Disagreement over the Length of the Foot to End
by masklinn on Saturday June 27, 2020 @08:39AM
(#23661458)
Apparently it's because a fluid ounce of water is about an (avoirdupois) ounce so, you know, super helpful reminder!
Like the pound being a unit of currency, a unit of mass, a unit of force, a unit of energy and a unit of torque (especially the latter two, who doesn't love having foot-pound and foot-pound being completely different things?)
Re:Multistate Disagreement over the Length of the Foot to End
by ghaff on Saturday June 27, 2020 @12:28PM
(#23662761)
If you're in an engineering discipline that does calculations involving mass and force, it's probably a good idea to work in metric even if you need to convert the final answer back. At least in my experience, it's way too easy to mess up when using pound force, pound mass, and slugs.
Re:Multistate Disagreement over the Length of the Foot to End
by fanf2 on Saturday June 27, 2020 @09:12AM
(#23661651)
An imperial fluid ounce was defined (metric style) to be exactly the volume of an ounce of water. The reason for the change in number of fl.oz. in a pint was to make a gallon weigh 10 lb.
Re:Multistate Disagreement over the Length of the Foot to End
by iNerdier on Saturday June 27, 2020 @02:36PM
(#23663682)
At least the pound referred to a specific thing in its currency form (i.e. a pound of sterling silver) and technically it’s foot-pound and pound-foot for energy and torque, simple!
Re:Multistate Disagreement over the Length of the Foot to End
by noneeeed on Saturday June 27, 2020 @07:00AM
(#23661015)
It gets particularly confusing when people start comparing mpg for US and British cars, as the two gallons are not the same, I've seen so many arguments online where people are flat out comparing differenteasures and assuming they were the same.
Re:Multistate Disagreement over the Length of the Foot to End
by masklinn on Saturday June 27, 2020 @07:32AM
(#23661135)
> It gets particularly confusing when people start comparing mpg for US and British cars, as the two gallons are not the same
TBF mpg is a terrible unit to compare car efficiency regardless of which gallon you use. It's only more convenient to evaluate the range you have on a tank.
Re:Multistate Disagreement over the Length of the Foot to End
by noneeeed on Saturday June 27, 2020 @09:36AM
(#23661778)
I'm obviously missing something. Why would distance travelled on a unit of fuel be a bad way to measure the efficiency of a car?
I know that such measures are always imprecise due to different driving styles/conditions etc. So what is a better way to measure the efficiency of a car?
Re:Multistate Disagreement over the Length of the Foot to End
by masklinn on Saturday June 27, 2020 @11:34AM
(#23662459)
> I'm obviously missing something. Why would distance travelled on a unit of fuel be a bad way to measure the efficiency of a car?
Because it has a sublinear relationship to absolute efficiency: an 11mpg car is significantly more efficient than a 10mpg car, while a 41mpg car much less so in relation to a 40mpg car: both provide an extra mile per gallon, which translates into a 10% and 2.5% increase in efficiency respectively.
> So what is a better way to measure the efficiency of a car?
gpm (aka L/100km which is what's used in most metric countries).
It's less convenient when you know how much fuel you have and want to know what distance you can expect, but it's way more convenient to compare efficiencies, as well as to calculate how much fuel you'll need for a given trip: the examples above are 21.4L/100, 23.5L/100, 5.7 L/100km and 5.9 L/100km. From this, it's obvious that the absolute gain in efficiency is much greater going from 10 to 11 (2L/100km economy) than from 40 to 41 (0.2L/100km)
Re:Multistate Disagreement over the Length of the Foot to End
by addicted on Saturday June 27, 2020 @12:22PM
(#23662731)
Well, even if the better unit is liters per 100km, you’d still face the same problems because the UK/US would be talking about gallons per x miles where they would still face the issue the poster described of differing units of gallons.
Re:Multistate Disagreement over the Length of the Foot to End
by masklinn on Saturday June 27, 2020 @01:21PM
(#23663103)
The point I was rather explicitly (if you go read the original comment) making is that mpgs are bad for comparing fuel economies regardless of differences in what is meant by "gallon", because it's intrinsically not a good unit for comparing fuel efficiencies.
Basically, it makes it easier to compare fuel economy differences at different points in the scale because they become subtraction problems instead of division problems. This is because usually the amount you are going to drive is fixed, and MPG puts the miles in the numerator, while "gpm" puts the fixed miles in the denominator, I think.
Re:Multistate Disagreement over the Length of the Foot to End
by masklinn on Saturday June 27, 2020 @01:26PM
(#23663138)
The original comment was about comparing fuel efficiencies.
But to your point: mpg makes it easier to know how far you can travel on a given volume of fuel, L/100 makes it easier to compare fuel efficiencies, and to know how much fuel you would need for a given distance to travel.
To me the latter seems generally much more useful than the former. The former provides an easier answer to "how far can I go burning this tank", which feels like a much rarer use-case than "how often will I need to refuel to my destination" (and "can I reach my destination on a single tank") for the general population.
Re:Multistate Disagreement over the Length of the Foot to End
by vikramkr on Saturday June 27, 2020 @12:55PM
(#23662940)
The best way I've heard it phrased is that europeans 2ant to know much much fuel they need to get to their destination, while americans want to know how far they can go on a tank. Its obviously oversimplified/not relevant/other pedantic nitpicking but it captures the different relationship americans in general have with driving and their cars
Re:Multistate Disagreement over the Length of the Foot to End
by njarboe on Saturday June 27, 2020 @02:55PM
(#23663814)
Maybe this is because most people with cars in America (especially in the 1950's) were not worried much about the price of gas. Europe had much higher gas prices and was much poorer, so how much it would cost (how much gas would be used to get somewhere) was more important for planning than knowing when they would need to fill up again.
Re:Multistate Disagreement over the Length of the Foot to End
by u801e on Saturday June 27, 2020 @05:12PM
(#23664723)
With volume per distance, you just need to divide the fuel tank capacity by the volume and then multiply it by the distance to get that. With distance per volume, you have to multiply the distance by the total volume of the fuel tank. The first calculation isn't that much harder than the second.
Realistically though, once you've driven the vehicle for a while, you pretty much know the total distance it will get in a tank regardless of the way fuel usage is measured.
Re:Multistate Disagreement over the Length of the Foot to End
by FoeNyx on Saturday June 27, 2020 @06:21AM
(#23660828)
> I know imperial was invented by the British, but it's largely just the US left using it
According to wikipedia, the US do not use the "Imperial System" but the "United States customary units" and they are not exactly equivalent, although they both derive from the "English units ".¹
Also, from the article: "The international foot is exactly 0.3048 of a meter". And it seems the international yard and pound are defined using the SI units as the reference.² (Edit: So by transitivity they also are defined using caesium-133 atom's radiation, light speed in vacuum and Planck constant.)
Re:Multistate Disagreement over the Length of the Foot to End
by masklinn on Saturday June 27, 2020 @08:27AM
(#23661397)
Basically, US Customary is english units pre Imperial standardisation.
Then in 1959 the major non-metric countries (I want to say US, UK, SA, AU and NZ?) unified their units under the "International Yards and Pounds". This metrified the definitions of various non-metric units.
So for all the units with an "international" version, "US customary" and "imperial" are now the same thing (though the pre-international versions might still be used in some contexts e.g. US surveyor units are, in fact, pre-international US customary units), and there are units which were not unified, most notably units of volume which remain different in the US and in imperial dominions.
Re:Multistate Disagreement over the Length of the Foot to End
by vikramkr on Saturday June 27, 2020 @12:52PM
(#23662925)
Everything is already made to imperial, people are already comfortable using imperial. And the US is in an international position of strength in that we arent manufacturing amd selling things to other countries, we are buying goods made elsewhere, so we're the ones generating the demand. We dont need to standardize with the rest of the world in the same way, and so we dont bother with the effort. In the areas where standardization is required, such as research and development, you'll see that scientists already use metric.
The US actually originally planned to use metric, but if I recall correctly, the guy thomas Jefferson had invited to bring metric standards to the US ended up getting captured by pirates, so we never had the standards needed to switch and just didnt bother. But he time metrification was sweeping the globe, we'd already industrialized.
And one advantage that imperial has over metric - there are more multiples of 12. 12 is more divisible. A third of a foot is 4 inches, while a third of a meter is 33.333333333333333 etc centimeters
Re:Multistate Disagreement over the Length of the Foot to End
by kergonath on Saturday June 27, 2020 @02:22PM
(#23663577)
I never get this point. Why does it matter that 100 is not divisible by 3? What makes a third of a metre so special compared to 3 tenths? Most things do not want to fit neatly on integers on one scale, you need decimal points anyway.
In general contexts, either 30, 33, or 35 cm are perfectly acceptable. When accuracy is required, we use millimetres anyway (or micrometres, or nanometres, or angstroms...).
I really don’t see how more integers factors is an advantage that outweighs the clusterfuck that are conversion factors between points, inches, feet, miles, and the other stupid units, or the fact that a nautical mile is not a mile.
Besides, there’s absolutely nothing stopping anyone from using “a third of a metre” as a unit. For example, it’s common to have a line for 1/3 l in measuring cups.
Re:Multistate Disagreement over the Length of the Foot to End
by dredmorbius on Saturday June 27, 2020 @04:09PM
(#23664282)
Divisibility.
Using base-ten units, you can divide precisely by only 2 and 5. Not only are 1/3 and 2/3 not integer subdivisions of ten, they're not even precise decimals, but asre repeating.
Under base 12, there are precise subdivisions of 2, 3, 4, and 6 units. Under base 30 you can evenly divide by these as well as 10 and 15.
Under base 60 (a commonly used measurement base, a usage example will come to you in time), subdivisions are the above, plus 12, 20, and 30.
For practical use and arrangement, these can be highly useful capabilities.
In angular measure (base 360, 60*4), there are divisions which relate to trigonometric functions but not decimal scales. And to truly transcent the rational there are radian measures based on pi.
Under metric, you can still come up with precise divisibility, but only by disposing of the base-ten rationality. E.g., using 60cm or 60kg as a division basis.
Ultimately, base ten is an arbitrary anatomical accident.
Re:Multistate Disagreement over the Length of the Foot to End
by kergonath on Saturday June 27, 2020 @07:20PM
(#23665501)
Yeah, I know. That's hat I see in any discussion about SI with Americans, along with "a table spoon makes more sense as a unit because I've got one in my kitchen drawer".
But why does it matter? Why do you need 1/3 of a metre, and in which context would the 0.333...cm difference with 33 cm matter? This is smaller than the measurement error with common instruments we are likely to use in our daily lives. And there's nothing special about 1/3 m as a physical length, there's no reason why 1/3 m would be more useful than 0.30 m. I am not trying to be flippant, but I never got an answer to that question.
Also, the conversion factor matters only when you actually convert values, not when you measure them. Again, there is nothing stopping anyone from using 1/3 m, or 1/42 m, or 1/π m as units, or even giving them fancy names. As a matter of fact, this is exactly what you do when you use an inch: by definition 1 in = 127/5 m.
In practice the number of dividers is utterly insignificant, because using all the multiples of a centimetre (and millimetres if you're pushing it) is trivial. So getting a feeling for the difference between 32cm, 33cm and 34cm is very easy, and you end up with much better accuracy than if you limit yourself to eights, sixths and quarters.
It's also the same scale down from sub-atomic scales all the way to the whole planet (I understand the use of AU, light-years and parsecs, as the SI prefixes tend to become ridiculous at these scales).
Re:Multistate Disagreement over the Length of the Foot to End
by kergonath on Sunday June 28, 2020 @04:07PM
(#23671652)
To be sure, counting in base 93326215443944152681699238856266700490715968264381621468592963895217599993229915608941463976156518286253697920827223758251185210916864000000000000000000000000 would be a bit cumbersome.
Re:Multistate Disagreement over the Length of the Foot to End
by klyrs on Sunday June 28, 2020 @06:42PM
(#23672641)
After some reflection, I was actually thinking we should maybe use base 100!π³ just in case people end up working with spherical volumes. Open to suggestions.
Re:Multistate Disagreement over the Length of the Foot to End
by Animats on Saturday June 27, 2020 @03:21PM
(#23663971)
In the US, only building components are still Imperial measurements. US-made cars and aircraft have been hard metric for decades. Everything imported, other than building components, is hard metric.
Outside the US, almost nobody has non-metric tools. So Imperial stuff is unacceptable for export.
Home Depot creates the illusion that the US is mostly Imperial. They don't stock metric fasteners. One day I was in a Home Depot on a Sunday, and a Chinese woman was desperately looking for some screw she needed to repair some crucial appliance in her restaurant. It was metric, of course, and Home Depot didn't have an ordinary metric screw.
Re:Multistate Disagreement over the Length of the Foot to End
by manquer on Saturday June 27, 2020 @02:50PM
(#23663787)
the advantage you sight is exactly problem why the international foot and U.S. survey foot exist and the issue mentioned in article happens.
it may be easy for us to think in fractions with repeating decimals, or irrational numbers ,it is super hard for computers which do Floating Point arithmetic, fractional arithmetic is not common from assembly, higher languages, or libraries we typically use to develop apps.
This is why engineering is always in SI, and errors happen in the interface between people refusing to change,
Given that most computing well happens in computers, It is lot more convenient for us change to a system computers understand, rather than keep a system we understand
Re:Multistate Disagreement over the Length of the Foot to End
by moring on Saturday June 27, 2020 @03:35PM
(#23664053)
Computers can be made to understand base 10 though, if needed. We do so routinely when amounts of money are involved so a cent is a cent, even though 1/100 is nonterminating as a binary fraction.
Re:Multistate Disagreement over the Length of the Foot to End
by a1369209993 on Saturday June 27, 2020 @04:19PM
(#23664354)
By that logic they can be made to understand base twelve (et al) just as well. And 0x64 cents is perfectly reasonable amount of money, but that's because it's a integer, not a fraction.
Re:Multistate Disagreement over the Length of the Foot to End
by Gibbon1 on Saturday June 27, 2020 @05:55PM
(#23664991)
Brings up someone I read from an old crusty programmer, binary floating point is the wrong tool for most things. It's fine for scientific simulation work. But for everything else it causes no end of problems.
Re:Multistate Disagreement over the Length of the Foot to End
by a1369209993 on Sunday June 28, 2020 @07:16PM
(#23672794)
Floating point, binary or otherwise, is the wrong tool for many things. (Although (not-necessarily-scientific) simulation work is a very broad class of things.) If you're doing anything related to accounting, there is no excuse not to be using integers.
Re:Multistate Disagreement over the Length of the Foot to End
by manquer on Saturday June 27, 2020 @08:11PM
(#23665736)
There are problems of fractional arithmetic in any base including binary. binary fractions are not base10 fractions and fraught with rounding errors, one more reason to not to use fractional arithmetic .
The U.S. foot mentioned in the article is defined as 1200/3937 of a meter which is 0.304800609601... depending on the precision you want the number will keep changing.
In Imperial you will find a lot of unit conversions like this which will need fractional arithmetic in base 10 like a foot is 1/3 yard etc. You will not find that in SI units as the base(10) and unit conversions (10) are the same making the definitions precise and avoid fractions between unit conversions
Re:Multistate Disagreement over the Length of the Foot to End
by ghaff on Saturday June 27, 2020 @04:10PM
(#23664287)
From quite a while ago. (The last failure I can think of related to units was over 20 years ago which means the design mistake was probably more like 25 years ago.)
Re:Multistate Disagreement over the Length of the Foot to End
by 0BADAC1D on Saturday June 27, 2020 @07:40AM
(#23661167)
a machinist told me that when he had to start doing metric stuff it was all the same dimensions, but converted to metric. so instead of 1/64" he had to mill 0.396875mm. even if everything new designed was in metric with fairly round numbers, you still have a ton of existing stuff designed with imperial units that needs to be taken into account and designed around. the result in some cases is that you get none of the benefits from metric or imperial. and your machinist needs to buy new equipment.
the main thing metric has going for it is that it's the same radix as our counting system and is consistant (as opposed to base12 and then base5280).
Re:Multistate Disagreement over the Length of the Foot to End
by corty on Saturday June 27, 2020 @07:51AM
(#23661210)
There are a few more advantages, especially when machining. There is a large system of standardized metric parts, e.g. washers, screws, etc. available on the cheap because they are needed everywhere. Whereas the US mess of screw sizes, denominations and threads produces a nonending headache of unavailability, high price and non-fitting but similar-looking parts.
Yes, the changeover will be ugly and involve redoing all your plans at some point. But after that you will see how much you are missing out...
Re:Multistate Disagreement over the Length of the Foot to End
by 0BADAC1D on Saturday June 27, 2020 @08:07AM
(#23661284)
there's a bicycle suspension company that's all-metric except for a single screw to adjust tension. apparently the metric screws had too steep of threads and didnt allow for the level of fine adjustment they wanted.
clearly we should create another standard to encompass all these cases and alleviate confusion.
Re:Multistate Disagreement over the Length of the Foot to End
by alkonaut on Saturday June 27, 2020 @03:42PM
(#23664107)
> the main thing metric has going for it is that it's the same radix
I think this is the thing that is usually lost. Metric isn't about the units. No one cares whether the length unit is the size of a finger or a foot.
What's important is the radix, ease of conversion conversion and relation between the units of different dimension. A swimming pool can be 10m long and 5m and 2m deep. That means its volume is 100m^3 or 100 thousand liters and the mass of the water is a hundred tons. There are 3 coke cans in a liter (or kilo) so the pool could room 300k coke cans. Quick in-your-head conversions like that are so difficult in some cases with pounds, gallons, fl.ounces etc.
Re:Multistate Disagreement over the Length of the Foot to End
by Theodores on Saturday June 27, 2020 @06:30AM
(#23660877)
Customary Units and Imperial measurements are bad, we all know that. However, play Devils Advocate for a moment to see the benefits of these allegedly backwards measurements. Take the foot. This is twelve inches. You can divide a foot into thirds or sixths without any recurring numbers. This is of practical application.
If you are working with some DIY task and everything is in Imperial measurements then it all works out as easy as Lego pieces.
Re:Multistate Disagreement over the Length of the Foot to End
by capableweb on Saturday June 27, 2020 @06:46AM
(#23660958)
Thanks, this was what I was looking for. I can totally understand it's easier to cut up a plank if it's twelve inches, in thirds, using customary/imperial, as you get even numbers, compared to with metric, where you'd end up with 0.33... meters for a one meter plan. However, for a 1.2 meter plank, you'd end up with 0.4 pieces. So while I understand how it's beneficial, I don't quite understand how it's beneficial.
Re:Multistate Disagreement over the Length of the Foot to End
by bregma on Saturday June 27, 2020 @07:37AM
(#23661155)
It's beneficial in that it lets you score points in theoretical arguments on the internet.
In practice it doesn't matter. For example, the floor of my bathroom is ten feet wide. I recently had to replace it, which in practice meant I had to cut a plank 9 feet 11.5 inches on one side and 10 feet 0.25 inches on the other side. It seems that the original carpenter, when dividing his plank by 3, eyeballed it it more or less so it looked right and just sort of waved their saw in the general direction of correct. It turns out that in reality, the actual arbitrary units are irrelevant.
But you know, bikeshedding on which arbitrary system of units is best is a pretty effective way to procrastinate finishing off that bathroom renovation.
Re:Multistate Disagreement over the Length of the Foot to End
by stephen_g on Saturday June 27, 2020 @07:53AM
(#23661226)
Yeah, this kind of thing annoys me to no end when I scroll through these kind of debates in comment threads. I wonder if people who pose these hypotheticals about dividing lengths down would be surprised that tradesmen and carpenters in the rest of the world get on just fine, and don’t need a maths degree to work this kind of thing out!
A lot of the arguments though (and some of the most impassioned) mostly boil down to “I’m more familiar with this system so I assume it’s better” - for example, any time that people say that customary units are “more human scales” or “fractions are easier to understand than decimals” whatever. It actually makes basically no difference in practice, it’s just that growing up with one system or the other makes you a lot more familiar with it!
Re:Multistate Disagreement over the Length of the Foot to End
by capableweb on Saturday June 27, 2020 @08:15AM
(#23661317)
> makes you a lot more familiar with it
Essentially boiling down to the famous "easy vs simple" where something is "easy" if you're familiar with it and can draw conclusions via leveraging existing experience and "simple" is that it's maybe not familiar, but easier to become familiar with because it's not complex.
Re:Multistate Disagreement over the Length of the Foot to End
by throw0101a on Saturday June 27, 2020 @01:12PM
(#23663040)
> Take the foot. This is twelve inches.
I think the foot is the only unit that is useful, otherwise converting between inches/feet/yards/miles get a bit ridiculous.
Also doing mathematical operations gets weird if you have to add/subtract 4' 3/4" and 2' 1/8".
Surveyors, the subject of this article, actually use decimalized feet on their rods (IIRC) given the errors that inches and such can add. So while inches-feet may be useful in the wood shop, in other places it's a problem.
Re:Multistate Disagreement over the Length of the Foot to End
by saalweachter on Saturday June 27, 2020 @07:35AM
(#23661149)
It's mostly binary -- 16 ounces in a pound, 16 drams in an ounce, 8 pints in a gallon, 8 furlongs in a mile, 4 rods in a chain. Then you've got a few odd ones, like 10 chains in a furlong or 22 yards in a chain or 3 feet in a yard.
In general, the secret to happiness in customary units is to only ever work in a single unit and never convert between them. If you are working in construction, you probably only ever want to deal in inches. Ceilings are 96 or 120 inches tall, doors are 32 or 36 inches wide, etc etc etc. The moment you start using two units at once you are going to have a bad time, so if you pay attention people tend to only use one, even if it confuses people who don't know why doors are 80 inches high instead of 6 feet 8 inches.
Re:Multistate Disagreement over the Length of the Foot to End
by ithkuil on Saturday June 27, 2020 @11:24AM
(#23662399)
I wonder why people feel the need to downvote somebody for not being sure whether this special unit system has some feature or some other feature. I didn't say it's stupid or anything, I wasn't trolling, I just have no idea, I'm not using it. For all I know 12 feet could be some unit I never heard of.
Do people really have to be fully acquainted with the US culture and/or have done full research on Wikipedia before asking a question for them to be taken seriously?
Re:Multistate Disagreement over the Length of the Foot to End
by saalweachter on Saturday June 27, 2020 @08:59AM
(#23661565)
I'm pretty sure that's just a weird coincidence, with 4 feet equalling 1219 mm and rounding, like 1 rod equalling 5 meters, rather than actually aiming for 12 x 100 for divisibility.
Re:Multistate Disagreement over the Length of the Foot to End
by currymj on Saturday June 27, 2020 @12:46PM
(#23662873)
in the US, at this point, advocating for metrification is associated with a sort of odd, fringe type of political figure.
See the recent presidental campaign of Lincoln Chafee. Or the very humorous "Stonecutters' Song" from the Simpsons (https://www.youtube.com/watch?v=QoSLiHKrzRU), in which a parody of the Freemasons confesses to covering up UFOs, sabotaging electric cars, and suppressing the metric system.
Re:Multistate Disagreement over the Length of the Foot to End
by throw0101a on Saturday June 27, 2020 @01:03PM
(#23662999)
> in the US, at this point, advocating for metrification is associated with a sort of odd, fringe type of political figure.
Tucker Carlson of Fox News thinks that metric system is a form of tyranny:
> CARLSON: Almost every nation on Earth has fallen under the yoke of tyranny -- the metric system -- from Beijing to Buenos Aires from Lusaka to London, the people the world have been forced to measure their environment in millimeters and kilograms.
> Dean Krakel thinks metric is more about Marxism than measurement. As director of the National Cowboy Hall of Fame in Oklahoma, Krakel is waging a war against metric on political grounds. In this 1977 clip from As It Happens, he says it reflects "the philosophical way communists want one of everything" - one world, one monetary system, one educational system and, now, one measurement system. "We're Americans, we're different. We're individualistic, we're strong," he says with passion.
Re:Multistate Disagreement over the Length of the Foot to End
by ghaff on Saturday June 27, 2020 @12:55PM
(#23662943)
And whatever some people on forums like this may think about it, there is zero widespread interest in a wholesale switch to metric in the US. Where there's an advantage to using metric like in science and engineering, people use metric (mostly). For day to day life, they mostly use US units and they work fine.
As someone else noted, even if you look at the UK, they use the metric system more than the US does, but they also still use imperial units in a lot of contexts--including some we don't use in the US like stones.
Re:Multistate Disagreement over the Length of the Foot to End
by corty on Saturday June 27, 2020 @08:00AM
(#23661253)
In any larger workshop over here there is one toolchest usually marked in some bright and ugly color, all the tools marked in the same color, containing "Zollwerkzeug". That is, tools in inch sizes. You rarely need them, but on occasion you come across something from the other side of the pond where your 8mm wrench would just damage the head of your bolt. But often you can also get the job done with a monkey wrench.
However, this means that really changing over to metric, meaning also using international standards for tools, screws, bolts, wires, etc., needs buying new tools and material. I'm not sure how many metric tools there are in a typical US workshop, but I can imagine that they are not too common at the moment.
Re:Multistate Disagreement over the Length of the Foot to End
by cpwright on Saturday June 27, 2020 @01:42PM
(#23663229)
The majority of US consumer grade ratchet/wrench sets have both US and metric sizes. There are enough metric nuts and bolts in random things that you really do need both.
Re:Multistate Disagreement over the Length of the Foot to End
by edoceo on Saturday June 27, 2020 @01:57PM
(#23663364)
Need both, in USA - the at home toolbox in SI countries don't have this problem as they rarely bump into the odd-duck US measurements. The US system require to buy more tools - so I can work on most stuff (SI) and the some stuff (USA).
Buying two things to do one job - as is tradition.
Re:Multistate Disagreement over the Length of the Foot to End
by jabl on Saturday June 27, 2020 @07:19AM
(#23661086)
If you start from scratch, sure.
But if you're e.g. repairing existing equipment, then the customary and SI units are incompatible. Say, a 1/4 inch bolt head is too large for a 6 mm wrench, but too small for a 8 mm (which is typically the next step up from 6mm).
For this reason I had to buy some wrenches in customary units to fix a lawnmower engine.
Re:Multistate Disagreement over the Length of the Foot to End
by wolfgke on Saturday June 27, 2020 @07:31AM
(#23661133)
> But if you're e.g. repairing existing equipment, then the customary and SI units are incompatible. Say, a 1/4 inch bolt head is too large for a 6 mm wrench, but too small for a 8 mm (which is typically the next step up from 6mm).
Where is the problem? Buy a 6.35mm wrench for your 6.35mm bolt head.
Re:Multistate Disagreement over the Length of the Foot to End
by s_tec on Saturday June 27, 2020 @06:52AM
(#23660981)
The US uses different bolt threads than the rest of the world. Just today I had to buy an 1/4 inch long 8-32 threaded screw to fix our stroller. The 8 refers to a standard diameter in the US system, and the 32 means "32 threads per inch".
Re:Multistate Disagreement over the Length of the Foot to End
by chrisseaton on Saturday June 27, 2020 @02:10PM
(#23663481)
How does this work now that almost all products are global and most are manufactured outside the US? Does a Ford engine get designed in both customary for in the US and in metric for the rest of the world?
Re:Multistate Disagreement over the Length of the Foot to End
by toast0 on Saturday June 27, 2020 @03:23PM
(#23663980)
At this point, new cars are 100% metric, with the exception of tire sizes, which are still inches (usually integer inches, sometimes half inches too), and have been for a pretty long time (switching seems to have started in the late 80s / early 90s where cars would have both types of fasteners, and by the end of the 90s, it was just metric). This probably has something to do with the increasingly global supply chains, and increasingly global parts suppliers.
Oh, and the speedometer and the odometer. The digital ones are probably counting meters and converting though.
Re:Multistate Disagreement over the Length of the Foot to End
by chrisseaton on Saturday June 27, 2020 @05:50PM
(#23664963)
It’s funny that the super-American icon of the car has switched but that this hasn’t caused everyone else to switch. My image of America is a parent and child working on their car together in their garage. Would have thought that would have gotten everyone into metric over the last few decades.
Re:Multistate Disagreement over the Length of the Foot to End
by toast0 on Saturday June 27, 2020 @09:20PM
(#23666061)
I mean, over the last few decades, working on cars is harder. Maybe in part because the fastener sizes are tricky, but mostly because things are much more complex.
Anyway, the US already has the metric system for things that matter; science and most manufacturing. For things with wide reach, like distance signs, and speed limits, and quantities at the grocery store, those tend to be in customary units, because the switching cost is too high for the benefit.
Re:Multistate Disagreement over the Length of the Foot to End
by ghaff on Saturday June 27, 2020 @06:39PM
(#23665251)
As other comments have said, Why bother? Whether I use miles or km on the road is pretty much irrelevant. Everyone’s kitchens are filled with mostly US measurement stuff. And truth be told if I’m weighing things I switch effortlessly between grams and ounces on my digital scale. Some people may but I’ve no particular ideological position on it.
Re:Multistate Disagreement over the Length of the Foot to End
by Blackthorn on Saturday June 27, 2020 @07:42PM
(#23665613)
Car stuff is usually metric, in my experience.
Plenty of things end up as imperial elsewhere in the world, though. My lathe and milling machine dials are graduated in thous (thousandths of an inch). I've seen those on YouTube channels in other countries.
Re:Multistate Disagreement over the Length of the Foot to End
by SiempreViernes on Saturday June 27, 2020 @06:50AM
(#23660970)
The exact sizes are all arbitrary, in practice the are all in even fractions of some base unit: imperial an metric tools simply fit together poorly because they’ve been made in slightly different sizes
Re:Multistate Disagreement over the Length of the Foot to End
by lisper on Saturday June 27, 2020 @11:35AM
(#23662463)
It's political, just like wearing masks to prevent covid infection has become politicized. Both masks and meters have become associated with left-wing intellectual elites, and so the right reflexively rebels against them.
EDIT: to all the people downvoting this comment without explaining why: you are actually proving my point.
Re:Multistate Disagreement over the Length of the Foot to End
by new2628 on Saturday June 27, 2020 @11:48AM
(#23662545)
You forgot the step where left-wing intellectual elites ridiculed people for wearing masks as it "doesn't protect anyway and creates a false sense of security". If anything, I would imagine masks to be a prepper thing, so I would have thought more popular on the right, but I guess there is no logic anymore.
Re:Multistate Disagreement over the Length of the Foot to End
by lisper on Saturday June 27, 2020 @12:00PM
(#23662600)
Masks don't protect the person who wears them, they protect the people around the people who wear them, so they only work if everyone wears them. In the early days of the pandemic there weren't enough masks for the general public (because the Trump administration had sent a significant portion of the U.S. supply to China [1]) so there was a desire to reserve the limited remaining supply for health care workers.
Comments like yours which obfuscate basic facts like this are a perfect example of the kind of politicization I'm talking about.
Re:Multistate Disagreement over the Length of the Foot to End
by addicted on Saturday June 27, 2020 @12:36PM
(#23662812)
Also we didn’t know that masks protect. At the time the thinking was the virus was spreading through surfaces so the guidance was to wipe down all surfaces, etc.
But since then we’ve discovered that the overwhelming majority of spread has been due to direct transfer of the virus usually through water droplets.
The virus is too small for masks to stop them. But most masks are good enough to stop water droplets.
Re:Multistate Disagreement over the Length of the Foot to End
by lisper on Saturday June 27, 2020 @12:23PM
(#23662734)
Oh, good grief. So I left out the word "mainly". That in no way refutes my point, which is that this entire discussion has been politicized. And the fact that you are picking at such a tiny nit just further proves my point.
Re:Multistate Disagreement over the Length of the Foot to End
by naasking on Saturday June 27, 2020 @01:23PM
(#23663120)
I agree it's been politicized, which is why being precise is important. The fact that medical authorities made claims that blatantly contradict all common sense and basic scientific facts erodes the public confidence. This has happened numerous times since the pandemic began.
I'm Canadian, so I frankly have no direct stake in US politics, but if people on both sides can't agree on basic facts, then there's no hope.
Finally, I don't think the protection afforded is really all that "minimal" for numerous reasons, but the degree of protection wasn't the main thrust point of my post so I didn't (and still don't) want to go into it.
Re:Multistate Disagreement over the Length of the Foot to End
by Mountain_Skies on Saturday June 27, 2020 @05:37PM
(#23664881)
The medical community has war gamed pandemics for years. I wasn't surprised to see the "masks don't help" line because that's been part of the lessons learned from these war games.
They knew there would be panic buying so they had this bit of subterfuge ready to go when a pandemic hit. The problem is that it is a bee-sting solution: one use only. Now that COVID19 has turned out to be far less dire than predicted, that bee-sting solution is gone and wasted. When we get a much more deadly pandemic, and we will, that tool will no longer be available. It's a shame it was used for this situation.
Sure, we could learn from this to always have enough PPE in stock but once this pandemic is over, every year there is going to be pressure on budgets on every level to cut the size (and cost) of PPE storage until it eventually shrinks down to what it was when this pandemic started.
If the medical community wants to regain some of its credibility it needs to stop circling the wagons and pretending this wasn't an intentional but well meaning lie they told the public. The longer it takes them to stop spinning the issue, the longer it is going to take them to regain the trust of the public, which will be detrimental to public health.
Re:Multistate Disagreement over the Length of the Foot to End
by turbonaut on Saturday June 27, 2020 @05:47AM
(#23660673)
Whilst standardisation is obviously important, the article references an anecdote where a building had to lose a storey due to the usage of the ‘wrong type of foot’.
This does not seem overly plausible given the error would be <2mm over the height of the Burj Khalifa.
Re:Multistate Disagreement over the Length of the Foot to End
by chrisseaton on Saturday June 27, 2020 @06:43AM
(#23660940)
Think about the error in the distance of the building to the airport, not the error in the height. You can imagine how that error in the distance could be a few feet, which would take the build height into a category of maximum height that was many feet lower. The error in the height is irrelevant in this case.
Re:Multistate Disagreement over the Length of the Foot to End
by unnouinceput on Saturday June 27, 2020 @06:46AM
(#23660957)
How about the inch. I know when you say your height, in US, you use feet + inches. And inch is defined also in regards to meter (2.54 cm) but also in regards to foot (12 inches == one foot). The what kind of foot is used, and does the inch then varies in length as well?
Re:Multistate Disagreement over the Length of the Foot to End
by masklinn on Saturday June 27, 2020 @07:18AM
(#23661078)
The issue here is the surveyor's foot, which as its name indicates is only used for surveying (and corresponds to the pre-metrication foot).
That's like nautical miles. If you're in a nautical context "mile" can be ambiguous, but if you're not then it's just the mile (well except there's also a survey mile).
Anyway the answer to your question is that in 1959 all non-metric units of length (and weight) were standardised internationally and defined in terms of metric units.
So outside of specific contexts (like surveying), an inch is 2.54cm and a foot is 12 inches of 2.54cm or 30.48cm. The "reference" unit is actually the international yard at 91.44cm, with there being 3ft to a yard, and 12in to an ft.
Re:Multistate Disagreement over the Length of the Foot to End
by vikramkr on Saturday June 27, 2020 @01:01PM
(#23662989)
Lot of "why not metric" comments. Heres what I think is the main reason: it's just not worth the effort. The US isn't missing out on tangible benefits from not standardizing with the rest of the world. Where it matters in science, we already use metric. Day to day, who cares? Why go through all the trouble to switch? You need people to retrain with a new system, retool signs and equiptment, and so on. It's just not worth it to be able to divide units by 10 more easily, especially when the system we already have is full of powers of 2 or 12 which are frankly a bit easier to divide with day to day (1/3 of a foot is 4 inches, while 1/3 of a meter is 33.33333333.... centimeters). It's just not worth the hassle.
Re:Multistate Disagreement over the Length of the Foot to End
by throwaway_pdp09 on Saturday June 27, 2020 @01:26PM
(#23663137)
My physics teacher at school told us many times how lucky we were not to have to work in imperial. I'll take his word over yours.
There's a midpoint between science and day-to-day (engineering). Anyway, if you want the US to continue its decline, such a can't-be-bothered attitude will help.
"However, on September 23, 1999, communication with the spacecraft was lost as the spacecraft went into orbital insertion, due to ground-based computer software which produced output in non-SI units of pound-force seconds (lbf·s) instead of the SI units of newton-seconds (N·s) specified in the contract between NASA and Lockheed."
Re:Multistate Disagreement over the Length of the Foot to End
by vikramkr on Saturday June 27, 2020 @01:36PM
(#23663207)
Who in physics works in imperial? Research is solidly metric in the US.
The mars orbiter loss was due to a failure to perform the necessary checks etc to make sure the mission was on track. Continue reading the section about the failure report. The discrepancy had been noted by humans and had been brought up, but the concerns were ignored because they failed to fill out the correct paperwork, and NASA takes responsibility for the loss, and does not blame lockheed.
Re:Multistate Disagreement over the Length of the Foot to End
by Mountain_Skies on Saturday June 27, 2020 @05:44PM
(#23664922)
I've never had a person from Canada or the UK tell me their height in meters. Never heard anyone from either country give their weight in kg. Both countries are metric but still have lots of imperial in their daily lives. Wouldn't be surprised to find other local measurements around the world sitting next to the international metric standard.
Re:Multistate Disagreement over the Length of the Foot to End
by r_singh on Monday July 06, 2020 @11:53AM
(#23749180)
Check the last paragraph of the link you've submitted. You can see the word feet used there many times, suggesting that "feet" is used to measure a lot of things and is the most commonly used while describing a property from a real estate perspective.
Re:Multistate Disagreement over the Length of the Foot to End
by s_tec on Saturday June 27, 2020 @07:01AM
(#23661020)
The human eye is really good at dividing things in half, so it's easy to make power-of-two divisions without special tools. Just divide whatever it is in half, then divide it in half again, and so forth until you have a sixteenth.
The US system has lots of power-of-two factors in it, which suggests that it was born in the marketplaces and workbenches of people who did most things by hand, rather than our modern world where we design everything on paper first.
Re:Multistate Disagreement over the Length of the Foot to End
by iNerdier on Saturday June 27, 2020 @07:00AM
(#23661014)
It’s just a hassle to switch things when you have a large number of people who have adopted it. Even the UK which is nominally metric hasn’t had the will to switch from miles to kilometres for road speeds and distances. The slow spread of globally used volumes is probably the only way it’s ever going to happen and even there it won’t affect most areas.
There does also seem to be a more extreme reluctance in the US to change to more widely adopted units and conventions (e.g. day/month/year) and if anything being one of the only countries left using non metric units seems to be a point of pride. About the only SI units the us seem to use relate to fields invented after science as a whole adopted it as standard (e.g. electrical units).
In one sense inches have a pleasant form of being subdivided into more easily divisible Power of two units but even that falls apart over small distances where they turn to ‘thousandths of an inch’ rather 1024ths. Useful in a world of pre-computer drawing because you could easily scale up plans but not particularly useful now.
Re:Multistate Disagreement over the Length of the Foot to End
by ghaff on Saturday June 27, 2020 @12:41PM
(#23662839)
There does seem to be a particular reluctance in the US to change things "because everyone else does it this way."
It even goes beyond that though. Although this is on its way to becoming a largely academic point, the US also hasn't changed the bills and coins in common circulation for probably close to 100 years. We still have a penny, the dollar coin didn't take off (which I'm actually fine with as I prefer a bill for a $1-$2ish denomination), and you still can't count of being able to use $100 bill at a random store in the US.
Re:Multistate Disagreement over the Length of the Foot to End
by beeforpork on Saturday June 27, 2020 @07:03AM
(#23661027)
Exactly. Drill sizes and, even worse, screw sizes drive me crazy. It's not even obvious which one is larger without doing math.
This reminds me of the great Mythbusters who, to me, came across a bit stubborn to insist on US units -- it felt unsciency. I do understand that they wanted to use the 'normal' system that 'normal' people use -- I always recalculated all their psi and inches of mercury and fathoms per fortnight to SI.
Re:Multistate Disagreement over the Length of the Foot to End
by unethical_ban on Saturday June 27, 2020 @11:39AM
(#23662488)
I'm a big fan of converting to Celsius. It would probably be the cheapest thing to switch to.
Kilometers? We have more than four million miles of road in the US, and lets rough-guess at the VERY least two speed signs each mile, one each direction. The real number on average is probably double that.
Then there are "mile markers" and every freeway sign that lists distance by miles.
Then there are cars that don't have highly visible kM speedometer markings.
Specific industries may shift to metric, and surely things like surveys probably could. But the total conversion? I would bet on many structural changes in the United States before that ever happens.
Voting reform, Constitutional amendments, DC and PR statehood, banning reality TV, all seem more likely than moving to metric.
Re:Multistate Disagreement over the Length of the Foot to End
by ghaff on Saturday June 27, 2020 @12:15PM
(#23662685)
Honestly, there's probably less justification in switching to Celsius than other units. Pretty much the only place Fahrenheit really falls down is that it's different from the rest of the world--and the vast majority of Americans are not exposed to that difference on a day to day basis.
Yes, you need to remember what the rather arbitrary seeming freezing and boiling temperature of water are, but that's not a big deal. And you actually get a finer grained measurement system without resorting to decimals. And you're less likely to need negative numbers for ordinary temperatures. (And, if you do, you know it's really really cold.)
Finally, while the Celsius degree size is used in a lot of technical calculations, the absolute scale isn't usually. Kelvin is used instead. So if anything were the "right" unit to use it would be Kelvin, but that would be fairly obviously silly for day to day use.
Re:Multistate Disagreement over the Length of the Foot to End
by kergonath on Saturday June 27, 2020 @02:46PM
(#23663764)
In my field of research (condensed matter Physics and Thermodynamics), the split between Kelvin and degrees centigrades is about 50%. Anything that gets in contact with industry tends to use °C for some reason.
Re:Multistate Disagreement over the Length of the Foot to End
by ghaff on Saturday June 27, 2020 @03:12PM
(#23663918)
When I was doing material science (long time ago), as I recall we'd obviously use Kelvin for calculations where you needed to use an absolute temperature scale. But if we were just stating an annealing temperature or something like that, we'd use Celsius.
Re:Multistate Disagreement over the Length of the Foot to End
by Mountain_Skies on Saturday June 27, 2020 @05:49PM
(#23664953)
I'm the opposite. I'm all for switching to most metric units but there's nothing appealing to me about Celsius. I can't think of one instance in my life where knowing that the boiling point of water is a particular temperature was useful. Every time I've boiled water it has been without the assistance of a thermometer. The freezing point has been somewhat more useful since ice can be a safety hazard and is part of typical weather in many parts of the world. Even then, there are many other variables involved that make the exact temperature of 32 or 0 worthless since ice on the sidewalk or pavement isn't going to form at exactly that temperature.
Re:Multistate Disagreement over the Length of the Foot to End
by pkaye on Saturday June 27, 2020 @01:49PM
(#23663294)
In know in engineering and science courses we are taught mostly metric with a bit of imperial. In something like structural engineering you need to be more familiar with imperial because the architects and construction crew would work in imperial. But a chemist would fully work in metric. Day to day life it remains imperial because people are familiar with it and there is no point in switching everything. The fractions are harder for many people but you can use decimal feet or pounds most of the time.
Re:Multistate Disagreement over the Length of the Foot to End
by ghaff on Saturday June 27, 2020 @12:48PM
(#23662892)
The US Metric Board also wasn't really getting anywhere and didn't have a Congressional mandate. [1] I'm not sure you can really blame Reagan for getting rid of an ineffective government organization that was being publicly ridiculed.
Re:Multistate Disagreement over the Length of the Foot to End
by mcv on Saturday June 27, 2020 @08:58AM
(#23661559)
So the US finally standardises on a single international standard for distance, and they standardise on feet?
This while confusion over different types of feet is the entire reason why the metric system caught on like a wildfire. Before the metric system, every city used to have its own foot. Most, not all, were 12 inches, but they also all had their own inch.
Re:Multistate Disagreement over the Length of the Foot to End
by corty on Saturday June 27, 2020 @07:43AM
(#23661182)
Meanwhile the SI refined its definitions further in the last few years, making it transferable to our possible future alien overlords from outer space.
I really cannot fathom how such an inconsistency as the disagreement over a unit that is nonstandard, weird and custom anyways could be allowed. The rest of the world got its act together roughly 200 years ago, admittedly with some leftovers, but those vanished over time...
Re:Multistate Disagreement over the Length of the Foot to End
by citizenpaul on Saturday June 27, 2020 @07:07PM
(#23665425)
Pretty much every house in the US is built on imperial. Unless everyone in the country wants to tear down their house and rebuild for solely the purpose of moving to the metric system then there will Imperial stuff tools manufacturing and such pretty much forever.
Cars and machinery are Imperial as well but they have much lower lifetimes than houses.
I remember reading somewhere that just changing speed limit signs would cost more than 100 Billion to change and that was a modest estimate. I wish I could find where they did the math.
Or does the imperial system have some advantage over metric (not including the fact that everything in the US is already using imperial) that makes it infeasible to change?
More seriously, blame the Reagan administration.
https://en.wikipedia.org/wiki/Metrication_in_the_United_Stat...
Seems weird to fault all of these failed attempts to the Reagan administration, but I guess that's also an American thing to do, attribute issues to one group of people, not the one you're in, but "the other group".
That part reminded me of Puerto Rico. Streets are marked with kilometer markers, rural addresses are street and km and hectometers. Also everyone miles for everything else.
I’m actually not sure which conversion failed.
https://metricpioneer.wordpress.com/2014/01/05/long-scale-an...
The imperial units are all defined in terms of metric units. There's no standard inch sitting in a vault somewhere.
Machine tools can switch from one to the other in a jiffy. Most design drawings give both units.
There are some odd things that still come in imperial units such as building materials, but a "2x4" is anything but 2 x 4 inches. Plywood is imperial length, but metric thickness, rounded to the nearest convenient inch fraction.
Food still uses imperial units of measure, most of the time, but people just eyeball the quantities and probably don't even know the actual amount. Most people can't look at a container and tell you if it's a pint or a quart.
I believe what happened is that the metric system was taught as a bunch of math, and people hate math. The big push came while I was in grade school, and I remember being taught: "The metric system is easy, all you have to do is some math." Metric was math and conversion factors. I remember a machinist telling me: "I hate metric because of the math." Yet he could add fractional inches in his head.
In modern parlance most of these should be identical under the 1959 international yard and pound whose entire point was to unify measurements which previously diverged slightly (as well as define them in metric/SI terms). US "Survey" units are really the pre-intenational versions.
The units which were not unified are mostly those of volume, so imperial volumes and US customary volumes differ quite a bit (plus the US has "fluid" and "dry" units): imperial units are the largest, then come US dry units (97% of imperial) followed by US fluid units units (83% of imperial).
Like the pound being a unit of currency, a unit of mass, a unit of force, a unit of energy and a unit of torque (especially the latter two, who doesn't love having foot-pound and foot-pound being completely different things?)
TBF mpg is a terrible unit to compare car efficiency regardless of which gallon you use. It's only more convenient to evaluate the range you have on a tank.
I know that such measures are always imprecise due to different driving styles/conditions etc. So what is a better way to measure the efficiency of a car?
Because it has a sublinear relationship to absolute efficiency: an 11mpg car is significantly more efficient than a 10mpg car, while a 41mpg car much less so in relation to a 40mpg car: both provide an extra mile per gallon, which translates into a 10% and 2.5% increase in efficiency respectively.
> So what is a better way to measure the efficiency of a car?
gpm (aka L/100km which is what's used in most metric countries).
It's less convenient when you know how much fuel you have and want to know what distance you can expect, but it's way more convenient to compare efficiencies, as well as to calculate how much fuel you'll need for a given trip: the examples above are 21.4L/100, 23.5L/100, 5.7 L/100km and 5.9 L/100km. From this, it's obvious that the absolute gain in efficiency is much greater going from 10 to 11 (2L/100km economy) than from 40 to 41 (0.2L/100km)
Basically, it makes it easier to compare fuel economy differences at different points in the scale because they become subtraction problems instead of division problems. This is because usually the amount you are going to drive is fixed, and MPG puts the miles in the numerator, while "gpm" puts the fixed miles in the denominator, I think.
But to your point: mpg makes it easier to know how far you can travel on a given volume of fuel, L/100 makes it easier to compare fuel efficiencies, and to know how much fuel you would need for a given distance to travel.
To me the latter seems generally much more useful than the former. The former provides an easier answer to "how far can I go burning this tank", which feels like a much rarer use-case than "how often will I need to refuel to my destination" (and "can I reach my destination on a single tank") for the general population.
Realistically though, once you've driven the vehicle for a while, you pretty much know the total distance it will get in a tank regardless of the way fuel usage is measured.
According to wikipedia, the US do not use the "Imperial System" but the "United States customary units" and they are not exactly equivalent, although they both derive from the "English units ".¹
Also, from the article: "The international foot is exactly 0.3048 of a meter". And it seems the international yard and pound are defined using the SI units as the reference.² (Edit: So by transitivity they also are defined using caesium-133 atom's radiation, light speed in vacuum and Planck constant.)
¹ https://en.wikipedia.org/wiki/Comparison_of_the_imperial_and...
² https://en.wikipedia.org/wiki/International_yard_and_pound
Then in 1959 the major non-metric countries (I want to say US, UK, SA, AU and NZ?) unified their units under the "International Yards and Pounds". This metrified the definitions of various non-metric units.
So for all the units with an "international" version, "US customary" and "imperial" are now the same thing (though the pre-international versions might still be used in some contexts e.g. US surveyor units are, in fact, pre-international US customary units), and there are units which were not unified, most notably units of volume which remain different in the US and in imperial dominions.
The US actually originally planned to use metric, but if I recall correctly, the guy thomas Jefferson had invited to bring metric standards to the US ended up getting captured by pirates, so we never had the standards needed to switch and just didnt bother. But he time metrification was sweeping the globe, we'd already industrialized.
And one advantage that imperial has over metric - there are more multiples of 12. 12 is more divisible. A third of a foot is 4 inches, while a third of a meter is 33.333333333333333 etc centimeters
In general contexts, either 30, 33, or 35 cm are perfectly acceptable. When accuracy is required, we use millimetres anyway (or micrometres, or nanometres, or angstroms...).
I really don’t see how more integers factors is an advantage that outweighs the clusterfuck that are conversion factors between points, inches, feet, miles, and the other stupid units, or the fact that a nautical mile is not a mile.
Besides, there’s absolutely nothing stopping anyone from using “a third of a metre” as a unit. For example, it’s common to have a line for 1/3 l in measuring cups.
Using base-ten units, you can divide precisely by only 2 and 5. Not only are 1/3 and 2/3 not integer subdivisions of ten, they're not even precise decimals, but asre repeating.
Under base 12, there are precise subdivisions of 2, 3, 4, and 6 units. Under base 30 you can evenly divide by these as well as 10 and 15.
Under base 60 (a commonly used measurement base, a usage example will come to you in time), subdivisions are the above, plus 12, 20, and 30.
For practical use and arrangement, these can be highly useful capabilities.
In angular measure (base 360, 60*4), there are divisions which relate to trigonometric functions but not decimal scales. And to truly transcent the rational there are radian measures based on pi.
Under metric, you can still come up with precise divisibility, but only by disposing of the base-ten rationality. E.g., using 60cm or 60kg as a division basis.
Ultimately, base ten is an arbitrary anatomical accident.
But why does it matter? Why do you need 1/3 of a metre, and in which context would the 0.333...cm difference with 33 cm matter? This is smaller than the measurement error with common instruments we are likely to use in our daily lives. And there's nothing special about 1/3 m as a physical length, there's no reason why 1/3 m would be more useful than 0.30 m. I am not trying to be flippant, but I never got an answer to that question.
Also, the conversion factor matters only when you actually convert values, not when you measure them. Again, there is nothing stopping anyone from using 1/3 m, or 1/42 m, or 1/π m as units, or even giving them fancy names. As a matter of fact, this is exactly what you do when you use an inch: by definition 1 in = 127/5 m.
In practice the number of dividers is utterly insignificant, because using all the multiples of a centimetre (and millimetres if you're pushing it) is trivial. So getting a feeling for the difference between 32cm, 33cm and 34cm is very easy, and you end up with much better accuracy than if you limit yourself to eights, sixths and quarters.
It's also the same scale down from sub-atomic scales all the way to the whole planet (I understand the use of AU, light-years and parsecs, as the SI prefixes tend to become ridiculous at these scales).
Care to write the proposal?
Outside the US, almost nobody has non-metric tools. So Imperial stuff is unacceptable for export.
Home Depot creates the illusion that the US is mostly Imperial. They don't stock metric fasteners. One day I was in a Home Depot on a Sunday, and a Chinese woman was desperately looking for some screw she needed to repair some crucial appliance in her restaurant. It was metric, of course, and Home Depot didn't have an ordinary metric screw.
How far is one thousand feet?
it may be easy for us to think in fractions with repeating decimals, or irrational numbers ,it is super hard for computers which do Floating Point arithmetic, fractional arithmetic is not common from assembly, higher languages, or libraries we typically use to develop apps.
This is why engineering is always in SI, and errors happen in the interface between people refusing to change,
Given that most computing well happens in computers, It is lot more convenient for us change to a system computers understand, rather than keep a system we understand
Um, what? Computers understand base 2 (or 16 for compactness), not base 10. A centimeter is not 0.00999999977648258209228515625 meters.
The U.S. foot mentioned in the article is defined as 1200/3937 of a meter which is 0.304800609601... depending on the precision you want the number will keep changing.
In Imperial you will find a lot of unit conversions like this which will need fractional arithmetic in base 10 like a foot is 1/3 yard etc. You will not find that in SI units as the base(10) and unit conversions (10) are the same making the definitions precise and avoid fractions between unit conversions
Sadly several significant NASA failures would disagree.
the main thing metric has going for it is that it's the same radix as our counting system and is consistant (as opposed to base12 and then base5280).
Yes, the changeover will be ugly and involve redoing all your plans at some point. But after that you will see how much you are missing out...
clearly we should create another standard to encompass all these cases and alleviate confusion.
I think this is the thing that is usually lost. Metric isn't about the units. No one cares whether the length unit is the size of a finger or a foot.
What's important is the radix, ease of conversion conversion and relation between the units of different dimension. A swimming pool can be 10m long and 5m and 2m deep. That means its volume is 100m^3 or 100 thousand liters and the mass of the water is a hundred tons. There are 3 coke cans in a liter (or kilo) so the pool could room 300k coke cans. Quick in-your-head conversions like that are so difficult in some cases with pounds, gallons, fl.ounces etc.
If you are working with some DIY task and everything is in Imperial measurements then it all works out as easy as Lego pieces.
In practice it doesn't matter. For example, the floor of my bathroom is ten feet wide. I recently had to replace it, which in practice meant I had to cut a plank 9 feet 11.5 inches on one side and 10 feet 0.25 inches on the other side. It seems that the original carpenter, when dividing his plank by 3, eyeballed it it more or less so it looked right and just sort of waved their saw in the general direction of correct. It turns out that in reality, the actual arbitrary units are irrelevant.
But you know, bikeshedding on which arbitrary system of units is best is a pretty effective way to procrastinate finishing off that bathroom renovation.
A lot of the arguments though (and some of the most impassioned) mostly boil down to “I’m more familiar with this system so I assume it’s better” - for example, any time that people say that customary units are “more human scales” or “fractions are easier to understand than decimals” whatever. It actually makes basically no difference in practice, it’s just that growing up with one system or the other makes you a lot more familiar with it!
Essentially boiling down to the famous "easy vs simple" where something is "easy" if you're familiar with it and can draw conclusions via leveraging existing experience and "simple" is that it's maybe not familiar, but easier to become familiar with because it's not complex.
Blatantly stolen from Rich Hickey's "Simple Made Easy" talk: https://www.infoq.com/presentations/Simple-Made-Easy/
I think the foot is the only unit that is useful, otherwise converting between inches/feet/yards/miles get a bit ridiculous.
Also doing mathematical operations gets weird if you have to add/subtract 4' 3/4" and 2' 1/8".
Surveyors, the subject of this article, actually use decimalized feet on their rods (IIRC) given the errors that inches and such can add. So while inches-feet may be useful in the wood shop, in other places it's a problem.
In general, the secret to happiness in customary units is to only ever work in a single unit and never convert between them. If you are working in construction, you probably only ever want to deal in inches. Ceilings are 96 or 120 inches tall, doors are 32 or 36 inches wide, etc etc etc. The moment you start using two units at once you are going to have a bad time, so if you pay attention people tend to only use one, even if it confuses people who don't know why doors are 80 inches high instead of 6 feet 8 inches.
Do people really have to be fully acquainted with the US culture and/or have done full research on Wikipedia before asking a question for them to be taken seriously?
Ten only lets you get a half or a fifth. It's a much sparser set of subdivisions.
The same is true if you compare a yard with a meter. There's nothing wrong with either measure, but a yard gives you a lot more factors to work with.
For instance, over here the standard size for a sheet of plywood is 1200 x 2400 mm.
See the recent presidental campaign of Lincoln Chafee. Or the very humorous "Stonecutters' Song" from the Simpsons (https://www.youtube.com/watch?v=QoSLiHKrzRU), in which a parody of the Freemasons confesses to covering up UFOs, sabotaging electric cars, and suppressing the metric system.
Tucker Carlson of Fox News thinks that metric system is a form of tyranny:
> CARLSON: Almost every nation on Earth has fallen under the yoke of tyranny -- the metric system -- from Beijing to Buenos Aires from Lusaka to London, the people the world have been forced to measure their environment in millimeters and kilograms.
* https://www.foxnews.com/transcript/can-the-us-continue-to-st...
Nothing new, with things going back to 1977:
> Dean Krakel thinks metric is more about Marxism than measurement. As director of the National Cowboy Hall of Fame in Oklahoma, Krakel is waging a war against metric on political grounds. In this 1977 clip from As It Happens, he says it reflects "the philosophical way communists want one of everything" - one world, one monetary system, one educational system and, now, one measurement system. "We're Americans, we're different. We're individualistic, we're strong," he says with passion.
* https://www.cbc.ca/archives/entry/is-the-metric-system-a-com...
As someone else noted, even if you look at the UK, they use the metric system more than the US does, but they also still use imperial units in a lot of contexts--including some we don't use in the US like stones.
Sockets, Allen wrenches, calipers, wrenches, drill bits, taps/dies. All customary. Its just what's available used here.
Obviously anything that can be measured in customary can also be measured in metric.
However, this means that really changing over to metric, meaning also using international standards for tools, screws, bolts, wires, etc., needs buying new tools and material. I'm not sure how many metric tools there are in a typical US workshop, but I can imagine that they are not too common at the moment.
Buying two things to do one job - as is tradition.
But if you're e.g. repairing existing equipment, then the customary and SI units are incompatible. Say, a 1/4 inch bolt head is too large for a 6 mm wrench, but too small for a 8 mm (which is typically the next step up from 6mm).
For this reason I had to buy some wrenches in customary units to fix a lawnmower engine.
Where is the problem? Buy a 6.35mm wrench for your 6.35mm bolt head.
Oh, and the speedometer and the odometer. The digital ones are probably counting meters and converting though.
Anyway, the US already has the metric system for things that matter; science and most manufacturing. For things with wide reach, like distance signs, and speed limits, and quantities at the grocery store, those tend to be in customary units, because the switching cost is too high for the benefit.
Plenty of things end up as imperial elsewhere in the world, though. My lathe and milling machine dials are graduated in thous (thousandths of an inch). I've seen those on YouTube channels in other countries.
EDIT: to all the people downvoting this comment without explaining why: you are actually proving my point.
You can _think_ that, or you can look outside at who’s protesting masks and which president is discouraging their usage.
Comments like yours which obfuscate basic facts like this are a perfect example of the kind of politicization I'm talking about.
[1] https://www.snopes.com/fact-check/us-tons-ppe-china/
But since then we’ve discovered that the overwhelming majority of spread has been due to direct transfer of the virus usually through water droplets.
The virus is too small for masks to stop them. But most masks are good enough to stop water droplets.
I'm Canadian, so I frankly have no direct stake in US politics, but if people on both sides can't agree on basic facts, then there's no hope.
Finally, I don't think the protection afforded is really all that "minimal" for numerous reasons, but the degree of protection wasn't the main thrust point of my post so I didn't (and still don't) want to go into it.
They knew there would be panic buying so they had this bit of subterfuge ready to go when a pandemic hit. The problem is that it is a bee-sting solution: one use only. Now that COVID19 has turned out to be far less dire than predicted, that bee-sting solution is gone and wasted. When we get a much more deadly pandemic, and we will, that tool will no longer be available. It's a shame it was used for this situation.
Sure, we could learn from this to always have enough PPE in stock but once this pandemic is over, every year there is going to be pressure on budgets on every level to cut the size (and cost) of PPE storage until it eventually shrinks down to what it was when this pandemic started.
If the medical community wants to regain some of its credibility it needs to stop circling the wagons and pretending this wasn't an intentional but well meaning lie they told the public. The longer it takes them to stop spinning the issue, the longer it is going to take them to regain the trust of the public, which will be detrimental to public health.
And yet you just did.
edit: thinking about it, it still doesn't make sense. The difference in distance would be about 2 cm over 10 km.
That's like nautical miles. If you're in a nautical context "mile" can be ambiguous, but if you're not then it's just the mile (well except there's also a survey mile).
Anyway the answer to your question is that in 1959 all non-metric units of length (and weight) were standardised internationally and defined in terms of metric units.
So outside of specific contexts (like surveying), an inch is 2.54cm and a foot is 12 inches of 2.54cm or 30.48cm. The "reference" unit is actually the international yard at 91.44cm, with there being 3ft to a yard, and 12in to an ft.
There's a midpoint between science and day-to-day (engineering). Anyway, if you want the US to continue its decline, such a can't-be-bothered attitude will help.
Edit: https://en.wikipedia.org/wiki/Mars_Climate_Orbiter
"However, on September 23, 1999, communication with the spacecraft was lost as the spacecraft went into orbital insertion, due to ground-based computer software which produced output in non-SI units of pound-force seconds (lbf·s) instead of the SI units of newton-seconds (N·s) specified in the contract between NASA and Lockheed."
Some people don't learn.
The mars orbiter loss was due to a failure to perform the necessary checks etc to make sure the mission was on track. Continue reading the section about the failure report. The discrepancy had been noted by humans and had been brought up, but the concerns were ignored because they failed to fill out the correct paperwork, and NASA takes responsibility for the loss, and does not blame lockheed.
The Mars Climate Orbiter was a research vehicle, no? It wasn't expected to make money I'm sure.
> was due to a failure to perform the necessary checks etc
Which would have been unnecessary had they both used the same units.
> and NASA takes responsibility for the loss, and does not blame lockheed.
I did not mention blame, why did you bring that up? Point is, had they used the same units this failure mode would have been closed off.
Almost every other nation uses the meter.
I don't think I'd have the mental arithmetic required to calculate things in terms of sixteenths!
The US system has lots of power-of-two factors in it, which suggests that it was born in the marketplaces and workbenches of people who did most things by hand, rather than our modern world where we design everything on paper first.
There does also seem to be a more extreme reluctance in the US to change to more widely adopted units and conventions (e.g. day/month/year) and if anything being one of the only countries left using non metric units seems to be a point of pride. About the only SI units the us seem to use relate to fields invented after science as a whole adopted it as standard (e.g. electrical units).
In one sense inches have a pleasant form of being subdivided into more easily divisible Power of two units but even that falls apart over small distances where they turn to ‘thousandths of an inch’ rather 1024ths. Useful in a world of pre-computer drawing because you could easily scale up plans but not particularly useful now.
It even goes beyond that though. Although this is on its way to becoming a largely academic point, the US also hasn't changed the bills and coins in common circulation for probably close to 100 years. We still have a penny, the dollar coin didn't take off (which I'm actually fine with as I prefer a bill for a $1-$2ish denomination), and you still can't count of being able to use $100 bill at a random store in the US.
This reminds me of the great Mythbusters who, to me, came across a bit stubborn to insist on US units -- it felt unsciency. I do understand that they wanted to use the 'normal' system that 'normal' people use -- I always recalculated all their psi and inches of mercury and fathoms per fortnight to SI.
So weird!
That means favouring Imperial over metric units. They'd lose the audience otherwise.
Kilometers? We have more than four million miles of road in the US, and lets rough-guess at the VERY least two speed signs each mile, one each direction. The real number on average is probably double that.
Then there are "mile markers" and every freeway sign that lists distance by miles.
Then there are cars that don't have highly visible kM speedometer markings.
Specific industries may shift to metric, and surely things like surveys probably could. But the total conversion? I would bet on many structural changes in the United States before that ever happens.
Voting reform, Constitutional amendments, DC and PR statehood, banning reality TV, all seem more likely than moving to metric.
Yes, you need to remember what the rather arbitrary seeming freezing and boiling temperature of water are, but that's not a big deal. And you actually get a finer grained measurement system without resorting to decimals. And you're less likely to need negative numbers for ordinary temperatures. (And, if you do, you know it's really really cold.)
Finally, while the Celsius degree size is used in a lot of technical calculations, the absolute scale isn't usually. Kelvin is used instead. So if anything were the "right" unit to use it would be Kelvin, but that would be fairly obviously silly for day to day use.
More like 10 miles on interstates and rural roads.
Perhaps mile markers could be re-used since the only have the number...
But yah, seems unlikely.
https://en.wikipedia.org/wiki/United_States_Metric_Board
[1] https://en.wikipedia.org/wiki/Metrication_in_the_United_Stat...
- 1 International Foot = 0.3048 m
- 1 US Survey Foot = 1200/3937 m ~= 0.3048006096 m
- 1 light-nanosecond ~= 0.2998 m
This while confusion over different types of feet is the entire reason why the metric system caught on like a wildfire. Before the metric system, every city used to have its own foot. Most, not all, were 12 inches, but they also all had their own inch.
I really cannot fathom how such an inconsistency as the disagreement over a unit that is nonstandard, weird and custom anyways could be allowed. The rest of the world got its act together roughly 200 years ago, admittedly with some leftovers, but those vanished over time...
Cars and machinery are Imperial as well but they have much lower lifetimes than houses.
I remember reading somewhere that just changing speed limit signs would cost more than 100 Billion to change and that was a modest estimate. I wish I could find where they did the math.