In general contexts, either 30, 33, or 35 cm are perfectly acceptable. When accuracy is required, we use millimetres anyway (or micrometres, or nanometres, or angstroms...).
I really don’t see how more integers factors is an advantage that outweighs the clusterfuck that are conversion factors between points, inches, feet, miles, and the other stupid units, or the fact that a nautical mile is not a mile.
Besides, there’s absolutely nothing stopping anyone from using “a third of a metre” as a unit. For example, it’s common to have a line for 1/3 l in measuring cups.
Using base-ten units, you can divide precisely by only 2 and 5. Not only are 1/3 and 2/3 not integer subdivisions of ten, they're not even precise decimals, but asre repeating.
Under base 12, there are precise subdivisions of 2, 3, 4, and 6 units. Under base 30 you can evenly divide by these as well as 10 and 15.
Under base 60 (a commonly used measurement base, a usage example will come to you in time), subdivisions are the above, plus 12, 20, and 30.
For practical use and arrangement, these can be highly useful capabilities.
In angular measure (base 360, 60*4), there are divisions which relate to trigonometric functions but not decimal scales. And to truly transcent the rational there are radian measures based on pi.
Under metric, you can still come up with precise divisibility, but only by disposing of the base-ten rationality. E.g., using 60cm or 60kg as a division basis.
Ultimately, base ten is an arbitrary anatomical accident.
But why does it matter? Why do you need 1/3 of a metre, and in which context would the 0.333...cm difference with 33 cm matter? This is smaller than the measurement error with common instruments we are likely to use in our daily lives. And there's nothing special about 1/3 m as a physical length, there's no reason why 1/3 m would be more useful than 0.30 m. I am not trying to be flippant, but I never got an answer to that question.
Also, the conversion factor matters only when you actually convert values, not when you measure them. Again, there is nothing stopping anyone from using 1/3 m, or 1/42 m, or 1/π m as units, or even giving them fancy names. As a matter of fact, this is exactly what you do when you use an inch: by definition 1 in = 127/5 m.
In practice the number of dividers is utterly insignificant, because using all the multiples of a centimetre (and millimetres if you're pushing it) is trivial. So getting a feeling for the difference between 32cm, 33cm and 34cm is very easy, and you end up with much better accuracy than if you limit yourself to eights, sixths and quarters.
It's also the same scale down from sub-atomic scales all the way to the whole planet (I understand the use of AU, light-years and parsecs, as the SI prefixes tend to become ridiculous at these scales).
Care to write the proposal?
Outside the US, almost nobody has non-metric tools. So Imperial stuff is unacceptable for export.
Home Depot creates the illusion that the US is mostly Imperial. They don't stock metric fasteners. One day I was in a Home Depot on a Sunday, and a Chinese woman was desperately looking for some screw she needed to repair some crucial appliance in her restaurant. It was metric, of course, and Home Depot didn't have an ordinary metric screw.
How far is one thousand feet?
it may be easy for us to think in fractions with repeating decimals, or irrational numbers ,it is super hard for computers which do Floating Point arithmetic, fractional arithmetic is not common from assembly, higher languages, or libraries we typically use to develop apps.
This is why engineering is always in SI, and errors happen in the interface between people refusing to change,
Given that most computing well happens in computers, It is lot more convenient for us change to a system computers understand, rather than keep a system we understand
Um, what? Computers understand base 2 (or 16 for compactness), not base 10. A centimeter is not 0.00999999977648258209228515625 meters.
The U.S. foot mentioned in the article is defined as 1200/3937 of a meter which is 0.304800609601... depending on the precision you want the number will keep changing.
In Imperial you will find a lot of unit conversions like this which will need fractional arithmetic in base 10 like a foot is 1/3 yard etc. You will not find that in SI units as the base(10) and unit conversions (10) are the same making the definitions precise and avoid fractions between unit conversions
Sadly several significant NASA failures would disagree.
The US actually originally planned to use metric, but if I recall correctly, the guy thomas Jefferson had invited to bring metric standards to the US ended up getting captured by pirates, so we never had the standards needed to switch and just didnt bother. But he time metrification was sweeping the globe, we'd already industrialized.
And one advantage that imperial has over metric - there are more multiples of 12. 12 is more divisible. A third of a foot is 4 inches, while a third of a meter is 33.333333333333333 etc centimeters