Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by IgorPartola on Monday February 03, 2014 @05:01PM
(#7173812)
Yup, it's pretty cool. This was one of the most impressive demo's my physics professor did in our freshman physics class. The point is that as the magnet is falling through the copper tube it creates an electric current which then creates a magnetic field in the opposite direction of the magnet's movement. In other words, this is the practical application of the Right Hand Rule [1].
Two fun facts about it: first, if you cut a small notch along the length of the tube, this will not happen as the current cannot go around the tube.
Second, imagine a superconducting tube with an extremely powerful magnet right in the center of it. Now, try to get the magnet out without cutting the tube.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by taliesinb on Monday February 03, 2014 @05:37PM
(#7174025)
You can also think of it as magnetic flux lines encountering "drag" as they pass through conductors.
The limiting behavior of this view is in type II superconductors, which entirely "pin" flux lines -- they present an effectively infinite resistance to the movement of flux lines. That's why a magnet levitates over such a superconductor. [1]
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by rbanffy on Monday February 03, 2014 @06:22PM
(#7174294)
Lucky kids. When I was in school, the only commercial superconductors were liquid Helium cooled Niobium-Titanium alloys, something not many classrooms could handle. ;-)
Luckily, when I got to programming, we already had zeroes and ones. Imagine our predecessors who had to do it with uppercase o's and lowercase l's...
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by IgorPartola on Monday February 03, 2014 @08:05PM
(#7174787)
I forget what type we used but it was cooled by liquid nitrogen. That prof. used lots of magnets and superconductors in his research, some cooled by Helium-3. Now that stuff is expensive.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by fnordfnordfnord on Monday February 03, 2014 @11:13PM
(#7175451)
The high-temperature ones were probably Yttrium-Barium-Copper-Oxides (YBCO) I've seen this demo done with them. The magnet's motion is almost undetectable, they appear suspended in the copper pipe until they start to warm up.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by whatshisface on Monday February 03, 2014 @06:04PM
(#7174189)
The inverse square law of force strength falloff would make it very hard to scale this linearly, that combined with the fact that weight increases with the cube of size means that the magnets involved would have to be incredibly strong.
Not impossibly strong mind you, if magnets can hold a hundred ton train car off the ground I am sure they could slow the fall of an elevator.
I'd not want to be inside that elevator with anything magnetic in my pocket, though.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by IgorPartola on Monday February 03, 2014 @08:01PM
(#7174758)
Yup, magnetic field falls off as 1/(distance3). That's why being 5 feet from an NMR magnet is bad news bears, while being 8 feet away is fine (numbers made up, do not test). I remember seeing signs all over the place at our labs at the uni, saying to not enter if you wear a pacemaker or if you are wearing a wrist watch.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by e12e on Tuesday February 04, 2014 @01:35AM
(#7175865)
But it's possible to the same experiment with a battery and an electro-magnet, isn't it? (Not sure how the power-density of lithium-ion batteries would relate to floating 80 kgs down a tube... but seeing as people have demonstrated hover-boards, it should be doable) ? Assuming the purpose is a) float down tube, and b) SCIENCE! -- and not c) with rare earth magnets...
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by dfox on Tuesday February 04, 2014 @08:23AM
(#7177189)
Even hard disks are not affected by external magnetic field in the way most people expect. Strong magnetic fields interfere with the operation of drive (seeking voice coil) but accidental erasure of data on platters by external magnetic field is relatively improbable.
Generally most of the damage caused by strong external magnetic fields to any electronics are caused by second order effects, i.e. something gets confused and causes data-destroying failure.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by vecter on Monday February 03, 2014 @06:55PM
(#7174471)
Technically, this has nothing to do with the Right Hand Rule. That is just a human convention to assign a positive and negative signs to a particular direction. Electromagnetism doesn't care about our silly human notations.
No one is comparing or likening charge to some other thing. We simply give opposing charge "directions" a name. Everyone uses the name. It's a convention.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by nrivadeneira on Wednesday February 12, 2014 @03:47PM
(#7227146)
The comparison that is being made is the direction your thumb points when your fingers wrap in a particular direction. It's not merely giving it a name - it's specifically likening the vector to the relative orientation of your fingers. That's why the comparison is memorable. If it were merely a name with nothing that it is compared to, it would not be memorable nor helpful.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by reddog9287 on Monday February 03, 2014 @11:38PM
(#7175535)
Yeah I'm actually pretty surprised that this made it to the front page. Pretty novel and I thought more people would know about it (being a typical physics class demonstration). Cool nonetheless.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by sp332 on Monday February 03, 2014 @06:38PM
(#7174385)
I would wrap an electromagnet around the magnet in the tube, then turn on current to create a field in the opposite direction. Hm... If I pulse the field quickly, maybe it would even remove itself :)
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by aunty_helen on Monday February 03, 2014 @11:24PM
(#7175481)
The problem with the youtube link however is that any video with 'magnet' in the title brings you uncomfortably close to thousands of youtube nutters posting about perpetual motion machines.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by fnordfnordfnord on Monday February 03, 2014 @05:08PM
(#7173864)
Lenz's Law in action, lots of good demos online, or take any strong magnet and move it rapidly while in close proximity to any non-magnetic conductor (brass, copper, aluminum, etc.) You can feel the force exerted by the generated field. Automobile speedometers used to operate on this principle.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by baq on Monday February 03, 2014 @05:01PM
(#7173815)
be very careful when handling such powerful magnets - if you have something metalic on you, they might jump off the table and smack you really hard. bones will be broken.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by salgernon on Monday February 03, 2014 @05:17PM
(#7173913)
The latch on our clothes dryer broke; the door would no longer snug up and maintain the seal or necessary pressure for the safety switch. I now have a 2x2x1" rare earth magnet holding the door shut against the dryer frame. Its strong enough to keep the door snug, but I can still open the dryer door with a good tug.
I'm not sure why I had a 2x2x1" neodymium magnet laying around, but I'm glad I did.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by 72deluxe on Tuesday February 04, 2014 @04:29AM
(#7176396)
It is interesting that with the neodymium magnets being rare earth materials and apparent limits being placed on their mining/import/export etc., the price of them has sky-rocketed. There was a time when all the bass cabinets for bass players were getting smaller and smaller and lighter and lighter thanks to these magnets because it meant you could have a smaller speaker driver (hence less weight) but now they're having to resort to the heavier speakers again.
A shame really! I never did buy any light cabinets but always wish I had! At least Class D amplifiers are doing the rounds and so massive wattage amplifiers are now tiny and lightweight.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by noir_lord on Monday February 03, 2014 @07:07PM
(#7174537)
Copper compared to many metals isn't particular expensive per KG, it is just relatively expensive in the class of metals that we use a crapload of (for example aluminimum is around $1.8 per KG) it is still much cheaper than tin at ~$22.
The main reason that copper is so valuable is it has so many uses and is very easily recycled(I saw an estimate that said 80% of all the copper ever mined is still in use) so holds it's value (You often get 90-95% of its commodity value for recycling).
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by jonnathanson on Tuesday February 04, 2014 @12:28AM
(#7175687)
This.
Copper is always in demand, has a bajillion uses, and can be scrapped and reworked very easily. This is why you hear about meth heads stripping copper wiring out of old homes. It's not that the copper is incredibly precious. It's that the copper is so easily liquefied into cash at any number of one-stop, no-questions-asked destinations.
Copper is expensive as a building or product material, not in and of itself, but in relation to many of the alternatives in any given application. Small differences in component costs, scaled over large supply chains, add up to huge differences in margin at the macro level.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by 72deluxe on Tuesday February 04, 2014 @04:31AM
(#7176405)
Here in the UK there is constant copper theft going on. The church up the road here had their roof pinched 3 times in 6 months. But it is good that if you have new heating (with a combi boiler) and your condenser boiler taken out, that massive water tank you had in the loft to hold water now suddenly turns into money!
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by dfox on Tuesday February 04, 2014 @08:43AM
(#7177283)
Copper and aluminum are two commonly used metals that are manufactured by relatively costly process that at the same time allows essentially complete recycling.
On the other hand there are not that many uses for pure copper (most of them are electricity related) as there are many other metals or copper alloys that are significantly cheaper.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by adsr on Tuesday February 04, 2014 @09:32AM
(#7177570)
That may be, but most of that markup is probably in the part it self, if you compare to a steel tube of the same dimension you'll see an indication of that. I was going by the current price the metal trades for, that is, a ballpark figure as something to "begin to imagine" what it could cost based on the material alone.
6.5 inch outer, 5.5 inner, 12 inches tall (twice what the video shows) for only $700. So I'd say $300 would be a good estimate of what you can get that piece of copper for.
That magnet is also probably pretty expensive, that's a big one.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by refurb on Monday February 03, 2014 @08:14PM
(#7174829)
The interesting part is that NMR magnets often have a second magnet within them that creates an opposing force outside of the bore of the NMR (or at least they used to do it that way).
If you notice on the video the yellow chain which keeps ferrous metals away from the instrument isn't really that far away. Also, when he drops the aluminum disc, it actually starts to accelerate after falling only a foot.
Because of the "counter" magnetic field produced, NMRs have a much small/weaker external magnet field that you'd expect.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by asteli on Monday February 03, 2014 @06:26PM
(#7174310)
This effect gets used in modern trains and roller coasters in the form of linear eddy current brakes. In practice, this looks like an electromagnet that's held just over the rail.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by dfox on Tuesday February 04, 2014 @08:48AM
(#7177307)
With electromagnet and iron rail the same effect is used for almost an century on streetcars under the name "electrodynamic brake". Idea is that single assembly combines this for small braking strengths and friction braking for complete stop (the electromagnet is on springs and can come into complete contact with rail, which is used as equivalent of parking brake).
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by ta_tatata on Tuesday February 04, 2014 @05:16AM
(#7176547)
So it's ok to post links to third party instead of the original content now ?
here's the link to the video instead of this portal profiting from it: http://www.youtube.com/watch?v=keMpUaoA3Tg
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by noonespecial on Tuesday February 04, 2014 @02:26AM
(#7175968)
He had the large square magnet and the large round one within arms reach of each other so that he could swap them with one hand without walking away. That kind of freaks me out a little.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by IgorPartola on Monday February 03, 2014 @05:19PM
(#7173928)
You really don't need anything as fancy. A small magnet and a narrow aluminum tube will do just fine. It won't be quite as impressive, but drop a pebble from the same height not through the tube and watch the delay for the magnet dropping. A four foot length of tube about 1/2 to 3/4 inch in diameter would do nicely.
Edit: try cast iron if you must have a big pipe. It's likely to be much cheaper. The thickness shouldn't make much of a difference either, so maybe even a cooking pot with a cut off bottom would work.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by mark-r on Monday February 03, 2014 @09:41PM
(#7175152)
Would a thinner wall tube work just as well? It seems the effect depends on electrical conduction which should be sufficient even with much less copper. Or does it depend on how many flux lines are hitting the copper cross section?
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by Loughla on Monday February 03, 2014 @05:18PM
(#7173917)
Not sure where to get one at that thickness or diameter, but a specialized plumbing supply company can get you most standard size and diameter of copper piping.
That one is huge, though. In theory, this should work with smaller, but powerful magnets, and thinner tubes, correct?
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by Loughla on Monday February 03, 2014 @05:55PM
(#7174145)
You can't make a permanent magnet stronger, I believe. I worded that weird. I meant a smaller magnet, that is powerful, and a smaller tube. My brain doesn't work so well sometimes.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by dfbrown on Monday February 03, 2014 @06:22PM
(#7174293)
I don't think the spinning should have any effect on the speed. Only the vertical movement would create eddy currents. It could be he does it to keep the magnet stable as it falls (like spin on a football).
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by tedsanders on Monday February 03, 2014 @05:42PM
(#7174052)
No. Because copper isn't ferromagnetic, it will not be magnetized by the magnet, and consequently the magnet and the copper will not be attracted to each other. (In fact copper is diamagnetic, so it will actually slightly repel.)
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by tedsanders on Tuesday February 04, 2014 @02:45AM
(#7176037)
A lot of reading, plumbing, and electrical work. But when things are running smoothly, we grow complex oxide crystals using pulsed laser deposition and then measure their magnetism with SQUIDs (superconducting quantum interference devices).
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by 556790 on Monday February 03, 2014 @10:57PM
(#7175404)
I wonder, with a tube that is of sufficient thickness and a magnet of sufficient strength, would it be possible to levitate the magnet inside the tube?
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by omegaham on Monday February 03, 2014 @11:34PM
(#7175516)
The best way to do it is with a superconducting magnet.
And no, it doesn't quite levitate, but it takes a very long time for it to fall through. I think the video we watched in high school physics class had it take about fifteen seconds to go an inch and a half.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by cLeEOGPw on Tuesday February 04, 2014 @01:40PM
(#7179392)
As magnet falls, it is slowed down, this drag is created because magnetic forces are resisting gravity. So after some time, magnet loses that force, I just wonder how long does it take. It can't fall slowly like that forever.
Two fun facts about it: first, if you cut a small notch along the length of the tube, this will not happen as the current cannot go around the tube.
Second, imagine a superconducting tube with an extremely powerful magnet right in the center of it. Now, try to get the magnet out without cutting the tube.
[1] http://en.wikipedia.org/wiki/Right-hand_rule
Edit: Of course, there's nothing special about the tube being made of copper. Any conducting substance will do.
The limiting behavior of this view is in type II superconductors, which entirely "pin" flux lines -- they present an effectively infinite resistance to the movement of flux lines. That's why a magnet levitates over such a superconductor. [1]
You can even image these "vortices" directly [2]
[1] http://en.wikipedia.org/wiki/Flux_pinning [2] http://www.youtube.com/watch?v=7_ZgiumS41Q
Luckily, when I got to programming, we already had zeroes and ones. Imagine our predecessors who had to do it with uppercase o's and lowercase l's...
Uphill. Both ways.
Any non-magnetic conducting substance that is. Otherwise the magnet will just stick to the tube wall.
It'd be completely impractical, of course, but a whole lot of fun.
Not impossibly strong mind you, if magnets can hold a hundred ton train car off the ground I am sure they could slow the fall of an elevator.
I'd not want to be inside that elevator with anything magnetic in my pocket, though.
Because there aren't any magnetic monopoles, I believe in ordinary circumstances the relationship is inverse cube of distance. Reference: http://www.newton.dep.anl.gov/askasci/phy05/phy05629.htm
It would take a hell of a lot of magnets to strap to a person to allow them to jump down a copper pipe though.
[1] http://en.wikipedia.org/wiki/Electrodynamic_tether
And at the end of the ride, you want to take a selfie and email it to all your friends but you can't because your phone is fried.
Generally most of the damage caused by strong external magnetic fields to any electronics are caused by second order effects, i.e. something gets confused and causes data-destroying failure.
There is no "technically..." nonsense! It's not a human convention either - it's an anthropomorphic metaphor.
http://en.wikipedia.org/wiki/Metaphor
No one is comparing or likening charge to some other thing. We simply give opposing charge "directions" a name. Everyone uses the name. It's a convention.
This digg page is blogspam.
I'm not sure why I had a 2x2x1" neodymium magnet laying around, but I'm glad I did.
The same reason why there's beer in the fridge, condoms in the night stand and a guitar pick in your pocket: just in case.
A shame really! I never did buy any light cabinets but always wish I had! At least Class D amplifiers are doing the rounds and so massive wattage amplifiers are now tiny and lightweight.
The main reason that copper is so valuable is it has so many uses and is very easily recycled(I saw an estimate that said 80% of all the copper ever mined is still in use) so holds it's value (You often get 90-95% of its commodity value for recycling).
Copper is always in demand, has a bajillion uses, and can be scrapped and reworked very easily. This is why you hear about meth heads stripping copper wiring out of old homes. It's not that the copper is incredibly precious. It's that the copper is so easily liquefied into cash at any number of one-stop, no-questions-asked destinations.
Copper is expensive as a building or product material, not in and of itself, but in relation to many of the alternatives in any given application. Small differences in component costs, scaled over large supply chains, add up to huge differences in margin at the macro level.
On the other hand there are not that many uses for pure copper (most of them are electricity related) as there are many other metals or copper alloys that are significantly cheaper.
http://www.onlinemetals.com/merchant.cfm?id=1288&step=2&top_...
[edit2: A stripped wire, that is - not one with insulation -- which would be more suitable for making a spool]
You can try that with aluminium if cooper is too hard to get. You'll probably get better results.
6.5 inch outer, 5.5 inner, 12 inches tall (twice what the video shows) for only $700. So I'd say $300 would be a good estimate of what you can get that piece of copper for.
That magnet is also probably pretty expensive, that's a big one.
If you notice on the video the yellow chain which keeps ferrous metals away from the instrument isn't really that far away. Also, when he drops the aluminum disc, it actually starts to accelerate after falling only a foot.
Because of the "counter" magnetic field produced, NMRs have a much small/weaker external magnet field that you'd expect.
More reading: http://en.wikipedia.org/wiki/Eddy_current_brake
Here's the answer: http://youtube.com/watch?v=KFPvdNbftOY
This might also pique you interest http://www.youtube.com/watch?v=_dQJBBklpQQ
http://www.youtube.com/watch?v=A1vyB-O5i6E&list=PL8E7ED16454...
The physics behind this are explained here: http://en.wikipedia.org/wiki/Magnetic_levitation
Edit: try cast iron if you must have a big pipe. It's likely to be much cheaper. The thickness shouldn't make much of a difference either, so maybe even a cooking pot with a cut off bottom would work.
"Watch this!" ....CLINK
Not on the same scale, but appears to be designed to demonstrate the same concept.
That one is huge, though. In theory, this should work with smaller, but powerful magnets, and thinner tubes, correct?
I can only find thin pipes for plumbing online, but I would really like the think one.
Source: I am a magnet scientist.
Judging entirely by the name, that sounds awesome :D What do you do all day?
http://www.bicycleman.com/recumbent-exercise-bikes/images/Ma...
And no, it doesn't quite levitate, but it takes a very long time for it to fall through. I think the video we watched in high school physics class had it take about fifteen seconds to go an inch and a half.
If the tube were spinning, the magnet would begin spinning also, but it wouldn't levitate.