Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by deletes on Monday February 03, 2014 @05:14PM
(#7173899)
Where can you buy something like that. A magnet is around 150$, but I have no idea where to get a copper tube of that thickness.
[ Parent
| on HN ]
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by IgorPartola on Monday February 03, 2014 @05:19PM
(#7173928)
You really don't need anything as fancy. A small magnet and a narrow aluminum tube will do just fine. It won't be quite as impressive, but drop a pebble from the same height not through the tube and watch the delay for the magnet dropping. A four foot length of tube about 1/2 to 3/4 inch in diameter would do nicely.
Edit: try cast iron if you must have a big pipe. It's likely to be much cheaper. The thickness shouldn't make much of a difference either, so maybe even a cooking pot with a cut off bottom would work.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by klodolph on Monday February 03, 2014 @05:29PM
(#7173980)
Iron is ferromagnetic, so the magnet will stick to the tube and not fall through.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by IgorPartola on Monday February 03, 2014 @05:38PM
(#7174029)
Ah, but of course you are right. Then aluminum it is!
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by evan_ on Monday February 03, 2014 @05:25PM
(#7173959)
it's a less impressive demo if the pipe is made out of something ferrous, like cast iron.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by 72deluxe on Tuesday February 04, 2014 @04:33AM
(#7176412)
But it would be amusing!
"Watch this!" ....CLINK
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by mark-r on Monday February 03, 2014 @09:41PM
(#7175152)
Would a thinner wall tube work just as well? It seems the effect depends on electrical conduction which should be sufficient even with much less copper. Or does it depend on how many flux lines are hitting the copper cross section?
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by jules on Monday February 03, 2014 @05:47PM
(#7174084)
It also works with a small neodymium magnet which can be bought for less than $1 and a small copper plumbing tube which costs about the same.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by dfox on Tuesday February 04, 2014 @08:54AM
(#7177339)
With thin tube the effect is not noticeable on the outer surface. Essentially, thicker tube means more pronounced effect.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by deletes on Monday February 03, 2014 @06:08PM
(#7174212)
Of course, but the size makes it fun.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by ingebretsen on Monday February 03, 2014 @10:08PM
(#7175244)
I found a kit (magnet + copper tube) here: http://www.teachersource.com/product/645/electricity-magneti...
Not on the same scale, but appears to be designed to demonstrate the same concept.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by Loughla on Monday February 03, 2014 @05:18PM
(#7173917)
Not sure where to get one at that thickness or diameter, but a specialized plumbing supply company can get you most standard size and diameter of copper piping.
That one is huge, though. In theory, this should work with smaller, but powerful magnets, and thinner tubes, correct?
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by deletes on Monday February 03, 2014 @05:22PM
(#7173948)
I don't think you can make a permanent magnet any stronger as it is. There is a certain limit. I think the size matters in this case.
I can only find thin pipes for plumbing online, but I would really like the think one.
Re:What Happens When You Drop A Magnet Inside A Copper Tube ...
by Loughla on Monday February 03, 2014 @05:55PM
(#7174145)
You can't make a permanent magnet stronger, I believe. I worded that weird. I meant a smaller magnet, that is powerful, and a smaller tube. My brain doesn't work so well sometimes.