>the process is long and arduous and the risks are huge.
Plenty of sub 28nm chips Fabs are inside EU. And more are coming online. This isn't a long or arduous process.
Which are those "plenty" sub-28nm fabs exactly?
Only Global Foundries Dresden AFAIK goes down to 22nm and 12nm and I think that's by far the most cutting edge fab currently in EU.
TSMC's future Dresden fab starting construction next year(hopefully) will start making chips at 28nm and 22nm in 2027(!), with plans to go to 16nm and 12nm in the further future.
Your view on EU cutting edge semi fabrication is very optimistic.
Well well, how the turn-tables.
If European countries wanted the tech bad enough, they would find ways to get it. The problem is not the know-how but the massive investments needed to productize it.
Are you telling me the EU, the richest block in the world, has less money to spend on fabs than TSMC, as if the EU is scrapping for change behind the couch cushions.
If only you knew how much money the EU wastes through various useless and vanity projects that accomplish nothing except getting certain well connected people rich, we could have built 3x TSMCs.
But unlike Taiwan, we're lacking in visionary well educated tech leaders, and drowning in clueless politicians and established gentrified industry players who lobby the funds go to their projects instead.
That could very well turn out to be the case in practice, not for lack of money, but inability to provide the promised subsidies according to Financial Times:
https://www.ft.com/content/898454ba-8fc2-4b00-a14f-5f9ee152d...
To me it just seems like relying on government funding to drive innovation in sectors where private companies have incentives to compete is extremely foolish.
I didn't say we don't have the money, but that it's a problem to commit the money. It's basically the norm that EU countries unanimously agree that "something should be done" on a certain issue, but then disagree on how much it should cost and where the money should come from. This gets more and more complicated the bigger the cost is (and this is an expensive idea) and the farther we are from the regular 7-year-budget process (it was last agreed in 2020, so jockeying for big items will probably resume in 2025-26).
I don't disagree on the overall lack of vision in European political classes (hardly a fault of the EU, it's common to basically all countries and all levels of government), but even a visionary leader would have to work hard to get agreement on such a big project.
EU is turning back towards Austerity 2.0: Electric Saveroo these days.
It's a question of supply chains - not tech.
https://cordis.europa.eu/project/id/190183836
But AFAIK this is just a small part of large amount of multiple projects.
In other words; the life cycle of a 40nm fab is:
1997: start building fab
2000: fab goes online and starts producing CPUs
2006: fab upgraded
2012: fab switches from CPUs to video and memory controller chip sets
2018: fab switches to USB controllers and embedded chips
2019: fab offline for 2 months because an antiquated but critical part is broken and is only brought back online because another similarly old fab went offline and sold off their parts
2020: fab shut off because of covid
2021: fab found to be a write-off because too many things broke while fab was offline.
So if you skip straight past the profitable phase, you end up spending billions of dollars to make a fab that makes $0.30 parts, and it'll never be profitable unless those parts are $10 each, which in turn makes the product they're in unprofitable.GlobalFoundries (formerly AMD fabs) created a brand-new 22nm planar process specifically for older chips as an upgrade to other company's 28nm processes.
Profits seem possible if you approach it the right way.
Of course upgrading an existing older "sunk-cost" fab to 28nm production will be profitable, but not building a new one from scratch just for that same older node.
(Or you prepare for having to go to eBay for working parts. https://www.nytimes.com/2002/05/12/us/for-parts-nasa-boldly-...)
I think it's more like they're only profitable if the equipment is already paid for. And even then the margins may be low.
If entering that marketplace requires competing with them, then I am not sure anyone that is not already in the market can ever win. The margins are too low and the startup costs are too high.
Government intervention seems to be the only possible solution, and that option hardly sounds viable when considering that cartel’s collective lobbying power.
I can afford to sell gazillions of chips at $0.08 per chip if I'm running a fab I didn't pay to build. I'm only (barely) paying for the inputs. When Stan, the last guy who understands how to run the widget verifier, or Elaine, the last lady to understands how to run the polishing machine retire, I'll have to close up shop.
Those $0.08 per chip devices have been absurdly subsidized in that a replacement infrastructure to make them would require that they cost $10 per device, and the ecosystem of things built on $0.08 chips isn't viable in a $10 per chip world.
In order to have a fab make $0.03 per unit devices, you first have to have the fab spend 10 years making $300 per unit devices, regardless of the underlying node size of those $300 per unit devices.
Likely you couldn't even go back and make a fab that makes large volumes of 60nm-90nm node sizes at all, for any amount of money, because the equipment to do this (new) hasn't been made in 2 decades and no company is willing to invest the money to make new crappy old equipment.
It's not a nefarious oligopoly as much as a synchronized "run the asset to failure" lifecycle of the infrastructure.
How much does it cost to make a 300 year old tree?
Aside from your main point, I found this an interesting thought exercise thinking about cost of air, sunlight, soil, water and then 300 years of security
If you're not going the obscurity path then you'd really want to scale it up - there's not much difference between security for one tree and security for 100 trees.
I believe your argument assumes that there is a fixed cost to produce even 180nm or 350nm ICs that hasnt changed since the first one was produced.
We still need 300 years for a 300 year old tree, but 25 year old technology might now be relatively easy to build if we start from scratch.
What was high tech then might be relatively easy to solve now. One example might be https://github.com/circuitvalley/USB_C_Industrial_Camera_FPG... being open source instead of a multi year, multi million dollar project.
Even if it is 10% the cost of making the each of the individual components involved in making a relatively simple 90nm chip, you're still looking at vast costs.
If you're talking about making 30 chips in a university fab, sure, I'll concede that it is "possible" but if you're talking about propping up an industry built on products that require a herd of standardized "$0.30" parts made on legacy 90nm fabs, that ship has sailed.
Update your BOM and recertify or raise your costs by an order of magnitude.
But realistically this is a matter of going back far enough, to lower the cost far enough? 10% are a good start but to stick to the topic, physical gyroscopes from decades ago are now replaced with MEMS ICs where the reduction in cost is magnitudes more then down to 10%. At a certain point the reduced cost makes it viable. The question is just has it been long enough?
While we wont get 90nm cheap enough, the question is what can we do on a hobby level (vs academia)? Because going from there (neglectable cost and technological requirements) to mass production will at some point be cheaper then the cost of setting up reproducible tooling for older high tech systems.
I am likely still off with 180nm, but there should be a level at which this makes economical sense. A level that gets cheaper to reach with technological progress / time.
My initial argument is that while you cant compete with ASML products in 2023, you will be able to economically compete with some of their older products once you go back far enough.
Given the physical limitations, as well as the problems we have with code base security it might be time to aim for cheaper production of something in the region of 180nm instead.
Looking at how old much of the standard weaponry used today is (TOW 50 years with an actual physical gyroscope, Javelin still 25 years³), the demand from the military alone should cover the initial cost. Especially if you look at the ludicrous prices western countries payed for even dumb artillery shells.
¹ Texas Instruments DMD from a DLP projector from @AppliedScience https://youtu.be/9nb8mM3uEIc?t=428
² Explanation of MPU-6050 from @BreakingTaps https://youtu.be/9X4frIQo7x0?t=664
³ Teardown of both from @lelabodemichel5162 https://www.youtube.com/watch?v=s7-6hgX7-zQ
Sorry for late edits
I don't really understand this claim at all. Chips are not exactly fungible, unless you force your local companies to use you "state sponsored chips" in their products just being able to produce "chips" wouldn't be that useful. What are you going to do with them?
If the fab was barely profitable before shutting down, it doesn't take much to total it. Fabs are full of machines that cost tens of millions of dollars when they were new and there are simply no spare parts of vendor support for them now, and you can't just swap in a modern replacement. Fabs are full of extremely sensitive environments (no dust here, acid that will kill you if you touch it there, constant temperatures, no humidity, etc). If any of that is compromised, it's now just a toxic waste dump.
Again, I have no specific knowledge in this domain, but I imagine most of the time the owner's happy enough just to walk away from the headache.
A new crew will eventually work it out, but there's a lot of trial and error getting to the right bake time/temps, spin rpm, etc, etc. Yield and rework suffers while they do that.
Once you shut off the dust extraction, you may just end up with too much dust collected in the equipment to make it utterly useless.
Such as? I can't really think of any benefit besides providing jobs and funding for contractors (so kicks backs etc.)
Then again it's not particularly surprising, the EU is well know for wasting massive amounts of money on all sorts of nonsense while ignoring things that actually matter.
No, but I trust you. However the US tech industry is doing just fine without too much government funding and intervention so it's not such a huge issue (in this specific area of course, not in general)
We've got the race to 7-5-3-2nm for high-end parts, and then a couple generations back on support chips and lower-performance cheap parts.
Then you've got the dead zone. Is there a meaningful active use case for 1-micron processes anymore?
But then you get to perennial embedded-market stuff (Z80, 65C02, 80186) originally built on 40-year-old processes. And going even further, you have stuff that's a handful of transistors on a die that was probably drawn with markers for the original lithography; I'm not sure we'd even use numbers to describe that process. How does that stuff get made anymore? It can't all be draining down old stock.
I can't imagine it's cost effective to use modern-fab capacity to manufacture Z80s, 555s, or 74LS04s at their original die sizes. And if you shrunk them to put a million on a wafer, even assuming that's feasible, you'd change their performance characteristics in ways that might break long-established specs and contracts.
In today's world, it would seem more sensible to just stockpile enough of all the components for 5-7 years of tank production, knowing that if your enemy tries any evil tricks then you have half a decade to figure out how to redesign or make the components yourself.
Keep a close eye on anything that looks like an antenna and it isn't so bad having the enemy backdooring your chips either.
Buy enough parts for expected product life, make good use of the time you didn't waste on scrambling, and when your product is EOL sell any left-over parts on the secondhand markets.
I'm not sure what does that mean? What specific chip needs that would that solve and what benefits would this provide? If those chips are not competitive nobody would buy them? So what would governments do with them? Stockpile them for the future just 'in case'?
The problem is that unlike grain or oil chips are not exactly fungible if your military production or other vital industries lose access to their current suppliers they wouldn't be able to use your slow, outdated and overpriced chips anyway (and forcing them to do that under normal circumstances would make your products less competitive).
> BOM for the challenger tank
How many other components does the Challenger tank contain (IIRC it's not really produced anymore anyway) which are not manufactured in the UK? In any case stockpiling necessary chips etc. just in case the UK won't able be able to acquire anything from the US/Germany/etc. seems like a practical approach than trying to develop everything inside the country.
My take on this is
1. this is less about competitiveness at the cutting edge and more about security and economic on-shoring
2. building chips on-shore at the 40-20nm level massively reduces risk, increases the likelihood smaller states can build locally and solves for most chip needs
3. chips we need are rarely the cutting edge AI stuff. The vast volume of chios will go in as controllers on screens, USB connectors and so on. Building plug and play alternatives will give local manufacturers choices, and incentives will help.
4. the big win is security. Does the CEO of sensitive company, the head of security services and the general in charge of procurement use keyboards, cpus motherboards and monitors made from open source chips manufactured in a trusted nation? What is the BOM for the challenger tank - how many chips in there that are made by whom and ...
the process is long and arduous and the risks are huge.
But we make tanks from steel other materials made in "favoured nations" - surely the same applies to silicon?