> While this is admirable as a proof of concept, I suspect that moving the price point up to, say, $30 could give a much more useful and hacker-friendly device.
I agree. I think this project proves that ultra low cost is viable. Now relaxing the constraints a bit to add RAM and WiFi could iterate it right into an optimal spot.
I wouldn't want to go much farther than RAM and WiFi, though. It's too easy to let these projects turn into a slippery slope.
If the pi actually is being used it'll definitely draw 2.5-3A, so a 2Ah battery won't last very long. I'm not really up to date on li-poly (the flat pack lithium style batteries), perhaps there's some that would be ok for a handheld with ~3A or more of draw, but again, it's another $20-$40 for batteries that are usable for a handheld. There is the pi arcade hAT or whatever, that's about $15+ iirc. 3d print a case, if you already have a printer that's just time and materials, otherwise you're gunna pay $20 for a case design and print that actually feels nice, again.
At a certain point, the steam handheld device might be a better bet, since it'll have a warranty (don't laugh!) and a support team (okay laugh a little).
All of this could be irrelevant because perhaps the pi zero does everything people want, and that's dirt cheap and also probably uses way less power.
LM2596 costs <$1 and it powers my rtl-adsb for 4 years so far (yes, this is in step-down mode, but you either want a 2S/3S battery anyway, or you use the similar step-up chip).
I have a bunch of "QC3.0/3A Buck converters" for 6-36VDC to USB-A, maybe i should try to run a pi on a SLA Gel 12V battery.
I don't disagree with you on the wireless, it would be nice to have built-in. But, all the same, there is a USB port, so it's at least possible.
This would be great for plugging in in random places and making sure things work and initializing/configuring/troubleshooting various devices that for some reason cannot be reached over the wifi.
As far as complaints, I would go the other way -- why does it not have an Ethernet port. Yes you can use an Ethernet to usb adapter, but it would be so much more convenient if it had a port.
Jabber uses XML and I did it fine under a system daemon like Bitlbee AND an IRC client on top of that. 48MB overall on the Zipit z2, 32MB + compressed ZRAM. The total usage was about ~16MB with a tiny MUSL build, tmux, ash, bitlbee and sic.
SMTP, NNTP, Gopher... are protocols for 16 and 8 bit architectured computers. Go figure.
A Classic Mac with System 6 could do IMAP just fine, jcs wrote a client for it.
If you meant early-mid 90's, that's true.
Unlike an RPi, this thing has a screen, a keyboard, a sleek case, a battery compartment. What are other devices that have these all, and cost, say, under $40?
https://powkiddy.com/products/powkiddy-v90-3-inch-ips-screen...
It makes a fun little device that much better. Plus it's a good starting point if you want to try doing your own Linux stuff on it.
It seems like you can. Pico8 does have a raspberry pi (ARM cpu version) Through retro-arch? I’m not sure how it all goes together.
https://retrogamecorps.com/2021/02/01/review-powkiddy-v90/am...
This is an unofficial player.
The display on this thing is the biggest limitation. 320x240? Is he fucking joking?
USB dongles piss me off; specifically the Logitech Mouse USB dongles:
Why the heck hasnt a single manufacturer included the USB Dongle radio IN the mobo?
So with slim laptops you have few USB ports.
I currently am typing this on an HP Omen flagship gaming laptop... It has ONE USB-C port, which is under-powered (I have a USB-C Hub, that requires an external USB-C Power source... so I have to plug the uSB-C Hub into my machine's C port, then plug the power USB-C <--> USB-B port consuming TWO of my USB ports on my machine...
I plug in multiple USB-based monitors as well - and I can carry it all in my backpack...
But we need MORE USB ports than fewer... and Mice should not consume a port.
BT mice have never been subjectively responsive enough for me. For example, I can test-map-out my BT environment in my home by connecting to the BT speaker and moving around and it skips....
/rant
USB radio dongles are not standardized, that's what Bluetooth is for. (There used to be a Wireless USB standard but it was never widely adopted, and it has fallen out of use altogether.)
There are USB-C power bricks that also work as hubs, so you're not wasting your only USB-C port.
Anecdotally, I've experienced very few issues with the Logitech MX Master (both the original and v3) on my Mac via BT - every once in awhile (often enough to be aware of it, but infrequently enough that it's not something I'd consider a problem) the original would cut out for a few seconds, but other than that it tracked perfectly, and I haven't even had the periodic cutting-out issue with the Master 3 (yet; I've only had it for a little over a month now).
Of course, this is dependent on the BT implementation of both the mouse and PC being used, which is something to take into consideration (I've had way fewer BT connection issues in general with MacBooks than with any Windows laptops).
I wanted to like Bluetooth mice, but they just didn't work out for me. Some of the wireless mice these days are dual mode though; can run with proprietary wireless or switch to BT to avoid the proprietary dongle (some of the proprierary dongles also can act as a standard BT dongle, if your computer doesn't already have one). I know there was a line of mice that did wifi instead of BT too, because that makes sense.
That seems like a winning combination!
I have the intuition that integral wifi is table stakes for a general computing device.
Get off my lawn. With 8MB of RAM you could run Win95 AND a MP3 player.
It really doesn't take much else, you'd need a tcp stack where most of the memory usage is buffers. Maybe 15-30 kb, and you'd need to load some player into mem as well.
There are tiny embedded devices all over that have music running on them. I've seen lightbulbs and light switches that can stream music.
Idk why everyone thinks it takes 500mb to play an MP3. Maybe because the vast majority of compute power these days seems to go to all the shit the app puls in to sell ads and native programs are all just electron apps but it really doesn't have to be like that for most functions of a computer.
ZRAM did magic expanding the RAM to 24MB.
And under text mode you can do lots of things. With a framebuffer, say hello to 420p videos, PDF's and some web pages with images thanks to links -g.
You must use tmux+ash as your "interface", but it works.
I could play music. Not waveforms, but MIDI-level.
- Direct file transfer between devices, with simplicity not comparable to wifi.
- Easy connection to the internet using a mobile phone (likely even the cheapest feature phone).
- Connecting a mouse (and maybe an external keyboard).
- Connecting a 2FA security token (may be important in the SSH terminal capacity).
Its used in so many tracking methodologies for BT Unique IDs tied to real humans...
After all Linux used to run on 486, BSD ran on 386.
Yes, but it wasn't easy, and only recently achieved. [0][1][2][3] Unfortunately, for both those examples, the WiFi module itself had to be disabled so that Linux had enough memory to function.
Though, of course, they should be able to do something like my favourite tiny Linux board, which wired in extra RAM. The 8bit Atmega [4], that only takes 4 hours to boot Ubuntu.
[0] https://twitter.com/xiaohui10556190/status/14163071689916047...
[1] https://whycan.com/p_66202.html
[2] https://www.cnx-software.com/2021/07/18/linux-5-0-esp32-proc...
[3] https://www.reddit.com/r/esp32/comments/dtlj7n/booting_linux...
[4] https://linux.slashdot.org/story/12/04/02/191203/gnulinux-ru...
Granted, that's going through SimH; it would be interesting to see if retrobsd or litebsd could be ported to run on ESP32 natively.
Main issue with Linux on an MC is lack of MMU, though YMMV
https://www.96boards.org/product/orangepi-i96/
Price isn't much higher than most ESP32 modules, and it can run plain Linux.
Two biggest limitations are RAM and wireless interfaces, or rather lack thereof. This thing has less RAM than my router (admittedly a $70 box), and has neither WiFi nor BT. It does not seem to have many GPIO pins, too.
With the amount of RAM installed, it's mostly a handheld terminal, and maybe a handheld console with emulators for old games.
While this is admirable as a proof of concept, I suspect that moving the price point up to, say, $30 could give a much more useful and hacker-friendly device.
I greatly appreciate the split keyboard and the replaceable NiMH batteries, though.