But for Gaming loads where the CPU maxes out, I haven't seen reviewers hit those numbers. The 12900K was using ~125W in those workloads, just a few watts lower than AMD.
Now, if you go down to Intel's midrange (i5, not the i9 you were quoting), the power usage is way down (at 125W), vs the AMD 5600X at 75W with a blender workload. Gaming workload, Intel is a few watts higher than AMD.
Yes, Intel is drawing way more power for super CPU intensive tasks, but for what most people will be doing, it's pretty even.
Source: LTT review: https://www.youtube.com/watch?v=-EogHCFd7w0&t=513s
This. I honestly don't get why people are so focused suddenly on the power consumption for a desktop CPU designed for enthusiasts who want top performance at any cost.
GPUs are consuming way more power than that(Nvidia's Ampere is a notorious power hog), pushing consumers to 700W+ PSUs and nobody bats an eye, but seem to throw their hands in the air when their CPUs get close to that of a GPU.
Like why? It's the top spec model, it's supposed to be ludicrous, not be good value for money or highly efficient, they have other models more competitive for that. It feels like people are just looking for reasons to to create outrage about a product they're not gonna buy anyway.
Because if you up the Power/Current limits on a Ryzen, they will run faster - especially in tests like Cinebench. You won't even have to 'overclock' them. Simply allow them to draw more power if your cooling, motherboard, and PSU can handle it.
To make that a fair test the tester would have had to crank those settings up as far as they go, or until they match the Intel processor. If the Intel processor is allowed to draw 250W, the Ryzen should get the same treatment.
For example a Ryzen 5900X at ~135W (CPU Package) should score around 8200 in Cinebench r20, and at ~200W it should score around 8900.
Since in the test those 200W are apparently for the whole system, it's pretty obvious the tester left those at the stock values.
The test was perfectly fair because they used the CPU as delivered, as the average user would use it.
Nobody is buying these CPUs to overclock them to a specific power usage. They're either running them stock or running them at whatever comfortable overclock they can get away with.
Test stock versus stock and overclocked versus overclocked. Trying to normalize to specific power consumption doesn't make sense for enthusiast builds.
You surely mean "for low end" builds? Because for enthusiast builds it makes a lot of sense.
Why would you set up "enthusiast" level cooling that can handle 200W and higher, and then keep your CPU set to the default 135W?
At that point one should be buying prebuilt and hope the manufacturer properly sets up the system, because one clearly can't.
I am my friends are these 'nobody', we cant be arsed to overclock but want them to use all power avaliable
It's still overclocking.
PBO will drive a 5950X to something like 310W in some applications.
If you just change PBO limits, it never goes beyond what AMD knows their silicon can handle, and what is sold to the customer. Individual cores might already be boosting to those clock speeds over short intervals. You're just allowing more cores to do that and longer, within your configured power limits. The expectation here is thermal throttling, not an unstable system.
No one pretends PBO is not overclocking. Not even AMD:
> Precision Boost 2 is a performance-maximizing technology available in all AMD Ryzen™ and Ryzen™ Threadripper™ 2000 Series processors (or newer). This technology can improve your PC’s performance by raising clockspeeds
-
And PBO still voids your warranty and does not magically respect some limit: https://community.amd.com/t5/gaming/understanding-precision-...
> Because Precision Boost Overdrive enables operation of the processor outside of specifications and in excess of factory settings, use of the feature invalidates the AMD product warranty and may also void warranties offered by the system manufacturer or retailer.
-
Reply because I'm getting rate limited, probably over that one time I wasn't nice to dang
> Changing these values will not make your CPU reach voltages it wouldn't otherwise have reached, nor will it make your CPU reach clock speeds it wouldn't otherwise hit.
This is patently false! I don't know where you got this idea when I literally just quoted AMD saying it raises clocks past factory specifications!
Also sure where you think the additional power draw comes from...
AMD literally uses the tagline: "Precision Boost Overdrive: A Smarter Way to Overclock" -
I see no point in continuing a conversation with someone who doesn't understand the basic tenets of the technology they're trying to split hairs over.
PBO is overclocking. Simple as that.
Are you calling this explanation completely wrong?: https://www.gamersnexus.net/guides/3491-explaining-precision... This is someone who should really know what they're talking about.
> What is important to note is that PBO only affects these three power limits. The effect on CPU clock speed is indirect, and PBO will never boost the CPU past the advertised clocks.
I think it's fair to say adjusting power limits falls under a deliberately broad "overclocking" umbrella, but it's not really overclocking, and doesn't require you to do the effort part of real overclocking.
> This is patently false! I don't know where you got this idea when I literally just quoted AMD saying it raises clocks past factory specifications!
The part you quoted doesn't have the word 'clocks'.
If you don't know clocks is slang for clockspeed, you're out of your depth. So just stop talking.
> This technology can improve your PC’s performance by raising clockspeeds
And you're saying that technical documents from AMD don't know what they're talking about (it's a technical document. It's a technical article.)
But GN, the kings of stating guesses confidently with the worst understanding of statistics I've ever seen to an uninformed crowd do?
Please. I don't even care how you cope with PBO being an overclock anymore, call it a "raising clock speeds over stock" if it helps you sleep.
I phrased that badly. I was talking about the second quote there.
It's a little bit subtle.
The first quote says it will raise clock speeds.
The second quote says it will operate outside of specifications.
But nowhere does it say the clock speeds will be outside the specification.
It's raising the power limits outside the specification so that it can raise clock speeds inside the specification.
> And you're saying that technical documents from AMD don't know what they're talking about (it's a technical document. It's a technical article.)
If you can quote me something from AMD that specifically says PBO (not AutoOC) raises the maximum clock speed above the number you can boost to within spec, I will admit I was wrong and apologize. But the page you linked doesn't say that.
Allowing here means that in the typical motherboard you'll have to change PBO from the default "Auto" to "Manual" to see these settings.
Where do terms like "undervolting", "overvolting", "setting TDP" even fit in your vocabulary if you insist everything is to be called "overclocking"? These terms should be literally self-explanatory.
[1] But only technically, because for some reason the AutoOC feature is found in the PBO menu on motherboards, even though AutoOC is not part of PBO. They are however typically marketed together.
Most tech products that are the tip of the spear are bad value for money and less energy efficient than the ones down the range (Nvidia 3090 vs 3080 for example) as they pass the point of diminishing returns of what the design can do and what's cheap and easy to manufacture.
But they exist because there is a marke of enthusiasts for whom efficiency or price does not matter, they just want the best performance money can buy because maybe their business use case benefits from the 10% shorter render/compile times at the cost of 50% extra power consumption. Who are you to judge?
If that is true they should be comparing it to the Epyc 7763 or other CPUs that aren't meant to be reasonably priced. No reason a true enthusiast would pick this CPU over Epyc.
That's a server chip/line, no? And therefore will have significantly worse per-core performance, one of the most important things for non-embarrassingly-parallel compute tasks?
Edit: and after a cursory search, is it not also true that Epyc line is 4-8x higher priced than the 12900k MSRP?
That just sounds childish.
Jokes are usually meant to be funny.
>I sometimes really wonder at the social skills of people on this website.
One's social skills are not defined by comprehension of poor attempts at snarky humor on the internet.
Old doesn’t mean heat abused. Gaming laptops or ones with discrete GPUs often have issues and it’s always because of the GPU. If it posts it doesn’t mean that the GPU won’t die soon or is problem free, gaming laptops have the most heat abuse and are constantly dying and having issues. Performance degradation because it’s old is a different claim from saying heat damage doesn’t exist.
These are individuals with an interest in harming Intel and propping up AMD.
Harming the compaby that was fines billions for market manipukation against AMD?
Who do you recommend this CPU to?
Modern desktop CPUs are already being pushed well past the peak perf/watt efficiency in order to extract the maximum amount of performance. A Ryzen 9 5950X would need substantially more than 300W to hit 6 GHz, and you would need exotic sub-ambient cooling to keep it stable at those speeds.
A more reasonable comparison would be against EPYC and Threadripper, both of which use their respective power budgets for more cores rather than more clocks. A 64-core EPYC 7763 has a TDP of about 280W, and it's going to substantially outperform the Core i9-12900K when given 300W of power.
And while I think my highly optimized 5950x setup could probably eek out the 12900k cinebench multicore score I'm sure if you gave me 10 minutes to also be fair and tweak a few settings on the 12900K I could get that to win again, even without messing with max power.
I do agree the Ryzen numbers in the article do in general seem lower than normal though.
Given this is Intel's "Catch up multiple nodes, new performance design, 300 watt class, ddr5" CPU and it's only able to get this eek ahead vs AMD's CPU from last year which is about to get the same litany of improvements plus their stacked cache improvement I'm not holding my breath Intel is really innovating fast enough again but at least they don't seem to be sitting still anymore.
If the junction-to-case thermal resistance is 0.5 deg C/W and CPU dissipates 100W, then the junction will operate at 50 deg C above the case temperature, whatever that is.
If the case is kept at room temperature (say 25 deg C), which is the best possible a simple air or water cooled system can do, then the junction will operate at 75 deg C.
For simple discrete transistors and diodes, Tj_max is typically 150-175 deg C. For modern CPUs I believe it's closer to 100-125 deg C.
Thus, lowering the case temperature means the chip can consume more power before reaching the maximum junction temperature.
A greater power budget means you could raise operating voltages to help with overclocking for example. Keep in mind power dissipation scales with voltage squared.
There might be other effects too, I'm no overclocking expert, but this is one aspect.
But not my field so no idea how that interplay works out.
Think of FET as a solid state thermionic valve, it's not that far away from it, if you dig into physics.
AFAIK, the theoretical benefit of doing the big-little arrangement is improved power scaling with load. At partial load, powering a wimpy "e-core" at its ideal clock speed should be more efficient (instructions per kwh) & possibly have better latency characteristics than the usual approach of doing a drastic underclock & undervolt on big performance-oriented cores.
Naturally I'm interested in seeing whether that theoretical advantage of the architecture has paid off. The maximum speed performance stats and wattage numbers give an incomplete picture. I want to see wattage and performance metrics across the spectrum of load levels, from <1% all the way up.
If the 12900K delivers roughly 5950 level performance using 25% more power than the 5950, that looks pretty bad. But if the 12900K can deliver 25% of its max performance for only 10% of its max power envelope, and the 5950 needs 30% of its max power envelope to keep up with that load, that's a big deal, and the intel chip will actually be the cooler one more often than not. That dynamism is what reviewers need to focus on explaining & quantifying, IMO.
FWIW, my water cooled AMD Ryzen also shoots up to very high temperatures immediately when loaded. It can touch 80C like a lightswitch.
Water coolers have a lot of thermal mass in the water and the metal radiator. The CPU can't instantly heat all of this up.
What's actually happening is that the turbo boost is pushing the CPU as far as possible within the thermal limits on a short-term basis, then slowly lowering the boost frequency as the temperature saturates. Power consumption is very non-linear, so each additional MHz of boost is a significant amount of additional power. The boost algorithms are designed to spike high for short bursts at the onset of load because most desktop operations require short bursts of single-threaded performance.
It might be interesting to look into a block which covers the chiplets more. Mine does max 55 at normal speeds and PBO max/unlimited power it does about 70C max (and about 220W draw for a 5900X). I have no peaks like you describe. That used to be a bit more with my old water block which had copper on the chiplets but no water channels.
you should probably looking at a nocturna dh15, no ryzen (on the market) will get to 80° when loaded, not even in long blender sessions) so you probably have a faulty water cooling or smth.
In my experience with a 5600X and water cooling (nothing crazy, just an off the shelf AIO) sustained full CPU load will be in the 70s, but I've seen it hit 80 or so briefly.
The Ryzen temperature spikes are a well-known phenomenon: https://www.google.com/search?q=ryzen+temperature+spikes
Firmware quality for AM4 boards is ... "variable". My board restricted CPU power to 60% of nominal because they put in the wrong ADC scaling factors in some BIOS revision. Some boards have PBO enabled by default (which nets big % on the kill-a-watt, less % in performance). Many boards have bad defaults when you enable XMP which steal a few Watts from the actual CPU cores.
CB mostly scales with core frequency, memory and FCLK are less important.
> At that point some Ryzen's will be operating at close to 6GHz per core.
There's no way any of them will get close to 6 GHz without LN2.
No need for LN2, you could probably achieve this easily using a closed loop CO2 system. But I'm not aware of any such systems readily available. Kinda seems like an unfilled niche to me.
Still a very serious heat producing thing in one socket compared to the AMD.
This also means it's going to require some rather expensive motherboards since reliably delivering 280W to one socket is no simple task.
His reply: These are the showroom-only models where customer won't buy but will feel their (already expensive) not as high end plan is more reasonable.
Essentially it's a part of product marketing segmentation where you create an unobtanium segment that's only there to sell other segments.
It's not insanity. Overclocked enthusiast builds have been pushing over 250W and higher for many years. Quietly cooling a CPU putting out that much heat isn't a mystery any more. Modern coolers are very, very good.
That Intel CPU doesn't come anywhere near 250W during gaming or normal operations anyway. It's not like it's consuming 250W every single time you do something.
Modern GPUs also consume well over 300W during normal gaming, which will be double or triple the consumption of most CPUs. I don't understand this sudden concern about Intel shipping CPUs with high peak TDP.
It does though, that's the whole reason why I'm complaining. While I'm doing a video transcode on my 5900X putting all cores on full load it won't go above 140W. Do the same on the i9 and it will do it marginally faster sitting at 250W.
The point isn't complaining about 250W usage in general. Of course there are other chips, including other CPUs that use that much or more and it's not the end of the world. The problem here is that you're paying a HUGE price for a very minor advantage over the competition or even their own chips. If you clearly can buy a chip that performs very slightly worse for over 100W reduction in power, why would you buy the space heater one.
Yes overclockers have been doing this literally forever, I'm aware, but this is intel making this decision on stock CPU - I just don't find this acceptable at all.
>> I don't understand this sudden concern about Intel shipping CPUs with high peak TDP.
To summarize the above - because clearly the high peak TDP is much higher than that of competing CPUs for a very minor increase in performance. That's just not ok.
It's what humans do. We don't cross the Pacific on a tiki raft or fly to the moon in a tin bucket because our destination is nicer than where we are currently, we do it because we can and because it's awesome.
To stick with the car comparison, let's use Mercedes C class and BMW 3 series as direct competitors, right? They offer broadly the same features, cost the same amount of money, look similar-ish, you get my point.
So now imagine that one year, BMW releases a new 3 series with revolutionary new engine that makes it go faster by few percent than the C class on average, but at the cost of double fuel consumption.
I'm sure you'd go - what are you doing BMW. You aren't Lamborghini, you aren't pushing the envelope here - you are just pushing your existing framework to the absolute max to beat the competition at a huge cost.
This isn't progress, and this isn't a bugatti veyron equivalent. This is just technological dick waving with no regard to power consumption whatsoever.
The AMG and ///M models don't ever get compared on mileage, and almost noone who buys them cares in the slightest. They want to know about the performance, full stop.
I should have worded it better, as having owned quite fast cars when I was younger the running costs (both to my wallet and the environment) were something I eventually realized were more important than the performance.
Very few ever heeded me.
Computing and heating in one go.
uh, people who want more performance? 250w is not some absurd tdp that can't be cooled.
Let me make this even clearer - Intel provides two numbers this time round. One "typical" power usage, and one "peak" power usage for every 12th gen CPU. The peak on the top i9 part is 250W, and looking at the reviews that came out today, it seems correct - the CPU will consume 250W of power when running at full load.
Maybe I misunderstood you?
I do agree with the second part of your reply, and I also don't know who would buy the Intel part over the AMD part. I think Intel's move into space heaters is disappointing, and once AMD revs their process, micro-architecture and moves to DDR5, I suspect they will once again smoke Intel. Pretty poor showing in my opinion.
Why do these formulas matter though, if we know, without a doubt, that a fully loaded 5900X/5950X will just sit at 150W usage, but the new 12th Gen i9 at full load sits at 250W. That's not going by what Intel says or what's on the box, that's actual measured power usage which has been now confirmed by reviews.
So yes, sure, let's not compare the given numbers in the spec - but real life numbers do back it up this time.
Anandtech has a detailed section comparing DDR4 to DDR5: https://www.anandtech.com/show/17047/the-intel-12th-gen-core...
Higher than their benchmarks, the article is fishy. I'm 500 faster than the AMD and 200 Faster than the I9...
>We tested Alder Lake on the latest Windows 11 below, but our Ryzen results are on Windows 10—this made certain to avoid AMD being penalized by the current Windows 11 regressions in L3 cache and Preferred Core selection, while giving Alder Lake the big.little architecture support it needs from Windows 11 itself.
Thanks.
It's hard to cool 307W over extended periods without your computer becoming really loud, even with a water cooling setup.
Now, if they had that kind of cooling available, they could have easily gotten a lot more performance out of the Ryzen, while the i9 is already operating at the limits of what consumer grade cooling can sustain.
There's no way that Intel processor is beating a 5950X that is also drawing 300W. At that point some Ryzen's will be operating at close to 6GHz per core.
The most interesting takeaway is that Intel apparently has no qualms selling a processor with a stock configuration that draws 300W.
Also their Ryzen numbers are beyond suspicious. On a silent configuration (peak power draw ~209W, 175W sustained, some undervolting) my Ryzen 5900X hits a Cinebench R20 score of 8835 vs their 8390. I suspect my rig is worse since I cheaped out on the RAM, but I wouldn't know because they omit information about the Ryzen test rig.
Their Ryzen numbers don't add up with other benchmarks around the internet either: The 5950X should hit around 10400, and the 5900X should hit 8600 in their stock configurations with mid-to-high-grade RAM[1]. Their scores are 400 points and 200 points lower respectively.
To get numbers as bad as theirs, I have to mismatch my FCLK and RAM intentionally. But again, we don't know what their setup is because they didn't tell us.
We however do know that they used DDR5 RAM for the Intel processor, which the current gen Ryzen don't support. Likely some performance was gained there as well, but obviously they didn't test the Intel processor with DDR4 RAM to get an idea of how much comes down to faster RAM. It's still fair to use DDR5, since the Intel processor supports it, but it's hard to say much about the Intel processor performance (development) itself without some additional information. Without this information we don't know whether we can expect the next generation of Ryzen processors with DDR5 support to immediately leave Intel in the dust again, or whether DDR4/DDR5 doesn't really matter.
[1]: https://www.guru3d.com/articles_pages/amd_ryzen_9_5900x_and_...