News for hackers. Stuff that matters.
Re:Booting a 486 from floppy with the most up-to-date stable... by aksss on Monday July 06, 2020 @05:43PM (#23753138)
The virtue of reusing an old system is somewhat eroded by the fact that its noise and power consumption exceed that of a more powerful Pi 3 B+, which can be had for $50-60 with case and power supply (circa 2020).

I see little advantage in keeping the old hardware around anymore. I think I still have some old ISA cables downstairs in a box - high time to acknowledge to myself that I will NEVER use those again.

Re:Booting a 486 from floppy with the most up-to-date stable... by userbinator on Monday July 06, 2020 @07:37PM (#23754012)
The Pi is also notoriously Broadcom-proprietary[1], whereas an x86 PC has been a de-facto standard for decades; everything is well-known or has been reverse-engineered already, especially with a 486-era system.

It's somewhat similar to the reason people (like me) restore and drive old cars, also despite the "noise and power consumption" (and some happen to like the former ;-) --- they're relatively simple and well-understood.

Likewise, there is also a very active retrocomputing community, although a lot of it goes back much older than 486 or even PC --- the C64, ZX, and the like continue to have plenty of new software written for them.

[1] and if you ask for a datasheet or any more details about it on their "excellent community" (to quote some), you basically get told politely to f'off: https://www.raspberrypi.org/forums/viewtopic.php?t=163420

Re:Booting a 486 from floppy with the most up-to-date stable... by grishka on Monday July 06, 2020 @08:43PM (#23754430)
Hmm. This https://s-matyukevich.github.io/raspberry-pi-os/ made it seem like it's about as open as an x86 PC. The only thing I see that's proprietary is the very initial bootloader that apparently runs on the GPU. But then x86 motherboards come with proprietary BIOSes as well.
Re:Booting a 486 from floppy with the most up-to-date stable... by agapon on Tuesday July 07, 2020 @04:31AM (#23756948)
We are talking about hardware specifications.
Re:Booting a 486 from floppy with the most up-to-date stable... by aswanson on Monday July 06, 2020 @07:46PM (#23754077)
Broadcom is horrible with datasheets. If you're not apple or intel, an f off should be expected in any request for a datasheet from them.
Re:Booting a 486 from floppy with the most up-to-date stable... by ifmpx on Monday July 06, 2020 @08:46PM (#23754444)
At work, we briefly considered deploying a fleet of raspberry pis as cheep ARM servers. We ordered an initial batch for evaluation, but then quickly realized just how little technical information Broadcom and the Raspberry Pi Foundation are willing to make available to their users. They were tight-lipped even with the bare minimums. We ended up abandoning the idea soon after.

Unless these companies manage to break away from their bad habits, I can't see ARM servers gaining any sort of market share outside of big companies.

Re:Booting a 486 from floppy with the most up-to-date stable... by aksss on Monday July 06, 2020 @08:55PM (#23754494)
Are you able to expand a bit on what info you were looking for? I had been considering using the Compute Module for a more "commercial" application of the Pi, and we use them periodically almost like an IoT event hub at work, so kind of curious what your roadblocks were for adoption. I probably won't have any solutions, just curious what you were dealing with.
Re:Booting a 486 from floppy with the most up-to-date stable... by moonchild on Tuesday July 07, 2020 @01:12AM (#23755902)
I've heard good things about the sopine clusterboard[1] + modules[2].

1. https://www.pine64.org/clusterboard/

2. https://www.pine64.org/sopine/

Re:Booting a 486 from floppy with the most up-to-date stable... by stallmanite on Monday July 06, 2020 @09:53PM (#23754825)
The analogy between retrocomputing and classic car enthusiasts really captures the spirit of what’s going on well.
Re:Booting a 486 from floppy with the most up-to-date stable... by reaperducer on Monday July 06, 2020 @05:57PM (#23753261)
I guess it depends on if noise and power are your primary considerations.

For some, they'd rather not see a useful machine take up space in a landfill, leech toxins into the environment, and simultaneously drive unneeded demand for the production of yet another computer.

I guess one would have to do the math and figure out what the environmental impact of a new Pi 3 B+ is.

Or they could figure out if the increased electrical cost of running an old machine over x number of years is greater than the expense of purchasing and powering a new Pi 3 B+. Where I live, I could run a 486 for a heck of a long time on $60, especially when you factor in that the Pi still needs to be powered, too.

Re:Booting a 486 from floppy with the most up-to-date stable... by aksss on Monday July 06, 2020 @06:17PM (#23753425)
I fully empathize with this - I hate throwing out/recycling electronics. The power side it truly does depend on your local rates of course. If you consider a 24/7 draw of about 35 watts to power an out-of-box 486 DX2 (headless) vs like 3 watts for an RPI, you can do the math with some variance and figure out just how long the $60 will last you. But a 10-fold reduction in power consumption is pretty remarkable. When you consider that an RPI might replace multiple 486's, even more so.

Alternative uses for a 486 case - make a planter box, bird house or a bee hive. https://www.instructables.com/id/Computer-case-beehive/

Alternative uses for 486 mobo - incorporate it into furniture design, cut it up to create a wind chime, create stuff like that to avoid the landfill. :)

Re:Booting a 486 from floppy with the most up-to-date stable... by cellularmitosis on Monday July 06, 2020 @07:17PM (#23753868)
There's also the environmental impact of the energy use. That 486 is pumping out 10x the greenhouse gasses.
Re:Booting a 486 from floppy with the most up-to-date stable... by SomeoneFromCA on Tuesday July 07, 2020 @11:03AM (#23759965)
Not really. 10x per MIPS, otherwise 486 CPU consumes about same number of watts. The whole PC though...
Re:Booting a 486 from floppy with the most up-to-date stable... by cellularmitosis on Wednesday July 08, 2020 @04:03PM (#23773677)
I'm not sure how much use a 486 is without the rest of the PC?
Re:Booting a 486 from floppy with the most up-to-date stable... by treeman79 on Monday July 06, 2020 @06:43PM (#23753635)
Dad told me he got a new computer. I asked how long he had the old one.

Apparently it was my old team fortress computer. So like 15 years.

Re:Booting a 486 from floppy with the most up-to-date stable... by epmaybe on Monday July 06, 2020 @08:36PM (#23754385)
My parents are still using the first computer I ever built, which is easily 10 years old! Power consumption on that machine is excessive, and I've been meaning to replace it, but the cost per year in excess electricity hasn't made it worth it to upgrade the machine.
Re:Booting a 486 from floppy with the most up-to-date stable... by aksss on Monday July 06, 2020 @08:57PM (#23754507)
How about a reduction in your personal help desk call queue? Or support incidents/month metric? I only partially kid - I switched the folks over to iPads and _everyone_ is happier.
Re:Booting a 486 from floppy with the most up-to-date stable... by treeman79 on Monday July 06, 2020 @10:14PM (#23754958)
I switched my mom to an iPad.

Fixing the computer keeps my dad busy. Seriously he has nothing better to do.

Re:Booting a 486 from floppy with the most up-to-date stable... by anticensor on Tuesday July 07, 2020 @01:37AM (#23756046)
Alternative use for a 486 case - reused as a computer case for a cluster of fresh single-board computers.
Re:Booting a 486 from floppy with the most up-to-date stable... by bargle0 on Monday July 06, 2020 @08:22PM (#23754311)
486 is pre-RoHS, so there’s probably lead in the solder. I wouldn’t want it hanging around kids.
Re:Booting a 486 from floppy with the most up-to-date stable... by naikrovek on Monday July 06, 2020 @10:01PM (#23754883)
Leaded solder doesn't spontaneously vaporize and become airborne. You have to touch the solder enough to rub some off onto your skin, then put that part of your skin into your mouth long enough to get the absolutely microscopic amount of lead into your body.

Solder went lead-free (and electronics in general went ROHS) so when it's buried in landfills it doesn't seep lead or other hazardous materials into groundwater.

There is zero chance of lead solder getting hot enough to skip the liquid phase of matter and go straight to a gas in a 486.

Re:Booting a 486 from floppy with the most up-to-date stable... by throwaway43234 on Monday July 06, 2020 @07:40PM (#23754026)
For some resources such as copper, it might actually be environmentally net positive to recycle to old copper and buy new.
Re:Booting a 486 from floppy with the most up-to-date stable... by Scoundreller on Monday July 06, 2020 @07:52PM (#23754122)
And about $5 in gold in a 486 chip:

https://www.ozcopper.com/computer-cpu-gold-yields/

Re:Booting a 486 from floppy with the most up-to-date stable... by kjs3 on Monday July 06, 2020 @09:01PM (#23754531)
Citation needed. I know a ton of folks who bought those things by the cubic yard for the metals, and only managed to make an environmental mess with little dollar return.
Re:Booting a 486 from floppy with the most up-to-date stable... by throwaway43234 on Wednesday July 08, 2020 @12:27PM (#23771432)
There's much less volume of copper in a RPi than a 486, so if you recycle your 386 to get a Rpi, the net copper reserve increases.
Re:Booting a 486 from floppy with the most up-to-date stable... by 6510 on Monday July 06, 2020 @06:18PM (#23753435)
You should develop the creativity to do something completely useless with everything.

https://inhabitat.com/wp-content/blogs.dir/1/files/2018/12/c...

Re:Booting a 486 from floppy with the most up-to-date stable... by sosuke on Monday July 06, 2020 @06:24PM (#23753486)
If you enjoy circuit board art I saw this artist year after year in the Armadillo Christmas Bazaar. https://www.armadillobazaar.com/austin-circuit-board-2015-2/
Re:Booting a 486 from floppy with the most up-to-date stable... by nessunodoro on Monday July 06, 2020 @07:33PM (#23753980)
Artist John Zaklikowski had a great exhibit called Hard Drive Universe in 2012 in SF

https://www.flickr.com/photos/schill/albums/7215762935517133...

Re:Booting a 486 from floppy with the most up-to-date stable... by cosmotic on Monday July 06, 2020 @05:58PM (#23753276)
AFAIK You can't hook up old ISA or PCI cards to a raspberry pi, and if you can, the x86 drivers and software won't work.
Re:Booting a 486 from floppy with the most up-to-date stable... by aksss on Monday July 06, 2020 @07:05PM (#23753782)
For the record... sure you can!! :D

An ISA/IDE cable is just copper ribbon cable using .1" spacing, which is what the GPIO header pin spacing is on a Pi. There is a pin blocked on the standard ide female connector but that pin is just one of many ground connectors on the Pi. Clip it off or dremel/drill out the hole as needed. Jeez, now I just convinced myself that I MIGHT use the cable some day. Thanks a lot! >:/ Was trying to throw it away.

There's a PCI bridge for the raspberry pi 4, if for whatever reason one would want to do such a thing. Drivers might be a problem if the card's linux support sucks but that's kind of a separate issue. https://www.tomshardware.com/news/raspberry-pi-4-pci-express...

EDIT: Oh, maybe your point was that the reason to keep the 486 around is to use old ISA/PCI cards - sorry, I mentioned ISA cables in OC so thought you were replying to that. Yeah, point taken, but I'm skeptical that there are any but the most narrow cases where the function of an old ISA/PCI card can't be replicated/emulated with better performance on a Pi. I mean, trying to think of the edge cases - an old SCSI RAID controller? Maybe some proprietary industrial controller stuff? but yeah. My comment about junking the old stuff was just a criticism of the inclination I think all of us nerds have to get that old box back into production use at home. I think there are very few - if any - cases where that makes sense anymore.

Re:Booting a 486 from floppy with the most up-to-date stable... by kjs3 on Monday July 06, 2020 @09:08PM (#23754570)
What is this "ISA cable" thing you keep talking about? You mean an IDE cable? ISA is a bus, not a cable.

I have all sorts of ISA cards that have no alternative (other than for huge expense) or software. Quite a few IEEE-488, many other weird interfaces, DSP dev boards, one of a kind/prototype boards, other stuff. I have boxes of the stuff, and know hundreds of people who have the same needs. We have mailing lists.

No, a PI can't do that. No it can't emulate that. No it's not as generally useful as you think unless all you care about is stuff written in the last 5 years.

Re:Booting a 486 from floppy with the most up-to-date stable... by aksss on Monday July 06, 2020 @10:42PM (#23755173)
Yeah I said IDE in the comment you're replying to. IDE or ATA is a subset of the Industry Standard Architecture (ISA), but yeah you're right - I should have said IDE cable in OC. Forgive me, it's been a while.

I don't doubt there are specialized boards out there that have no modern functional equivalent (esp. industrial apps), but you CAN connect to stuff using GPIB (IEEE 488) with a Pi, so that's not one of them.

If legacy OS/app support is your issue I'm not sure it's going to give you much value booting your 486 with a linux distro today (what the post was about, and the context in which my comment was made about the Pi).

If you're locked into the 486-generation hardware interfaces and the Windows/DOS software platform, and CAN'T leverage hardware interface bridges and software emulators on modern systems with horsepower to spare, you're talking about the edge cases of the edge cases.

My point was never directed at the edge cases of the edge cases. I said "I see little advantage in keeping the old hardware around". The rare edge cases are represented by that "little advantage" I CAN see. But it's little, man. Most situations where a 486 would offer any utility today, particularly on Linux but not only that, a $50 3-watt Pi can do the job better, cheaper and cleaner.

Those things are the embodiment of "generally useful" - A low power, small form-factor, relatively high-power compute platform with an easy to use GPIO header and libraries for many languages, able to leverage most Debian packages (including DOS emulators). I admit it doesn't meet 100% of planetary need, but it's right up there with anti-lock brakes, microwavable meals, and stretchy pants in my book. Convince me otherwise.

Re:Booting a 486 from floppy with the most up-to-date stable... by cellularmitosis on Monday July 06, 2020 @07:21PM (#23753893)
I find the most useful application of old hardware is to occasionally re-ground your perspective on code performance and resource utilization. Writing software for old hardware is an effective way to force yourself to write performant code, even if only as a rare weekend exercise :)
Re:Booting a 486 from floppy with the most up-to-date stable... by russdill on Monday July 06, 2020 @07:26PM (#23753929)
You can get all that from using an AT-tiny :)
Re:Booting a 486 from floppy with the most up-to-date stable... by fsociety on Monday July 06, 2020 @06:10PM (#23753370)
It’s more like art than an engineering accomplishment
Re:Booting a 486 from floppy with the most up-to-date stable... by happycube on Tuesday July 07, 2020 @02:11AM (#23756225)
Another good cheap option if the Pi doesn't suit you is an up-cycled thin client - some HP T620 configs (quad AMD Jaguar, 4GB RAM, 16GB flash) are <=$55 on eBay US w/PSU.

(There's also the T620 Pro, but those are going for a bit more these days since they make good home routers when you add a quad gig-e card...)

Re:Booting a 486 from floppy with the most up-to-date stable... by coolreader18 on Tuesday July 07, 2020 @02:36AM (#23756355)
You can also always just find an old desktop box and install a lightweight distro on it -- my grandpa got a new computer a year or so ago so I took his ~10 year old HP box, wiped it, and installed alpine. Now I have it just plugged into my router and I have a few cron jobs and docker services that I run on it.
Re:Booting a 486 from floppy with the most up-to-date stable... by happycube on Tuesday July 07, 2020 @09:32AM (#23759032)
That too. Then again I'm old enough that seven year old computers should be ancient, but with a good video card and enough RAM/SSD they still do almost any job.
Re:Booting a 486 from floppy with the most up-to-date stable... by AnIdiotOnTheNet on Tuesday July 07, 2020 @09:41AM (#23759133)
I happened to have received a small pile of that exact piece of kit a while back. It is easily capable of running a full desktop OS and playing older games. Absolutely ridiculous specs for a thin client.
Re:Booting a 486 from floppy with the most up-to-date stable... by SillaDeRuedas on Monday July 06, 2020 @05:46PM (#23753174)
But then you wouldn't show up in HN's frontpage doing something completely meaningless.
Re:Booting a 486 from floppy with the most up-to-date stable... by rpeden on Monday July 06, 2020 @05:53PM (#23753226)
Sometimes fun is the only meaning you need!

I think this is definitely in keeping with the hacker spirit and belongs on the front page for that reason alone.

Re:Booting a 486 from floppy with the most up-to-date stable... by aksss on Monday July 06, 2020 @06:05PM (#23753329)
For the record, I fully support this attitude to life. Doing it for its own sake is totally a virtuous pursuit.