Re:Booting a 486 from floppy with the most up-to-date stable...
by aksss on Monday July 06, 2020 @06:17PM
(#23753425)
I fully empathize with this - I hate throwing out/recycling electronics. The power side it truly does depend on your local rates of course. If you consider a 24/7 draw of about 35 watts to power an out-of-box 486 DX2 (headless) vs like 3 watts for an RPI, you can do the math with some variance and figure out just how long the $60 will last you. But a 10-fold reduction in power consumption is pretty remarkable. When you consider that an RPI might replace multiple 486's, even more so.
Alternative uses for a 486 case - make a planter box, bird house or a bee hive. https://www.instructables.com/id/Computer-case-beehive/
Alternative uses for 486 mobo - incorporate it into furniture design, cut it up to create a wind chime, create stuff like that to avoid the landfill. :)
Re:Booting a 486 from floppy with the most up-to-date stable...
by cellularmitosis on Monday July 06, 2020 @07:17PM
(#23753868)
There's also the environmental impact of the energy use. That 486 is pumping out 10x the greenhouse gasses.
Re:Booting a 486 from floppy with the most up-to-date stable...
by SomeoneFromCA on Tuesday July 07, 2020 @11:03AM
(#23759965)
Not really. 10x per MIPS, otherwise 486 CPU consumes about same number of watts. The whole PC though...
Re:Booting a 486 from floppy with the most up-to-date stable...
by cellularmitosis on Wednesday July 08, 2020 @04:03PM
(#23773677)
I'm not sure how much use a 486 is without the rest of the PC?
Re:Booting a 486 from floppy with the most up-to-date stable...
by treeman79 on Monday July 06, 2020 @06:43PM
(#23753635)
Dad told me he got a new computer. I asked how long he had the old one.
Apparently it was my old team fortress computer. So like 15 years.
Re:Booting a 486 from floppy with the most up-to-date stable...
by epmaybe on Monday July 06, 2020 @08:36PM
(#23754385)
My parents are still using the first computer I ever built, which is easily 10 years old! Power consumption on that machine is excessive, and I've been meaning to replace it, but the cost per year in excess electricity hasn't made it worth it to upgrade the machine.
Re:Booting a 486 from floppy with the most up-to-date stable...
by aksss on Monday July 06, 2020 @08:57PM
(#23754507)
How about a reduction in your personal help desk call queue? Or support incidents/month metric? I only partially kid - I switched the folks over to iPads and _everyone_ is happier.
Re:Booting a 486 from floppy with the most up-to-date stable...
by treeman79 on Monday July 06, 2020 @10:14PM
(#23754958)
I switched my mom to an iPad.
Fixing the computer keeps my dad busy. Seriously he has nothing better to do.
Re:Booting a 486 from floppy with the most up-to-date stable...
by anticensor on Tuesday July 07, 2020 @01:37AM
(#23756046)
Alternative use for a 486 case - reused as a computer case for a cluster of fresh single-board computers.
Re:Booting a 486 from floppy with the most up-to-date stable...
by bargle0 on Monday July 06, 2020 @08:22PM
(#23754311)
486 is pre-RoHS, so there’s probably lead in the solder. I wouldn’t want it hanging around kids.
Re:Booting a 486 from floppy with the most up-to-date stable...
by naikrovek on Monday July 06, 2020 @10:01PM
(#23754883)
Leaded solder doesn't spontaneously vaporize and become airborne. You have to touch the solder enough to rub some off onto your skin, then put that part of your skin into your mouth long enough to get the absolutely microscopic amount of lead into your body.
Solder went lead-free (and electronics in general went ROHS) so when it's buried in landfills it doesn't seep lead or other hazardous materials into groundwater.
There is zero chance of lead solder getting hot enough to skip the liquid phase of matter and go straight to a gas in a 486.
Re:Booting a 486 from floppy with the most up-to-date stable...
by throwaway43234 on Monday July 06, 2020 @07:40PM
(#23754026)
For some resources such as copper, it might actually be environmentally net positive to recycle to old copper and buy new.
Re:Booting a 486 from floppy with the most up-to-date stable...
by Scoundreller on Monday July 06, 2020 @07:52PM
(#23754122)
And about $5 in gold in a 486 chip:
Re:Booting a 486 from floppy with the most up-to-date stable...
by kjs3 on Monday July 06, 2020 @09:01PM
(#23754531)
Citation needed. I know a ton of folks who bought those things by the cubic yard for the metals, and only managed to make an environmental mess with little dollar return.
Re:Booting a 486 from floppy with the most up-to-date stable...
by throwaway43234 on Wednesday July 08, 2020 @12:27PM
(#23771432)
There's much less volume of copper in a RPi than a 486, so if you recycle your 386 to get a Rpi, the net copper reserve increases.
For some, they'd rather not see a useful machine take up space in a landfill, leech toxins into the environment, and simultaneously drive unneeded demand for the production of yet another computer.
I guess one would have to do the math and figure out what the environmental impact of a new Pi 3 B+ is.
Or they could figure out if the increased electrical cost of running an old machine over x number of years is greater than the expense of purchasing and powering a new Pi 3 B+. Where I live, I could run a 486 for a heck of a long time on $60, especially when you factor in that the Pi still needs to be powered, too.