On seed stock it get's even worse, if you are next to a GM farm and get cross pollinated then your stock is tainted and you have to reseed again with clean seeds that will just get tainted in the next spawn.
We did not have this problem with citrus because it is not grown from a seed, all citrus is root-stocked and then hybrid to make sweet citrus. I know it is an issue for corn and grain farmers who do not want to grow GMO crops.
I see a simple solution here when some farmer gets stung by this: some company needs to make some really cheap GM seeds which exist only for the purpose of "accidentally" tainting the GM field next door, so that the owner of that field can get a dose of their own medicine.
> On seed stock it get's even worse, if you are next to a GM
> farm and get cross pollinated then your stock is tainted and
> you have to reseed again with clean seeds that
> will just get tainted in the next spawn.
Genuine question:
If your neighbor's seeds spread into your farm why do you have to reseed? Are you trying to avoid the cross pollination or are you required to do this by something/someone else?https://www.washingtonpost.com/archive/politics/2001/03/30/f...
It's also quite a time-consuming process to reuse seeds, which makes the whole process less cost effective anyway. GM crops have not had a significant effect on this issue.
Can you provide supporting evidence/materials to back this claim?
Every summer in the midwest you get armies of workers who do something called 'detasseling' where you walk through the seed fields and rip off the male genetalia of one of the two breeds, which forces the seeds to be pollinated in a specific way. The result is the seeds that are used to plant next years crop.
source: I grew up on a corn farm.
https://www.theguardian.com/environment/2013/feb/12/monsanto...
Regarding the camels, can you dig up a link, am curious. Thanks.
https://youtu.be/ublh9JkbeuM?t=2350
I linked to the start of the section where he begins discussing the migration of the Turks into Iran (39:10). Discussion about hybrid camels is from around 45:26 onwards.
Amazon link to his book: Cotton, Climate, Camels.
https://www.amazon.com/Cotton-Climate-Camels-Early-Islamic-d...
Here is the entire playlist of his 46 lectures on World History, of which the first link is lecture 13. His lectures are not just him retelling the material in the textbook, but rather gives criticism about how the textbook was constructed (He is the lead editor), and stories from his own research:
https://www.youtube.com/playlist?list=PLXxM47ZxXvkaODXkQBO5R...
Some side issues are that the parents are only suitable for breeding (they don't have strong genotypes themselves) and that if you take this offspring and mix them again you get a genetic shuffle which reintroduces unpredictability. This second generation will also perform very poorly, or at least unpredictably.
For seed companies you can tell that this is attractive in 2 ways: they can produce quality seed relatively easily, and the farmer always needs to buy the seed that they use for production because the farmer does not have the parent plants and the second generation is unusable.
Not all hybrids are infertile. Maize corn was developed from its wild progenitors through centuries of genetic modification through selective hybridization -- it is not a plant found in nature -- and that required viable offspring. The same goes for other major crops developed by scientists in the past few centuries, like potatoes, tomatoes, and peppers (interesting pattern there, they all originated in the same part of the world).
It's incorrect to conflate hybridization with modern direct gene manipulation (GMO). They both have the same goal, and effectively do the same thing, but are completely different approaches. Hybridization requires the cross-breeding of unrelated varieties or species, and involves both genetic and epigenetic selection. GMO is directly splicing genes of a single organism to produce altered offspring. Don;t confuse the two.
It lets you create a sort of super crop... but it only works for a single generation. ‾\_(ツ)_/‾
Why is this optimal? Well, I guess it isn't always. I'm willing to bet there are more failed hybrids than successful ones, but sometimes when you combine traits from different species, you get something that's bigger or tastier than the originals.
I have no idea about other crops; I was under the impression that grain and many other common crops could be replanted, but maybe it can't.
The F1 hybrid is a uniformly heterozygous cross. They will be a consistent and uniform mix of desired genetic factors, much like clones, but all siblings of parents that are themselves like clones.
The F2 generation will be less consistent. The genes will recombine such that the desired high-producing mix of genes will not be present in all offspring. By the F3 generation, it will almost be back to the diversity of a genetically unmanaged population. Harvest times will spread out, such that by the time the slowest plants mature, the fastest ones may already be spoiling or eaten by birds.
F2 seed can be sold and planted the next season, at a lower price, but the yield will be lower than with F1 seed. F3 seed is not economically viable to sell for planting, as the farmers that habitually save seed probably already have F3 or greater from their last crop, or an heirloom cultivar.
... first generation crosses between different parent strains. If you sow the seed from F1 hybrids (F2) they don't have a consistent phenotype
https://en.wikipedia.org/wiki/Genetic_use_restriction_techno...
Also, thankfully:
> As of 2006, GURT seeds have not been commercialized anywhere in the world due to opposition from farmers, consumers, indigenous peoples, NGOs, and some governments.
It's a common narrative that Monsanto did release crops into the wild that caused nearby farms to produce sterile crops after incidental cross-pollination. It seems like this is misinformation?
I think it's been a long time since farmers cultivated their own seed though, even before roundup-resistant and GM crops were commonplace. It's a very different science and skill to growing crops.
For these crops, it's not a very different skill. You just have to clean the seed and ideally test germination rates, though many farmers do not even do that.
Side note. There also air bearings which are also pretty awesome but require tight machining tolerances. They are used in the semiconductor industry for some things. Mainly because you dont want lubricant to dirty the enviroment, but the tighter tolerances also help ensure a spindle/shaft dont wobble as much.
Edit some time later: And then perhaps I'll go down an hours-long rabbit hole watching all his videos and learning a ton about machining...
Are there people without accents that explain things? Because that would be a video I want to see.
Of course, these days, a lot of the accents are disappearing because of mass communications, so the "American accent" is homogenizing, but those other accents aren't completely gone yet.
For example, if you have two speakers with English as a first language and a third from Germany with English as a second language, the native English speakers will probably detect a German accent in the ESL-speaker's dialect.
People get into long internet arguments over this, but the closest thing to a neutral English dialect is General American English, also sometimes called Broadcast English because newscasters, TV personalities, and actors would be trained this dialect so as to not sound like they are "from" anywhere in particular. It used to be common as well for highly-educated or upper-class individuals to hire speech coaches to teach them this dialect in order to "lose their accent". It still may be common for all I know, but I believe the deliberate acquisition of General American is probably on the decline.
>If you don't replace the oil regularly, or let it get so hot it flows out of the journal, the bearing will wear and need replacing.
It's still going to wear out from cold starts and the entire rest of the engine that doesn't have pressurized lubrication is also going to wear out eventually so there's no point in trying to outlast all those components since you're gonna have to take it apart to deal with them when they reach EOL and you can just deal with bearings at the same time.
As much as I love lugging around rotary tables and indexing heads a machine shop that makes triple digit part quantities would be stupid to run old machines (too many man hours per part) and a repair machine shop would be stupid to finance a new 5-axis.
Equipment in most industries moves from low margin, high duty cycle operators to operators with either higher margins and/or lower duty cycles.
The most frustrating part of tech is how disposable it is by design. It's degenerate and seemingly inescapable.
Plus you are not destroying your old car, they are sold onwards and used for decades by someone anyways. You are probably enabling someone to replace a rusbucket two or three steps down the line, possibly in a condition so bad, it does not pass road worthiness tests.
But now those cars mostly don't exist because we smashed them all up and weren't allowed to part them out either. Instead of spending $20 for $150 worth of parts, now I gotta buy all new Chinese manufacturer replacements for 10X as much.
...isn't that straight worse than rent-to-own...?
But the remaining market is probably big enough.
I think John Deere tractors were especially restrictive for any form of unauthorized rapairs. Restricting access for selected partners is a very customer hostile behavior. It is like printer ink all over again.
Still there are high technically hurdles that can indeed be compared with the smartphone market that still supplies crappy software on otherwise decent phones.
Digital goods (such as music, games, etc) do not count as independent things since they are implemented as software. Also previously things like music you had to perform or distribute physically.
Those all have a non-trivial cost of reproduction.
Now that music is just files, the marginal cost of sending a file down the network wire is proportional to its compressed file size, which is insignificant in relation to the cost of the human labor of creating a master recording.
Also, now that music is encoded digitally, all copies are (usually) perfect reproductions of the original.
Centuries, nay millennia, ago there were starving artists who created great works, only to have the economics of zero marginal cost of production take the food from their mouths. The appearance of and democratization of high-bandwidth telecommunication (enabled by computers, but not a property of computers) did not create that situation, it's only multiplied the zero marginal cost by a large constant. An if you've been paying attention, zero multiplied by anything is still zero.
Before computers, it was nearly impossible to copy a musical song from one person to another faster than the time it took to perform it. And to go that fast, you needed someone trained to perform it well enough (cheap, but not free) and someone trained to memorize it by ear in one take (expensive). To do it more slowly, with more repetitions, you still needed someone that could perform what they had learned, which was cheap, but not free.
The cost of connecting the teacher with the learner was likewise not free. They had to be in the same place, physically. They might meet up, learn each other's repertoire, then split up again, so as to not compete with each other by working the same territory. The invention of written musical notation was a huge leap forward, in that it enabled the profession of composer/lyricist to be separated from that of the musical performer.
Millennia ago, great works were lost completely, because they were not copied enough to survive the deaths of everyone who knew how to reproduce them. That is not a thing that happens when copies are cheap. Even things that were written down have been lost, because copying written materials was not cheap enough until the printing press.
If making a copy takes a specialist four hours, and consumes paper and ink, that is nowhere near "close enough to zero".
Now, you can copy music in a millisecond, using a device that nearly everyone carries in their pocket, to anyone in the world who likewise carries a similar device. The cost is still not zero. It is just now too small to think about, unless you are making millions of copies per second.
One is the VC/investor trap, where the primary unrealized motivation is actually just finding VCs that will fund some scheme to be the "next {insert hopes and dreams of boundless riches}", where far more often than not the winners are the cunning founders (Adam Neumann anyone?) and the VCs, with everyone else left holding the bag (Hello, WeWork starry eyed people that believed the predictions of alien visitation) if the effort can't be pawned off on someone else, or some "exit" to a corp in a kind of reverse defensive blackmail auction to snuff out or keep a competitive advantage from a competitor.
The other thing goin on here is that very predatory and pernicious and rent seeking nature you are directly referring to that seeks to constantly corral and rope in as many consumers as possible as the whole tech industry is rapacious in its lust to generate "ongoing revenue streams" through dependency or even (what used to be illegal) what amounts to predatory pricing and snuffing out alternatives by reaping havoc on the target industry and society. None of these tech companies should have been allowed to use this predatory pricing model to utterly decimate our economy as they have … Amazon, Uber, WeWork, etc. are just a few examples. At the very least it should not be allowed for public money (pensions, etc.) to be invested in companies that are unprofitable at certain ratios, e.g., over 1/4 of their existence.
One clear example comes to mind in Uber/Lyft and their wake of both immoral and illegal actions that have led to the utter collapse of the taxi industry through unfair competition, predatory pricing, and illegality. What we are now left with is a for-hire transportation sector that is now a far less competitive environment (Uber/Lyft compared to roughly 5-20+ taxi companies per city (Ignore the flaws of the industry that are irrelevant to the anti-competitive issue), but we are now also facing a collapse of competition on a far larger scale, essentially Uber/Lyft instead of literally tens of thousands of taxi companies just alone in the USA.
So what happens when the Taxis cannot keep up under the Uber/Lyft onslaught? Well, we know what happens, they use regulatory capture to limit and prevent competition and they start raising rates as they have and are doing.
The steady progression of new people - some created every day, new homeowners and what have you was enough to give a vibrant business, and ongoing sales.
What changed was the deal.
Pre 1980s most companies tried to balance the needs of all - staff, customers, local area, and shareholders. Post 1980s only the shareholders count, all else is secondary. Products and offerings are made and subscribed accordingly. The few folk still making stuff to last seem to have an anachronistic worldview to go with it. Perhaps still care about craftsmanship, repairability, and reputation, rather than built in obsolescence, subscriptions and DRM'd parts. Now they can sell you the thing 15 times, perhaps 12 of those without good cause apart from greed.
I think you have a very strong set of rose-tinted glasses. Planned obsolescence was a strategy long before 1980.
I could compare and contrast in just about every sector I can think of. Sure there were some abuses, notably some of the car makers come to mind. The needs of the customers -- beyond making the initial sale -- were far higher up the priority list than today.
Not too different with Hoover vacuums in the era of the Hoover Senior and Junior -- they stuck around, being repaired and reconditioned easily for decades. Had Hoover or Dyson not gone with cheap throwaway plastic for everything when cyclones meant capability improved in post 1980/1990 models we might have those lasting 30+ years easily too. As is they self destruct in a decade or less as more and more bits break. The (cheap plastic) spares that are available are priced such that you're heavily incentivised to replace. One or two commercial brands still make products that might last a while...
Most of the current kitchen appliance brands are mainly now just worthless logos, usually owned en masse in a larger group, probably after a leveraged hostile buyout. Now made in the same single factory and generate churn with new models every year - for the sake of difference not because there is any improvement, just deliberately changed from the previous. Spare parts might be just filter, lamp or element, often deliberately unique to model, and will be available at vastly inflated price for limited time only.
No end of other examples from hand tools, garage equipment, and home goods through to the most complex products.
Not exactly "farm tractors that last forever".
I can't help but think they regret making these things that durable.
If you sell software, do you let the old stuff atrophy and become insecure? If not, you are spending salaries on maintenance without any associated revenue. As time goes on, the maintenance costs increase without bringing in another cent.
The shining example for actually doing it right is Jetbrains. There is a schedule for new releases they keep to. You get loyalty discounts for long term subscriptions and ending a subscription entitles you to a version that is ~1 year old in perpetuity.
Plus the prices are (IMHO) entirely reasonable.
Almost no one else does this. Other companies will, say, take the MSRP of the software package, divide it by 12 and give you that as the monthly price with a minimum contract period of 12 months. They'll also restrict you to choose platform when you purchase and may limit the number of installs rather than concurrent users.
No direct affiliation, but I've shared drinks with the devs and am a very pleased user.
This might be bad for a tractor manufacturer; but an everlasting tractor would be great for society, right?
The incentive now is to innovate in order to create a better more efficient product. E.g.; a more fuel efficient tractor which increases productivity - then you'll get another sale.
Deliberately hobbling your product so that it needs repair or replacement disincentives innovation and is a form of rent-seeking https://www.investopedia.com/terms/r/rentseeking.asp and as such should be treated as a market failure. (I.e., legislated against)
As you say computers in vehicle are nothing more than holding consumers captive for a guaranteed revenue stream for the lifetime of a product. The first incident that got me thinking about this is Tivoization. The problem is getting much worse and regular consumers are unaware it is happening.
As I said "right to repair" is a good right to fight for. We need a "right to own". I recognise and acknowledge there is significant overlap.
This is why I would never buy a Tesla.
I'm going to not try and not infer anything from your handle, but how exactly do you know this?
I personally worked on and with hose 50-25 year old tractors (Renault, Ferrari, Fiat, Massey-Fergueson, Case, Ford) in my apprenticeship in Europe and I can tell you that finding parts for a lot of those were half the problem. So unless you had an in with the few shops that kept them running like they do in Cuba with GM and the like, you were SOL.
Anecdote: In England we had to drop a transmission in the middle of harvest on a 30/40 year old Case and all the spares available after several hours of calls and online searches would have to come in from former yugoslavia nations (Macedonia and Montenegro from what I recall) that had trans from tractors that 'ran when last parked' (before the break up in the 90s?) and couldn't come in by rail/air shipment in 2014 as it was the rainiest year in recorded History and brought everything to halt.
So we gathered the village and did the harvest by hand, our yield wasn't great but it wasn't a total loss as it could have been had we waited for that trans to come in.
But the following season they rented and hired a crew with a massive New Holland and John Deere fleet to help them out instead of buying.
What I guess I'm alluding to is that in the case with farming, especially at the small farm (sub 50 hectare) owning anything but a small tractor for daily tasks is unnecessary, as the cost and maintenance is way out of reach for most people's budget or even needs.
Flash-forward to 2013 in Colorado where the first legal hemp harvest took place, and you'd see a large number of farmers with more requests than they can handle to rent out their combines (with crazy combinations) and haulers out in the fields.
There will always be a 'steady stream' of purchases for tractors/combines etc... its just that they got used to the crony-capitalist profits from rebuilding Iraq, Afghanistan after the invasion etc... and forgot their projected profits should be calculated withing the confines of the production of mainly domestic demand.
As a former farmer, Biodynamic no less, I want Ag to go as automated as it can, but I can't shed a single tear for those manufactures who refuse to see why having proprietary blocks on their products will drive farmers away.
Hopefully this spurs on a lot of the talent in FAANG to do something actually productive and necessary in Society and help an opensource hardware movement in Ag.
This is a massive over-generalization.
Those tractors are not being used to farm low margin commodities (which are the people most new tractors are sold to). You can't operate a soy/corn/whatever farm without equipment that has a $/results number similar to everyone else in your market (who are also trying to reduce costs). There's a reason you don't see a lot of combines from the 70s still in operation whereas skidders basically never get replaced until they're broken in half.
I know it's handwavy but basically every aspect of running a farm converts to money at the end of the day and depending the specifics of what you farm and where you farm it determine whether you have to keep up with the joneses or can run older equipment.
Obviously the manufacturers would like to sell those farmers tractors more often than that or, in the very least, generate a revenue stream from existing hardware and honestly that's what I see a lot of computing in vehicles as being: nothing more than guaranteeing a revenue stream. It'll get marketed and sold as "efficiency" but the manufacturers are capturing those (alleged) efficiency gains by charging farmers to repair them.
This is also the case with GM crops too. For years, farmers cultivated seeds and replanted them for the next year's harvest. GM crops are typically constructed so they're not fertile beyond the current generation. Why? So the farmer has to re-buy the seed stock from the manufacturer.