Forcing a particular trade-off on everyone is entirely the point. It's the point of car safety, it's also the point of minimum warranties, electrical emission regulations, safety standards, etc.
That "what if" cost is going to be built into the cost of the laptop. Repairability doesn't always keep the cost low. The purchaser will definitely have to foot the cost otherwise it isn't sustainable.
We define the rules of the game and companies that can best implement those rules will succeed. That is capitalism.
It’s easier and more profitable for companies to make a product that catastrophically fails around about when the new model is out. So that’s what they do. Until just now when the EU is reeling them back in line.
None of that is relevant in this context: The parts are available, but the laptop is designed and built such that the alone keyboard cannot be replaced.[1]
[1] Not sure if this is possible on that specific laptop, but with a steady hand, a tiny drill, maybe a magnifiying glass too, you can maybe drill out the rivets, then replace the keyboard, then either re-rivet it back again or tap very tiny thread into the laptop and use screws.
What makes the repair more complicated is that 1) you need to take out basically everything to get to the keyboard. There are many different screws, luckily ifixit has a disassembly guides with their sizes. Still it was a bit painful to reassemble. 2) One of the things you need to take out or at least lift is the glued in battery - this took a lot of careful prying with thin plastic sheet and dousing it in ipa. 3) backlight is glued on to the case in an extremely fragile way, so it needs to be replaced with the keyboard or will probably look uneven after repair. (i reused the old one as I don't mind it but still, it could just have been glued to the keyboard itself and it would be easier to repair.
Why not? I don't understand how it's legal for manufacturers to produce absolute trash that can't be replaced and will just end up in a landfill. I think 7 years is far from enough, but because computers evolve quickly maybe 15 years is ok. For the rest of electro-mechanical goods, 50 years should be the baseline.
If a car or fridge from 50 years ago is still working with proper maintenance, that should be the minimum to be expected from products released today.
A ton of normal users will simply never bother to repair their own laptops no matter how easy it is, but you don't even have to recycle your own bottles and cans to see the effectiveness of bottle deposits work. Someone will usually come and recycle them for you in any big city.
Or to just mandate devices that doesn't need to be dispose so often.
> A ton of normal users will simply never bother to repair their own laptops no matter how easy it is
Doesn't matter, because simplicity contributes directly to prize and when you can get your existing device fixed for cheaper than getting a new one, you likely will do it.
Right now if you have two broken MacBook Neos, one with a broken motherboard and the other with a broken screen, you can make one working MacBook Neo without even needing to solder anything in just the time to takes disassemble both and reassemble one (which has been demonstrated in minutes).
You know that safety for pedestrians is also a very tightly regulated car safety category, right? Obviously, there's not much that can be done if you get hit by a car going 70mph, but the fact that most people should survive a 30mph impact with a modern car is mostly thanks to regulations requiring crumple zones specifically designed to protect pedestrians in a collision. And yeah, there are huge trade offs - I imagine people would generally prefer a car that doesn't need incredibly expensive repairs after a minor collision because everything at the front just crumpled, but then they would be guaranteed to cut off legs of any person hit - it's a trade off.
Or mandate in car cameras that record the driver to a blackbox to determine if the driver’s negligence caused others to be damaged. Also a cheap implementation that would immediately make drivers be more attentive.
Only partialy agree. As in - yes I agree in principle, but I don't agree it would be trivial.
My sister had insurance with a black box policy, where everything she did in the car was recorded. And on her drive to work, she would always get a threatening email saying "we've recorded you going 70mph in a 20mph zone, if this continues we will cancel your policy". We had to ring them up and demand the GPS trace, and guess what - at one point she was going on the motorway above a 20mph road, but the system probably just did "what is the speed limit at X/Y coordinates" and was getting 20mph for the nearest road. We've had to do this several times when she had the policy.
My own Volvo XC60 frequently tells me I'm going over the speed limit as it thinks the road I'm on has a 50mph limit when in fact it's 70, and in another place it thinks it's 30 when in fact it's also 70.
Not to mention that the speeds entered on Google Maps are often just wrong and take forever to update. And it's funny when people like Harry Metcalf say that every new car he tests insists that his own private drive has a 20mph limit when obviously there is none. Imagine if you couldn't turn that off!
So yeah, very easy to implement(and it's a great idea!) but in practice it's one of these "looks easy on paper, but in reality it's super hard to do reliably".
It is not a given that being repairable results in worse build quality.
Most of the PC competitors of the last 15 years have struggled to even come close to achieving similar build quality.
I'm not sure who this mythical competitor could be, who is supposed to not only match unibody aluminium MacBook build quality, but also solve repairability, and come in with a final product that is cheaper?
That if it was possible to improve things, someone would have already done it. And they haven’t, so it must not be possible.
That feels a bit extreme… Maybe I’m misunderstanding?
But the tone I get from discussions about repairability and performance is that it would be trivial to make the device, if only businesses wanted to.
However, given the fact that it hasn’t happened yet from a variety of alternative manufacturers, the probability seems very low that the ideal device is possible with current technology at a price that is viable.
Basically, it is a competitive market (or was), and what won out was what was possible. Barring some leap in technology, it is unrealistic to assume we can do better without suffering tradeoffs.
The €14k Dacia Sandero ships with camera-assisted emergency braking and lane assist. By the time you get up to a €24k MG 4, you get full level 2 driving. These don't seem like very high price thresholds
Cars have much longer lifecycles that the repurposed consumer technology in the ADAS. A camera module is cheap, but a camera model for this particular make/model/year is outrageously expensive if not unobtanium 10 years later. Theres the famous f150 story where the tail light housing with blind spot monitoring cost $5k.
It's slightly worse, slightly more flex, thicker and heavier vs an Air in spite of having a smaller battery and more empty space. It's all trade offs.
If you want repairable, please buy a Framework or Lenovo. Backseat industrial designing through legislation is not the answer.
Again, why not? It's not mandating design, just minimal standards for repairability that should be obvious. If Framework and Lenovo can do it and Apple can do it on a $600 laptop, why can't everyone do it?
> why can't everyone do it
What everyone is missing: Because other manufactures do not have to; the profit margins are too good to give a shit, and they allow some pretty fierce competition within the target demographic:
<soapbox>
Sadly, the general public still just wants the cheapest option to consume their bullshit content, even if it needs to be replaced a year from now after their cat walks on it and causes critical damage.
The MacBook Neo is brilliant in that Apple takes a share of this market with a premium and affordable product that is basically just their previous generation phone, with the expensive bits likely sourced from their exchange program or surplus supply. Products that at some point the same people would've loved to have, but couldn't afford. Now repurposed with a larger screen, sporting the envied Apple logo, at an affordable price, and targeting that same demographic as the hot new thing, just one generation later.
I have a feeling we'll see this pattern continue, and it's genius. Minimizing waste, maximizing profits, and giving the consumers what they want, while maintaining a gap between low-end and high-end -- people that spend $$$$ still want to feel special, of course.
Don't get me wrong, the Neo is great, especially for us hackers, but it is absolutely not meant for us in any way. What is in our favor: it does, at the very least, raise the bar for these other manufactures that product absolute garbage.
</soapbox>
Someone needs to be a reference as to what is feasible in order for a standard to be established. Apple, Framework, and I guess Lenovo are the ones doing this these days. RIP the others.
If anything, the extra material for the case would be the perimeter length times the perimeter wall width times the height.
That's what they did?
Perimeter length = 2*335mm + 2*235mm
Wall height diff = 2mm
Wall width = 1mm
(2*335 + 2*235) * 2mm * 1mm = 2,280 mm^3
For instance
(3m+5m)(2m)/(2(2))=5m^3
The delay setting in your profile (mine is set to 2).
New Feature: Delay - https://news.ycombinator.com/item?id=231024
There's a new field in your profile called delay. It's the time delay in minutes between when you create a comment and when it becomes visible to other people. I added this so that when there are rss feeds for comments, users can, if they want, have some time to edit them before they go out in the feed. Many users edit comments after posting them, so it would be bad if the first draft always got shipped.
Delay is initially 0. The maximum effective value is 10. It only applies to comments.How about all the energy waste for manufacture of what are "engineered" as effectively disposable components & assemblies in numerous facilities?
Also scattered local emissions, not only at the factories and delivery ships & trucks, but consumers kick up all kinds of exhaust and waste just earning the money to participate in such a scheme. And way more so for short-lived products that are the least bit overpriced compared to how they could be from the same factory.
???
What makes this "backseat"? When it comes to consumer products, legislation is often the only answer in most cases.
What makes this case different? Why should there be an exception carved out for laptops?
But it _could_ save us from Lenovo or Dell or any other company copying Apple's design practices (and the latter largely already has), while, as another poster mentioned, not mandating design per se, but rather just setting minimum standards.
You can still legislate parts availability and availability of docs.
You can legislate parts pairing or outright ban it
There is plenty that can be done, just need competent lawmakers
The fear is that regulations ossify industries and that's why heavily regulated industries like healthcare, education, and transportation have seen basically no innovation in 50 years. If you mandate that all electronic devices must have USB-C cables, how can anyone invent something better than a USB-C cable? And for what, so people don't have to have multiple cables? That's not even in the top 100 problems that a government body as large as the EU should be concerned about.
> Whenever government regulates things to benefit people, people tend to benefit.
Healthcare, education, transportation, and housing would all be counterexamples depending on how you want to frame "benefit."
> It seems like the Macbook Neo has a lot of those properties as well for a very inexpensive device that is extremely easy to repair.
This is counter to your point, no one regulated that Apple make the MacBook Neo easy to repair. Apple is incentivized to follow the market.
That already happened with Micro USB. The EU initially mandated that manufacturers agree on a standard socket, because the absolute zoo of charging ports back then was counter-productive and only generated e-waste. Ultimately they agreed to use Micro USB, but obviously that's not what's used today.
These regulations are not just dumped on the manufacturers - there's a period of consultation and a grace period to implement them. If something actually better came up, you'd eventually see it mandated.
While I generally am quite content with that particular mandate and it does more good than bad, I would have to disagree on this. Something better doesn't come from nowhere - hell, USB itself has gone through a long and arduous path until it came to the (messy) standard it is today. This is essentially banning any other standard to grow and be improved upon with feedback and iteration.
It took Apple a looong time to adapt USB-C, which was already running circles around Lightning five years after the introduction of the latter. Ironically Apple participated in the development of the standard. They just couldn't be arsed to implement it.
Multinationals don't do anything unless they absolutely have to. Apple notably all but threatened to move out of the EU due to USB-C regulations. They were actively preventing their users from having a better standard because it hurt their bottom line in the field of accessories.
Wut?
Not to get distracted, but aren't these three all incredible examples of innovation over time? Healthcare alone is significantly better than it was 50 years ago and it's not really close. 50 years ago, this hip new treatment called electroshock therapy was being used to "treat" being gay. It was also within touching distance of getting a lobotomy for depression or anything else your husband thought was a problem.
You could maybe argue mRNA vaccines or semaglutides are big innovations, I think we've made a ton of progress against HIV, and it seems like we've made progress against cancer, but when you factor in how much government money goes into this research and compare it against the advancements we've seen in computational technology it's a lot less impressive. You could buy a raspberry pi for like $50 today that outperforms every computer made 50 years ago, whereas the cost of most medical imaging has actually increased [3]. Likewise the inflation adjusted cost of college degrees and building new rail lines or really any infrastructure has increased precipitously since 1970.
1. https://www.cdc.gov/nchs/pressroom/releases/20250416.html
2. https://www.ucl.ac.uk/news/2022/jul/no-evidence-depression-c...
3. https://www.jacr.org/article/S1546-1440%2822%2900710-4/fullt...
On some metrics. On affordability, new cars are considerably more expensive. Whether that's a worthwhile tradeoff is beside the point. The GP's point is that there's no free lunch, and your example doesn't address that.
For my part, cars are more comfortable (bar all controls in a touch panel and ever more propietary software) and fuel efficient
That's widely incorrect. EU mandates some active systems (TC, ABS) and some basic level of physical protection, but majority of gains there have been driven by manufacturers trying to ace eachother in EuroNCAP rating
EU makes sure woefully unsafe car can't be sold, sure, but most of the progress here has been manufacturers, and non-car-related road safety improvements.
You didn't say why this is a bad solution. The government mandates that cars get safer every year and fatalities are down 78% from the 1960s. Whenever government regulates things to benefit people, people tend to benefit.
> One of the things macbook users praise the most is "build quality", which often means the solidity of the device, lack of flex, etc.
It seems like the Macbook Neo has a lot of those properties as well for a very inexpensive device that is extremely easy to repair.