1) no electricity, everything down but fiber, wifi, HA and the doorbell (they run off an UPS)
2) internet down: no problem, you just cannot reach the home automation from outside
3) Home assistant down: zigbee devices are paired together (like buttons + bulbs) or I have physical zigbee relays controlling dumb bulbs.
But, as said, I have some subsystem not fully working when (3) happens, like a zigbee button controlling a tasmota-based fan control.
We survived for over 100 years by getting up and flipping a wall switch, so the risk of a few hours without smart features shouldn’t be a showstopper.
Alternatively, both Sonoff and Home Assistant do a thread dongle for about $30 that you can use simultaneously with a zigbee one. Plus if you have any of the following, they can be used as a Thread border router: Apple TV, HomePod, Echo G4, Eero 6/7, Nest Hub, Nest Wifi, Google TV Streamer. There's also the OpenThread Border Router which can be used on certain ESP32 hardware (ESP32-S3 for $10 or ESP32-H2 for $6?) but that obviously requires more work.
I didn't really care for the way it became a sysadmin job where the stakes of a bad update or me not reading some release notes were that my light switches didn't work until I sat there and futzed around with it. I'm a programmer, enjoy Linux admin, run a whole bunch of servers....but having to dive into logs and YAML configs because the lights in my kitchen won't turn off is just not ideal. Similar issues with HomeKit, except when things mysteriously stop working there's even less ability to diagnose, given Apple's design principles that everything "just works", so apparently providing detailed error messages or diagnostics is gauche.
Usually when I had some zigbee issue, it was because of a crappy product (eg some wired air sensor that would spam the zigbee network every 1 second with a lot of data), so then I just stop using such devices and before I buy I check compatibility with HA / zigbee2mqtt.
This makes me a little weary of your comment. I don't think I'd really care if my lights not working was due to a "manufacturer being flaky" if they worked yesterday, but don't today.
Are you talking about devices being flaky on first setup (which sucks, but is understandable), or are you talking about them being flaky after an update?
That is, the flakiness isn't due to HA updates breaking connections or an unstable server, but rather manufacturers designing closed and/or brittle systems. Try as they might, the HA authors and surrounding community can only do so much for such devices.
Also, I believe the word you're looking for is 'wary' (as in, to be skeptical or suspicious), not 'weary' (as in, to be tired). :)
(For temp and humidity sensors the Bluetooth Xiaomi sensors are great and they're about $5 each)
I feel like half the griping about HA is people realizing all the hardware errata and physical reality bullshit embedded developers have to paper over on a daily basis.
E.g. no, you can't just read contact sensors without debouncing
I should probably just remove them, but I don't have any automations that depend on them.
It's been a bit since I was operating it, but I did at times certainly have issues with updates—perhaps just individual plugins or system updates that created an issue, either way, still a situation where I had to sit at a terminal and debug. I only ever ran the Docker version, not the OS, so perhaps this is less problematic in a more completely controlled stack.
I don't think I'm alone in this view, broadly speaking: https://www.reddit.com/r/homeautomation/comments/18hvl3b/i_g...
At the beginning (0.7 or maybe even earlier) I remember to have to reconfigure or reset my instance a few times a year. Those times are long gone.
I ran the docker version on a QNAP for a long time, now on a Home Assistant Green.
https://homeautomation.substack.com/p/setting-up-home-assist...
00. Installation method - you don't flash ISO into your thumb drive, no you boot ubuntu from usb drive, THEN download ISO and THEN flash your boot drive. This caught so many people. RTFM of course but FM should just say this in huge letters - BOOT UBUNTU FROM USB FIRST.
0. Host method - you either run this in docker and don't get like half features (add-on store) OR install HAOS and don't have access to your device anymore. Wanna use your computer for something else? Tough choice.
1. Integrations vs add-ons vs HACS - why is this so complicated. Add-ons only work when you run HAOS, but HACS works on any installation method. I've spent so much time moving from docker to HAOS just to realize HACS store works with with docker.
2. Root - I've succumbed to running HAOS and now I have no idea how to get root remote root access. Yes I can connect keyboard and a monitor which I had to get for this reason only and there's 0 fun to work on basic terminal on a high res monitor where you can't change font size.
3. UI performance - wanna explore data from one of the devices - either select all sensors from it and let UI crash trying to display 50 charts or pick sensor one by one (with broken scroll on desktop app).
4. Copy paste - how did they managed to break this on their desktop app is beyond me.
5. Disorienting UI - whenever I wanna reboot something I'm pissed off. Whenever I wanna find integration or add-on - I'm pissed off. Why there's media and to-do list? Why do I have to enable professional mode to unlock some menu's?
6. Bizarre way of doing things - wanna add derivative sensor? Install file editor, find some file, then fight fucking YAML syntax and then maybe reboot or reload or restart. Good luck! Why I need to add home assistant user and create password for my light switch?
Bonus. They are not selling their own device (which is great way to get started) and offering some cloud subscription which usually is on path of enshitiffication.
And don't get me wrong, there are things that it does't great and is very powerful and useful, but man it is difficult.
Integrations are running under control of Home Assistant, while addons are separate applications, running under control of the OS. With HAOS they have that control as they are delivering the OS. They are simply lacking the manpower and experience to deliver a smooth control of external applications for every OS.
> 2. Root - I've succumbed to running HAOS and now I have no idea how to get root remote root access.
Yes, that is a pretty big flaw. They are trying to make it a simple as possible, they are probably flooded with complaints and issues from too many people with barely enough knowledge. But this whole setup they maintain with HAOS is really annoying. Though, there is documentation[1] for this.
> 5. Disorienting UI - whenever I wanna reboot something I'm pissed off. Whenever I wanna find integration or add-on - I'm pissed off. Why there's media and to-do list? Why do I have to enable professional mode to unlock some menu's?
They are doing too much, want to serve everything to anyone. Really annoying, but I guess the loud voices kinda demand this one-fits-all-solution. They should really rethink they focus and architecture. Maybe making clear, distinctive apps for specific jobs might be better.
> 6. Bizarre way of doing things - wanna add derivative sensor? Install file editor, find some file, then fight fucking YAML syntax and then maybe reboot or reload or restart.
To be fair, that's really depending on the devices and nowadays often an old solution. They have worked really hard to get rid of YAML for the normal jobs. But at the end of the day, HA is a hacky tool in a vibrant, extremely diversified environment. They are doing their best to deliver a unified solution, but it takes time, and sometimes still some hacking. HA has come a long long way, and is changing really hard, and they probably have still many technical debts left from a decade ago. Their biggest problem at this point is probably history and complexity. People who are using it for years, which are still knowing the old ways, or encountering old documentation.. And it's hard to get a clear picture with all the things that HA is offer and doing.
[1] https://developers.home-assistant.io/docs/operating-system/d...
2. Ssh and vscode addon?
6. Been using it for 2 years and have yet to touch yaml.
Something about HAOS uses docker to install and manage extensions, whereas if you run the HA docker container it can't as docker-inside-docker isn't supported (?), and thus some functionality is unavailable (at least at the surface level).
Here are a few “smart” things my home assistant can do in my home, which are impossible with an “appliance”:
- when washer or dryer is done (detected via power monitoring), send push notification. But ONLY send it to the people that are home at this moment. If nobody is home, send it to the person that left home last. (i store this state in a custom _last_person_departure_ variable).
- if the washing machine door was closed after it was emptied, send push notification to the people that are home. Remind them to leave the door open. (front load washer where closing the door leads to mildew)
- If a water leak is detected, send a push notification. if not ACKed within 3 minutes, send a “critical alert” to everyone’s phone.
- If nobody is sitting on the couch (pressure sensor under the cushions), and no media is playing on the tv, turn off the tv after 20 minutes.
- turn on the hallway light if motion detected or if the front door is in an open state. but keep it on if the door remains open (chatting with a neighbor, bringing in packages, etc) Importantly, delay the “turn off” action with a timer and reset that time if more motion detected or the door is re-opened.
- when i’m on a work zoom call, automatically turn on a red light next to my home office, so family doesn’t interrupt.
That’s just the tip of the iceberg. I also get a push notification when the printers ink is below 20%, and more.
Unfortunately a truly smart home requires effort to set up. Because a smart home is unique to YOU. Everyone has different workflows, habits, and preferences. It’s not a generic off the shelf component like buying a washing machine, where the user preferences can be simplified to a handful of settings.
I even once had my wife add a bulb and while it wasn't easy, she did it.
When a year later I asked brother about the some random bulb he had - didn't work anymore.
It's even better, because Norwegian law gives 5y guarantee on electronics - could just have this bulb replaced as faulty in the shop.
Pairing a Matter device takes much longer than pairing a Zigbee device through Z2M in my experience, and the Matter add-on still sometimes needs restarting as it refuses to allow any more devices to pair after a while.
But - rather than need a Zigbee dongle (or manufacturer hub) if you've got Apple or Google devices such as HomePods you've got a ready made Thread network as they act as border routers.
If I now get a _single_ Thread/Matter/Zwave device to replace one that's broken, ignoring the cost of a new radio for HA, I have to give very serious thought to where it's going to live vs signal availability as I build out yet another network.
tldr: HA is fantastic for coordinating disparate devices, but RF still bites.
I can't just add a new Thread device at the other side of my house as the walls attenuate the signal between it and the border router. Equally I can't start replacing Zigbee devices willy-nilly in case I create Zigbee dead zones.
Not the biggest problem in the world but it does mean I'll likely need to get some pointless Thread smart plugs as temporary network extenders when I add my first Thread device.
This doesn't work when mixing Zigbee+NonZigbee devices.
I would think that as smart homes become more popular the number of people not using the defaults will rapidly decrease and manufacturers will be less and less beholden to them.
It always seems like you need $100+ dollars of hardware to run it well, not just a pi and an SD card.
It seems like it's a lot better now, but until recently it didn't seem like it was anywhere near PLC grade reliability.
Is it up to the level where you could install it at a non-technical users house and expect it to run for five years without maintenance?
Yes, if you're using the manufacturer's half-assed smartphone app, but if you're on Home Assistant, like basically anyone who's serious about their smart home, having multiple kinds of smart devices isn't really a problem. It's just one more radio to configure. Some people run both Zigbee and Zwave, some people run Zigbee + Wi-Fi or even Zigbee + Zwave + Wi-Fi + cloud integrations, Home Assistant doesn't care.