News for hackers. Stuff that matters.
Re:White House announces 25 percent tariff on Chinese tech g... by Washuu on Friday June 15, 2018 @12:13PM (#17320897)
I am in the middle of starting a business around a product that will get slammed by this. I was going to import the components and have the boards built here.("Made in the USA" labels are huge for my target market.)

Assuming I am parsing all of this correctly it will end up being better for me to have the PCBs assembled into the products in China and not create jobs in the USA.

Re:White House announces 25 percent tariff on Chinese tech g... by rgbrenner on Friday June 15, 2018 @12:27PM (#17321048)
You can't use the "Made in the USA" label like that anyway. It must be all or virtually all made in the USA. At best you could label it "Made in USA from Imported Parts" or "Assembled in USA."

https://www.ftc.gov/tips-advice/business-center/guidance/com...

Re:White House announces 25 percent tariff on Chinese tech g... by Washuu on Friday June 15, 2018 @12:32PM (#17321094)
My intention was that the casing and PCBs would be made in the USA. The only China sourced parts would be the PCB components.(Not finalized/assembled PCBs.) As far as I know that would qualify for "Made in the USA".
Re:White House announces 25 percent tariff on Chinese tech g... by emilfihlman on Friday June 15, 2018 @02:50PM (#17322436)
You are 100% correct in this. You can call your device just fine as made in the USA even if your passives, ICs and so on come from elsewhere. The other commenters don't understand anything about electronics.
Re:White House announces 25 percent tariff on Chinese tech g... by lozenge on Friday June 15, 2018 @01:04PM (#17321423)
By that reasoning a frozen meal could say "made in the USA" meaning the cardboard box was made in the USA.
Re:White House announces 25 percent tariff on Chinese tech g... by Washuu on Friday June 15, 2018 @01:50PM (#17321891)
* Case (Plastic) - USA Origin

* PCB (Milled, Drilled, Components Soldered) - USA Origin

* Connectors - USA Origin

* Firmware - USA Origin

* PCB Components (Items affected by the tariffs) - China or Otherwise

As far as I know that would qualify as "Made in the USA" or at the minimum "Assembled in the USA". Over 75% of the components have USA origins and the final transformative step is done in the USA.

Please note that I am not trying to be deceptive in my future product's labeling.(6+ months until launch.) However, with political changes like these tariffs they are something that can basically change my stance on how I decide to source in the USA.

Re:White House announces 25 percent tariff on Chinese tech g... by gxs on Friday June 15, 2018 @02:11PM (#17322079)
I think he said that at best you could say "Assembled in the USA", don't think he was arguing that piece of it.
Re:White House announces 25 percent tariff on Chinese tech g... by starky on Friday June 15, 2018 @11:13PM (#17325606)
Who wrote that horrible document? How exactly does someone determine whether "All or virtually all" is applicable in their situation without specific values. Sure there are examples, but they are not exhaustive.

In Canada the definitions are simple and clear:

A "Product of Canada" must have its final transformation done in Canada, and at least 98% of the costs are incurred in Canada

Something "Made in Canada" is as above, except the value is 51% and includes a statement about whether imported parts were used.

Re:White House announces 25 percent tariff on Chinese tech g... by nodesocket on Friday June 15, 2018 @02:53PM (#17322467)
> "get slammed by this..."

Wait, a second... Do you really know this? Have your supplier prices already increased? By how much on average of each imported component? What's the total increase per unit shipped?

Re:White House announces 25 percent tariff on Chinese tech g... by kayfox on Friday June 15, 2018 @12:25PM (#17321019)
Yeah, I'm worried because a nonprofit I'm working for recently decided to manufacture a convention badge in Ohio rather than China because it was barely economically feasible... with this tariff change it may eat too far into our donations.
[dead]
Re:White House announces 25 percent tariff on Chinese tech g... by nickpeterson on Friday June 15, 2018 @04:04PM (#17323077)
Just an aside, I used to work at a custom label printing place (in Ohio even, funny that), which often got convention orders because they had holograms on them.

I think security around conventions can be concern (you don't want someone doctoring a phony badge and walking into a convention with a few thousand people.

Re:White House announces 25 percent tariff on Chinese tech g... by russellbrandom on Friday June 15, 2018 @12:47PM (#17321260)
Sorry to hear you're getting hit by this! I wrote the Verge piece, and would love to talk to you about how this is affecting your business plans. Drop me a line at [email protected].
Re:White House announces 25 percent tariff on Chinese tech g... by EpicEng on Friday June 15, 2018 @12:31PM (#17321089)
You mean "assembled in the USA"?
Re:White House announces 25 percent tariff on Chinese tech g... by nickthegreek on Friday June 15, 2018 @01:32PM (#17321701)
I think 'Designed & Built in the USA' or 'Designed & Assembled in the USA' might be better nomenclature.
Re:White House announces 25 percent tariff on Chinese tech g... by NDizzle on Friday June 15, 2018 @12:24PM (#17321009)
* assembled in the USA.
[dead]
Re:White House announces 25 percent tariff on Chinese tech g... by unholythree on Saturday June 16, 2018 @01:50AM (#17326084)
Sounds like by your absurd standards the B-2 bomber wouldn't qualify as being made in America.
Re:White House announces 25 percent tariff on Chinese tech g... by azinman2 on Friday June 15, 2018 @03:35PM (#17322817)
I don’t fully understand he tariffs, but wouldn’t you be subject to 25% tariff anyway if it was made in China?
Re:White House announces 25 percent tariff on Chinese tech g... by jessaustin on Friday June 15, 2018 @06:39PM (#17324283)
Are we to infer that BOM is the big cost for you, even though you're doing all the manufacture in USA? That seems unlikely to me, based on what I've heard about electronics manufacturing.