The human eye is normally rated at 1 arc minute == 1/60 degree rather than "1 arc second == 1/60 arc minute". This is around 1/30th the size of the full moon.
8K 32in at > ~.32m is "Retina" quality since it's > 60px / deg. 4K achieves this at >.6m. The former is ~275 dpi which is close to the ~300 dpi Apple used to define "Retina" for their iPhone.
Personally, I would prefer 120+ fps rather than higher resolution. I have both a 120Hz & 60Hz LCD on my desk and the difference when scrolling or dragging windows is quite noticeable.
At that distance you cannot see the whole screen anyway, as the 1 arc second resolution is limited to a very small spot at the center of your vision.
Personally, I'd prefer a taller aspect ratio than 16:9, which seems designed for movies. 4:3 or even 1:1 (square) would suite desktop and medical imaging work better.
[1] http://accessories.us.dell.com/sna/productdetail.aspx?c=us&c...
Side note: sizeUp for osx is very good, I wish there were something as good for Ubuntu.
I would like to see OLED's at this size/resolution, which would accomplish something similar.
For me the resolution of the hardware doesn't matter a bit until the OS can handle it properly. I don't know what you're using but I would guess that it's not Windows 7.
I haven't used Windows 10 on a high DPI external monitor, but it certainly works well on the Surface Pro 3/4's high DPI screens.
I've heard the Creators Update has some improvements to display handling, so we'll see how that goes.
This is on Microsoft, no question. Apple handled the transition much better with the hard coded 2x scaling factor. Windows is more flexible with dpi in theory, but a PITA to code against in practice.
(Being able to snap windows to half of the screen was one of the biggest UI quality of life improvements I can remember in a long time. MacOS is lagging on this one, as they are optimizing the experience for one screen.)
As far as I know, the Mac version of the feature requires two windows to be selected to share the screen, which is less flexible than the Windows implementation where I can temporarily pop a window into half-screen mode to peek at another window that's beneath it.
Frankly, a 4K 32" monitor is quite crappy..
The Apple Cinema display is 2560×1440 (1440p) at 27" and plenty of people use that. That was a pretty standard resolution for 27-30" screens before 4K became popular. Most people would find 2160p (i.e. 4k) at this screen size to be really nice.This matters mostly with tiny type. The difference there is astounding.
I recently argued that 1080p is no good at anything larger than 24" for a monitor, but that it was just right for 24".
Personally I like larger pixels, larger display at a longer distance (maybe it's my vision - gettin old?)
You must have really good eyes. When I sit a normal distance away from my 32" I really have to make an effort to see the pixels. Unless you are a graphics professional I would say it's more than enough. I also work on a 40" 4K and there you can really see it's pixelated, but if you use your computer for coding/mail/browsing, it's still fine.
Low dpi screen is "fine", sure - until you get used to better ones.
I've been coding on a 40" 4K monitor for a while now and it's awesome to be able to see most of my code without scrolling. I would love to get better resolution but I don't want to go back to 32" (4K is good enough for coding but it's definitely pixelated at 40").
You can buy TVs in humongous sizes so I'm sure there is no technical limitation, but apparently they seem to think there is no market for large monitors. The first one on the market with a 40" monitor with a resolution above 4K has my money.
What would this translate to in PPI or any other unit / measurement we might be familiar with.
I think the 1 arc second threshold is too strict by about an order of magnitude.
https://www.quora.com/How-do-you-convert-arc-seconds-to-mete...
"One degree is an angular measurement. 1/60th of a degree is an arc minute. 1/60th of an arc minutes is an arc second, a rather small angle but an angle none the less.
(...)
1 arc second subtends 1 meter at a distance of 205,787 meters (I did say it was a small angle)."
Which should mean that 1 arc second subtends one millimetre at ~200 meters? Do we really have that high visual acuity?
100 pixels per millimeter at 2m? 200 at 1m? That's ~25 * 200 = 5000 pixels per inch at 1m. I would think 1200 dpi would be more than sufficient at 1m...
[ed: missed the bit about: "from standard viewing distances" - still sounds rather extreme]
1 arcminute is a more realistic size for what people can reliably resolve I think. I guess we need significantly better than that to avoid a subjective feeling it is blurry but, that is about what we can actually reliably tell the difference between I think. We cannot tell the difference below 25 arcseconds or so though, it is not possible without larger pupils.
http://hyperphysics.phy-astr.gsu.edu/hbase/phyopt/Raylei.htm...
Light field displays just mean even more resolution increases because they're usually created by throwing more pixels at the problem and sticking microlenses over it. Although it doesn't have to be planar, afaik you can also achieve light fields by modifying the phase by altering the properties of the medium in its depth dimension. But you still need to encode a lot more informaation, so whether you have 2D or 3D pixels... you still need more resolution.
Or an arc second, a second being 1/60th of a minute
(as an aside, I was prevented from posting this for some time due to 'submitting too fast,' but I've only posted five times today, twice in the past hour & thrice in the hours before that — how strange!)
I might just not be very sensitive but I don't notice the positive difference when switching to 4K, but the negative ones such as various apps not respecting dpi scaling settings are immediately visible. On 15" any app that not scaled is unusable.
Going from 4K to 8K for a 32" monitor may seem like a small improvement, but it is a subtle sensory improvement that just makes using a computer more pleasant. Until displays reach 1/60th of an arc minute from standard viewing distances (roughly the discerning power of the human eye under assumptions on contrast), I will always want higher resolution.
Other than resolution improvements, it would be nice if someone would attempt an HDR light field display. This would ultimately lead to a monitor that is indistinguishable from a window.