News for hackers. Stuff that matters.
Re:Synology Security Advisory by landgenoot on Thursday November 19, 2026 @05:48PM (#50567640)
I think the answer is mTLS.

Unfortunately, Synology apps don't support it.

Re:Synology Security Advisory by LoganDark on Thursday November 19, 2026 @06:00PM (#50567783)
mTLS is the one that requires a client certificate. right? It can be quite difficult to get protocols other than HTTPS to behave well with that, mostly because the application has to worry about it and many don't bother.
Re:Synology Security Advisory by landgenoot on Thursday November 19, 2026 @06:33PM (#50568105)
Yes, that's correct. It's like SSH private keys, but for HTTP
Re:Synology Security Advisory by LoganDark on Thursday November 19, 2026 @06:36PM (#50568142)
I think if you want mTLS to have any significance, the application itself has to support it, otherwise you're just doing a VPN again and there's no good reason to use it over Wireguard (especially because an mTLS server will respond to port scans and a Wireguard server will not)
Re:Synology Security Advisory by QuantumNomad_ on Thursday November 19, 2026 @07:15PM (#50568450)
WireGuard is also very much like SSH private keys.

A basic config to set up a VPN that only adds access to services on the VPN itself is very short and simple, both for WireGuard server and for WireGuard clients.

You can run the WireGuard server from your home computer. For example on your NAS machine itself or some other machine you have at home. And open the port for WireGuard to the outside.

Also some routers can run WireGuard server on the router. For example Mikrotik routers have WireGuard server built in and ready to configure [0]. Routers running OpenWrt can too [1].

Or you can rent a small VPS and use that as your WireGuard server.

And then, either which where you run the WireGuard server, run the WireGuard client on your laptops, iOS and Android devices, and connect client apps using VPN internal IP addresses. And your NAS etc too, if the WireGuard server isn’t running on the NAS machine itself.

It really is quite quick to set up with server and all clients across devices.

The only real hurdle is that on iOS you have to turn the VPN back on manually after reboot and which is sometimes easily forgotten if you only use your self hosted services occasionally. But you quickly realize oh right I have to open the WireGuard app and turn on the VPN again whenever you try to use one of your self hosted services and the client isn’t connecting.

[0]: https://manual.mikrotik.com/docs/virtual-private-networks/wi...

[1]: https://openwrt.org/docs/guide-user/services/vpn/wireguard/b...

Re:Synology Security Advisory by 8fingerlouie on Thursday November 19, 2026 @06:07PM (#50567839)
Compared to faffing around with certificates, Wireguard or if you're lazy, Tailscale, is a breeze to setup.

Generate the config, one per client, setup the client to only route specific RFC1918 networks and disable on well known wifi networks, and that's it. It literally works for years without any maintenance.

Tailscale is easier (presumably), but also puts a corporate entity between you and your data.

Re:Synology Security Advisory by devilbunny on Thursday November 19, 2026 @07:33PM (#50568607)
Tailscale is ridiculously easy, and headscale is a thing. It doesn't support everything corporate Tailscale does, but it covers the basics of "get me into my network from anywhere". You can run it on a $1/month VPS that has a public IPv4 address.

I don't work with computers professionally, at all. It still only took me about 2 hours to get the VPS, get Debian going on it, set up headscale, and connect to it from home. Do I still use corporate Tailscale? Yes, it has some features that aren't beautifully supported on headscale, and so for the moment I'm fine with that. But I do have my backup plan in place if I need it.

Re:Synology Security Advisory by rlt on Thursday November 19, 2026 @07:58PM (#50568803)
Personally I’d rather let Tailscale manage securing the public-facing service than use Headscale. Tailnet Lock seems like a good compromise. And as much as I’d like to use it, I don’t trust Tailscale SSH.
Re:Synology Security Advisory by devilbunny on Thursday November 19, 2026 @08:16PM (#50568930)
I agree, but if people want no corporate dependency at all, it's there.

I have a headscale instance, on one of those $1/mo VPSes, and I don't intend to use it unless I have to. But if I have to, it's there.

Re:Synology Security Advisory by tough on Thursday November 19, 2026 @10:02PM (#50569632)
if you don't mind me asking, why don't you trust tailscale SSH?
Re:Synology Security Advisory by catlifeonmars on Friday November 20, 2026 @12:15AM (#50570451)
[delayed]
Re:Synology Security Advisory by letsseeok on Friday November 20, 2026 @04:01AM (#50572021)
> I don't work with computers professionally, at all.

You trust yourself with a VPS and correctly configuring a beast such a Debian?

I don't mean to be harsh but even as a professional developer I'm frequently humbled by our grumpy sysadmins on (to me) arcane stuff I didn't knew existed.

Re:Synology Security Advisory by KAMSPioneer on Friday November 20, 2026 @01:23PM (#50579429)
As a grumpy sysadmin, I am also frequently humbled by other grumpy sysadmins' knowledge of arcane stuff I didn't know existed. :)
Re:Synology Security Advisory by aborsy on Thursday November 19, 2026 @09:06PM (#50569266)
A corporate in the control plane is not an issue for me. But what if their infrastructure is compromised?

They are prime targets and have large attack surface. Even bigger companies are frequently compromised. It's a matter of time before it becomes publicly known.

Re:Synology Security Advisory by Liuser on Thursday November 19, 2026 @06:28PM (#50568058)
VPNs these days are far easier to configure than mTLS (which often need proxies on both server and client side to handle the TLS terminations and needing to worry more with certificate lifecycle).

mTLS is a better option for distributed systems (service to service mesh networks for attestation of workload identities) instead of for human users.

Re:Synology Security Advisory by gmerc on Thursday November 19, 2026 @06:44PM (#50568217)
tailscale / wireguard on your router are completely transparent
Re:Synology Security Advisory by bigwheels on Thursday November 19, 2026 @06:47PM (#50568238)
Strongly agree, Tailscale / WG is the way go. Unless something needs to be available to randos on the Internet, in which case mTLS is still a huge headache.
Re:Synology Security Advisory by para_parolu on Thursday November 19, 2026 @06:50PM (#50568269)
How are they bad? You turn it on and it works. Don’t need to touch it. Don’t need to deal with anything but pasting key or scanning qr code
Re:Synology Security Advisory by landgenoot on Thursday November 19, 2026 @07:00PM (#50568351)
I want to make sure every picture I take will be backed up to the NAS.

Do I turn on the VPN when I take a picture and turn it off when finished? Every time?

What if I need multiple VPN's? Living in a country that has a bad geoip reputation, it's already a struggle of switching on and off for individual websites to work.

Re:Synology Security Advisory by xeetzer on Thursday November 19, 2026 @07:43PM (#50568685)
You can do split tunneling and only forward certain ips (or apps) through the vpn for your first problem.
Re:Synology Security Advisory by landgenoot on Thursday November 19, 2026 @07:48PM (#50568736)
With increased battery consumption, yes.
Re:Synology Security Advisory by happyopossum on Friday November 20, 2026 @12:14AM (#50570445)
[delayed]
Re:Synology Security Advisory by rpdillon on Friday November 20, 2026 @11:15AM (#50577024)
Split horizon DNS doesn't have any effect on battery consumption.
Re:Synology Security Advisory by Gigachad on Thursday November 19, 2026 @07:45PM (#50568704)
You set up Tailscale as a split tunnel so requests to your own server go through the vpn while everything else does not.
Re:Synology Security Advisory by akerl_ on Thursday November 19, 2026 @08:26PM (#50569001)
How do I set up mTLS for my phone's camera roll?
Re:Synology Security Advisory by landgenoot on Friday November 20, 2026 @03:51AM (#50571950)
Re:Synology Security Advisory by akerl_ on Friday November 20, 2026 @07:07AM (#50573601)
The thing that’s nice about using WireGuard here is that it works for any app on my phone; they don’t have to individually support it and I don’t have to individually configure certs for them.

I have one on-demand VPN with a list of internal IPs to route.

Re:Synology Security Advisory by katbyte on Thursday November 19, 2026 @07:28PM (#50568568)
How does a rando tv connect to something behind a vpn like Emby or jf?
Re:Synology Security Advisory by Gigachad on Thursday November 19, 2026 @07:46PM (#50568714)
Your TV is probably on your home network. If not you could use one of those cheap travel routers to connect the hotel tv to your local
Re:Synology Security Advisory by solyin on Friday November 20, 2026 @12:06PM (#50578060)
The thing running Emby/jf has a high chance that there's a Tailscale client for it.
Re:Synology Security Advisory by cloudfudge on Thursday November 19, 2026 @07:41PM (#50568664)
How many mTLS configs are anything but all-or-nothing access? It is so common for an app to slap mTLS on the endpoints and make the rule "anyone with a valid cert is admin on this API; anyone else gets 401." This is a step back towards a superuser/regular-user model.

Now if you're going to use mTLS as the basis for mature authn/authz, that's a different story. But I never see anyone do that.

Re:Synology Security Advisory by landgenoot on Thursday November 19, 2026 @08:00PM (#50568825)
Applications are vulnerable for exploits.

mTLS prevents connecting to the application without valid cert.

Sure the reverse proxy handling the mtls can be exploited, but so can any VPN server as well.

Re:Synology Security Advisory by Liuser on Thursday November 19, 2026 @09:16PM (#50569353)
authn and authz should be separate. mTLS is used first for identity attestation, what you’re allowed to do after you’ve proven the identity is authz.
Re:Synology Security Advisory by catlifeonmars on Friday November 20, 2026 @12:21AM (#50570483)
[delayed]
Re:Synology Security Advisory by Liuser on Friday November 20, 2026 @12:57AM (#50570690)
Yeah that I get, but I’m disputing that the tool (mTLS) is not at fault for being misused, authz (rather the lack of it) is being misused. The tool (authn) is working fine.
Re:Synology Security Advisory by cloudfudge on Friday November 20, 2026 @03:08AM (#50571592)
We are saying the same thing. mtls is fine for authn. But nobody actually uses it for just that. They use it for both authn and authz. The authz policy is almost always just "identity != null".

If I told you not to use a power drill as a hammer, you wouldn't claim I'm saying the hammer is at fault for being a bad power drill.

Re:Synology Security Advisory by catlifeonmars on Friday November 20, 2026 @03:40AM (#50571861)
[delayed]
Re:Synology Security Advisory by Liuser on Friday November 20, 2026 @08:51AM (#50574640)
Yes, this I agree with that. JWT is simpler to work with by virtue of remaining on http layer 7 and parsing claims out of JSON compared to working with extracting identity and other embeddings from x509.

I just take issue (maybe pedantically so) calling it a bad tool and blanket statements that no one uses it for just authn but for authz also. It’s not used for authz. The absence of authz shouldn’t be blamed on mTLS.

Re:Synology Security Advisory by blueplanet200 on Thursday November 19, 2026 @09:44PM (#50569521)
Tailscale is so easy to setup for a NAS and so nice to use.
Re:Synology Security Advisory by anonymousiam on Thursday November 19, 2026 @10:21PM (#50569759)
There's a third-party repository for Synology that includes WireGuard. I've been using it for over a year now and it works great. (Presently posting this from Chenzhou, China where I have full access to my US-based Synology NAS courtesy of WireGuard and WSTunnel.)