Like in the video: https://youtu.be/DAX2_mPr9W8?si=Njn749InqNCbjhQd&t=822
With better understanding you can achieve far better results. I no longer rinse or even scrape dishes. with the right approach my dishwasher performance has been stellar. The user manual also includes proper tuning to local water hardness levels.
Poor dishwashing also discourages people from cooking at home, which leads to less healthful diets. So it's an important thing to get right.
Dishwashing is fascinating.
For example, he kept on saying that pods are not better in previous videos, but in the study he presented in this video, it showed that pods are performing significantly better than powders in every category. The study (which was not linked and I couldn't find it) was sponsored by a powder maker which the video recommends, but even this study showed just on par results with pods.
He also specifically calls out Great Value brand powder as one he finds to be consistently on par with pod performance
At the end of the day, it'd have been much better for this community if we could have just gained access to a proper study comparing different cleaning options and learn from it instead of watching a 40 minutes video that doesn't say much and doesn't link to the study which is briefly mentioned there.
The video explains why there always is a pre-wash step. Regardless of whether it comes with a pre-wash-powder compartment or not. I will try his solution.
All I would add to what you've said is that when my Bosch does include a pre-wash in a cycle, it checks how dirty the water is and only drains the pre-wash water if is dirty. If the dishes haven't caused the water to become dirty, it keeps the same water for the main wash cycle.
Also, I want to expand upon my first paragraph a little: I'm not having a dig at anyone who doesn't understand their dishwasher. I am just venting/observing that the world is filled with all kinds of different people and reminding myself that I shouldn't make assumptions about people as often as I do.
I've had this realisation many times, but it doesn't hurt to have it again. Communicating with people is lot quicker and easier when I remember that.
On the other side, you see appliance companies responding to that and shrinking their manuals of useful content because they assume you might just go watch YouTube videos instead. Some of the better ones might even include a QR code or 3 to officially produced YouTube videos, though so far that still seems rare.
Even in this video is the surprise reveal that something that used to be very common in manuals, full cycle timing diagrams, was "hidden" on a data sheet attached inside the door itself. Admittedly, it's great in that case to know that should that model be taken to repair that a repair shop might find that data sheet easily without having to search manufacturers' websites, but on the other hand some of those diagrams would be quite useful to me if I was the user of that machine.
my dishwasher after few months suddenly instead of filling water and starting wash cycle initiated some kind of fill & drain cycle that went for a while without going into wash mode.
i called in service. they replaced pump, solenoid. talked with manufacturer directly, swapped a couple of main boards. it made dishwasher snap out of it.
few months later it started again. this time i allowed it to do whatever it was doing. after 15 minutes it started to wash.
over the time i noticed that dishwasher does this water cycling every few months and adds extra time to estimated program duration.
about once a year after asking a few questions if sprayer hands/filters/etc are clean, it will add 2 hours to wash cycle.
none of it described in manual, manufacturer service personal and "Factory support" that service talk to know about it (maybe they do by now. they didn't few years ago)
my dishwasher manual breaks down each program. pre-wash exists only in half of programs
You can tell if your dishwasher has a pre-wash cycle if it does a short run, then you hear it draining, and then it does a longer full run. I expect it probably does.
Also, you can always add a bit of detergent to the main compartment of the dishwasher for prewash. The normal detergent compartment has a lid so the the detergent stays dry until the main wash cycle, and most prewash compartments are just an open tray.
Come to think of it, if there is a latching door on the detergent tray, your dishwasher definitely has a prewash cycle, or else they’d skip the door entirely
Alec also mentions this briefly in the linked video; if manufacturers could avoid the cost of a latching mechanism, they absolutely would. Its presence means a pre-wash cycle exists.
This dishwasher also came with a box of Miele pods (and they encourage you to buy more). I think it's designed first and foremost to not use powder.
This is because the profit margin on them is much, much fatter. Miele still makes powder if you want to use theirs.
The manual is likely referring to not hand rinsing dishes before loading them which was very common 30 or 40 years ago. I had to train my Mother to stop doing that.
This! I mean, at least get all of the low-hanging fruit with a quick, needle-spray pass of hot water. And to do so while the plates are still fresh so that stuff hasn’t had the time to dry.
Like, we’re talking about powering through table settings for a half-dozen people at a family dinner in less than 60 seconds. Plates, bowls, cups, silverware; everything done in about 10s per person. This isn’t any kind of a deep scrub; it’s removing everything that will come off easily as fast and expediently as possible before the dishes go into the washer.
Note: This dishwasher provides the optimum cleaning performance without the use of a prewash detergent and further enhances our standards of sustainability and efficiency.
The Extra Dry setting seems to help with getting the glass and ceramics dryer. Plastics still come out quite wet since it uses a hotter final rinse rather than a heating element to get dishes “dryer”.
Alec's dishwasher videos are based on some rather primitive dishwashers. For instance he talks about his test unit not flushing out the spray arms, but Bosch/Siemens filters the water going to the spray arms so it wouldn't recirculate dirty water anyways. Same deal with the prewash. Bosch uses a turbidity sensor to determine how many "prewash" cycles to run and when to reuse the water, something his test unit very clearly does not.
I know this type of person very well. They always have some reductionist approach to things, where for them, the expensive stuff is mostly marketing with added bells-and-whistles and largely works the same. My experience is that this isn't quite right. Some brands do have a premium that is more related to style/status but if you buy some seriously engineered stuff it will work much better most of the time.
For reference I'm pretty cheap too but try to be pragmatic. My fridge is a $600 Frigidaire (AEG/Electrolux) top freezer unit. The main selling point was that another youtuber (an appliance repair guy by trade) pointed out that it still has a mechanical timer. They get mocked by appliance sales droids but the top freezer design is significantly more efficient than the alternatives and the lack of electronics mean that you're more likely to be able to repair it.
I agree that KitechnAid is more on the higher-end side, he even said himself that it's kind of a premium device. It doesn't surprise me, because at some point in your life you want to stop with the frugality shenanigans and just want stuff to work if you can afford them.
To be clear that's not a critic, I tend to be as cheap as can be reasonable as well, it's generally a decent way to proceed, to avoid overpaying for useless over-marketed, over-engineered stuff. I'm just trying to give some context but I think we are in agreement anyway and I do believe anyone who watches him long enough will get the gist of it at some point.
have you watched his videos? dude is on the spectrum.
to be clear, he makes good vids. but his fascinations exist for a reason.
He is known as Angry Dishwasher Man for a reason.
One thing I can't get a good answer to is whether the "prewash" step is universally the case or not. I have a good Bosch dishwasher and there's no compartment for a bit of pre-wash detergent. I don't even know if my dishwasher cycle has a pre-wash step. I would assume the dishwasher manufacturer knows what's best.
The owner's manual gives advice about not pre-rinsing the dishes because the food bits actually help the wash cycle, so I'm wondering if it works differently from the two-step process in this video.