Modern mesh WiFi systems I've seen do that so well. I know in theory that I could create a VLAN + SSID on my OpenWRT router and APs just for iot devices to only access the internet. But setting that up on a TP-Link mesh was a couple of taps in their app. Doing it on my OpenWRT devices would be quite a bit more hassle.
For the APs, I could use a mesh kit like the TP-Link Deco unit I installed for a friend recently. Super easy setup, reasonable price (cheaper than equivalent OpenWRT hardware I'd buy), wired backhaul up to 2.5Gbps.
Openwrt supports the zyxel gs1900 switch, which goes up to 48 ports.
Was also surprised, then not surprised, to learn it's used as the front end on many of the new generation of 3D printers.
https://openwrt.org/toh/western_digital/mybooklive
They're slow, but great for stuff that doesn't need to be fast.
> However, OpenWISP may not be the best fit for very small networks (fewer than 20 devices), organizations lacking IT expertise, or enterprises seeking open-source alternatives solely for cost-saving purposes.
https://github.com/rubenbe/opensoho
It is still a work in progress, but it is easy to deploy (one golang binary based on pocketbase)
Based on your experience, as OpenSOHO seems to use OpenWISP, what do you wish you knew about OpenWISP before you started this?
The config one is a neat little piece of software. It will merge UCI configs and check the connectivity. You can adjust virtually any file with it (although not always with merging). My main issue with it is that it can't be easily temporary disabled from the central controller (I currently implement it by not sending the config, but that triggers retries on the AP end)
The monitoring one spits out an amazing amount of data, although it needs some post processing to make it actually useful. Unfortunately that one can't be extented to add custom entries. I'm currently missing an easy way to see which MAC address is connected which LAN port since OpenWRT DSA puts everyone one the "br-lan".
The whole thing is polling based. So it is quite chatty on the network since I use lower polling rates to make the updates fast. (I suspect on a setup with 100+ you will have longer polling times). All in all the existence of these daemons saved me a ton of time handling networking corner cases. Kudos to the Openwisp team.
On the device side, the agent only activates if there’s no WAN (so the main router isn’t a client). A new AP gets a LAN IP via DHCP, discovers the controller, pulls its config, and if none exists the controller can hand back a default Wi-Fi setup to come online immediately. Start with Wi-Fi-only changes (reload instead of reboot), aim for a “plug into LAN + power and it just joins” UX, and avoid OpenWISP complexity. It’s built from boring, reliable primitives: DHCP, HTTPS, git, tar, Lua.
I think I'm going to have an agent start coding this up today and see where it gets.
I do notice quite some people focus the autodiscovery part where for me that's less of an issue (I do agree it would be VERY nice). The OpenWISP configuration on each AP is limited to: set IP address of controller & shared secret and click OK. The rest is all magically done for you by the controller.
I do like the 304 idea, in practice it uses the same conceptual idea as the OpenWISP system: check if the MD5 (instead of SHA1) for the current config and the controller config are still identical and download and apply if not.
An important reason I why chose the OpenWISP is that they "just work", are well tested and included in the OpenWRT package list. My main goal is to keep the OpenSOHO project as small as possible ;)
For now, I like reasoning about /etc config files. I'm more familiar with those than OpenWISP. Adopting an abstraction like that offers some portability and possibly future proofing. But that is just the config format and how it is applied though really.
I think once the router is setup, most SOHO users only ever have to add/replace (provision) APs and manage the WiFi settings. I want to make that kind of provisioning and management automatic. Making the APs as stateless as possible - kind of like a Chromebook. The agent will only have basic dependencies (lua, curl, tar).
For this to really work it'll probably have to grow to support VLAN-backed SSIDs and wireless backhaul links. Wireless links would probably need to be wired for their first time setup. But I'd be happy even if it just solved managing my own APs and SSIDs.
While we're discussing: someone did an attempt in the OpenSOHO discussions to have a freshly flashed AP register automatically with OpenSOHO:
https://github.com/rubenbe/opensoho/discussions/1#discussion...
The Openwisp agents running on the AP are surprisingly lightweight (they do use Lua, tar, curl and a bit of shell scripting)
VLAN backed SSIDs are one of main reason I started OpenSOHO (although support is not there yet) I don't want to log into each AP to set it up manually. I do have a wired back haul, but support for wireless backhaul will probably arrive, since quite some people have one set up.
In case you would find an easy method of bootstrapping the setup via DHCP, certainly let me know! (Maybe that's easier to be discussed on GitHub)
I could wire up all of that manually. But I'm excited for the chance to learn something new
OPNsense (and pfSense) are neat, but I personally don't need an IDS/IPS right now, and I like to be able to run the router fanless.
One thing that OpenWrt could use immediately, for basic home WiFi router functionality, is easier ways to add guest-like VLANs from the Luci Web-based admin UI. (I currently have a guest VLAN config that I partly cargo-culted with numerous steps in Luci years ago, largely based on a blog post, and that would be a pain to reconstruct on a new install.)
For techies whose households include non-techies, a little IDS/IPS could help keep some nasty traffic off your home Internet pipe, and I suppose that could now run alongside OpenWrt on some of the more powerful plastic boxes, or on a PC with the right WiFi devices/APs. (In addition to use of VLANs and routing to minimize damage from all the malware-infested devices, and also thinking "zero trust" for the techie stuff you run.)
You don't need a fan for OPNsense or pfSense? Plenty of folks running protectli boxes without a fan, they're one of the most popular platforms for both OS'
So I really can’t say I recommend their hardware…
- they’re shit at accepting contributions
- they’re shit at providing attribution
- they’re shit at providing any support whatsoever to anyone who prefers other hardware (even with their paid software).
In addition to pfSense (which is what I think you're criticizing) and all of its open source, we're upstreaming things to FreeBSD and fd.io VPP
Try this on a fresh copy of FreeBSD 'src':
% git log --first-parent --since="1 year" | sed -E 's/\^.*Sponsored.\[Bb\]y:\[\[:space:\]\]*//p' | grep -i Sponsored | sed -E 's/.*\[Ss\]ponsored\ \[Bb\]y://' | awk '{$1=$1};1' | sort | uniq -c | sort -rn | head
or for VPP, look here:
https://www.stackalytics.io/unaffiliated?module=github.com/f...
https://arstechnica.com/gadgets/2021/03/buffer-overruns-lice...
that "client" (every wireguard implementation is both client and server, but I'll use your label) is still in-use, and still bears our copyright (which Jason tried to strip, but I guess his father the lawyer might have explained the law to him.)
Not seeing where this supports any of the assertions upthread.
Looked at your CV (it's in your profile), you don't seem to last very long in any job. https://cursedsilicon.net/resume.pdf
Funny how you didn't complain about his current employment at AWS, or his previous work at iX Systems (trueNAS, primarily responsible for the port of ZFS on Linux to FreeBSD) or the fact that the whole epoch based reclamation in the FreeBSD kernel is based on his work.
Also you should stop editing your comments after they're replied to. It makes it awfully confusing
Bringing that tech stack to a firewall is a logical move.
the adblock package does a great job of blocking ads and other nasty stuff, it doesn't have fancy statistics or an interface like Pi-hole but it does its job without complaining
OpenWRT Two is scheduled for late 2025 from GL.iNet and should go for ~$250.
I'll just leave this here: https://www.netgate.com/blog/pfsense-software-embraces-chang...
OPNsense are unlikely to be able to make this transition, as they can't even reliably work on the FreeBSD kernel.
https://web.archive.org/web/20160314132836/http://www.opnsen...
https://www.wipo.int/amc/en/domains/decisions/text/2017/d201...
From the URL
---
The Complainant is the owner of the European Union trademark registration Nos. 012771457 for OPNSENSE (figurative mark), filed on April 8, 2014 and registered on August 20, 2014, for goods in class 9, and 016287716 for OPNSENSE (word mark), filed on January 26, 2017 and registered on May 9, 2017, for goods in class 9.
The Complainant also owns the domain name <opnsense.org>, registered on September 4, 2014, at which it promotes and enables users to download its open-source OPNSENSE firewall.
The disputed domain name <opnsense.com> was registered on April 8, 2014, and is not pointed to an active website.
---
I want you to look closely at the date April 8, 2014, and then I want you to look for anything that occurred before that date, vs. all that occurred after.
How does bad faith exist when the domain "opnsense.com" was registered a full 8 months prior to the January 2, 2015 OPNsense announcement?
Point in fact, we published nothing. That website was not ours. We pointed the domain at it.
you also are ignoring this bit: ---
However, in contesting the Complainant’s supplemental submissions made by the Complainant to substantiate the asserted use of the trademark before the registration date of the disputed domain name, the Respondent introduces new elements which, in the Panel’s view, are relevant for the assessment of the Respondent’s position in this case and will thus be taken into consideration.
Indeed, in its Supplemental Filing, the Respondent states that a document submitted by the Complainant in its Supplemental Filing (as Annex 17) does not demonstrate the Complainant’s use of the trademark OPNSENSE but provides, instead, evidence of use of a trademark PFSENSE in which the Respondent has rights. The Respondent also informs the Panel that it is the manager of Electric Sheep Fencing LLC, a United States company which owns the United States trademark registration No. 3571276 for the trademark PFSENSE, registered on February 10, 2009 claiming first use as of February 19, 2005, for services in International class 42 relating to technical support services, maintenance and development of computer software; and of the International trademark registration No. 1176766 for the trademark PFSENSE, registered on August 28, 2013, for goods in class 9, including computer security software. The Respondent also states that its company Electric Sheep Fencing LLC has rights in a book referenced on the document submitted by the Complainant entitled “pfsense.org The Definitive Guide to the Open Source Firewall and Router Distribution”.
---
OPNsense were using the pfSense mark, and we were taking legal action to stop them.
Why? You don't want competition in the space?
>Or just undercutting Wi-Fi vendors like Ubiquiti who base their work on OpenWRT anyway
Huh? The older edgerouters were based on vyatta. The newer ones on a custom linux distro, neither of which are OpenWRT. They hired the original author of pfsense to build them a firewall based on Debian from scratch when they realized vyatta wasn't going to meet their needs. The UDM kernel is very much not OpenWRT
https://github.com/fabianishere/udm-kernel
Being excited about OpenWRT is great but spreading bad information and for reasons I can't fathom hoping for the downfall of other players in the market, not so much.
You're (perhaps unintentionally) also spreading bad information here.
The original 'author' of pfSense was Scott Ullrich, not Chris Buechler. While they were partners in the project, Scott was technical, and Chris did a lot of work back then on documentation, by by his own admission back then, "I am not a developer", and this, even though he was CTO.
http://freesoftwaremagazine.com/articles/interview_with_jeff...
Ubiquiti originally hired two of the devs out of Vyatta to maintain their fork of the Vyatta codebase. These two were known on the Ubiquiti forum as 'stig' and 'An Chen'. Both left in the first half of 2016, and then (and only then) did Ubiquiti hire Chris Buechler, in an attempt to maintain and extend the Ubiquiti firmware. Chris has since left Ubiquiti and is now at Alta Labs.
Not sure about today, but this company used to sell hardware whose features were only "fully enabled" if the buyer used the company's closed source OS. The hardware might work with an open source OS but the buyer would not get the same performance.
At the time, the HN comments continuously supported this company. It appeared that for these commmenters, this was a worthwhile sacrifice. They would just keep recommending Ubiquiti. (Unsolicted recommendations)
I thought Ubiquity’s firmwares were all based on Debian. Is this no longer the case?
The WiFi APs were not
I hope their experiments with the "OpenWRT One" keep going. I'd love to see OpenWRT take a (deserved) bite out of the "SMB firewall vendors" like Netgate or OPNsense. Or just undercutting Wi-Fi vendors like Ubiquiti who base their work on OpenWRT anyway
Something I'm excited to try myself in future is running "OpenWISP" [1] to manage a small fleet (three) OpenWRT devices in parallel for a deployment in a shared workshop. This seems to also be something that OpenWRT could be better at integrating, but it's nice to see "a vendor" tackling it
[1] https://openwisp.org/