I love the idea of Framework, but the upgradability seems questionable to me. I base this off my experience with desktops where I've rarely over the decades upgraded more than the hard drive and RAM. When I'm looking at upgrading the motherboard it seems I just end up going all the way and getting a new case/ps/etc at the same time. Maybe that's just me though?
The niche created by Framework, in contrast, is all about reuse. It's just a different game.
I do wonder how many people repurpose old laptops when they get a new one. I have three old laptops, two of which I haven't turned on since I transferred my stuff to the next one. My partner uses the third one to game sometimes, but she's recently gotten a new laptop of her own (her old one is ancient), so I expect she'll stop using that one as well.
My current laptop is a Framework 13 (from 2022) that has already seen some upgrades and repairs that wouldn't be possible on any of my old laptops. I expect this chassis and SSD to last quite a long time, with periodic mainboard and RAM upgrades.
If you're a Framework customer it's not entirely unlikely you buy a case for your older mobo and now you have a power efficient home-server (or something) at your disposal.
My Dell XPS13 came with a 1TB SSD, which recently was replaced with a 4TB one...
And the reason why RAM is soldered is because they need the signal integrity to run "high performance" graphics on it, it's not (just) because the manufacturer hates you. This is why FW desktop has soldered memory too.
LPCAMM is coming, which is an interface with better signal integrity than SODIMM or whatever they're called, I hope it will bring RAM upgradeability back to office machines. I really only need to render videos and a slightly animated WM on my laptop so I don't care for HIGH PERFORMANCE AI IGPU when I have a desktop at home.
If we’re talking Thinkpads, Framework has a better offering IMO, especially if you don’t get Lenovo edu prices. I think for a lot of IT departments the Frameworks are quite attractive, now. And that’s before they even really developed the business offering.
How’s Linux support on the cheap non-thinkpad Yoga? If it doesn’t boot, can you easily remove the SSD and protect your data before sending it in for a few weeks? Fixing a Framework yourself doesn’t void its warranty. In a deadline situation this can be quite existential.
You are seemingly also come from a place where the individual grand total is your measure, but if finances are limited, the progressive, as needed upgrade path may be more of a value in itself. Something something shoes.
I don’t think the "just buy a Mac" or the cheapest laptop possible crowds are the target audience. I can totally see something like the Framework 12 becoming the platform for eg. a school's FOSS based tech program with good maintenance scalability. Especially outside the US.
I haven't checked those %s but just using them notionally.
But it's definitely more percentage value in a laptop with touchpads, wifi, keyboard, battery and display over a case that's just some bent metal and if you're fancy a glass panel.
I'm pretty happy with the Framework 13 form factor (though, after 3 years of use, I'd still probably prefer a 16:9 or 16:10 screen over the weird 3:2 they ship with), and absent any future catastrophic damage to it, I don't see a reason to replace the chassis.
And I've already upgraded a few things in it: I have a newer mainboard (well, to be fair, I got it due to a warranty repair where they decided it was cheaper for them to upgrade me to the 2023 model), and I upgraded the built-in speakers and the webcam. I'm thinking about upgrading the screen as well at some point. In two years I'll probably replace the mainboard and RAM (not that I want to replace the RAM, but I have DDR4 now, and I'll presumably need DDR5).
That 1TB I thought was enough might not be, and suddenly I need to buy a whole new machine to upgrade.
- Getting cement in the charger port
- Dropping the phone on its screen breaking it
With some phones both of those could be full replacements.
Framework has released fairly consistent upgrades for the Framework 13, but there's no guarantee that they will continue to do so, will release upgrades for the Framework 16, etc.
I think in a few years when they've been in business for closer to a decade than not and released updates across the whole product line, it'd be pretty hard for anyone to make an argument that that _shouldn't_ be factored in.
Also being the most Linux friendly laptop also means they have very long update lifespans and being well built tend not to break…though there are plenty of repair parts and spares.
I'm curious if you have a different experience where you ditch a laptop after less than 3 years because a single part has broken as you imply.
I passed it down to family and bought a new laptop, as my attempt at repairing also damaged the plastic parts which were holding the bezel in place.
Overall every laptop I had suffered mechanical damage of some sort and occasionally it was just something I had to live with, as I didn't want to chance e.g. soldering.
With my Framework I know any regular repair is a 30min job, as I assembled and disassembled it several times already.
Also, while I can repair laptops myself, I for sure don't want to.
For me cheap storage is the only sell and even that I can mitigate with tiny flush external SSD stick and/or NAS.
How about in five years from now when all of that is still fine, but you just want to replace the mainboard.
What about when framework comes out with upgrades down the line? The great thing is because they’re so modular you can just buy that and slap it in without having to buy an entirely new machine.
That’s the appeal
RAM, SSD, and battery are also the very minimum in terms of serviceability on a laptop, they've been traditionally user-serviceable. It's components like the touchpad, display, ribbon cables, etc. that haven't been traditionally easy/possible to replace.
Also, my biggest issue with my HP Envy x360 is not getting inside. It's annoying to have to buy new (third-party) replacement feet after removing them (and shouldn't be done by HP regardless), but it's not a big problem. And the service guide is quite good. It's the fact that I haven't been able to buy a new first-party battery, I can't buy a new screen, mainboard, or trackpad if I end up needing one.
Sure I can (and have) upgraded the RAM and SSD, and replaced the battery with a third-party one (well actually two, the first one didn't have some ID chip, and would show a warning screen on every boot). But the RAM and SSD are just upgrades, and batteries are consumables. I can't reasonably repair damaged or failing parts if the screen cracks, if coffee gets spilled in the keyboard, if a port gets damaged. Only 4 parts are listed as available (pen tip, RAM, AC adapter, and Wi-Fi card), and only the AC adapter is in stock.
Some of the business lines are better, but the ultrabook styles that Framework is competing with can be pretty difficult to work on because the internals are so optimized for performance in a small space. The big manufacturers also tend to change the internals enough between models/versions, that if you want to fully gut and swap the insides, or maybe just replace the keyboard, the chassis is incompatible. Framework is designed to service over a longer period of time.
There is a tradeoff, because the super-optimized layouts of the big manufacturers are often superior. But for me at least, the Framework is good enough, and when I do need to make changes, it's a better experience. I'm also voting with my wallet for the change I want to see, even though the cost is probably a slightly worse laptop.
One could even allow other manufacturers to offer parts and do certification for a fee.
It should be possible to push down prices and make update paths more appealing.
https://community.frame.work/t/community-market-category/522...
If they stop delivering, ill not buy their next thing, and ill be sad.
And the upgradable internals sound like more of a hassle than a benefit - especially since buying a different device will be cheaper and probably a better experience since they don't have to engineer for replaceability.
Theoretically you'd get the option to plug in stuff not available in other laptops like strix halo - but then they still don't offer that in laptops. So meh.
And upgrading laptop components after 5 years just doesn't sound like a good value proposition.
My work laptop (Fedora Linux, Dell XPS)is over 5 years old. I haven’t bothered to replace it, but will next year just because. The old one will become a retro gaming device for the kids.
Sure, I might have spent a few hundred more on my Framework 13 back in 2022, but if I'd bought a Dell XPS 13 instead, I probably would be fully replacing it with a new machine in 2026 or 2027. But with the Framework, I'll instead only buy a new mainboard and RAM. My "next laptop" will cost ~$1000 for the same specs as something that would cost ~$2000.
So sure, it's going to take me a bit longer to realize the savings, but there still will be savings, and I appreciate the sustainability aspects too.
The author of the fine article’s strategy of used Thinkpads is more sustainable because reuse is among the most sustainable practices and there is an abundance of Thinkpad repair parts and spares machines.
Of course, Thinkpads are not terribly upgradable. But upgrading is often the opposite of sustainable…in many cases CPU’s, etc. are fast-fashionesque.
How many times have I thought, maybe i should get 2tb just in case, and then end up using 500gb. With framework, I'll buy the 1TB and the cost to upgrade is very low if I ever need to.
Same thing with memory. Maybe i need 16, maybe 32, maybe 64. I tend to buy more than i need out of fear. I just don't have that fear with framework.
Oh, and don't even get me started with repairs. If my screen breaks, i know the time to fix is however long their shipping lead time is, since the repair itself will take me 15 minutes.
In general, i think that value depends on how you see a computer. $1000-2000 is a lot to spend on something you use for fun. It's really not much to spend on something you use every day for work. And it's even less if your company is paying.
I'd kill for a fully transparent phone or laptop shell.
I'd pay $1000 more for this aesthetic. Double if it's in the florescent neon colors of 90's /00's Nintendo / Apple designs.
As an example, I recently bought a car, and went with a small crossover SUV because I wanted something that could handle light off-road duties on the weekend. One of the reviews deducted points because the car's clearance was too high and it meant the car didn't hug the road. The clearance is the point of that car. The manufacturer literally took one of their other models, raised it an extra 9cm, and stuck some minor cosmetic bits on.
In the same way, nobody buys a Framework laptop because it's competitive on price. This review does acknowledge that, sort of, but I think it discounts that someone might not be able to afford a Laptop 13 but might still pay a small premium for a Laptop 12 because they like the ethos or they benefit from the customisable design.
Is that group a bit enough niche for profitability? I'm not sure, but I think the review should either directly ask that question or put it to the side.
Beyond practical repairability and sustainability, I appreciate the possibility of swapping out a mainboard for another with a completely different arch
[0] https://frame.work/products/deep-computing-risc-v-mainboard
[1] https://store.deepcomputing.io/products/dc-roma-risc-v-mainb...
Here is the “ugly” part of the Ars summary (as in good/bad/ugly):
It's just too expensive for what it is. It looks and feels like a lower-cost laptop, but without a dramatically lower price than the nicer, faster Framework 13.
Other Brands Notebooks are not upgradable, not repairable and the most frustrating part are the batteries - which framework offers an original replacement for.
"Modern" office notebooks don't have to be that powerful. I'm still using a T480s which will only render unusable as soon as the battery dies with no <100 bucks replacement parts available.
I think buying a framework is an investment for people planning to keep the device for 5+ years and/or want to support the right to repair movement.
I'm really suprised and impressed they managed to ship such a great device and keep their promises for so long even if it is not the besteht bang for the buck (short term). Keep up the great work.
But, the premium paid is high. And, their warranty support was, in my opinion, not a good experience. The expansion cards, which are just USB dongles internal to the computer, are gimmicky and waste space that could be used for something useful, like a slot for a second SSD, or larger battery.
I ended up sending back the Framework 13, I recently purchased, because of the warranty support experience for a mechanical issue with a single expansion card (usb dongle). Framework support had me jump through hoops for a week, repeating tests, asking me to answer the same questions again and again, and finally, "now do everything again and make a video and upload it to youtube" [actual request from Framework]. All for a part that retails for $9. The experience spooked me, and I sent back the laptop for a refund during the 30 day return window.
The Dell I replaced it with has an inferior screen*, a slightly inferior keyboard, vastly inferior CPU cooling (the Dell thermal throttles under heavy load), but Dell was half the price, and it arrived at my door 8 hours after I ordered it. And, unless things have changed, Dell warranty support was always excellent.
Hopefully Framework fixes the issues with their warranty support process. I hope they succeed.
* Dim screen on Dell mitigated by using the money I saved on the laptop price, to buy a portable 13" e-ink monitor which is vastly superior to the Framework display when working outdoors.
Where "value" is purely monetary, I think that pretty succinctly sums up my experience/views on the Framework product line.
They make good laptops, but you can generally get more for fewer dollars. If you're shopping on price, you can probably just skip right over their entire product line.
That doesn't mean that their offering doesn't have value. It has value has a vote with your wallet for sustainable, repairable products. It has value as an easily repairable and customizable laptop. It has value in some esoteric use cases it can be customized into (e.g., 4xM.2 NVME slots).
Would love to see some reviews just get this out of the way up front and spend more words on the product itself.
Personally, I'm glad there's a company out there serving a market niche besides being the lowest cost, most value-engineered product. I don't mind paying a bit extra for that in exchange for the other value I get out of it.
(And all that said--at the high end specs their prices get a fair bit more competitive. The price to upgrade a laptop from 16GB -> 128GB on Dell's site is _more than an entire FW16 w/ Ryzen 9 + 96GB RAM_.)