I'm guessing these letters are also easy to create with a CNC machine.
(Now that the page has loaded I see he identifies engraving machines.)
https://archive.org/details/standardletterin00claf/page/42/m...
> I don’t know how this first proto-Gorton was designed – unfortunately, Taylor, Taylor & Hobson’s history seems sparse and despite personal travels to U.K. archives, I haven’t found anything interesting – but I know simple technical writing standards existed already, and likely influenced the appearance of the newfangled routing font.
The author's comparison of the fonts actually argues against them being of the claimed lineage. Consider the many differences between the Taylor, Taylor & Hobson machine’s fonts and the Gorton machine’s fonts. If Gorton had a license to use the Hobson machine designs, which they did, they could have simply copied the TT&H fonts verbatim. But they clearly did not. Why not? I think it's likely that they simply preferred a different design, one closer to the letterforms that were more commonly used by draftsmen in the American market. In other words, the Gorton reference design was not the TT&H font design.
At least, that's my best guess based on the evidence presented.
> Each of these reappearances made small changes to the shapes of some letters. Leroy’s ampersand was a departure from Gorton’s. Others softened the middle of the digit 3, and Wrico got rid of its distinctive shape altogether. Sometimes the tail of the Q got straightened, the other times K cleaned up. Punctuation – commas, quotes, question marks – was almost always redone. But even without hunting down the proof confirming the purchase of a Gorton’s pantograph or a Leroy template set as a starting point, the lineage of its lines was obvious. (The remixes riffed off of Gorton Condensed or the normal, squareish edition… and at times both. The extended version – not that popular to begin with – was often skipped.)
While these standards date from around 1930, they were based on much older lettering textbooks. The oldest that I have seen was from 1871, and these German textbooks did not differ much from the American textbooks quoted above.
Maybe you could explain what part of the comment you replied to you think is either wrong or already covered by the article, so that either we can realise what we failed to notice in our first reading or so someone can explain to you why you're wrong in thinking that comment isn't correct in the context of having read the full article :)
> In the end, I’m sticking with Gorton for the whole branch since that feels the most well-known name, but I feel ill-equipped to make that call for everyone. You might choose to call it Gorton, Leroy, TT&H, Taylor-Hobson, or one of the many other names. (Just, ideally, not Linetica.)
Since the author was concentrated on the particular letterforms that seemed more consistent in the lineage observed, the usage makes sense. But that naming, even with the acknowledgement that it likely comes from the standards of drafting of the day:
> I don’t know how this first proto-Gorton was designed – unfortunately, Taylor, Taylor & Hobson’s history seems sparse and despite personal travels to U.K. archives, I haven’t found anything interesting – but I know simple technical writing standards existed already, and likely influenced the appearance of the newfangled routing font.
> This was perhaps the first modern pantograph engraver, and perhaps even the arrival of a concept of an engraving font – the first time technical writing was able to be replicated consistently via the aid of the machine.
But it also seems a reasonable critique of the article that it's mislabeling to call the MIL-SPEC-33558 and ANSI Y14.2M or even the WWII equipment lettering "Gorton" simply by visual similarity without evidence to show ancestry to the specific engraving machines, dies, or letter sets of Gorton/TTH/etc. And that is also done throughout both with direct evidence and without.
I also believe that it's more likely that the font was informed by what was commonly taught as good lettering for technical drawings in that era.
For example, consider the one-stroke gothic lettering in 1883's Standard Lettering, published by the Columbia School of Drafting:
https://archive.org/details/standardletterin00claf/page/42/m...
And here's A TEXT-BOOK OF FREE-HAND LETTERING, part of the TECHNICAL DRAWING SERIES, first published in 1895:
https://archive.org/details/textbookoffreeha00daniiala/page/...
Consider the "single-stroke lettering" suggested in that texbook:
https://archive.org/details/textbookoffreeha00daniiala/page/...
https://archive.org/details/textbookoffreeha00daniiala/page/...
Also consider the model forms for pre-penciled gothic lettering:
https://archive.org/details/textbookoffreeha00daniiala/page/...
It seems that such lettering was already common when the machines were introduced to produce similar lettering.
https://en.wikipedia.org/wiki/3
Playing cards use this style of lettering. Not sure how far back that goes but I kind of doubt they all derive from Gorton's specific engraving machines.
Called out in the article - "but I know simple technical writing standards existed already, and likely influenced the appearance of the newfangled routing font. [photograph captioned: From a 1895 “Free-hand lettering” book by Frank T. Daniels]"
TFA doesn't suggest that, at all. A font is a concrete instantiation of a writing style, and TFA is about the history of one such concrete instance - not the general style it's an instance of. Also the connection to drafting and lettering stencils is discussed in some detail midway through.
(Also more generally: kind of amazing to imagine reading an article of this depth, that mentions years of obsessive research and links to the author's 1200-page book on the history of typing, and thinking: "yeah this guy probably doesn't know about drafting".)
What I'm saying is that there are many "concrete instantiations" of drafting lettering style, that all look basically the same, because they all came from the same source, and Gorton is just one of them. So what we're seeing in elevators and on plaques is not "Gorton" specifically. While in contrast we do see Helvetica specifically on NYC subway signs, Johnston in the London tube, etc.
Too fine of a point? Perhaps. And also, it doesn't take away from the quality of the essay which is a delightful romp through the history of draftman's lettering showing up in all sorts of forgotten utilitarian places.
(But I've got to ask - what's with the ad hominem at the end? We should be above that.)
Open a couple of old drafting lettering guides (e.g. ones linked in sibling comments or TFA), and look closely. They'll obviously have a similar overall vibe, but there'll be tons of variations - differently shaped 3/4/7, where the curves start and stop on letters like CJGS569, whether the various corners are pointed or rounded or flattened, etc.
If your premise above is true, then we'd expect to see similar sorts of variations in the various fonts derived from drafting style, and TFA's entire point is that the author has collected hundreds of cases where we don't. Check his photos - they show the same font with the same idiosyncrasies, the off-balance G, two flattened points on the 4, the slightly asymmetric 8, etc. TFA is about the ubiquity of that specific set of letter shapes (modulo some variations that he discusses), not just of lettering that's generally in the drafting style.
(Also: in the best of faith and not meant as shade, you might want to look up "ad-hominem".)
If you look at the photos in the article, there are a lot of variations! For example, in the article, if you look at the first two sets of photos of keyboards, you see a variety of shapes, especially visible with the 6s/9s, 0s, Rs, Ss, etc. And then in the next set of photos (the ones with a selection of plaques), you again see a collection of various letter shapes - look at the varying shapes of Gs, Ss, etc. This repeats throughout, when you look at the random assortments of plates and signage.
Later on, after he discusses ANSI and DIN standards, the author goes on to say:
> In the regulatory space, the U.S. military canonized Gorton in 1968 as a standard called MIL-SPEC-33558 for aircraft and other equipment dials, cancelled it in 1998… then brought it back again in 2007.
Except that the specimens he shows right below, of ANSI Y14 and MS 33558 (and whatever the third one is), are very different from Gorton and even from each other - just look at those letter forms. Which makes sense, as their lineage is _not_ from Gorton, but from traditional lettering.
So that's what I mean - it's not that Gorton _specifically_ is everywhere, it's just that draftman's lettering style is everywhere, and in many variants, including the very popular Gorton one.
Edit: The above might sound too harsh, sorry. You're probably right, but after reading such a beautiful piece, your reaction was really a buzzkill for me.
Perfectly accurate though.
This is just a thing they failed to emphasize — maybe — considering the credentials, because it was blaringly obvious to them.
This feels more like a detrctive story about figuring out the origins of one concrete manifestation of a font and not a text about where that family of fonts comes from.
(The tail of the Q is a tell -- not a straight line, not a simple shape, but identical in lettering systems based on the engravers.)
This is just how you used to be taught to do lettering in a drafting class. The straight lines and simple shapes make it easy to do lettering with pencil or a pen, which is also why all the lines are the same width and all the line caps are rounded.
Later on these turned into stencils, which let users do lettering quickly by tracing the pen inside the stencil - and then turned into fonts for use in print. But all that came later. What we have here is just lettering people learned in drafting classes, and which was later used to make stencils and templates.