I don't think they called cellulose microplastic anywhere. The issue is that commercial teabags these days often aren't using pure paper teabags:
> The tea bags used for the research were made from the polymers nylon-6, polypropylene and cellulose
I believe the polymers are usually coming from the glue keeping the bag together. This is a known issue going back years [0].
0 - https://www.implasticfree.com/why-you-should-switch-to-plast...
> Following, ATR-FTIR analysis was performed in the teabags as well as in the leached mixture of nanoparticles plus fibers (Fig. 3). Both teabags and the leachate suspension matched their polymer composition being two of them petroleum-based polymers like nylon-6 (NY6, sample 1) and polypropylene (PP, sample 2), the third one (from the supermarket) being cellulose (CL, sample 3), a bio-based polymer.
I didn't see any mention of plastic binders or other material in the cellulose sample, just references to cellulose.
On the other hand, it was curious that they purchased the synthetic bags empty, but cellulose bags filled with tea, when it is pretty easy to find empty paper tea bags, so maybe there is something particular about the specific type of cellulose tea bag they chose?
> To such end, three teabags of different chemical compositions were used in this study: (1) empty nylon-6 (NY6) teabags (as a model of polyamide), (2) empty polypropylene (PP) teabags, and (3) commercially available teabags containing tea, and cellulose as the polymer composition.
Sometimes, the top fold is closed over with a small metal staple, but that’s not the only place the bag is sealed.
The different teabag composition materials were from separate types of teabags, not composition materials of the same teabag.
They've since reformulated the bags - can't find any statement about the new flat bags.
Edit: Also some tea bags for loose leaf tea like t-sac or finum brands have that crimp on the edge. However, t-sac confirms they use glue, but finum specifically claims to not use glues, so maybe it is jumping to conclusions that all bags of these sort do.
Are there other processes that work out cheaper than paper for teabag kind of applications these days?
> To such end, three teabags of different chemical compositions were used in this study: (1) empty nylon-6 (NY6) teabags (as a model of polyamide), (2) empty polypropylene (PP) teabags, and (3) commercially available teabags containing tea, and cellulose as the polymer composition.
They don't care. This is a junk paper that cites a bunch of other junk papers. It's published in the same junk journal that gave us the junk paper on black plastic kitchen utensils. I can't really say more without risking a defamation suit, but what you're looking at has nothing to do with science.
https://retractionwatch.com/2024/12/18/journal-that-publishe...
https://retractionwatch.com/2024/05/13/publisher-slaps-60-pa...
https://news.ycombinator.com/item?id=42494733 ("Journal that published faulty black plastic study removed from science index (arstechnica.com)", 63 comments)
You get nice news headlines with no tangible issues to health are found and it's easy to just prove a bunch of microplastics in all the things.
If I wanted an easy PhD I'd likely do the same due to how shitty academic hustle is in today's world...
The White House, taking microplastics seriously: https://www.whitehouse.gov/wp-content/uploads/2024/07/Mobili...
The White House pdf suggests a scientific consensus of some form, stating: “Researchers are sounding alarm bells over the growing presence of microplastics in the human body, and are concerned that the ingestion of microplastics and exposure to plastic-related pollution are posing a growing risk to public health.”
Not even the part about how you know it's junk? Is that based on your own critical analysis of the content, or just on what Retraction Watch has to say about Chemosphere?
Nobody gives a shit what you say so you might as well give us something fun to read.
You have a mistaken understanding of paper teabags. They are made of paper, but during manufacturing the paper bag is sprayed with plastic to finish it
(And no, I’m not talking about the silky plastic pyramid style ones. Just the cheap paper ones)
> To such end, three teabags of different chemical compositions were used in this study: (1) empty nylon-6 (NY6) teabags (as a model of polyamide), (2) empty polypropylene (PP) teabags, and (3) commercially available teabags containing tea, and cellulose as the polymer composition.
To me, that suggests there were bags included containing no PP or Nylon-6.
so 3-20% of the cellulose fiber could be hydrophobic additives
> In environments above 60°C, such as in hot liquids or high-heat exposure, PLA can begin to leach additives or degrade into its lactic acid monomers
Why the fuck are these sodding tic tacs putting 3D printer plastic into tea bags that will be thrown into boiling water?!
Top marks.
(Or is this a sarcastic response along the lines of "didn't you know it contains dihydrogen monoxide, a chemical widely used in nuclear reactors and military applications!"?)
Pretty sure this is benign. Apparently they use this polymer for medical implants, for a type designed to slowly dissolve:
Regardless the problem is not the plastic itself, but the plasticizers and other additives that leech out once you decompose it from what I understand. For medical use I would expect it's fairly stringent on what goes into it, but for something like tea bags I'm less sure.
PLA was around long before 3D printers became known to everyone under 30 years of age. It was first discovered in the 1920s by Wallace Carothers.
PLA has been around for a while, its not new with 3D printers, its just commonly used for 3D printers because it has excellent properties for 3D printing.
this is such garbage paper you are referencing, and in particular the claim "most paper tea bags contain unsettling amounts of bad plastics" screams for citations and testing method.
I guess the authors only took into consideration some bad quality local trash brand.
https://www.implasticfree.com/why-you-should-switch-to-plast...
> The tea bags used for the research were made from the polymers nylon-6, polypropylene and cellulose. The study shows that, when brewing tea, polypropylene releases approximately 1.2 billion particles per milliliter, with an average size of 136.7 nanometers; cellulose releases about 135 million particles per milliliter, with an average size of 244 nanometers; while nylon-6 releases 8.18 million particles per milliliter, with an average size of 138.4 nanometers.
> To such end, three teabags of different chemical compositions were used in this study: (1) empty nylon-6 (NY6) teabags (as a model of polyamide), (2) empty polypropylene (PP) teabags, and (3) commercially available teabags containing tea, and cellulose as the polymer composition.
The quote you provided explains clearly, they measured three different types of teabags, distinguished by the different material that each was made of. "three teabags of different chemical compositions"
Edit: to indicate agreement
Anyway, it comes across like they're trying to warn about nylon or polypropylene being unexpectedly found in disposable tea bags that appear to be made of paper; but in the details you read that the microplastics are "derived from several types of commercially available tea bags" - a category which certainly includes bags very openly and obviously made of nylon (reusable, pyramid-shaped ones). There are tons of places reporting on this new study, but the idea doesn't seem to be new at all. (It also seems like common sense to me that immersing a fine plastic mesh in your food, and allowing it to reach close to 100 degrees Celsius, might be a risk for this sort of thing.) It wasn't new in 2019, either: see e.g. https://ratetea.com/topic/nylon-tea-bags/30/ .
But then, a bit of searching suggests that the disposable paper bags may indeed contain a significant amount of plastic (see e.g. https://pmc.ncbi.nlm.nih.gov/articles/PMC10389239/ , although the tone of the writing here seems rather fear-mongering). The reporting would be much better if it made this sort of thing clear.
https://www.implasticfree.com/why-you-should-switch-to-plast...
When I boil some vegetables, do they leach microplastics into the cooking liquid, or is that something different from what this study is describing?
(Edit: on looking to the study itself, it seems like this was more about developing a methodology than asserting anything in particular about the paper teabag, which they described as a random pick stripped from some green teabags from the store.
Specifically I didn’t understand it to suggest that synthetic microplastics had gotten bound up in the paper matrix somehow and THAT was what was being released… so maybe it was, after all, just “model intestines absorb cellulose but not super well.”
Maybe practitioners would understand the cellulose results to be used like a control here?
https://www.sciencedirect.com/science/article/pii/S004565352... )