News for hackers. Stuff that matters.
Re:How I Replaced Deadly Garage Door Torsion Springs by the__alchemist on Monday March 18, 2024 @12:59PM (#39746954)
Thank you. I agree on all examples. Absolutely not worth the risk. Not even close. I wince thinking about when I changed my own oil in my 20s... Potentially throwing away so many good years, for so little gain. The car danger can be mitigated if the work is done under a professional lift.
Re:How I Replaced Deadly Garage Door Torsion Springs by cityofdelusion on Monday March 18, 2024 @01:15PM (#39747098)
There is pretty much zero risk if the car is either jacked correctly or put on ramps correctly. Dummies that rely on a single 1.5mm o-ring not blowing out on their hydraulic floor jacks are gambling with their life. Always operate on flat terrain, always chock the wheels, always use the parking brake, always use jack stands, always verify no movement in the vehicle by rocking it, never rely on the floor jack.
Re:How I Replaced Deadly Garage Door Torsion Springs by rpmisms on Monday March 18, 2024 @01:17PM (#39747119)
Ramps are very good. I don't know why anyone would use a jack for an oil change...
Re:How I Replaced Deadly Garage Door Torsion Springs by jtriangle on Monday March 18, 2024 @01:27PM (#39747252)
A jack is basically suicide tbh. Jackstands are fine, provided they're used correctly.

Ramps are nice, provided you don't need to take a wheel off, then you're using jackstands anyway, so, if you're buying one or the other, jackstands are a good option.

Personally, if you have the space for it, a trench is the best option, I had one previously and I miss it alot. Nothing leaves the ground, car just pulls in and is ready to go. Mine was like 2ft deep, so, maybe a little cramped, but very comfortable once you're in there working. You couldn't make a standable trench at home without engineering it anyway, so, a crawlable trench is really the way to go.

Re:How I Replaced Deadly Garage Door Torsion Springs by the__alchemist on Monday March 18, 2024 @04:46PM (#39749797)
IMO a trench mitigates the danger effectively.
Re:How I Replaced Deadly Garage Door Torsion Springs by darkr on Monday March 18, 2024 @06:01PM (#39750571)
Until you fall into it when you’re not paying attention!
Re:How I Replaced Deadly Garage Door Torsion Springs by thimkerbell on Monday March 18, 2024 @07:26PM (#39751292)
But fumes can collect in a trench, is that right?
Re:How I Replaced Deadly Garage Door Torsion Springs by Arrath on Monday March 18, 2024 @06:08PM (#39750660)
Make sure it is shored correctly!
Re:How I Replaced Deadly Garage Door Torsion Springs by WalterBright on Monday March 18, 2024 @09:10PM (#39751977)
They're against the building code around here.
Re:How I Replaced Deadly Garage Door Torsion Springs by darkr on Monday March 18, 2024 @06:05PM (#39750622)
Another option, if you’ve got the ceiling height is a proper 4 post lift. Expensive, but you can justify it by doubling your car storage space.
Re:How I Replaced Deadly Garage Door Torsion Springs by dylan604 on Monday March 18, 2024 @05:33PM (#39750322)
Depends on the jack. The people I know that do this use a jack and jack stands rather than just a jack. The jack is just the tool to go up/down.
Re:How I Replaced Deadly Garage Door Torsion Springs by shiroiushi on Monday March 18, 2024 @10:24PM (#39752353)
>The jack is just the tool to go up/down.

This should be drilled into the heads of anyone who touches a jack. It's only a tool for lifting the car onto jackstands.

Re:How I Replaced Deadly Garage Door Torsion Springs by class3shock on Monday March 18, 2024 @08:46PM (#39751831)
Lazyness. I've been under a car dozens of times with them, never had an issue, but know it's not the best practice and try to use jackstands... but it's just so much quicker!
Re:How I Replaced Deadly Garage Door Torsion Springs by the__alchemist on Monday March 18, 2024 @01:23PM (#39747198)
Valid, re ramps > jack stands > floor jack. I always used ramps, but still... won't do it again. I'll change plugs + coils etc because you don't need to get under the car.
Re:How I Replaced Deadly Garage Door Torsion Springs by Scoundreller on Monday March 18, 2024 @01:36PM (#39747376)
I’ll also put tires (on rims) underneath in addition to jack stands/ramps.
Re:How I Replaced Deadly Garage Door Torsion Springs by cruffle_duffle on Monday March 18, 2024 @08:31PM (#39751725)
It’s amazing and honestly kind of sad how risk averse some people are. The reason I don’t change my oil anymore is it just isn’t worth the time and hassle. The “unsafety” of such a task doesn’t even register on my things to be worried about: at all. Jack it up, remember to put on gloves(!!!!) put the fucker on stands and go.

The actual scary thing is I’m pretty sure way back when I was a kid we’d just dump the oil down the storm drain. I hate to think what that was doing to the environment around us.

Re:How I Replaced Deadly Garage Door Torsion Springs by BenFranklin100 on Monday March 18, 2024 @11:26PM (#39752656)
I’m baffled too. Changing oil in a car is dead simple and effectively zero risk with a proper pair of jack stands and a modicum of common sense and mechanical aptitude.
Re:How I Replaced Deadly Garage Door Torsion Springs by ryanjshaw on Tuesday March 19, 2024 @03:05AM (#39753536)
Not everyone is born with common sense. I sure wasn't. I'll find some way to do something that will leave the people with common sense scratching their heads, saying "but why wouldn't you just...".
Re:How I Replaced Deadly Garage Door Torsion Springs by outop on Tuesday March 19, 2024 @04:47AM (#39753913)
There's a kind of meta-common sense which allows people to say "I don't have the ability to perform this task reliably".
Re:How I Replaced Deadly Garage Door Torsion Springs by BenFranklin100 on Tuesday March 19, 2024 @04:02PM (#39759704)
All right, I respect that. I’m sure there are plenty of things that I might do that would leave you scratching your head too.
Re:How I Replaced Deadly Garage Door Torsion Springs by shawabawa3 on Tuesday March 19, 2024 @07:12AM (#39754599)
Of course it's safe if you jack it correctly

The problem is if you've only used a jack 0-1 times in your life, you won't know you haven't done it correctly until there's a car crushing you

Re:How I Replaced Deadly Garage Door Torsion Springs by Der_Einzige on Tuesday March 19, 2024 @03:10PM (#39759178)
Harbor freight famously sold unreliable jackstands for awhile. There’s memes about it in the car community.
Re:How I Replaced Deadly Garage Door Torsion Springs by hagbard_c on Tuesday March 19, 2024 @04:45PM (#39760028)
There's plenty of unreliable jack stands, especially the folding tripod-type is easily toppled. I still use these but I put a few LECA-blocks and/or stacks of lumber under the edges of the car to catch it in case the jack stands fail. This never happened but I prefer not to end up a statistic of the ´man found dead under car on farm' type.
Re:How I Replaced Deadly Garage Door Torsion Springs by giantg2 on Monday March 18, 2024 @01:19PM (#39747138)
"Potentially throwing away so many good years, for so little gain. The car danger can be mitigated if the work is done under a professional lift."

I use ramps I built - solid 2x12. Those are extremely safe as there's nothing that can break, bend, or disintegrate. It's way more dangerous to drive than to work on the vehicle.

Re:How I Replaced Deadly Garage Door Torsion Springs by YeBanKo on Monday March 18, 2024 @05:21PM (#39750187)
> Potentially throwing away so many good years

How much time did you spend changing oil?? It's a 20-30 min job once you have done it coupe of time and know the ropes. I sometimes do it myself not because I want to save few bucks, but because it's sometimes faster than going somewhere.

Re:How I Replaced Deadly Garage Door Torsion Springs by sokoloff on Monday March 18, 2024 @05:45PM (#39750434)
I read that as "I risked 50+ remaining years of my life (or serious life-changing injury) with low-probability" not "it took me so many wasted hours with probability 1.0"
Re:How I Replaced Deadly Garage Door Torsion Springs by dylan604 on Monday March 18, 2024 @05:32PM (#39750311)
I'm assuming you're leaving out the time it takes to drive somewhere to dispose of the used oil and driving back. I grew up in the boonies, and my dad was one to dispose of oil "out back". It was such a shock the day he brought home a proper catch can to have it disposed of properly
Re:How I Replaced Deadly Garage Door Torsion Springs by gnicholas on Monday March 18, 2024 @08:31PM (#39751721)
We just put it out with the weekly recycling.
Re:How I Replaced Deadly Garage Door Torsion Springs by giobox on Monday March 18, 2024 @07:10PM (#39751153)
This isn't that bad for most people living in the US, given every major auto part chain in the country accepts the fluids for free (o'reilly, autozone, etc). There's often an auto parts store next to the supermarket or close by. Besides, for most cars we are talking about a once every 12-24 month event for only ~5 quarts of old fluid.

You can show up with the used oil in any receptacle you like, there's no such thing as a proper container beyond not leaking, they will take the contents off your hands.

Re:How I Replaced Deadly Garage Door Torsion Springs by dylan604 on Monday March 18, 2024 @07:26PM (#39751295)
there's a caveat to "most people living in the US" regarding what their lease/deed/HOA contracts/etc say restricting the working on one's car on premises. you'd be amazed at how restrictive they can be. in an apartment, you'll be lucky if they allow you to jack up your car to change a tire. opening the hood for anything more than adding fluids is also a no-no. even single family homes with strict HOAs do not want a car in the front drive actively being worked on (sometimes that comes with "for extended period" caveats, but not always). I gues they figure if you can afford to live there, you can afford to have someone else work on your car at their place not in their neighborhood.
Re:How I Replaced Deadly Garage Door Torsion Springs by sokoloff on Monday March 18, 2024 @07:50PM (#39751462)
"Don't buy in an HOA if you like to use your hands" is probably pretty fair advice.

HOAs serve a pretty useful purpose: to coarsely/imperfectly segregate people who want to live in an HOA away from people who would never want to live in an HOA and vice-versa.

Those two groups are somewhat prone to having conflicts with each other and HOAs let both be happier than if they were to be annoyed by living next to each other.

Re:How I Replaced Deadly Garage Door Torsion Springs by YeBanKo on Monday March 18, 2024 @06:01PM (#39750582)
Pretty much any big chain auto parts shop accepts used oil. With a proper catch can you still have to bring in for disposal.
Re:How I Replaced Deadly Garage Door Torsion Springs by sokoloff on Monday March 18, 2024 @05:43PM (#39750418)
I do my oil changes top-side now, using an air-powered Mityvac (MV7300; no affiliation).

That's the factory-recommended procedure for several brands now and works well on my Mercedes and Honda. I was skeptical at first, but did the extraction and then removed the drain plug and the oil I got from the bottom wouldn't have half-filled a shot glass, so that's good enough for me.

As long as the filter is accessible from the top or side, I don't see the need to jack up most wet-sump cars (which is almost all of them).

Re:How I Replaced Deadly Garage Door Torsion Springs by robocat on Monday March 18, 2024 @07:29PM (#39751321)
Thanks for the oil change recommendation.

Video review that seemed legit if anyone interested: https://m.youtube.com/watch?v=xuYVe-mPsxw

Re:How I Replaced Deadly Garage Door Torsion Springs by sokoloff on Monday March 18, 2024 @07:48PM (#39751450)
That seems like a fair review. The only things I've needed to do in about a decade was to replace the nylon hose (readily available from many suppliers and therefore cheap). It cracked after a half-decade of sitting outside with corrosive used oil sitting it. I also got a somewhat longer piece so I could have the tool sitting firmly on the ground and still reach the bottom of the sump. It seems like they could have given an extra couple feet without breaking the bank.

One thing to note: you'll need about 5 CFM @ 90 psi to run the venturi, which is more than a little pancake compressor can give, but otherwise isn't crazy for even a medium portable compressor. If you don't have an air compressor and weren't planning to get one, I think they probably make a powered pump version and that would be a better choice.

Re:How I Replaced Deadly Garage Door Torsion Springs by cnasc on Monday March 18, 2024 @05:59PM (#39750562)
Recently got one of these myself. Didn’t even get my hands dirty doing the change, wish I knew about fluid extractors years ago (though not all of my cars have had filters so easily accessible)
Re:How I Replaced Deadly Garage Door Torsion Springs by porkbeer on Tuesday March 19, 2024 @01:16AM (#39753159)
NOt all crankcases can be drained fully this way. Please test using the drain plug the first few times. Budfy locked up his benz with this shortcut.
Re:How I Replaced Deadly Garage Door Torsion Springs by supportengineer on Monday March 18, 2024 @06:09PM (#39750667)
I started changing my own oil when I was 16. We only used ramps, never jacks.
Re:How I Replaced Deadly Garage Door Torsion Springs by paradox460 on Monday March 18, 2024 @11:48PM (#39752768)
I bought an oil/fluid extractor off Amazon. It's basically a bicycle pump sized tank, with a long hose you stuff down the dipstick hole. You then pump the unit up, which creates a vacuum, and pulls the oil up and out of the car. Takes about 5 minutes to get 5 quarts out, and then you just refill, pour the used oil into the now empty bottles the new oil came in, and take it to your oil recycling center