Re:How I Replaced Deadly Garage Door Torsion Springs
by rpmisms on Monday March 18, 2024 @01:17PM
(#39747119)
Ramps are very good. I don't know why anyone would use a jack for an oil change...
[ Parent
| on HN ]
Re:How I Replaced Deadly Garage Door Torsion Springs
by jtriangle on Monday March 18, 2024 @01:27PM
(#39747252)
A jack is basically suicide tbh. Jackstands are fine, provided they're used correctly.
Ramps are nice, provided you don't need to take a wheel off, then you're using jackstands anyway, so, if you're buying one or the other, jackstands are a good option.
Personally, if you have the space for it, a trench is the best option, I had one previously and I miss it alot. Nothing leaves the ground, car just pulls in and is ready to go. Mine was like 2ft deep, so, maybe a little cramped, but very comfortable once you're in there working. You couldn't make a standable trench at home without engineering it anyway, so, a crawlable trench is really the way to go.
Re:How I Replaced Deadly Garage Door Torsion Springs
by the__alchemist on Monday March 18, 2024 @04:46PM
(#39749797)
IMO a trench mitigates the danger effectively.
Re:How I Replaced Deadly Garage Door Torsion Springs
by darkr on Monday March 18, 2024 @06:01PM
(#39750571)
Until you fall into it when you’re not paying attention!
Re:How I Replaced Deadly Garage Door Torsion Springs
by thimkerbell on Monday March 18, 2024 @07:26PM
(#39751292)
But fumes can collect in a trench, is that right?
Re:How I Replaced Deadly Garage Door Torsion Springs
by Arrath on Monday March 18, 2024 @06:08PM
(#39750660)
Make sure it is shored correctly!
Re:How I Replaced Deadly Garage Door Torsion Springs
by WalterBright on Monday March 18, 2024 @09:10PM
(#39751977)
They're against the building code around here.
Re:How I Replaced Deadly Garage Door Torsion Springs
by darkr on Monday March 18, 2024 @06:05PM
(#39750622)
Another option, if you’ve got the ceiling height is a proper 4 post lift. Expensive, but you can justify it by doubling your car storage space.
Re:How I Replaced Deadly Garage Door Torsion Springs
by dylan604 on Monday March 18, 2024 @05:33PM
(#39750322)
Depends on the jack. The people I know that do this use a jack and jack stands rather than just a jack. The jack is just the tool to go up/down.
Re:How I Replaced Deadly Garage Door Torsion Springs
by shiroiushi on Monday March 18, 2024 @10:24PM
(#39752353)
>The jack is just the tool to go up/down.
This should be drilled into the heads of anyone who touches a jack. It's only a tool for lifting the car onto jackstands.
Re:How I Replaced Deadly Garage Door Torsion Springs
by class3shock on Monday March 18, 2024 @08:46PM
(#39751831)
Lazyness. I've been under a car dozens of times with them, never had an issue, but know it's not the best practice and try to use jackstands... but it's just so much quicker!