Re:How I Replaced Deadly Garage Door Torsion Springs
by robocat on Monday March 18, 2024 @07:29PM
(#39751321)
Thanks for the oil change recommendation.
Video review that seemed legit if anyone interested: https://m.youtube.com/watch?v=xuYVe-mPsxw
Re:How I Replaced Deadly Garage Door Torsion Springs
by sokoloff on Monday March 18, 2024 @07:48PM
(#39751450)
That seems like a fair review. The only things I've needed to do in about a decade was to replace the nylon hose (readily available from many suppliers and therefore cheap). It cracked after a half-decade of sitting outside with corrosive used oil sitting it. I also got a somewhat longer piece so I could have the tool sitting firmly on the ground and still reach the bottom of the sump. It seems like they could have given an extra couple feet without breaking the bank.
One thing to note: you'll need about 5 CFM @ 90 psi to run the venturi, which is more than a little pancake compressor can give, but otherwise isn't crazy for even a medium portable compressor. If you don't have an air compressor and weren't planning to get one, I think they probably make a powered pump version and that would be a better choice.
Re:How I Replaced Deadly Garage Door Torsion Springs
by cnasc on Monday March 18, 2024 @05:59PM
(#39750562)
Recently got one of these myself. Didn’t even get my hands dirty doing the change, wish I knew about fluid extractors years ago (though not all of my cars have had filters so easily accessible)
That's the factory-recommended procedure for several brands now and works well on my Mercedes and Honda. I was skeptical at first, but did the extraction and then removed the drain plug and the oil I got from the bottom wouldn't have half-filled a shot glass, so that's good enough for me.
As long as the filter is accessible from the top or side, I don't see the need to jack up most wet-sump cars (which is almost all of them).