News for hackers. Stuff that matters.
Re:How I Replaced Deadly Garage Door Torsion Springs by cityofdelusion on Monday March 18, 2024 @01:15PM (#39747098)
There is pretty much zero risk if the car is either jacked correctly or put on ramps correctly. Dummies that rely on a single 1.5mm o-ring not blowing out on their hydraulic floor jacks are gambling with their life. Always operate on flat terrain, always chock the wheels, always use the parking brake, always use jack stands, always verify no movement in the vehicle by rocking it, never rely on the floor jack.
Re:How I Replaced Deadly Garage Door Torsion Springs by rpmisms on Monday March 18, 2024 @01:17PM (#39747119)
Ramps are very good. I don't know why anyone would use a jack for an oil change...
Re:How I Replaced Deadly Garage Door Torsion Springs by jtriangle on Monday March 18, 2024 @01:27PM (#39747252)
A jack is basically suicide tbh. Jackstands are fine, provided they're used correctly.

Ramps are nice, provided you don't need to take a wheel off, then you're using jackstands anyway, so, if you're buying one or the other, jackstands are a good option.

Personally, if you have the space for it, a trench is the best option, I had one previously and I miss it alot. Nothing leaves the ground, car just pulls in and is ready to go. Mine was like 2ft deep, so, maybe a little cramped, but very comfortable once you're in there working. You couldn't make a standable trench at home without engineering it anyway, so, a crawlable trench is really the way to go.

Re:How I Replaced Deadly Garage Door Torsion Springs by the__alchemist on Monday March 18, 2024 @04:46PM (#39749797)
IMO a trench mitigates the danger effectively.
Re:How I Replaced Deadly Garage Door Torsion Springs by darkr on Monday March 18, 2024 @06:01PM (#39750571)
Until you fall into it when you’re not paying attention!
Re:How I Replaced Deadly Garage Door Torsion Springs by thimkerbell on Monday March 18, 2024 @07:26PM (#39751292)
But fumes can collect in a trench, is that right?
Re:How I Replaced Deadly Garage Door Torsion Springs by Arrath on Monday March 18, 2024 @06:08PM (#39750660)
Make sure it is shored correctly!
Re:How I Replaced Deadly Garage Door Torsion Springs by WalterBright on Monday March 18, 2024 @09:10PM (#39751977)
They're against the building code around here.
Re:How I Replaced Deadly Garage Door Torsion Springs by darkr on Monday March 18, 2024 @06:05PM (#39750622)
Another option, if you’ve got the ceiling height is a proper 4 post lift. Expensive, but you can justify it by doubling your car storage space.
Re:How I Replaced Deadly Garage Door Torsion Springs by dylan604 on Monday March 18, 2024 @05:33PM (#39750322)
Depends on the jack. The people I know that do this use a jack and jack stands rather than just a jack. The jack is just the tool to go up/down.
Re:How I Replaced Deadly Garage Door Torsion Springs by shiroiushi on Monday March 18, 2024 @10:24PM (#39752353)
>The jack is just the tool to go up/down.

This should be drilled into the heads of anyone who touches a jack. It's only a tool for lifting the car onto jackstands.

Re:How I Replaced Deadly Garage Door Torsion Springs by class3shock on Monday March 18, 2024 @08:46PM (#39751831)
Lazyness. I've been under a car dozens of times with them, never had an issue, but know it's not the best practice and try to use jackstands... but it's just so much quicker!
Re:How I Replaced Deadly Garage Door Torsion Springs by the__alchemist on Monday March 18, 2024 @01:23PM (#39747198)
Valid, re ramps > jack stands > floor jack. I always used ramps, but still... won't do it again. I'll change plugs + coils etc because you don't need to get under the car.
Re:How I Replaced Deadly Garage Door Torsion Springs by Scoundreller on Monday March 18, 2024 @01:36PM (#39747376)
I’ll also put tires (on rims) underneath in addition to jack stands/ramps.
Re:How I Replaced Deadly Garage Door Torsion Springs by cruffle_duffle on Monday March 18, 2024 @08:31PM (#39751725)
It’s amazing and honestly kind of sad how risk averse some people are. The reason I don’t change my oil anymore is it just isn’t worth the time and hassle. The “unsafety” of such a task doesn’t even register on my things to be worried about: at all. Jack it up, remember to put on gloves(!!!!) put the fucker on stands and go.

The actual scary thing is I’m pretty sure way back when I was a kid we’d just dump the oil down the storm drain. I hate to think what that was doing to the environment around us.

Re:How I Replaced Deadly Garage Door Torsion Springs by BenFranklin100 on Monday March 18, 2024 @11:26PM (#39752656)
I’m baffled too. Changing oil in a car is dead simple and effectively zero risk with a proper pair of jack stands and a modicum of common sense and mechanical aptitude.
Re:How I Replaced Deadly Garage Door Torsion Springs by ryanjshaw on Tuesday March 19, 2024 @03:05AM (#39753536)
Not everyone is born with common sense. I sure wasn't. I'll find some way to do something that will leave the people with common sense scratching their heads, saying "but why wouldn't you just...".
Re:How I Replaced Deadly Garage Door Torsion Springs by outop on Tuesday March 19, 2024 @04:47AM (#39753913)
There's a kind of meta-common sense which allows people to say "I don't have the ability to perform this task reliably".
Re:How I Replaced Deadly Garage Door Torsion Springs by BenFranklin100 on Tuesday March 19, 2024 @04:02PM (#39759704)
All right, I respect that. I’m sure there are plenty of things that I might do that would leave you scratching your head too.
Re:How I Replaced Deadly Garage Door Torsion Springs by shawabawa3 on Tuesday March 19, 2024 @07:12AM (#39754599)
Of course it's safe if you jack it correctly

The problem is if you've only used a jack 0-1 times in your life, you won't know you haven't done it correctly until there's a car crushing you

Re:How I Replaced Deadly Garage Door Torsion Springs by Der_Einzige on Tuesday March 19, 2024 @03:10PM (#39759178)
Harbor freight famously sold unreliable jackstands for awhile. There’s memes about it in the car community.
Re:How I Replaced Deadly Garage Door Torsion Springs by hagbard_c on Tuesday March 19, 2024 @04:45PM (#39760028)
There's plenty of unreliable jack stands, especially the folding tripod-type is easily toppled. I still use these but I put a few LECA-blocks and/or stacks of lumber under the edges of the car to catch it in case the jack stands fail. This never happened but I prefer not to end up a statistic of the ´man found dead under car on farm' type.