News for hackers. Stuff that matters.
Re:Microwaved plastic containers release microplastics into ... by danielbln on Friday June 30, 2023 @08:06AM (#36533418)
As a daily Aeropress user, I wonder if I should maybe switch to something else. Thoughts?
Re:Microwaved plastic containers release microplastics into ... by dangson on Friday June 30, 2023 @08:35AM (#36533758)
Aeropress will be releasing a premium version made out of glass later this year.

https://coffeechronicler.com/aeropress-xl-premium/

Re:Microwaved plastic containers release microplastics into ... by christophilus on Friday June 30, 2023 @08:36AM (#36533773)
Swank. This is what I've been waiting for. The plastic is my only beef with the Aeropress.
Re:Microwaved plastic containers release microplastics into ... by nsbk on Friday June 30, 2023 @11:11AM (#36536299)
Same here! I only drink from stainless steel food safe bottles and store/heat food in glass containers. The Aeropress is the only food-related plastic thing I can't get rid of, until now.

I'll take the risk.

Re:Microwaved plastic containers release microplastics into ... by falsenapkin on Friday June 30, 2023 @10:17AM (#36535367)
Terrifying honestly, my aeropress experiences have always concerned me with if the mug can support the force. I know there isn't supposed to be a lot of force but I've used a few of these brewers and my experience is they're not super consistent! Hopefully glass is easier. I knew a barista who had a mug explode while using an aeropress, now imagine the brewer is itself glass as well during an event like that.
Re:Microwaved plastic containers release microplastics into ... by elif on Friday June 30, 2023 @10:40AM (#36535719)
Glass may impart more force upon the mug but it is certainly not likely to break itself. You would have to imagine they will use thick pyrex which you could use to drive a nail.
Re:Microwaved plastic containers release microplastics into ... by hinkley on Friday June 30, 2023 @10:46AM (#36535828)
Pyrex won't save you from shattering a cylinder in your hand. And this is the 2020's. You won't imagine how dumb companies can be. Check.

If this is the guy:

https://coffeechronicler.com/aeropress-xl-premium/

Then the fact that the inner cylinder is stainless steel means that if the glass shatters, you still have something supporting your hand. The inner cylinder might save you from life-altering lacerations to your hand. Might.

I'm not going to be the one to trust it. I've seen how much pressure people apply to aeropresses, and friends don't let friends push that hard on future shards of glass.

Re:Microwaved plastic containers release microplastics into ... by falsenapkin on Friday June 30, 2023 @11:05AM (#36536183)
Yeah I'm less concerned about the brewer breaking under normal use, I imagine they've done due diligence there (though personally I would wait a year or so) but I'm more concerned if the mug shatters and then you have all this force shoving the brewer into the counter next is that enough to break it? Especially as the it hits a granite counter at a weird angle maybe with the flange or filter cap instead of the perfect circle of a mug on the normal mouth surface.
Re:Microwaved plastic containers release microplastics into ... by hinkley on Friday June 30, 2023 @10:44AM (#36535787)
I helped a guy pick out cycling gloves one time when I was a mechanic. The palm of one of his hands was a wreck. I don't know if I pried or he volunteered it:

Slashed the hell out of his hand trying to push a stopper into lab glass. It broke and momentum carried his hand into the glass.

You might get lucky if a cylinder of glass breaks across the diameter in your hand. You will not get lucky if it breaks lengthwise under your hand.

Re:Microwaved plastic containers release microplastics into ... by falsenapkin on Friday June 30, 2023 @11:11AM (#36536308)
Oh that is awful! Total tangent but I started doing group rides again recently and am surprised by how few people wear gloves. After my first fall tearing up my hands I decided I would not let that happen again. And since then, it's really nice when going down not having to plan for where/how the hands land! This past ride someone went down on some really awful shoulder debris and luckily her hands were fine but man gloves are like $20...
Re:Microwaved plastic containers release microplastics into ... by hinkley on Friday June 30, 2023 @11:19AM (#36536516)
If you're falling a lot you should think about some bike handling exercises. Low speed maneuvers will likely help. And when you hit rough ground, relax. Twitching the bike while in gravel will just make you go down faster. Just relax, hold on and pray for traction to improve before you reach the point of no return. I've avoided my worst accidents that way. One in particular flummoxed the guy I was riding with. He didn't say anything for a full minute after. That was, uh, quite a recovery (If I'd gone down it would have been a five man pile-up, probably with him at the front of it).

I haven't ridden seriously for years but my partner thinks I'm crazy for driving one handed. I had lots of practice doing low-speed maneuvers one-handed (end of the ride, it's hot, I'm thirsty). I could emergency brake one handed (once dual pivot brakes existed) For a brief moment I could do a track stand one handed. Driving one handed I'm more stable than most people are with two (also, grew up driving stick, so one-handed is de facto if not de rigeur).

I don't know if they still do this, but pros used to wear silk shirts under their jerseys to reduce road rash (source: Phil Liggett). I suspect any current gen synthetic sports undershirt (under armor, Kuhl, DSG, etc) would do. Two smooth layers of clothing will spin past each other instead of gouging you.

Re:Microwaved plastic containers release microplastics into ... by falsenapkin on Friday June 30, 2023 @01:47PM (#36539197)
I'm plenty capable I mean I've had like 4 or 5 unexpected ground falls in 20 years. Hung over rushing to class no hands trying to put a water bottle in my back pocket, someone stepped out from behind an on trail overhead bridge support column, braked hard for someone doing something unexpected and illegal while I was riding downhill on cobblestone. Shit happens, lessons to be learned in every case but protected hands always welcome.

I've never fallen no-handed but it was nice having gloves while developing that skill too ;)

Re:Microwaved plastic containers release microplastics into ... by hinkley on Friday June 30, 2023 @02:15PM (#36539657)
Man college campuses are a warzone for bicycles.

I watched two guys riding too fast through pedestrians hit so hard one guy lost five spokes. And one day some guy coming the opposite way from me on the bike path suddenly started flipping end over end (I think his chain fell into his front wheel but I, too, was late for class so I checked for concussion and fucked off). I just managed to squeak past him but if it had happened twenty milliseconds earlier I would have been part of his drama.

After those two incidents I decided I was safer in the street. Fuckin college kids man.

Re:Microwaved plastic containers release microplastics into ... by falsenapkin on Friday June 30, 2023 @02:38PM (#36540036)
I regret to admit I was a bit faster than I should have been and probably caused some heart palpitations. I'm 30+ now and shaking my fist at the local college kids.

Worst crash I had was a header when I was like 15, mechanical failure (I was learning to "fix" my own). Fortunately adolescent invincibility and a chin first impact allowed me to avoid serious harm, but I took helmets seriously after that too!

Re:Microwaved plastic containers release microplastics into ... by grecy on Friday June 30, 2023 @11:00AM (#36536080)
I've broken a few coffee mugs by pushing too hard on an aeropress while it's on the kitchen bench
Re:Microwaved plastic containers release microplastics into ... by falsenapkin on Friday June 30, 2023 @11:15AM (#36536399)
Sounds like an awful morning even if you get away injury free. I'll only use it on my beefiest mugs with walls straight vertical from mouth to counter. Watching people use one on a dainty mug with weird surface geometry and more of a cup shape gets me squirming in a hurry.
Re:Microwaved plastic containers release microplastics into ... by criddell on Friday June 30, 2023 @11:06AM (#36536208)
I was thinking you could probably machine metal to fine enough tolerances to make an all metal Aeropress but I don't know how you can do this with glass. How do you get a good seal around a glass plunger?
Re:Microwaved plastic containers release microplastics into ... by tornadron on Friday June 30, 2023 @12:52PM (#36538274)
It will be made out of Tritan -- a type of plastic, not glass.
Re:Microwaved plastic containers release microplastics into ... by mikestew on Friday June 30, 2023 @03:02PM (#36540413)
The Aeropress Clear is made out of Tritan. The Premium (from the link) "will feature a construction of glass, stainless steel, and aluminum instead of the usual plastic."
Re:Microwaved plastic containers release microplastics into ... by tornadron on Friday June 30, 2023 @06:49PM (#36543582)
Ah missed that part my bad.
Re:Microwaved plastic containers release microplastics into ... by yetihehe on Friday June 30, 2023 @08:15AM (#36533506)
As aeropress user for many years, I don't think there's noticeable amount of microplastics coming from it, paper filter would also help with filtering out ANY debris. But, now microplastics are even in air you breathe, coming from anyone using artifical fibers near you.
Re:Microwaved plastic containers release microplastics into ... by swsieber on Friday June 30, 2023 @08:20AM (#36533574)
> As aeropress user for many years, I don't think there's noticeable amount of microplastics coming from it

How does one notice microplastics? Do you notice microplastics from anything?

Re:Microwaved plastic containers release microplastics into ... by robinduckett on Friday June 30, 2023 @08:51AM (#36533957)
He clearly meticulously inspects each brew with a scanning electron microscope. Listen, there is a certain level that coffeeheads get to…
Re:Microwaved plastic containers release microplastics into ... by joecool1029 on Friday June 30, 2023 @09:31AM (#36534551)
I think maybe microwaving the aeropress is a bad idea for microplastic concern, but using near boiling water from a kettle in them may not be as bad. Less local heating and no potential to have any parts climb over boiling point.
Re:Microwaved plastic containers release microplastics into ... by yetihehe on Friday June 30, 2023 @09:32AM (#36534568)
It's about how much microplastics is too much. After two years of use, I don't see a lot of plastic being eaten away comparing to a new one, so I don't think it's much of a deal.
Re:Microwaved plastic containers release microplastics into ... by etrautmann on Friday June 30, 2023 @10:13AM (#36535288)
I think this discussion includes leeched chemicals like hormone disruptors, not only physical plastic particles.
Re:Microwaved plastic containers release microplastics into ... by Reubachi on Friday June 30, 2023 @12:10PM (#36537555)
When people discuss microplastics, they are not necessarily ever meaning "visible plastic", but rather chemical offgassing.
Re:Microwaved plastic containers release microplastics into ... by kelipso on Friday June 30, 2023 @08:49AM (#36533919)
I stopped using Aeropress years ago because of this. Hot liquids and plastic do not go well together. Switched to pourover and using a ceramic pourover cone, less effort and takes about the same time.
Re:Microwaved plastic containers release microplastics into ... by hinkley on Friday June 30, 2023 @11:00AM (#36536070)
I should look if that coffee dude on youtube ever did a video on making fast cold brew. Like can you use one of those protein shake balls and just agitate the grounds to get a regular dose of caffeine in five minutes instead of twelve hours?

Doesn't work for camping of course. Half the point of hot beverages and soup when camping is so you don't have an Oregon Trail-style misadventure.

I think it was just a couple years ago that I learned soup still often counts as hydration (obviously not so much if it's super salty). Another way to get sterilized water into your body, before public sanitation.

Re:Microwaved plastic containers release microplastics into ... by beznet on Friday June 30, 2023 @09:28AM (#36534494)
reads this comment as I drink coffee from an Aeropress
Re:Microwaved plastic containers release microplastics into ... by joecool1029 on Friday June 30, 2023 @09:28AM (#36534508)
Only the first 2 versions of aeropress had BPA in them (the clear/light blue). Lab testing showed they didn't leech? The smoke colored ones don't have BPA, and the newer more expensive clear ones are made of something else without the issue (not sure all of them are glass). Some people used polyester filters with the aeropress that probably leech tons of microplastics.

I use a glass chemex with paper filters pretty frequently for larger quantity, and a Cona vacuum pot which is 100% glass for special occasions. Oh and a crofton (from aldi) carafe with a stainless insert for making cold brew.

Re:Microwaved plastic containers release microplastics into ... by bdcravens on Friday June 30, 2023 @09:39AM (#36534695)
This issue is what led me to the Espro instead.
Re:Microwaved plastic containers release microplastics into ... by rcme on Friday June 30, 2023 @09:48AM (#36534850)
Switch to a Chemex.
Re:Microwaved plastic containers release microplastics into ... by JeremyNT on Friday June 30, 2023 @09:54AM (#36534948)
I use the Aeropress all the time and I've had this thought before as well.

You can perhaps mitigate the risk by making sure to brew at the "right" temperature (like 185F, not boiling). It is also possible to do cold brew in the Aeropress (even a much faster version of cold brew, where you use room temperature water and stir vigorously for a few minutes).

Re:Microwaved plastic containers release microplastics into ... by hinkley on Friday June 30, 2023 @11:02AM (#36536118)
I have a Hario single cup funnel that I bought for the express purpose of filtering the fines out of cold brew. The ring on the top fits perfectly into a Luminarc pitcher, like they were made to go together.

It's the ceramic model, so not very portable I'm afraid.

Re:Microwaved plastic containers release microplastics into ... by falsenapkin on Friday June 30, 2023 @10:26AM (#36535522)
Depends on how you brew and what features you like in the brewer.

If you're using it at home, can sacrifice a little more space, and are doing more of an immersion brew then maybe go for a Hario Switch or french press. The Switch looks a lot like a cone brewer but has a ball valve at the bottom. There is still a wee bit of plastic involved but less than aeropress. You can grind for and/or use filters designed for faster draw down, personally I use a cloth filter which is a bit of faff as you need to rinse it out and store it in the fridge in a cup of water. Paper filters on the switch, in my experience, lead to over extraction unless you grind coarse etc etc.

If again you're at home and are really more into the high extraction pseudo-espresso kinda cups and you have more counter space, mental space, and wallet space to give to coffee then maybe go for a Flair lever espresso.

If you're not at home I don't think you're finding something without plastic.

Re:Microwaved plastic containers release microplastics into ... by elif on Friday June 30, 2023 @10:38AM (#36535691)
Agree I replaced all coffee makers, vaporizers, etc that have plastic anywhere near heat. I also make sure that tea bags are paper only not those mesh plastic ones which ironically cost more. I even took the plastic utensil rack out of my dishwasher after reading that most dishwashers are heavily contaminated with microplastics that just get coated on your dishes.

It is pretty frustrating trying to go plastic-less even with just food products. The glass storage containers for instance all seem to have plastic lids and seals...

Re:Microwaved plastic containers release microplastics into ... by markdeloura on Friday June 30, 2023 @10:59AM (#36536060)
Starbucks cups are lined with plastic on the inside too aren't they? Mmmm tasty microplastics.
Re:Microwaved plastic containers release microplastics into ... by ledgerdev on Friday June 30, 2023 @11:17AM (#36536451)
Pretty much all paper cups, and all metal cans too are lined with plastic too.
Re:Microwaved plastic containers release microplastics into ... by o_m on Friday June 30, 2023 @11:00AM (#36536081)
I recommend getting a Hario V60 made of glass. It requires a bit more effort, but is easy to get right after you've done it a couple of times.
Re:Microwaved plastic containers release microplastics into ... by marban on Friday June 30, 2023 @11:02AM (#36536125)
+1. And trash the silicone wrapper right away.
Re:Microwaved plastic containers release microplastics into ... by ledgerdev on Friday June 30, 2023 @11:02AM (#36536124)
I quit aeropress for precisely this a couple years ago. Having tried many different methods, I've settled on using a stainless filter and brew into a measuring cup and let it settle out for a minute or 2. It's easy, and not worried about putting so much pressure on the rim of a mug with boiling liquid. Also have moved to smaller insulated glass cups rather than larger mugs, which would never work with aeropress, helps cut down on caffeine intake.
Re:Microwaved plastic containers release microplastics into ... by brainzap on Friday June 30, 2023 @01:57PM (#36539382)
I just accepted it that everytime I push down it will probably scrape some plastic into the drink