Does LTS support usually matter, if you're using the device for a stand-alone application such as a lighting controller or front-door camera?
I was assuming that e.g. the lighting controller would only have 3 modes of access enabled:
(1) USB commections
(2) wired ethernet during admin
(3) ZWave via a USB adapter
At the point the software is released it has (hopefully) no known security vulnerabilities, which is a reasonably secure situation to be in.
However, eventually some of them will become known, and that is not safe.
We, as an industry, are bad about pushing "every device that is on the internet needs to be as up to date as possible all the time" when it reality there is a lot of unimportant stuff on the internet.
It's like locks. I wouldn't secure my house with a bike lock, but it's fine for my bike. My bike is less full of important stuff.
At best, that means you're externalizing the costs, i.e. now your device is part of a botnet and becomes a problem for other people. But of course that assumes that it doesn't become a problem for you as well; a compromised device on your network is a great launching point for local attacks and a way to send illegal traffic out through your internet connection.
I have a couple Raspberry Pi Zeroes that monitor aquarium temperature. I keep them updated.
Meanwhile in reality, no one gives a f about the rPi you use for your Guinea pig feeder.
You might get 2¢ in about 40 years mining with my IoT light bulb. Good luck with that.
A pwned IOT lightbulb can be used to help DDOS sites. It can relay DDOS traffic, eating your own bandwidth. It can be constantly probing the other devices on your network looking for vulnerabilities, until it pwns something else and is able to slurp down your passwords and credit card numbers.
Are you seriously suggesting that having an actively malicious computing device inside your home network is no big deal?
https://medium.com/@brannondorsey/attacking-private-networks...
For the kernel, it is important that it protect against dangerous programs running on the system to keep them isolated.
Will this device be able to load any web page in one or two decades? It would likely be slow, but the impossibility would be a pure software limitation.
Because there are no schematics or data sheets posted on that page. Good luck bring up anything else on it…
For something intermittently used like a game box that might not matter. For IoT-focused hardware that is connected to the internet continuously by design where, say, a malformed TCP packet could cause a buffer overflow in the network stack that wiggles it's way into root code execution by chaining through a bunch of unpatched vulnerabilities on a "never updated again" system? That's a problem.
No matter how elegant you seem to be, you'll always be running like half a dozen versions in the wild.
For any large deployment that kind of work will be on your shoulders anyways. Stuffing in security updates or whatever to that isn't crazy
Unless you're saying you want multichannel overlapping upgrade schedules where you have some NxM cadence matrix to test and support (as in ssh x+/-{1,2,3} AND your software x+/-{1,2,3} etc).
I've had to make and manage automated test rigs for those types of deployment as well.
That's an entire room full of whatever machines your deploying and a full time job.
Anyways, this stuff is hard for the out in the wild devices. Putting security updates in a monolithic release package is really the easier way to go and at that point it's on you.
Few years ago, you built a weather station. Sadly, the weather backend you had was discontinued. You found a great new one, and it even comes with SDK and sample code! Sadly, the SDK requires python 3.8 or later. Does your device support it?
Few years ago, you built the home automation server. But recently, you got the set of remotely-controllable disco balls for each room which use FOOBAR protocol. Good news: Linux kernel supports FOOBAR protocol since 5.14. Bad news: your device kernel is much older.
Few years ago, you built the smart controller. You don't want to manage your infra, so you decided to go with AWS IOT, it is super each if you only have a few devices. But AWS announced they are dropping AWS IOT.. does your OS support newer system?
There are definitely cases when you set up the device once and never have to touch it again, but there are also a lot of networked things out there, and you often want to control them..
Second, embedded systems have reliability requirements. Something will not work and will need support and updating to fix. The big advantage of normal distribution is that somebody has probably already fixed it.
Third, devices get repurposed. My five year old Raspberry Pi has had multiple jobs, and when it is done running Home Assistant, I'll find some other use. Plus, with normal distribution, I can easily install the packages I need.
But we got of TVs that are now useless because originally they just needed to "display a simple web page" but:
* no new TLS support, near-everything dropped old TLS
* sites that did not, use CA that's not on the device's list
It is presented as a viable commercial product, but it actually is an old SoC with no ecosystem. If anything, it teaches people not to use this type of thing.
The only way it would not be e-waste is if it had a future, and it doesn't and that's why it's bad. At this price point there are so many community and commercial alternatives that do have an ecosystem and support it's just pointless and most likely an attempt to dump overstocked Rockchip parts. Even an ancient i.MX 6 is a better choice.
It's 4 years out of date at release, why would you want that for "learning and prototyping", let alone start a OEM device with soon unsupported software versions.
Who the fuck would though? If there’s any value an SBC vendor should be providing it is some amount of support for a reasonable length of time.
There’s a reason the RPi is sold the way it is.
I think it depends on what you want to do with it.
If you're building something that won't access the network, or will be isolated to the LAN, then it's fine.
Not everything needs or wants to be connected to the internet.
When I looked into (now deprecated) Jetson Nano I was surprised to find out there was no straightforward and documented way to build your own system and cross-compile for it. Is that because for many people using SBCs means doing everything on the target (e.g. compiling software), or am I missing something?
I’ve also tried Yocto and Buildroot and frankly they’re not that great. Yocto’s build system is so complicated it could take months to fit all your custom layers together to get a working image. Every vendor of every layer has their own conventions and you have to manage patch sets on top of patch sets to get some things working. Buildroot works better but still has a rigid vision for what an embedded Linux system looks like and how it fits together.
The beauty of Linux is that once you get to libc the interface is identical no matter what board you’re using so there’s no reason to build everything from source. And if you want something like Yocto you’d be better off building rpm or deb packages from a basic layer and then using eg multistrap to build a root filesystem.
> The UNIHIKER comes with a Linux operating system based on Debian and various built-in features, which will be upgraded from time to time.
... don't expect OS upgrades here. If you want to play with it for a while then put it away forever, go ahead and do it; but if you want to build something long-term, better find a different board.