To me it just feels good to wake up in a visually simple environment with things out of sight. It feels like magic, in a good way, to be surrounded by performant, reliable and useful technology but to be able to see almost none of it. And I have an automatic negative reaction to visual clutter or conspicuous machinery in my house.
I don't see anything wrong with your way of thinking. I can't easily change how I feel about it and I see no reason why either of us should have to.
Edit: this makes me think about sci-fi spaceships. Battlestar Galactica vs. the Heart of Gold from Hitchhiker's Guide. One has its conduits and controls run every which way and the other is minimalist to a fault. I like them both but would definitely prefer to wake up every morning in the latter!
My aesthetic requirements are basically zero (to the dismay of my partner indeed; we meet in the middle) but I do want to be able to practically use the apartment still.
Most interior doors have a gap between the bottom of the door and the top of the floor, and you can cable in the gap if you don't mind the look. If the threshold is carpetted, you can often squish the wire into the seam where the carpet meets the door frame.
You can get one, maybe two, runs into a room that way, so don't put your central switch in a room like that, and if you need more than one drop in a room, put a switch in the room.
I have made many such holes in door frames for passing Ethernet cables or TV coaxial cables.
When you do not want to touch the walls, such cables can be routed on the edges between walls and floor and they can be masked by a cover having the wall color, to be invisible, except where passing through a door frame.
At least in Europe where I live, I have not seen any walls through which you can make clean holes with high probability. Almost always there is some small damage, which must be repaired, e.g. by filling with plaster and/or repainting. In most cases you also need a percussion drill machine, not just a simple drill machine. Here most walls are made either of concrete or of bricks.
So at least in the kinds of walls that I have seen, passing a cable through a wall requires more time, more diverse skills and a larger set of tools and materials than passing a cable through a door frame, which requires only that you have and know how to handle a drill machine and a cable crimping tool.
While common outside the US, most of it in newer constructions tends to be light concrete which is trivial to drill. But even 40MPa concrete is fine with an SDS, rent one if you don't wish to spend money on. In short drilling through outer walls is not difficult either.
Also, I would say writing bad code makes the code very inaccessible...just like burying important infrastructure in a wall.
Did that water leak last year cause mild growth in the wall? Don't know without some demolition! Want to upgrade your piping or electrical? Gotta destroy some wall, hooray, and then do more work to hide it again. Lunacy.
One of the apartments I looked at recently had this really annoying buzz in the kitchen, turned out it was a transformer that the previous owner plastered in. Definitely a big minus for me.
In my current apartment all cabling and piping is outside the walls because it was built before electricity was everywhere and I find it really handy <3. If the look bothers you it's not for you obviously but I don't think it's inherently worse.
Good code also doesn't need to "look pretty", it needs to be correct, and maintainable. Preferably maintainable by a less skilled developer with less domain knowledge. Following that logic, the code that follows the pattern of "highly visible and obvious", like the conduit, is probably the better code.
All that being said, I prefer simple walls, with conduit hidden inside it. I'm just happy to admit that what I like it not universal, and that other have their own styles.
Or they just run cable along the walls.
Many garages will be as you describe.
Wiremold 500 surface raceway is what I would recommend, it’s a basic surface raceway for electrical conductors or cables: https://www.legrand.us/wire-and-cable-management/raceway-and...
There are probably residential raceways that blend in better, but I’m not familiar with residential construction.
There are plenty of ways to get a cable from point A to point B inside of a wall, particularly if you have a single story home with an unfinished attic and basement. A spade drill bit, a fish tape, and a multitool/rotozip can get a cable pretty much anywhere if you can drill a hole into the wall cavity from above or below.
If I walked into a listing and saw surface raceway everywhere, I’d only bid what I was comfortable paying leaving room for a gut rehab. It’s evidence of a high level of DGAF at a minimum and likely isn’t the only place that corners were cut.
Well, you aren’t wrong. This is exactly the thinking behind that.
The other response is correct that it’s nicer to have it all covered up though. I guess it comes down to a bit of perfectionism. If I stick everything on the walls I will always feel like there is work left to do.
That said, our living room is still (3 years in) a mess of (nice, not industrial) on-wall conduits.
easy, skip the decoration
This seems like you are missing the point. The REASON that having a conduit hanging on the wall lowers the home value is because it looks bad and ruins the aesthetics… for both the current home owner and a future home owner. The reason the person buying the house would pay less is the same reason me, the current home owner, doesn’t want it… it looks bad.
I understand that some people don’t care about aesthetics at all (I am probably closer to that end of the spectrum than most), but you also have to realize that people care about how their home looks for more reasons than just resale value. Do you think the whole world only makes their houses look nice in case they want to sell?
For this house, the easiest way to pull wires from one end of the house to another (after the original construction) is to first go down into the crawl space, cross horizontally there, then go up again.
I don't own a house and have never owned a house. This will probably sound stupid and I am sorry if this is something obvious.
Is it that my spouse will leave me or my parents will disown me if I run a conduit just hanging on a wall? What is this obsession with hiding all wiring within the drywall? What am I missing here?
It could be something as simple as a conduit like https://i.imgur.com/6X5of8Y.png
Not that I have a leg to stand on because I still can't afford to buy a home outright (and at current rate, never will). I live in an apartment and I don't make any changes to it. I cannot even imagine doing something simple like drill a hole on the door for a doorbell. So, I am definitely hypocritical when I say this. Maybe I am just being salty as a non-home owner. I feel like all of this comes from treating our homes as some kind of liquid asset that we must keep in pristine condition at all times so we can stage it and sell it at a moment's notice.
If you own your own home, why not live in your home like you own your home? Run that conduit across all the walls (and through inside door frames or something like that if you must). If not, do you really own your own home? Why not just live with housing insecurity like I do?
Edit: spelling