Most interior doors have a gap between the bottom of the door and the top of the floor, and you can cable in the gap if you don't mind the look. If the threshold is carpetted, you can often squish the wire into the seam where the carpet meets the door frame.
You can get one, maybe two, runs into a room that way, so don't put your central switch in a room like that, and if you need more than one drop in a room, put a switch in the room.
I have made many such holes in door frames for passing Ethernet cables or TV coaxial cables.
When you do not want to touch the walls, such cables can be routed on the edges between walls and floor and they can be masked by a cover having the wall color, to be invisible, except where passing through a door frame.
At least in Europe where I live, I have not seen any walls through which you can make clean holes with high probability. Almost always there is some small damage, which must be repaired, e.g. by filling with plaster and/or repainting. In most cases you also need a percussion drill machine, not just a simple drill machine. Here most walls are made either of concrete or of bricks.
So at least in the kinds of walls that I have seen, passing a cable through a wall requires more time, more diverse skills and a larger set of tools and materials than passing a cable through a door frame, which requires only that you have and know how to handle a drill machine and a cable crimping tool.
While common outside the US, most of it in newer constructions tends to be light concrete which is trivial to drill. But even 40MPa concrete is fine with an SDS, rent one if you don't wish to spend money on. In short drilling through outer walls is not difficult either.
My aesthetic requirements are basically zero (to the dismay of my partner indeed; we meet in the middle) but I do want to be able to practically use the apartment still.