That's an unusually low price, assuming it's new. Can you give a reference of the shop where you purchased it?
For example, the first price I've found of a Gigabyte Brix (a relatively common mini PC) with an N2807 + 8 GB RAM + 512 GB SSD + no wifi, is 210+ USD.
One of the cheapest x86 systems that I'm aware of, is the Odroid H3 (+), which still costs 129$ without RAM/disk/Wifi.
This is definitely a machine I'd suggest as ARM SBC competitor, but I'm not sure that the price is representative of mini x86 systems (when I was looking for one, a few years ago, it was the cheapest by a significant amount).
Amazon seems to have multiple listing for Beelink PCs with the exact same specifications, but different price points.
What brand is your system from? Or isn't it pre-assembled? The price of $180 sounds perfect for an increase in performance and still low power requirements.
It is a Beelink model from Amazon a couple of weeks ago. It came pre-assembled with Windows 11 pre-installed. I wiped it and installed Proxmox.
There are also models on Amazon that use the N5105 that are passively cooled. I havn't used one, so I'm not sure if there is any throttling going on with those models.
Also, the plan was $100 for the pi4+keyboard+everything combo before all this (lets just call it the 2020 era) happened. But $100 is still a much better deal than $180.
Now get off my lawn you kids.
https://www.jeffgeerling.com/blog/2019/best-way-keep-your-co...
These jasper lake/etc machines are usually between $100 and $200 new and are a much better deal than an 8G rpi, even at MSRP for a laundry list of reasons starting with they are much more capable machines.
Look for chuwi herobox, beelink, etc
The pi's were priced right when they were $35, because adding storage, case, RTC hat, powersupply, etc would double or triple the machine build cost but still land <$100 when the floor on cheap PC's (usually Via) were in the $300 range. But driving the price up for just a tiny amount of ram...?
These days you can buy new windows tablets for $200 (from big companies like HP for example), and these low end NUC style boxes frequently for less than $100. Sure the perf isn't great, but even the worst are equal or better than the very aged A72, low clocked designs lacking even crypto acceleration you find in the rpi4.
Never mind if your actually trying to just save money, midrange refurb and used machines from a couple years back will give you perf within a few percent of the current hardware in the same price range, and its going to be far more capable.
(I just stumbled on a very capable i5 based HP slim fanless desktop, refurb for $109 on amazon while checking the prices of that chuwi. There are a bunch of these "laptop in a slim desktop" case systems frequently for very reasonable prices.)
Some of them add extra value by doubling as other desktop furniture (phone stands, pen holders, etc.).
Found a Thinkcentre M600 on ShopGoodwill for $40 with an SSD. Added $10 of RAM and it's honestly a better fit for what I do with it. Crazy slow for a windows desktop but perfectly snappy running debian.
For someone just looking for an inexpensive PC, and with the way availability and markup are right now, the Pi just doesn't make sense. Used / cheap SFFs are a good way to go.
These are, indeed, RPi killers if you don't mind the power consumption and the lack of built-in GPIO.
I have a cluster of HP thin clients running... clustery things.
- Its not a Intel platform (trust issues due to IME)
- Power consumption low enough for running 24/7
- Noise - its quiet enough so it does not disturb me while sleeping
- No support for weird power management, machines going dark for no discernible reason has always been bugging me
What i really disliked was the instability of SD cards, and the media playback was mediocre back then due to a lack of HW accelerators.
Its not a Intel platform (trust issues due to IME)
See, this is what I don't understand, the pi's GPU is running a huge pile of closed source proprietary code as well, and at a first approximation has full system visibility too (ignoring it apparently has a bug limiting its actual view of all system ram on the higher capacity models). It could in theory be injecting/monitoring the nic as well. AKA, its just as privileged as the ME.So why do you "trust" it more than the intel? If anything the intel probably has 100x as many security researchers analyzing it.
Also RE power, the pi idle power tends to be quite poor. Mine idles at ~4W, which is worse than a number of low end intel machines I have, so for something that might sit idle for >12H a day, it might be less efficient than recent intel machines.
Intel is known to do this shit, Broadcom isn't, yet.
I'd always prefer a blob on the boot partition over an EEPROM that i can't access without disassembly.
I mean its a "feature" being sold, if you get a vpro/amt machine it still needs to be turned on (the couple I have, have bios options for enabling/disabling the management features).
I'm not going to wait until the next Snowden uncovers whatever the IME is for.
AFAIK that SoC had big and little DMA engines. The little engines can't reach the upper half of memory but the bigger ones can, which means you can just use the big DMA engines to muck with any RAM you yourself can't directly see. It's annoying for practical purposes but it doesn't have any security value.
You're right to be paranoid. If only people fully grasped what the IME actually was.
If you want to connect a "regular PC" to the real world, you can get a USB DAQ but even the cheapo LabJack, NI or MCC models are at least a hundred bucks.
For non realtime use, the $10 USB->GPIO ones work fine on any computer with USB.
In fact many of them are just ESP's, and work even better than the pi for hard real-time because you write custom bitbanging ardunio code and send the results/control signal over the USB. They become custom peripherals with a /dev/ttyUSB endpoint.
https://www.adafruit.com/product/815
I got my pi zero w a lonnng time ago when you could actually find them.
1: https://www.dfrobot.com/product-2594.htmlI have one of adadruit's RP2040 boards and use the REPL a lot to talk to other things connected to the i2c bus. For example, controlling servos from a servo board, or getting orientation data from an IMU. Basically, i treat the circuit python REPL like a command line
I just spent 20 minutes doing some searches in all the usual suspects (Amazon, eBay, AliXpress, and some online stores I can usually get good prices from) and the cheapest I found for the configuration you specified was around $400..
Mostly it seems to be the RAM that boosts the cost. For 8GB I can get it down to $260, but I've seen nothing even close to $180.
Edit: I see elsewhere in the thread it's a Beelink from Amazon. Around ~$237 is still the cheapest I can find..
Still a good price.
I'm in the market for a cheap PC/Laptop for my kids (minecraft, zoom, MS teams, chrome, and Roblox)
The laptops use the N6000 chip, N5105 is for the small desktop lines. There is also a more expensive N6005 for desktop.
N6000 is more aggressive in power savings. So higher single thread, lower multi. It also has more silicon dedicated to the GPU, which is about a 25% boost (30 execution units vs 24).
The biggest practical difference I've seen is that 95% of the laptops have fixed memory that tops out at 8GB. HP has one that accepts an SO-DIMM. If this is a reasonable level for the minecraft they do then you should be fine. I know with my kid's systems I had to go up to 12GB because of the mods they like.
Given the current availability and prices, yes. Mind you, they started much, much cheaper.
2) the packaging with the keyboard actually is fairly compact. I'm going to use mine like I would normally used a boxed 4b (i.e. as sort of a home server tucked out of sight) but am not going to try taking the board out of the case. It looks like a small keyboard in a normal keyboard enclosure and doesn't take that much space. It isn't really that visible that there is a computer inside.
does one stop being a consumer once the GPIO is touched?
Intel boards with a unified GPIO are pricey industrial units, and I don't consider pinning out a serial port or parallel port to be a very clean solution; and I consider an attached sister-board Arduino to be even less tidy.
Having a desktop with that type of IO is just handy for the things that I do as hobbies, just as my multimedia Intel-based laptop is handy for when I want to consume media.
the unit price is ridiculous for RPis right now though, i'll certainly agree to that.
I recently purchased a mini PC with an Intel N5105, 16GB of Ram, 512GB NVME SSD, two gigabit ethernet ports, two HDMI ports, many USB ports, and Wifi 6. This system was $180, all in. You can't find a Pi 4, much less one with equivalent specs for anywhere near this price. If you can find it, an 8GB PI4 is $75 and then you need to buy the case, power supply, sometimes storage, etc.
The N5105 system when under full load is only drawing 7 watts, I've seen it as low as 4 watts when idle. The Pi 4 uses a BCM2711, which according to Passmark, is about 4X slower than an Intel N5105.
I do think the PI is great from the hobbyist and industrial perspective, but to just use it as an inexpensive PC seems like a waste.