Small plants require less capital. They're easier to manufacture. They can iterate faster. They have less environmental impact, and therefore fewer regulatory hurdles. They require less labor to build and a smaller supply chain.
I expect that the engineering is harder, because scale can bring efficiencies. But still, I think the winner is going to be a small device, not a behemoth, if only because a small device can come online years earlier.
Drop a chunk of U238 in/near the fusion reactor somewhere, let it absorb stray neutrons, and you'll soon have some plutonium. That's bad for control of nuclear weapons proliferation, which relies on high-energy neutron sources like breeder reactors being difficult to build and expensive.
Not sure about the radiation profile from this system though.
The energy output of HB11 consists of fast-moving alpha particles, which is good because that's the energy you capture, along with x-rays. None of this would activate reactor components. The waste product is non-radioactive helium.
https://en.wikipedia.org/wiki/Aneutronic_fusion#Boron
Neutron energy would be a bit under 3 MeV, comparable to fast fission neutrons but in much lower quantity for the power output.
https://en.wikipedia.org/wiki/Neutron_temperature
Interestingly, that page says the thermal neutrons in a conventional nuclear reactor are better at activating materials than fast neutrons.
According to a presentation I saw by the leader of MIT's fusion program, the inner wall of a D-T tokamak would be activated by the neutrons, but would only need to be stored for a few decades. D-T releases 80% of its energy as 14 MeV neutrons.
According to LPP, which is working on a different boron fusion design, a 20MW reactor would activate the walls with short-lived radiation, but it could be safely opened for maintenance after about twelve hours (iirc).
This is something different. With every laser shot there will be a burst of alpha particles. Then they'll slow down and just be plain old helium. If the direct energy conversion works, they'll get slowed down very quickly.
Only if you eat or inhale them. A sheet of paper will stop alpha particles.
It might also be worth pointing out that "It must be safe! They even put it on wristwatch dials!" is not, historically, a sound argument.
This depends on the threat model to some degree, but there's security in knowing that it's vastly harder for a threat to affect multiple targets at once, no matter the threat.
That might be different for this fusion device, but for outdated looking fission reactors it’s artificial dilution for NPT purposes and by no way a technological limitation.
I imagine most software is tied to the specific devices they run on, but perhaps there's coupling or analytical software that could be better geared towards the problem domain. Is there any fundamental issue that is waiting for a good software solution?
https://github.com/terrapower/armi
Some more open source things in the domain can be found here: https://github.com/paulromano/awesome-nuclear/blob/master/RE...
I think if you have a software background and want to contribute, you should consider applying for a job with one of the projects themselves. General Atomics lists 135 software jobs (https://www.ga-careers.com/search-jobs/software/499/1) for instance.
Your parent merely notified us that more than one type of product is in development at that company and one that is not fusion is specifically designed to kill people.
I've dreamed about getting into fusion research myself, and concluded the best pivot would be to help with the plasma simulations at a university while obtaining a PhD.
In my device, sometimes, some ions will be traveling in a vacuum with a high mean free path, and at other times, the plasma will be as dense as lead. It's VERY difficult to simulate, to the point that it's almost better to just estimate and start building to see if I can start to get close to a solution through careful experimentation.
The part that jumped out at me as strange is that they claim their process generates electricity "directly" without having to drive a turbine. Supposedly they produce helium cations, and that can drive a circuit.
Can anybody comment on whether that makes sense?
Conventionally, neutrons are used to generate heat which is then used to drive steam turbines.
Thus you would capture the energy with a "reverse coilgun", "regeneratively braking" the particles down to a non-relativistic speed, rather than just using them to charge a capacitor plate.
Most fission plants throw away about two-thirds of their energy output as waste heat (according to: https://www.answers.com/Q/How_much_of_the_heat_generated_in_...), and their cooling towers are so much bigger than the reactor itself that they've become a symbol of the plants as a whole.
The cooling towers? The photographs in the news commonly show huge clouds of water vapor escaping from the tops of the towers with a picture caption about "nuclear" power or some such.
So, the suggestion is that nuke plants generate huge clouds of dangerous radioactive byproducts.
Such news content is easy: (1) Suggest that the cooling towers are the nuclear reactors and (2) don't mention that what is coming out is just water vapor, from water recently in some river or lake. Now the news people have their audience by their eyeballs for ad revenue and/or politics as in
https://www.peakprosperity.com/2019-year-in-review-part-1/#c...
“The whole aim of practical politics is to keep the populace alarmed (and hence clamorous to be led to safety) by an endless series of hobgoblins, most of them imaginary.”
~ H.L. Mencken
https://www.exeloncorp.com/locations/power-plants/limerick-g...
The same imagery shows up on the covers of nuclear textbooks:
https://www.amazon.com/Nuclear-Engineering-Handbook-Mechanic...
If anything, laypeople think that radiation is scary because it's invisible, tasteless, and odorless.
In principle this could be more efficient than a heat engine, although the Wikipedia page seems to say that an "economically feasible" version would have around 60% efficiency, which is the same as a combined-cycle power plant.
What is your opinion on SPARC and tokamak energy?
p-boron fusion is interesting as a possibly practical energy source. The hurdles are a matter of engineering and finance, not fundamental design flaws. But it's useless as a jobs program for weapon experts, so must rely on commercial investment.
Lawrence Livermore -- a nuclear weapons lab -- has studied inertial confinement fusion for decades. They don't have a tokamak.
It's seems bizarre to ignore the impact HTS tape would have on the plausible operation of MCF.
> The alpha particles generated by the reaction would create an electrical flow that can be channeled almost directly into an existing power grid with no need for a heat exchanger or steam turbine generator."
If you energy production solution can achieve a lower TCO in an existing market segment, steps six and seven (production and supply chain) take care of themselves. The poster child for this was 'on premise PV generation.'
Once a nuclear technology demonstrates a lower TCO for baseline power generation, its game on.
The main benefit of nuclear is its relatively low carbon footprint and in theory less risk of spiking fuel costs because we run out of raw materials. That's the dream of fusion anyway.
Nuclear power infra is not cheap and even fusion will have security and decommissioning costs.
Forget cost as the main factor, grid power will never be free. That's a fantasy - even publicly owned utilities will/are funded by taxation. You're paying for price and power stability. Domestic fusion means you don't need to rely on foreign resources (eg Russia cutting off the gas).
Putting renewable generators in your home has a high capital cost, but people forget that you're also cushioning yourself against grid outages. It's insurance more than anything else.
A fusion reactor the size of a shipping container? Plop one down between my neighbor's house and my house. Right where our backup generators now sit. It's about the same footprint.
No more distribution costs. Well, except for Amazon's fees to drop off the uranium now and then. :)
Why is there any radioactive material produced by a fusion reactor ?
Neutrons produced in this reaction, being chargeless, cannot be contained within the electromagnetic field, thus leaving plasma and reacting with the surrounding material (e.g. tokamak chamber walls) and producing radioactive elements. This leads to activation and radioactive degradation of the reactor itself.
> "The timeline question is a tricky one," he says. "I don't want to be a laughing stock by promising we can deliver something in 10 years, and then not getting there. First step is setting up camp as a company and getting started. First milestone is demonstrating the reactions, which should be easy. Second milestone is getting enough reactions to demonstrate an energy gain by counting the amount of helium that comes out of a fuel pellet when we have those two lasers working together. That'll give us all the science we need to engineer a reactor. So the third milestone is bringing that all together and demonstrating a reactor concept that works."
The fourth step is to deliver the reactor concept as promising machine. The fifth step is to attach it to power generating equipment and demonstrate the power plant. The sixth step is to scale up a supply chain capable of delivering multiple units that compete with other sources of commodity electricity (or other energy products). The seventh step is to scale to large scale without being unduly burdened by either supply chain (raw material, skilled labor) or regulatory impact/public concern that inevitably scales with any large fleet of any new tech.
Fission made it to step 7 and then faltered and is now teetering depending on where you look. It never scaled past 5% of total world primary energy.
The promise of fusion is to deliver nuclear energy with less public concern than fission because it makes less radiologically hazardous material. The challenge is to go through the physical, engineering, and commercial viability phases as a power plant.