The energy output of HB11 consists of fast-moving alpha particles, which is good because that's the energy you capture, along with x-rays. None of this would activate reactor components. The waste product is non-radioactive helium.
https://en.wikipedia.org/wiki/Aneutronic_fusion#Boron
Neutron energy would be a bit under 3 MeV, comparable to fast fission neutrons but in much lower quantity for the power output.
https://en.wikipedia.org/wiki/Neutron_temperature
Interestingly, that page says the thermal neutrons in a conventional nuclear reactor are better at activating materials than fast neutrons.
According to a presentation I saw by the leader of MIT's fusion program, the inner wall of a D-T tokamak would be activated by the neutrons, but would only need to be stored for a few decades. D-T releases 80% of its energy as 14 MeV neutrons.
According to LPP, which is working on a different boron fusion design, a 20MW reactor would activate the walls with short-lived radiation, but it could be safely opened for maintenance after about twelve hours (iirc).
This is something different. With every laser shot there will be a burst of alpha particles. Then they'll slow down and just be plain old helium. If the direct energy conversion works, they'll get slowed down very quickly.
Only if you eat or inhale them. A sheet of paper will stop alpha particles.
It might also be worth pointing out that "It must be safe! They even put it on wristwatch dials!" is not, historically, a sound argument.