News for hackers. Stuff that matters.
Re:Radical hydrogen-boron reactor leapfrogs current nuclear ... by DennisP on Friday February 21, 2020 @02:37PM (#22386041)
So I looked it up, and found there actually are two side reactions from the primary fuels, no deuterium required. In a thermal plasma the resulting neutrons would carry less than 0.2% of the energy output. I don't know what the percentage would be for this reactor, since the fuel isn't a thermal plasma while fusion is happening.

https://en.wikipedia.org/wiki/Aneutronic_fusion#Boron

Neutron energy would be a bit under 3 MeV, comparable to fast fission neutrons but in much lower quantity for the power output.

https://en.wikipedia.org/wiki/Neutron_temperature

Interestingly, that page says the thermal neutrons in a conventional nuclear reactor are better at activating materials than fast neutrons.

According to a presentation I saw by the leader of MIT's fusion program, the inner wall of a D-T tokamak would be activated by the neutrons, but would only need to be stored for a few decades. D-T releases 80% of its energy as 14 MeV neutrons.

According to LPP, which is working on a different boron fusion design, a 20MW reactor would activate the walls with short-lived radiation, but it could be safely opened for maintenance after about twelve hours (iirc).

There are no comments on this comment yet.