USB-A is nowhere near being on the way out yet. Especially when their own damn mobile devices still come with A cables. We're way into their attempt to push everything to USB-C but I went to Target to grab one for my work laptop (to be able to charge an iPhone or iPad from it) and the C cables that are anything other than C-to-A (for some android phones) are 100% Apple branded. Everything's still A and Micro-USB. A whole wall of that. USB-C? Only in a tiny Apple section. Flash drives? Mostly still A. Everything, really. Having only C continues to suck, and it looks like it will for a while. Apple's switch to C doesn't even seem to have changed things that much—everyone seems to just still do A and assume the poor Macbook users will plug in a hub or use an adapter.
But your computer only has two USB-C ports!
No problem, you think. You've run into the same problem before with computers with USB-A connectors. The answer was simple: buy a hub that connects to one of your computer's USB-A connectors and provides several USB-A connectors to hook up your devices.
You just needs a hub that connects via USB-C and provides several USB-C ports.
That's harder than it should be. There do not seem to be many of these available, and those that are tend to not have very good reviews.
I may be mistaken but I think that was the original USB dream as well. It's been a source of immense irritation to me at times over the years to find that I don't have quite the right mini/micro/whatever[1] USB cable to hand to connect whatever device I happen to have with me. USB-C just adds to what is already a mess of a situation as far as I can see.
[1] Don't get me started with cables that have USB-A on one end and some proprietary connector on the other: I'm looking at YOU, Garmin, with the stupid cables for your Fenix line of watches (which aren't great, btw: learn from my mistake and don't buy one), and YOU, Nintendo, for the daft 3DS charger socket that would have been just fine if it were a micro-USB socket.
What Apple did though with MagSafe was simple yet elegant. It is something I do as well with my Micro USB and USB-C cables (making them magnetic; I'm using TOPK cables for that). USB-C as replacement for MagSafe is a step backwards.
Mind you Apple seems to be missing one of the main practical advantage of USB-C by slapping a lightning port on their phones thus ensuring donglegeddon. This drives me insane. Apple for all the puffery about giving consumers what they don't know they wanted is instead giving consumers an inferior choice that ensures lock-in and keeps vendors happy.
In any case I'm grateful that the Mac Mini I upgraded to recently at least offers 4 generous Thunderbolt/USB-C ports.
I've heard this second-hand (or third-hand) and my EE knowledge is nowhere near good enough to say how accurate this is, but: Apparently the power delivery negotiation mechanism in USB-C is vastly more complex than for USB-A, so hubs with lots of USB-C ports would need new, more complex chips compared to equivalent USB-A hubs. It already took a few years for reliable hubs to turn up when we first got USB 3.0. I'm assuming the manufacturers might also be trying to hit USB 3.1 Gen2 speeds at the same time as supporting USB-C, which presumably further tightens reliability tolerances. I'm guessing with all that, they might not be able to hit the desired price points with this stuff yet, and all that complexity probably also takes a lot of power so bus powered USB3.1 hubs with USB-C downstream ports are presumably a tricky proposition too.
Apple and the fanboys calling it a "Legacy" port are completely out of touch with reality.
Most of the devices I have purchased in the last year have been USB-C. Sony headphones, LG display, my car even has USB-C charge ports. Look at many manufacture lineups and the new flagships are USB-C. I do still have a bunch of USB-A devices, but they're older buys at this point.
I think there will be a few year gap, but 10 years might be a little too pessimistic. Time will tell I guess!
* https://www.gurufocus.com/term/InventoryTurnover/BBY/Invento...
Why would headphones have a USB port? BT headphones that need it for charging?
It is now a legacy port on Apple laptops. I think it's the correct term to use in context, regardless of fandom. It is referring to ports that existed in the past, and are being phased out on the platform in question.
Soon enough there will be a major shift
Turns out "the technology of the future today" is actually really inconvenient.
FireWire, all speeds: was always coupled with USB or other tech that possibly didn’t carry data as fast as FW, but was “good enough” for lots of things. FireWire never really took off aside from digital video cameras, and that got phased out over time, too. DisplayPort: nope.
Compare that to the original iMac, which dropped the serial and SCSI port. People gasped, but in not too long (at least now, looking back in it), USB was everywhere.
And now USB-C. Would it have been as popular as it currently is - on lots of chrome books, many phones, even the Nintendo switch - if Apple has not been so gung ho on it? Possibly, but a bit of me doubts it.
Just because they ship a laptop with 4 USB-C TB ports and nothing else doesn't mean they're driving USB-C adoption nearly as much as say Samsung or Huawei. If anything because they literally don't use the same port across different types of devices unlike other phone/laptop sellers... They're discouraging USB-C adoption and making dongles more appealing since you will still need dongles if you're using all Apple even if you have USB-C native stuff.
Apple aren't pushing people towards expensive new standards they're just making consumer unfriendly decisions. Making it so you can't use USB-A does not mean you're making it easy to adopt USB-C... They make adopting USB-C unnessecarily painful.
[EDIT] I just think they whiffed well ahead of the ball on this one, is all. No USB-C ports to 100% USB-C ports was premature. I think the percentage of their market that was like "oh good now I can plug all my USB-C stuff into this, which is most of what I have!" rounds down to zero, while all my geek friends and co-workers' reactions were closer to "so... there will be zero things in my home or office I can plug into this without an adapter? And for this I gain... maybe 1mm more of thinness?" with actual experience quickly confirming that concern as valid, as #donglelife continues without end in sight.
Everybody was concerned that the iMac's only I/O port was USB (when others had serial, parallel, and maybe SCSI/USB as an afterthought), and it was completely incompatible with legacy peripherals. For many years USB accessories were considered specialty items for the Mac market.
It kinda sucked at first... but it's not clear if USB would have even caught on if Apple didn't do that. In the long term, Apple clearly made the right move.
At the very least, this isn't outside of Apple's usual playbook.
Here's the problem with that argument; Macs are a pretty small percentage of the computer market, and always have been. Consumer peripheral companies are driven by what people will buy, not moving the market forward.
USB was always going to be what it is, and if you want evidence of Apple's lack of power here just look at FireWire. They pushed it hard, but consumers didn't care so it died.
Macs are definitely a small portion of the computer market, but it’s a big enough market for companies to target. You’ll find Mac-specific keyboards from big-name companies like Logitech, for example. With the iMac, USB went from “weird connector nobody uses” to “we have a guaranteed pool of millions of customers with no alternative.” And because of the U in USB, those products worked with PCs too, if they had USB ports and drivers to make them work. It kicked off a virtuous cycle where more peripherals meant more computer supporting them meant more peripherals.
FireWire wasn’t the same scenario since there was no pressing need to support it. USB was good enough for 99% of what people needed. Unless you needed high speed storage or high end audio, you didn’t need it, and USB versions were cheaper anyway. FireWire was never pushed so hard that it was the only thing available on many popular computers.
Only a few people needed a camcorder (the most populous of the firewire-enabled devices).
The problem is, Apple isn't always right on these things.
What other stores will I have to avoid if I buy a MacBook in 2019?
Disagree wholeheartedly. I bought a USB-C to Video adapter from Amazon that has DVI, VGA, HDMI, and mDP and it only takes up one space on my MacBook and the only time I ever need to use it is when I'm presenting so I can just keep it in my laptop bag. That also means that I don't have to worry about what tech is being used at the place I'm presenting because I have all the options covered as opposed to just having 1 port or multiple ports on my machine.
At my desk, I have a USB-C hub that's connected to both monitors, storage, power, and my keyboard/mouse and it's also 1 cable and 1 slot on the MacBook. I can hook either up to whatever port on whatever side I want to. The flexibility is way more worthwhile than a dedicated HDMI port to me.
Well, unless you don't use an external display. And in that case why not just get an USB-C hub with video out? Your Thunderbolt-enabled Macbook should work regardless.
With the previous generation of MagSafe/MagSafe II power supplies, if the cable gets frayed, you have to replace the entire power supply. If the MagSafe connector gets hosed, you have to replace the entire power supply. Basically, if anything goes wrong beyond the AC input side, you have to replace the whole power supply. I ended up buying a whole bunch of these things over the years, so I am particularly sensitive to the amount of money I've spent.
With the USB-C power supplies, if something goes wrong with the cable, you just get a new cable. If something goes wrong with the connector on the cable, you just get a new cable. The only time you need to replace the entire power supply itself is if something goes wrong internally, or if something goes wrong with the USB-C connector on the power supply. And since cables are engineered to break before cable connectors, that is much less likely.
Don't get me wrong, the MagSafe connector has saved my machine on several occasions. But I understand why they want to be able to cheaply and easily replace just the cable part, because that's the part that is most likely to have hardware failures.
I do wish they had figured out some way to have a standardized cable interface on the power supply itself, and a MagSafe-like connector on the other end. That would have been the best of both worlds. But failing that, I think I will grudgingly take the second-best solution, which is to have a standard USB-C connector on both ends.
Now, this whole concept of mixing USB-C, USB-C Power Delivery, and Thunderbolt 3, that's a whole 'nother Gordian Knot that I really wish they had not created.
This is true for the existing design but it would have been easy to redesign the power supply to avoid it.
Just look at the other end: the wall-plug end has long been replaceable; it slides out so you can put on a different plug or a longer cable. This could be true on the MagSafe side as well -- then any Mac power supply could be used with any generation Mac, just by switching out the MagSafe/USB-C end.
https://www.amazon.com/Magnetic-Adapter-Connector-Quick-Char...
That's such nonsense. I've never had a thinkpad cable wear out on me. I've got a whole box sitting around somewhere full of them because they never break. But thinkpad cables aren't unusually robust; Dell cables last just as long. Most cables last effectively forever unless you slam a door on them or something unreasonable like that.
The only cables I've seen reliably fall apart after no more than a few years are Christmas tree light strings from the dollar store, and Apple charging cables.
The boon from the USB-C is that you can charge with a borrowed commodity cable when you've left your adapter at home and aren't in an office full of Macbooks. But it's been left to third parties to implement the concept of combining USB-C and a magnetic joint in the same cable. (I'd have been tempted to get into the manufacturing business if they hadn't...)
I bought a Snuglet, a thin metal shell that inserts into the Magsafe recess on the MBP. It reduces vertical and horizontal clearance between the Magsafe connector halves. In my case, this has completely eliminated unwanted disconnects.
Disclaimer: no connection with Snuglet or NewerTech, just have found the product useful as advertised.
[0] https://www.amazon.com/gp/product/B079NJM3VS/ref=ppx_yo_dt_b...
This is a design issue that doesn’t require a USB-C cable to fix.
Seriously not awful at all.
When I do presentations in my department's conference room, I just AirPlay to the AppleTV connected to the projector. It was a great solution because it allows anyone on the team to do presentations. All they have to do is mirror their screen and bring their mouse or trackpad into the conference room. It's been a godsend.
If I have to do presentations in other buildings on campus (about every other week), I bring my USB-C to HDMI dongle. It's super small, weighs nothing, and always works.
I've heard that there are some off-brand USB-C to HDMI adapters from Amazon that are flaky, but the Belkin one that the IT department got me is rock solid. I've used it probably 30 times so far.
I doubt anyone who really had to do presentations minds carrying around a tiny dongle, compared to all the other things they'll bring to a presentation.
if you're a semi-pro photographer, the lack of an SD card slot is terrible
The pro photographers in my company's Communications department all say they hate built-in SD card readers. They all use standalone units. I don't know why, though. I'll have to ask.
And of course almost all accessories are still USB-A.
That's the same moaning people did about parallel and serial ports.
That's, uh, great if there happens to be an expensive AppleTV connected to the projector.
Ports are about compatibility with the outside world. That means having the same connectors that the rest of the world has.
I don't get to choose what those connectors are. Apple as a company has some influence on that, but not enough.
Neither advocating nor deprecating. Only observing.
A buddy of mine used a dongle for his big screen pre-streaming features era TV. He mainly used it to stream games from his phone or iPad to the TV, and Netflix. I think it was chromecast though, not airplay, but same difference really.
[0]: https://www.amazon.com/hdmi-airplay-dongle/s?k=hdmi+airplay+...
Just curious why? I use mine almost every day and have never had issues.
It's not an Apple-branded one though, it's "Cable Matters"... but if anything Apple adapters tend to be higher quality than third-party ones?
(I also use a Cable Matters SD adapter more than once a week to transfer video and it's been working flawlessly for over a year too.)
Actually the Apple HDMI adapters seem to be very fragile. They continue to stop working after moderate use. I have two dead ones on my desk and plenty more that we bought with MacBooks. The offerings of MonoPrice seem to be solid though. Apple's entry also seems to have problems with budget TVs unlike others, it is very weird.
I do, almost daily. I even bought the HDMI dongle thinking I might need it when doing presentations outside of my usual workplaces but I have literally never used it. The presentation problem was solved years ago by airplay and chromecast, and the only thing I use HDMI for these days is to hook up things permanently, not temporarily.
I did think at first that I’d miss MagSafe, but I’ve never had an issue with the cable sticking in the port such that I yank my laptop of the table, and I’ve yanked that cable out a number of times. As another commenter rightly pointed out as well, the move from MagSafe actually meant when my cable got damaged because someone put a chair on it I didn’t have to swap the whole power supply, just the cable. Huge win and since I had extra I could solve it right then and there.
I’m no photographer though, so can’t really say for the SD thing. Maybe that does suck.
FWIW, you're far better off getting a native cable with a USB-C end like [1] or [2] rather than using a dongle.
[1] https://www.amazon.com/Cable-Matters-USB-C-Supporting-Black/...
[2] https://www.amazon.com/Cable-Matters-DisplayPort-USB-C-Suppo...
Besides, I'm not fundamentally against dongles, if you REALLY need one because tech has changed or whatever then sure, but let's not require 5 just to operate your computer normally straight out the box.
I really don't see any disadvantage to having an HDMI port, a Type-A USB port and an SD card reader around for making the transition period to USB-C easier. Considering the compromises made to the keyboard, I don't buy that the ports were the thickness limit, either.
My suggestion obviously wasn’t intended to cover your bizarro workplace’s 1980s VGA needs. Because I’m not psychic and have no idea who you are.
https://www.usa.canon.com/internet/portal/us/home/learn/educ...
http://d810.org/recommended-sd-and-cf-media-cards-for-nikon-...
I agree with you that it's pointless to do that in 2019, but that doesn't change the facts.
Of course, the next CF standard, CFexpress, is XQD-shaped and devices will be backward compatible.
Also once iPhone new iPhone will have a type c charging you will be able to use a cable from your MacBook to charge your phone, so you will only need to carry MacBook charger without worrying about a separate cable for your iPhone
I present all the time, but I can't remember the last time I had to plug in. The problem with trying to plug in is that the other side could be anything from VGA to DP. Should VGA ports be stuck back onto the MBP?
> And if you're a semi-pro photographer, the lack of an SD card slot is terrible.
What about the CF, XQD, or mini-SD slot? I'm an enthusiast photographer (maybe even semi-pro as I have been paid for my pics before), and soon I will not have a need for an SD card slot.
> mag power
Mag safe was nice, but I recently took a trip where I needed a single power brick and cable for my MBP and iPad. Once the iPhone goes USB-C it will make traveling even that much easier.
I didn’t even realize how much this would matter to me until I went traveling. All of a sudden I don’t even need anything but the brick, because I’ll just either hook it up to my phone directly with a ubs-c to lightning cable (and it charges crazy fast) or I’ll use the laptop as a hub. I still carry a sugar cube with me just in case, but I never use it really.
If you're a semi-pro photographer you should stop wasting your time with a built-in SD card slot and get an external USB 3.1 Gen 2 card reader. Fstopper running the numbers:
> Even if you don't want to spend the money on a more expensive memory card, buying a nicer ProGrade card reader is still worth it.
All of the above plus a thicker battery.
95% of the time I use my MBPr plugged in, but the few times I need to run it on battery power it would be nice to have longer than 2hr run time (late 2013 MBPr 15" w/ Iris Pro/GeForce GT 750M and brand new battery).
At least with USB-C Macs you can bring a separate standard USB PD battery pack and charge off that. There was no such option for the MagSafe Macs (there was a third party company that made one but Apple sued them to death)
I can help with that:
https://www.apple.com/sg_smb_5200/shop/product/MB571Z/A/mini...
Half the charm is lost without seeing the two DVI cables that plug in to it.
When I first got a new air I loved the new keyboard - I really like the feel - but now I have repeated keypresses I have fallen out of love with apple.
Maybe try a different manufacturer.
There is very little reason not to have all ports - hmdi, mini display port (+display port) readily available; connected straight to the video card. There is plenty of room.
I would rather just stick with the one USB-C connector.
It took some time, but other companies started removing the DVD drives from their laptops as well.
Maybe technology moves around Apple after all. If your Macbook does not have a SD Card slot, then SD Cards will soon be dead.
Having a single USB-C, though, is still frustrating.
Also, as someone who still has a iMac with an optical drive, their failure rate (Apple or any other brand) has always been atrocious.
Not a chance - professional photographers won't be ditching their cameras anytime soon.
Maybe you don't ever need to present anything from your laptop, but if you talk to anyone who does, they will tell you how awful it is to not have an HDMI port. The USB-C to HDMI is the worst adapter I've ever seen.
And if you're a semi-pro photographer, the lack of an SD card slot is terrible. And of course almost all accessories are still USB-A.