News for hackers. Stuff that matters.
Re:Detroit’s LED streetlights going dark after a few years by dreamcompiler on Tuesday May 07, 2019 @05:30PM (#19853634)
The dirty secret of LED lighting is that while LEDs themselves last a long time, they only do so in the presence of good power supply design and good thermal design. If you cut corners on the power supply or thermal management, LEDs will burn out much quicker than older lighting technologies. The majority of consumer-grade LED "bulbs" available today are shitty on both counts, AFAICT.
Re:Detroit’s LED streetlights going dark after a few years by marcosdumay on Tuesday May 07, 2019 @05:38PM (#19853691)
Fluorescent lamps have the same issue with power supply (but not heating). And compact fluorescent bulbs had the same issue of only bad power supplies being available.

We urgently need some standards over electronics longevity, like the ones we have over power consumption.

Re:Detroit’s LED streetlights going dark after a few years by icebraining on Tuesday May 07, 2019 @05:47PM (#19853752)
It would be interesting if there were standard warranty terms (no fiddling with the tiny print) and shops had to post the product's price/warranty-year ratio along with the regular price. Maybe it would promote some competition, as people would start to think in the longer-term cost.
Re:Detroit’s LED streetlights going dark after a few years by wjnc on Wednesday May 08, 2019 @02:43AM (#19856425)
In Europe you can. I've always saved receipts and boxes of lamps (both for inventory and waranty purposes). It's been trivial to return lamps and get free replacements even after the 2 yr default warranty by claiming it broke to soon and giving a quick calculation how with say 4 or 8 hours a day I couldn't have hit the hourly mark at that point in time. Must have gotten at least a dozen free lamps. It is uneconomic neurotic consumerism on my part though. But I sure do hate how old fashioned bulbs were made illegal based on surely false economic lifetime projections of LEDs. On top of that half of the year I'm central heating and I couldn't care less what the source of my heat is.
Re:Detroit’s LED streetlights going dark after a few years by WAHa_06x36 on Wednesday May 08, 2019 @04:24AM (#19856906)
Central heating especially can be much more efficient than simple resistive heating. Here, central heating runs on waste heat. You can also use heat pumps more efficiently than resistive heating. Incandescent bulbs are inefficient even for heating (to say nothing of the OTHER half of the year when you'd still be wasting massive amounts of energy.)
Re:Detroit’s LED streetlights going dark after a few years by inciampati on Wednesday May 08, 2019 @04:55AM (#19857054)
Isn't the waste energy from the inefficiency of the incandescent bulbs fully deposited in your house? What is the other source of inefficiency that makes them inefficient for this by-use? The overall replacement cost? Just curious.
Re:Detroit’s LED streetlights going dark after a few years by icebraining on Wednesday May 08, 2019 @05:08AM (#19857113)
> Isn't the waste energy from the inefficiency of the incandescent bulbs fully deposited in your house?

Yes, and that mean an incandescent bulb is 100% efficient: all power used is converted to light+heat. But other systems can be more than 100% efficient - they can add more heat than the power they use. Or, in the case of central heating from waste, unused heat will probably have to be pumped off anyway, so using it is energetically free.

Re:Detroit’s LED streetlights going dark after a few years by xyzzyz on Wednesday May 08, 2019 @01:43PM (#19861203)
Most popular way to make electricity today is to heat up lots of water (via burning coal or uranium) to temperatures on the order of 500 degrees C (1000 F), and have the resulting steam power the turbine, which generates electricity by spinning magnets. This process is generally 20-40% efficient, that is, only 20-40% of generated energy is turned into electricity. The rest of the energy is waste heat of steam that cooled down so much that it's no longer economical to generate electricity from it (because the efficiency of the process goes down as the temperature difference between working fluid and environment goes down). The result is that more than half of the energy simply disappears in the thin air.

To increase efficiency, many cities run cogeneration plant, where the waste heat from electricity generation is piped into municipal heating system. In this scenario, the incandescent bulbs are wasteful way to heat the house, because it only uses 20-40% of the energy of the fuel, while municipal heating uses only waste energy to produce eletricity.

Re:Detroit’s LED streetlights going dark after a few years by nordsieck on Wednesday May 08, 2019 @05:13AM (#19857146)
> Isn't the waste energy from the inefficiency of the incandescent bulbs fully deposited in your house?

Yes.

> What is the other source of inefficiency that makes them inefficient for this by-use?

Heat pumps are more efficient at heating than resistive elements because they take advantage of already existing environmental heat, whereas resistive heating has to generate all of the heat directly.

Re:Detroit’s LED streetlights going dark after a few years by wjnc on Wednesday May 08, 2019 @08:03AM (#19858008)
Thanks for this insight. Never thought about this. I'm still on old-fashioned gas so in my case the only difference is one of gas being cheaper per joule even after the (in-)efficiency of burning than electricity. But indeed in the heat pump world you get more joules in heating than you put in in Wh of electricity. Still you should amortize the cost of pump per joule of heating. Bulbs were _cheap_.
Re:Detroit’s LED streetlights going dark after a few years by WAHa_06x36 on Thursday May 09, 2019 @06:54AM (#19867011)
No, what you should be amortising is the cost of the collapse of ecosystems and drowned cities due to global warming. Stop burning gas.
Re:Detroit’s LED streetlights going dark after a few years by iforgotpassword on Wednesday May 08, 2019 @04:18AM (#19856878)
Huh? Here in Germany you get 6 months for any type of bulb. Everything else is voluntary.
Re:Detroit’s LED streetlights going dark after a few years by kalleboo on Wednesday May 08, 2019 @06:53AM (#19857626)
https://europa.eu/youreurope/business/dealing-with-customers...

> EU law also stipulates that you must give the consumer a minimum 2-year guarantee (legal guarantee) as a protection against faulty goods, or goods that don't look or work as advertised. In some countries national law may require you to provide longer guarantees.

If the package says something like "10,000 hours" and you haven't run it for that many hours and it dies in 2 years you can get it replaced by EU law

Re:Detroit’s LED streetlights going dark after a few years by wjnc on Wednesday May 08, 2019 @07:56AM (#19857974)
In the Netherlands (my country) this is interpreted as that you have a right to a functional product for the usual lifespan of a product. After the two years guarantee you're supposed to share the repair costs proportionally. The boxes of bulbs state the expected lifespan (most home appliances do not) so that's an easy starting point. Plus I guess my local DIY-shop just doesn't want to haggle with me and just gives me the replacement each and every time since I'm the only one asking. I'm unsure about how my online LED-supplier will react if in 3-5 years my LEDs burn out, but I've tried to choose a respectable brand and supplier.
Re:Detroit’s LED streetlights going dark after a few years by marcosdumay on Tuesday May 07, 2019 @06:11PM (#19853930)
The energy consumption one has only a set of standard measurements. Many countries require that the seller do the measurement and place the results on a large tag. Nothing more, and worked wonders.
Re:Detroit’s LED streetlights going dark after a few years by inflatableDodo on Tuesday May 07, 2019 @07:44PM (#19854538)
That's a great idea.
Re:Detroit’s LED streetlights going dark after a few years by semi-extrinsic on Wednesday May 08, 2019 @12:57AM (#19855987)
At least one local store chain has a own-brand LED bulb, where the name of the store is printed on the bulb, and they advertise a 10-year warranty.

I've gone in and returned probably a dozen such bulbs without any receipt, just saying "hey, these are your bulbs, you say 10 year warranty, this is broken and they only came to the market 5 years ago".

Of course this only works now in the early days. If the date of manufacture was printed along with the store name, it'd be problem solved forever.

Re:Detroit’s LED streetlights going dark after a few years by tialaramex on Wednesday May 08, 2019 @02:47AM (#19856449)
The LED lamps I use in my bedroom are serial numbered. When one dies they can see when they sold it and authorise a free replacement if it qualifies. I thought the last one to die had qualified, but when I got as far as pulling out my records I realised the one I'd been thinking of was actually still in its box yet to be installed, so this one lasted almost double its warranted lifetime.
Re:Detroit’s LED streetlights going dark after a few years by oldjokes on Wednesday May 08, 2019 @09:00AM (#19858405)
Yes this. I have gone through insane numbers of CFLs and LEDs over the past ~20 years of being a homeowner. They fail, they buzz, they flicker, they fail more. I would have saved money and the landfills would be better for it if I just stuck with old incandescent bulbs that burn your fingers.
Re:Detroit’s LED streetlights going dark after a few years by all_blue_chucks on Tuesday May 07, 2019 @09:56PM (#19855259)
Opening bid: devices with inefficient power circuits come with warning labels as disconcerting as those that come with cigarettes.
Re:Detroit’s LED streetlights going dark after a few years by bdamm on Wednesday May 08, 2019 @12:28AM (#19855875)
"Going cheap can risk you and your family. Don't let fire start in your bedroom." (Picture of burnt family remains.)

Hmm.

Re:Detroit’s LED streetlights going dark after a few years by iforgotpassword on Wednesday May 08, 2019 @04:13AM (#19856848)
When led bulbs appeared on the scene I thought "well, that's gonna be the end of the oligopoly of incandescent bulbs". It made sense to me that those big old companies would totally fall behind.

But reality was that you had the choice between dozens and dozens of brands you never heard of before, and chances were high the one you picked just sucked. Amazon reviews were worthless because most people wrote them weeks after buying, very few people would come back if they failed after a year or two, and often by that time the company might have rebranded everything so you wouldn't know anyways. Not to mention how many people apparently are unable to recognize that atrocious 100hz flicker if the company cheaped out completely.

Long story short, all my led bulbs since 2015 are osram or Philips and I haven't been disappointed since.

Re:Detroit’s LED streetlights going dark after a few years by taneq on Tuesday May 07, 2019 @09:32PM (#19855141)
> If you cut corners on the power supply or thermal management, LEDs will burn out much quicker than older lighting technologies

Really? As an anecdatum, I replaced most of the lights in our house with cheap LED globes a few years ago and so far not a single one has failed. Maybe I'm just lucky. CCFL lamps, however, have been terrible while using 3x the power.

Re:Detroit’s LED streetlights going dark after a few years by CydeWeys on Wednesday May 08, 2019 @12:07AM (#19855783)
Fortunately, the ~10W LED bulbs commonly used in households don't put out enough heat to be a huge problem.

The streetlights are putting out a lot more power (and thus heat), and thus need much better thermal management, which it appears they don't actually have.

Re:Detroit’s LED streetlights going dark after a few years by bdamm on Wednesday May 08, 2019 @12:32AM (#19855894)
Plenty do. Just not the ones in Detroit. Presumably the problems extends to all users of the E-Cobra system. But I don't think this is a general industry problem in LED streetlighting. It surely is a problem in consumer LED fixtures.
Re:Detroit’s LED streetlights going dark after a few years by Spooky23 on Tuesday May 07, 2019 @11:55PM (#19855748)
I’ve seen both.

My theory is that they test them in lamps upright. I’ve noticed much higher failure rates with fixture based and inverted bulbs.

Re:Detroit’s LED streetlights going dark after a few years by dreamcompiler on Wednesday May 08, 2019 @09:19AM (#19858536)
Orientation can have a big impact on thermal profile and should be a consideration of thermal engineering.
Re:Detroit’s LED streetlights going dark after a few years by RRWagner on Tuesday May 07, 2019 @09:37PM (#19855163)
My anecdatum is that I bought CREE LED replacements about five years ago and I've had to replace more than a few already as they have started failing.
Re:Detroit’s LED streetlights going dark after a few years by xbmcuser on Tuesday May 07, 2019 @10:41PM (#19855478)
Led tech has improved in the last 5 years. So experience with led of 5 years ago might no be the same as led of today or even 3 years ago. My boss converted his house to led 5-6 years ago I did around 2 years ago. We had a huge discussion about it when our office was being renovated recently. He had to replace about half in the first couple of years of install I have had to replace none so far.
Re:Detroit’s LED streetlights going dark after a few years by inferiorhuman on Tuesday May 07, 2019 @11:54PM (#19855745)
I put a variety of LED bulbs (Ikea dumb + smart, Philips Hue, some no-name brand of T8 drop in replacements) about four years ago and only one (an early Philips Hue) has failed — even that's a soft failure. Meanwhile I've lost one T12 and one T8 in that period (despite only having four FL bulbs in service). Plenty of the LED traffic signals around here have dead LEDs though. Those lasted a surprisingly short amount of time.

The thing is, as bad as the waste is — I'd much rather chuck out LED bulbs than CFL/FL.

Re:Detroit’s LED streetlights going dark after a few years by foobarian on Tuesday May 07, 2019 @10:26PM (#19855403)
I had a few batches that failed at a high rate. The most interesting one was a fixture with 3 candle-format LED bulbs that all failed at the same time! Clearly some power surge/power supply related event.
Re:Detroit’s LED streetlights going dark after a few years by apple4ever on Wednesday May 08, 2019 @05:27PM (#19863142)
About 3 years ago I bought a ton (~20) of Cree LED lights. Almost all of them have failed at this point. The GE ones and the later Cree replacements have faired much better however.
Re:Detroit’s LED streetlights going dark after a few years by taneq on Wednesday May 08, 2019 @07:25AM (#19857793)
Hmm, mine were OMRON I think. Cost about AUD $5 each.
Re:Detroit’s LED streetlights going dark after a few years by benj111 on Wednesday May 08, 2019 @04:48AM (#19857025)
Judging by the contents of the bulb bin at the recycling centre, its recessed light fitting that do the damage to leds, which makes sense I suppose.

I've had 2 led failures since I went fully led 8 years ago, one went soon after purchase and looks like a manufacturing defect, so that leaves one that could potentially be heat. Most of them are no names, most recent are Phillips though.

Re:Detroit’s LED streetlights going dark after a few years by Gibbon1 on Wednesday May 08, 2019 @05:19AM (#19857172)
> its recessed light fitting that do the damage to leds

Heat is really ungood for LED's and the drive circuits[1]. With a recessed fixture there is no place for the heat to escape.

[1] I've noticed excepting electrolytic caps electronics that doesn't get warm, basically lasts forever.

Re:Detroit’s LED streetlights going dark after a few years by nashashmi on Tuesday May 07, 2019 @11:31PM (#19855644)
I paid 50 dollars per bulb for two bulbs about 8 years ago. They are still running. And then I paid 8 dollars for a bulb 6 months ago and it failed.

Or did it. I noticed that if you keep it on long enough after it turns off it will come back on. I think the fuse or something gets heated and it stops until it cools.

Re:Detroit’s LED streetlights going dark after a few years by war1025 on Tuesday May 07, 2019 @11:31PM (#19855645)
We had a loose connection of some sort in the electrical box to our house. Made for dirty power that fried probably 6 LED bulbs, and also the rectifier on our microwave.
Re:Detroit’s LED streetlights going dark after a few years by yason on Wednesday May 08, 2019 @01:46AM (#19856166)
Luckily, it was your LEDs that went. That's a very small problem to have if your house had a loose connection.
Re:Detroit’s LED streetlights going dark after a few years by gingabriska on Wednesday May 08, 2019 @03:02AM (#19856515)
In a recent power surge, most mobile chargers and LED bulb blew.

Nothing happened to incandescent bulbs or fan.

Luckily I had a power strip with surge protection on which all my expensive equipment were hooked. Power strip blew up but saved my equipments.

Edit: if you open your mobile charger you'll see 400v capacitor right after the bridge rectifier. On 220v mains this circuit needs to handle 310v but can survive upto 400v peak to peak.

But power surges can be more than 400v, and similarly the circuit in CFL or LED driver can only survive very low band of power surges.

Unless you've surge protectors in your house actively scrubbing mains dirty electricity, you'll see your LEDs will not survive long enough.

LEDs don't survive because driver quality sucks and can't deal with mains fluctuation, and LEDs are very sensitive to temperature and voltage, little change in temperate or voltage, will drastically change the current going through the LED and will burn them.

I solved the problem of continuously burning my LEDs by running low voltage DC lines and using 3 level surge protection in my house. Now, I've several mounts for LEDs with fans which keep the temperature in control.

You need serious cooling for anything over 5w led. I am using aluminium heat sink with fan and my LEDs don't die.

Re:Detroit’s LED streetlights going dark after a few years by dreamcompiler on Wednesday May 08, 2019 @09:26AM (#19858590)
> running low voltage DC lines

This is key and how all houses should be designed. All lighting circuits should be low voltage DC. This makes the individual drivers much simpler.

Re:Detroit’s LED streetlights going dark after a few years by inflatableDodo on Tuesday May 07, 2019 @06:08PM (#19853909)
Given how cheap the actual leds are, I am surprised people aren't saving money on power supplies and thermal design by wear levelling and redundancy.

edit - and small, you could dot a lot of spare leds around without a problem.

Re:Detroit’s LED streetlights going dark after a few years by emeraldd on Tuesday May 07, 2019 @06:30PM (#19854034)
This reminded me of Big Clive's youtube channel. https://www.youtube.com/channel/UCtM5z2gkrGRuWd0JQMx76qA

He does tear downs of consumer grade led lights for (mostly for the European/UK market since that's where he's based). It's interesting seeing some the iterations that "cheap" devices go through as they are refined to the bare minimum of cost.

Re:Detroit’s LED streetlights going dark after a few years by amelius on Tuesday May 07, 2019 @06:10PM (#19853927)
What are the requirements on the power supply?
Re:Detroit’s LED streetlights going dark after a few years by Itsdijital on Tuesday May 07, 2019 @07:53PM (#19854590)
In all honesty, good capacitors.

Good caps are expensive, and cheap alternatives are plentiful. Nine out of ten off the shelf LED drivers have cheap ass chinese caps in them.

You also need good overall thermal design, which means good heatsinks, which means chunks of metal, which of course are expensive.

It's entirely possible to make a driver that will outlive any LED it powers, it's just that nobody wants to pay for it.

Re:Detroit’s LED streetlights going dark after a few years by irq on Tuesday May 07, 2019 @08:06PM (#19854653)
I want to pay for it so bad though. I am sick of LED bulbs randomly dying and randomly making noises. Why isn't there a longevity-focused LED bulb brand?
Re:Detroit’s LED streetlights going dark after a few years by dreamcompiler on Tuesday May 07, 2019 @08:15PM (#19854704)
Longevity is antithetical to every accepted way of doing business nowadays because it doesn't generate a continuous revenue stream. Good luck getting capital to start a business based on products with longevity.
Re:Detroit’s LED streetlights going dark after a few years by chrisdhoover on Tuesday May 07, 2019 @08:44PM (#19854860)
Every? There are are buy-it-for-life producers. Examples, Alden shoes, Snap-on wrenches, Fluke meters. With most Toyotas and Hondas you’ll tire of them before they wear out if keep them minimally maintained. Basic kitchen equipment will not fail over several lifetimes. A moderately priced stainless pan will last. Decent knives will eventually wear away from repeated sharpening but I bet if you bought one today it would be in your estate as long as you don't use it for pry bar or a screw driver
Re:Detroit’s LED streetlights going dark after a few years by dsfyu404ed on Tuesday May 07, 2019 @10:04PM (#19855295)
All the brands you just listed are not examples of "buy it for life" engineering.

I dunno about the shoes but Snap On isn't really great quality anymore. The Chinese have closed the gap. Fluke, Honda and to a greater extent Toyota are all steadily moving toward more disposable products.

The cheap Chinese kitchen stuff you mentioned is actually the most durable item because in order to stand up to occasional abuse without being damaged it needs to be so overbuild that it can last lifetimes. That's simply a function of the design requirements, not any particular manufacturer's attitude though.

Re:Detroit’s LED streetlights going dark after a few years by benj111 on Wednesday May 08, 2019 @05:02AM (#19857087)
"Snap On isn't really great quality anymore. The Chinese have closed the gap" That doesn't mean Snap On isn't 'buy it for life' though. That means the Chinese are too.

You raise a good point though. Its very hard to evaluate a product that's supposed to last a life time, until you've had it a lifetime. So the benefits to a manufacturer are slow to accrue, but they're also slow to dispel, so there's massive temptation to cut corners and rely on that reputation, while lowering costs.

It'll be interesting to see how the EV market works out. You have a product that could last for life (with battery replacements). I suspect they'll be viewed, by the manufacturer at least, as disposable when the battery goes.

Re:Detroit’s LED streetlights going dark after a few years by acct1771 on Thursday May 09, 2019 @02:16PM (#19870699)
Snap On IS the Chinese.
Re:Detroit’s LED streetlights going dark after a few years by dreamcompiler on Tuesday May 07, 2019 @09:11PM (#19855009)
Fair point and good examples. But those are all old companies. How many new companies (companies formed in the last 10 years) make long-lived hardware products?
Re:Detroit’s LED streetlights going dark after a few years by xfitm3 on Tuesday May 07, 2019 @08:20PM (#19854732)
I really like Philips LED lights, but finding the right combination of a well designed power supply, thermal management, and high CRI is the elusive trifecta. It’s not surprising to give up one.
Re:Detroit’s LED streetlights going dark after a few years by stephen_g on Tuesday May 07, 2019 @09:16PM (#19855035)
If you're looking for installed units, I've been really happy with my Brightgreen LED downlights. Of course, I could have literally bought a box of 10 low-quality Chinese import downlights from the local lighting store for the price of two of these, but the high CRI and really high quality driver made it worth it for me.

Not sure what availability is like in the US and other countries though.

Re:Detroit’s LED streetlights going dark after a few years by Gibbon1 on Wednesday May 08, 2019 @05:21AM (#19857181)
My comment is for LED lighting the power supply and the LED's should be separate units.
Re:Detroit’s LED streetlights going dark after a few years by dreamcompiler on Tuesday May 07, 2019 @06:31PM (#19854041)
It has to be a good source of direct current, literally. It has to produce a steady, constant amperage regardless of grid spikes and fluctuations. Given that the grid is AC, this requires a relatively complex circuit and more careful engineering than is commonly done for the power supplies inside bulbs.

Edit: Sometimes LED current is actually high-current AC with a square waveform, especially with dimmable bulbs. This is fine provided it's well-regulated and protected from spikes.

Re:Detroit’s LED streetlights going dark after a few years by jcims on Tuesday May 07, 2019 @07:28PM (#19854418)
This is complicated by the fact that the temperature of the LED materially influences its electronic properties.

As a result you generally need to wire them in series rather than in parallel so that the current can’t differentially select the LED of least resistance and cause thermal runaway. Series wiring in turn cranks up the voltage requirements necessary to drive lots of power, requiring more costly components.

Oh, forgot to mention, different color LEDs have different forward current requirements, so have fun building a good and cheap driver for 100W RGBW.

Re:Detroit’s LED streetlights going dark after a few years by Itsdijital on Tuesday May 07, 2019 @07:46PM (#19854552)
Sort of, but not really.

LEDs can easily be wired in parallel as long as you use resistors to balance them. If you dial in the voltage real tight you can get away with minimal losses in the resistors. If you are really fancy you can use transistors and shunts to actively balance then for even more efficiency.

The reason why series is more popular is actually because it is cheaper and(can be) more efficient. It's not uncommon for cheap led lights to just throw 40 leds in series with a dead simple "driver" (read: rectifier, smoothing caps, and a resistor)to run it right off 120V.

Re:Detroit’s LED streetlights going dark after a few years by rahimnathwani on Wednesday May 08, 2019 @12:29AM (#19855876)
Re: your last sentence, does that mean the whole unit dies as soon as one LED fails?
Re:Detroit’s LED streetlights going dark after a few years by jcims on Wednesday May 08, 2019 @01:54AM (#19856207)
Not the person you’re replying to, but yes. Series config you lose the circuit if the LED fails open and it shuts the whole string down naturally.

Similar issues can affect parallel. If one LED fails open and you don’t adjust the current, you’ll start overdriving the other LEDs and shorten their lives...potentially dramatically. You could add current sense and shut down the board or even adjust current, but then costs go up.

Typical LED strips are small serial strings of typically three lights connected in parallel. That way if something goes wrong you knly lose a few lights.

Re:Detroit’s LED streetlights going dark after a few years by acchow on Tuesday May 07, 2019 @07:09PM (#19854296)
Can we design an LED that isn't affected by typical city fluctuations and spikes?
Re:Detroit’s LED streetlights going dark after a few years by Itsdijital on Tuesday May 07, 2019 @10:05PM (#19855300)
I'm not sure where the OP is coming from because any halfway decent LED driver will accept a wide range of voltages, far more than the fluctuations seen on public lines.
Re:Detroit’s LED streetlights going dark after a few years by Itsdijital on Tuesday May 07, 2019 @10:23PM (#19855390)
LEDs themselves are very intolerant of voltage (well really current fluctuations, semi-conductors are weird), but that isn't an issue because the driver deals with that and large swings will kill the driver or kill the driver and LED.

LED tolerance doesn't really play into the scenario here. It's all about the driver.

Re:Detroit’s LED streetlights going dark after a few years by dreamcompiler on Tuesday May 07, 2019 @10:20PM (#19855373)
I think he's asking if LEDs themselves can be more tolerant, since the drivers built in to LED bulbs rarely even rise to the level of "halfway decent."
Re:Detroit’s LED streetlights going dark after a few years by pixl97 on Tuesday May 07, 2019 @07:39PM (#19854497)
If you can, I'm sure someone would pay you a lot of money for the design.